Construction of Girls Toilet at Middle School Laigaripora

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing & Laying of hand packed stone soling including watering dressing and ramming with all carriages loading un-loading and stacking etc complete. As dirrected by E-I-C

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) crushed

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of cement concrete excluding the cost of centering, shuttering, finishing and reinforcement.All work upto plinth level in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) incl carriage .

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Brick work with common burnt clay ( non modualar) bricks of class designation 75 in foundation and plinth including curing in cement mortar 1:6 (1 cement :6 coarse sand) including carriage

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 100x10 mm

12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand)

Providing and applying wall putty of 2 mm thickness of approved brand and manufacture over plastered surface to prepare the surface even and smooth complete

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm)

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china orissa pattern W.C. pan of size 580x440 mm. with integral type foot rests

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing brass bib cock of approved quality. 19.9.1 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality , high or low pressure with plastic floats complete 15 mm nominal bore

Providing and fixing 100% stninless steel grating of upproved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works. 75 mm dia

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Single Socket 110 mm

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Single Socket 75 mm

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Plain Bend 110 mm (Type B)

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Door tee 110 mm (Type B)

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Coupler/socket 110 mm (Type B)

Providing and fixing uPVC SWR (soil, waste and vent pipes) Pipes Type B : Reducer / Eccentric Reducer 110 to 75 mm (Type B)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. external work-work incl. trenching, refilling etc. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixingPPR union 25 mm or male female sockets

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Carriage of material by Mechanical Transport including loading, unloading and stacking (Sand and aggregates below 40 mm nominal size for avg lead of 30 kms)

Carriage of material by Mechanical Transport including loading, unloading and stacking (cement 5 kms)

Carriage of material by Mechanical Transport including loading, unloading and stacking (steel 5 kms)