Karnataka

Active

Works

Water supply/sewage lines

PROVIDING BOREWELL AND WATER SUPPLY PIPELINE TO RURAL AREAS OF SHORAPUR CONSTITUENCY IN SHORAPUR TALUKA OF YADGIR DIST

Rural Drinking Water and Sanitation Department

RWSSD Division Office Yadagiri | Yadgir, Karnataka

Amount: ₹83.8 LCloses: 30 Jun 2026Due today

Tender Value

₹83.8 L

EMD Value

₹2 L

Closing Date

30 Jun 2026, 10:00 pmDue today

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Rural Drinking Water and Sanitation Department

Work Description

PROVIDING BOREWELL AND WATER SUPPLY PIPELINE TO RURAL AREAS OF SHORAPUR CONSTITUENCY IN SHORAPUR TALUKA OF YADGIR DIST

Tender Information

Tender ID

308777

Reference Number

RWSSD/2026-27/WS/WORK_INDENT9995/CALL-2

Tender Type

Open

Product Category

Water supply/sewage lines

Location

RWSSD Division Office Yadagiri

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredThe Contractor Should Scan the PRED/PWD Registration Certificate.

RequiredThe Contractor Should Scan the PAN Card & GST No. Certificate.

RequiredTenderer shall obtain the work done certificate 50 percentage of the amount put to tender in single work & of similar nature of work from the competent authority not below the rank of Executive Engineer District Level Officer and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. Last 5 financial years

RequiredQuantity wise work done As shown in bid document

RequiredThe contractor should have yearly turnover not less than the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 Turn over Certificate, Certified by Chartered Accountant

RequiredThe contractor must scan the Assessed available tender capacity

RequiredDetails of Ongoing Works

RequiredThe contractor should upload the Line of Credit for value not less than 30 Percent of the Amount put to Tender

RequiredA Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

RequiredContractor Postal Address and Mobile No

RequiredAs Per Bid Documents

RequiredDifference amount less DD, Demand Draft to be Scanned and uploaded at time of submmition of tender

RequiredFor Borewell Drilling works, The Bidder shall either possess a valid 7A Borewell Drilling license or Submit an MOU with a licensed Borewell Drilling Agency. The License copy and MOU shall be uploaded at the time of bid submission. Failure to submit above documents at the time of bid submission shall lead to rejection of bid.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Tenderer shall obtain the work done certificate 50% of the amount put to tender & of similar nature of work from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. (Last 5 financial years)

Third party consultants may be engaged for checking quality and quantity of work and to prevent any misuse. Proper reporting methods, through these agencies and their comments to be reviewed / addressed immediately at District level. Quality of work is of most importance

If any dates mentioned above happens to be a holiday, the next working day and the same time and venue holds good in lieu of the date mentioned

The contractor should scan the work done certificate, GST number, PAN and Registration certificates and other documents. If not scanned above certificates such tenders will be rejected

The authority competent to accept the tenders shall have the right of rejecting all or any of tenders without assigning any reasons and will not be bound to accept the lowest tenders

Materials like pipe, CI pipe, cement aggregate sand etc., required for the work shall be procured by the tenderer themselves and shall be of slandered quality as per IS specifications and should get tested by the quality control authority before used to the work at his own cost

The work will be placed under third party inspection

The lowest bidder will furnish security deposit amount before the work order is given or 20 days from the date of acceptance whichever is earlier(DD/FDR)

The contractor should have yearly turnover not less than Twice the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22 , 2022-23 , 2023-24, 2024-25 & 2025-26 (Turn over Certificate) (Certified by Chartered Accountant)

The contractor should upload the Line of Credit for value not less than 30% of the Amount put to Tender

Each Tenderer shall own or make arrangements for procuring the machineries required for executing the work & all the materials should be brought and used by the contractors and materials will not be supplied from the Department

The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately

Contractor should made an agreement within 14 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost

The contractor must scan the Assessed available tender capacity

Any over writing of civil engineering words and measurements should be clarified the considered department ( No claims should be considered)

Acceptance / Cancellation of the works are reserved by under signed without any reasons for the same

Corrigendum / modifications / correction, if any, will be published in the website only. More details should be collected from the office at working hours

The Department is not responsible for any delay in accessing e-procurement portal

The contractor should follow terms and conditions as specified in standard bid document KW 1, 2, 3 or 4 whichever may be applicable

After opening of Technical bid, eligible bidders work done if required will be sent to work done verification to concerned authority, more than 7 days for conformation delay of work done will be rejected

Tenderer must submit his present accurate postal address and phone / cell phone number

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form

All other conditions as per bid document and tender conditions

For Borewell Drilling works, The Bidder shall either possess a valid 7A Borewell Drilling license or Submit an MOU with a licensed Borewell Drilling Agency. The License copy and MOU shall be uploaded at the time of bid submission. Failure to submit above documents at the time of bid submission shall lead to rejection of bid.

Technical Criteria

Past Experience

Quantity wise work done (As shown in bid document)

Work Done Certificate

Tenderer shall obtain the work done certificate 50 percentage of the amount put to tender in single work & of similar nature of work from the competent authority not below the rank of Executive Engineer District Level Officer and scan the original certificated and attach the scanned file to the tender. The original certificate shall be produced at the time of opening of Tenders. Last 5 financial years

Work Done Certificate

Capabilities of Vendor

The contractor must scan the Assessed available tender capacity

Others -- BID CAPACITY

Details of Ongoing Works

Others -- Details of Ongoing Works

The Contractor Should Scan the PAN Card & GST No. Certificate

GST Registration

The Contractor Should Scan the PRED/PWD Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Others -- Borewell Drilling License

Financial Status

The contractor should upload the Line of Credit for value not less than 30% of the Amount put to Tender

Line of Credit

The contractor should have yearly turnover not less than the Amount put to Tender in any two financial years out of last 5 financial years. i.e. 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26 (Turn over Certificate) (Certified by Chartered Accountant with UDIN Number)

Audited CA Certificate of Annual Turnover

Others

Difference less Demand Draft to be Scanned and uploaded at time of submmition of tender

Others -- LESS DD

As Per Bid Documents

Others -- As Per Bid Documents

Contractor Postal Address and Mobile No

Others -- Contractor Postal Address and Mobile No

A Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

Others -- A Self Declaration stating that I / We have gone through all the Tender conditions and accepted them without any pre conditions

Fee & Financial Details

Tender Fee Amount

₹2,100

EMD Fee Amount

₹2 L

Important Dates

Last Activity

23 Jun 2026

Published

23 Jun 2026

Bid Opening

1 Jul 2026

Download Ends

23 Jun 2026

BOQ Preview

•

PROVIDING BOREWELL AND WATER SUPPLY PIPELINE TO RURAL AREAS OF SHORAPUR CONSTITUENCY IN SHORAPUR TALUKA OF YADGIR DIST

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Supply and delivery at site, the Indian Mark-II deep well hand pumps with IS Mark No.9301/1990 (3 amendments 2nd & 3rd Revision) and with latest amendments if any, comprising of 10 number of connectin...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Erecting and commissioning of new hand pump including fixing of GI pipes, fixing of hand pump to the borewell and giving satisfactory test etc.complete. (CSR 2023-24, Vol-5, Chapter-12, P.No.141, I.No...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Submersible Sables : Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its lates...

•

Pressure Gauge : Supply and delivery of 63mm dia. at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. (CSR 2023-24, Vol-5, Cha...

•

Gate Valve : Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm (CSR 2023-24, Vol-5, Chap-13, P.No.154, I.No.1...

•

Non-return Valve : Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm (CSR 2023-24, Vol-5, Chap-13, P.No...

•

Outdoor Type : Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammete...

•

Power Capacitor : Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...

•

MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...

•

Galvanized MS Tubes : Supply and delivery of 50mm dia. galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Main Connection : Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary ...

•

In G.I. Pipe : Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. (CS...

•

Pot Head : Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary material...

•

Earthing : Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of s...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Labour charges for laying and jointing GI pipes with earth work including fixing coller,elbow ,tee and other fittings. Conveying the material to site - MediumDuty GI pipe of 100mm dia (CSR 2023-24, Vo...

•

Providing wrought mild steel (galvanized) 100mm dia. GI collar confirming to IS 1239-II, 1991 with latest amendments if any. (CSR 2023-24, Vol-5, Chapter-11, P.No.129, I.No.11.6.9) including with all ...

•

Supply and delivery at site wrought middle steel (galvanized) 100mm dia. GI bend confirming to IS 1239-II, 1991 with latest amendments if any (CSR 2023-24, Vol-5, Chapter-11, P.No.130, I.No.11.8.9) in...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-3 CMIDP - SHORAPUR CONSTITUANCY- 9995.docx

Tender Document • 0.40 MB

CONDITIONS OF CMIDP - 2026-27.pdf

Instructions to Tenderers • 1.71 MB

00 loc.docx

Others - FORMAT OF LINE OF CREDIT • 0.01 MB

TENDER NOTIFICATION CMIDP CALL-2.pdf

Others - TENDER NOTIFICATION • 0.69 MB

Ready to Participate?

Download all tender documents and submit your bid