Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10 L
EMD Value
₹12,500
Closing Date
22 Jan 2024, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
PRABHAKARA PATIL
Provinding a High Mast Light To Ward No 06 Near Nekara Colony Banashankari Temple 2.Provinding a High Mast Light To Ward No 17 Near Kannada Sahithya Parishath
DMA/2023-24/EL/WORK_INDENT12080
DMA/2023-24/EL/WORK_INDENT12080
Reserved
Electrical
Two Tender Document System(Two Cover)
DMA Town Municipal Council Hagaribommanahalli
7 documents required · 7 mandatory
Valid PWD Electrical Contractor Registration Certificate
Reserved Category Certificate ST
To qualified for award of this contract each tenderer in its name should have in the last five years i.e.., 2018-19 to 2022-23 mandating satisfactory completion as a prime contract for at least any construction work extend of Rs 02.50 Lakhs
Scan Copies Of Original Documents of Valid GST Registration Certificate
Annual Turnover Certificate for Last Five Years 2018-19 to 2022-23 Certified balance sheet by charted accountant & Achieved at Last One Year an average annual financial turnover Rs 10.00 Lakhs
Liquid assets and or availability of credit facilities of not less than Rs 03.00 Lakhs in the form of credit lines or letters of credit all certificate from bank for meeting the fund required (Conditional Banker Certificate Not acceptable)
₹500
₹12,500
5 Jan 2024
5 Jan 2024
24 Jan 2024
19 Jan 2024
Provinding a High Mast Light To Ward No 06 Near Nekara Colony Banashankari Temple 2.Provinding a High Mast Light To Ward No 17 Near Kannada Sahithya Parishath
a 4.5.1 12 m/12.5 m - Top 100 mm and Bottom 310 mm dia Highmast Octagonal Pole:Fabrication, Supplying, Erection, Testing and Commissioning of...... ms long Polygon high mast with Single/Multiple teles...
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of
building, Irrigation works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Supplying and drawing Flexible Multicore Cable manufactured with
electrolytic grade flexible copper with low conductor confirming to
IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for
Wiring for lighting/power circuit using one of FRLS PVC insulated
1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and washers(COMMON SCHEDULE OF RATES FOR PWD Electrical 2023-24 ,Volume-6, P.No.14, I.N...
Supply and fixing of 3pole power contactor with NO/NC contacts on
existing wood/panel board using necessary bolts, nuts, washers
and wiring etc., complete with AC-3 Rating and as per IS-13947s(COMMON ...
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting(COMMON SCHEDULE OF RATES FOR PWD Electrica...
Fabricating supplying and mounting MS box made out SWG
suitable for floor /wall mounting, fully weather proof with provision
for better heat dissipation, provided with hinged front cover
equipped with...
Supplying and fixing telescopic M.S. bracket fabricated by using
0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long
M.S.Bracket and are welded with suitable angle, using 6mm thick M.
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over
existing pole / wall ceiling including clamps, bolts, nuts and wiring
using suitable capacity wiress
(COMMON SCHEDULE OF RATES FOR PWD ...
Supplying and fixing angle iron frame work fabricated out of M.S.
angle iron.. and M.S. Flat......with bolts, washers etc., and painted
with 2 coats of red oxide and then two coats of approved paint
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...
Digging of Pit for providing GI Pipe type Earthing Ordinary Soil (2023-24 SR BESCOM -4 Page No:01, I No:1.6.1)
16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)Heat resistant PVC
insulated, PVC exutruted Inner Seath
Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip
thickness and resistiv...
PVC Pipe as per IS-2509 PVC Pipe - 32 mm Dia (2023-24 SR BESCOM -3 Page No:15, I No:48.03)
GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,
3.2 mm thick with bolt, nut, GI Strips and washer
Minimum Weight of GI Pipe: 7.3 Kg (2023-24 SR BESCOM -3 Page No:17, I No:54.01)
Good Quality well burnt Charcoal for grounding
purposes packed in non returnable gunny bag of 30 Kg
each (2023-24 SR BESCOM -3 Page No:17, I No:54.02)
Good Quality Salt for grounding purposes packed in 50
Kg gunny bag (2023-24 SR BESCOM -3 Page No:17, I No:54.03)
Supply of LED floodlight luminaire with pressure die cast aluminium housing
body for optimal thermal dissipation. Lamp compartment comprising of anti
glare clear diffuser with Injection moulded polyca...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DTS of ward no 06,17 HIGH MAST indent no 12080 final.doc
Tender Document • 1.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .