Loading
Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical 16 NAVRANG SOCIETY BHAIRAVNATH CHAR RASTA MANINAGAR AHMEDABAD GUJARAT 380008 | AHMADABAD | GUJARAT | 380008 | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical NO 1 4 56 Y SRI BHARATHI NAGAR OPP PARVATHI THEATER CUMBUM ROAD THENKARAI PERIYAKULAM THENI DT 625 601 | PERIYAKULAM | THENI | TAMIL NADU | 625601 | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical 61 1ST CROSS BEHIND RAILWAY GATE ANJANAYA TEEMPLE NEW LAYOUT BINNYPET BANGALORE 560 023 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560023 | Admitted-Fee/PreQual/Technical |
| 4 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
₹17.2 L
EMD Value
₹34,400
Closing Date
17 Mar 2026, 6:00 pmClosed
GE North Bangalore
GARRISON ENGINEER NORTH BANGALORE T 64 MEANEE LINESMEG AND CENTRE BANGALORE 560042
REPAIR AND RECANNING OF WOODEN CHAIR OF SORTS REPAIR AND POLISHING OF WOODEN FURNITURE AND REPAIR AND PAINTING TO STEEL FURNITURE TRADE PATTERN FURNITURE AT DGQA NAVY AFSOD UNDER GE NORTH BANGALORE
2026_MES_753994_1
8299
Open Tender
Miscellaneous Works
Item Rate
180 days
Bangalore
Class E Category d(i)
7 documents required · 7 mandatory
₹500
Yes
GARRISON ENGINEER NORTH BANGALORE
₹34,400
Yes
2 May 2026
24 Feb 2026
19 Mar 2026
24 Feb 2026
17 Mar 2026
10 Mar 2026
24 Feb 2026 - 10 Mar 2026
Chair Dining FD-279 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw /bomboo pins and other members of the chair dining complete and all as specified and Shown on drg. Rear leg
As per item No 1 above but for Front leg
As per item No 1 above but for Seat frame front rail
As per item No 1 above but for Back rest
As per item No 1 above but for Seat frame Side rail
As per item No 1 above but for Seat frame Rear rail
As per item No 1 above but for Stiffener
As per item No 1 above but for PVC Bush
Chair Writing FD-280 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair writing complete and all as specified and shwon on drg. Rear leg
As per item No 9 above but for Front leg
As per item No 9 above but for Arms rest
As per item No 9 above but for Stiffener
As per item No 9 above but for Seat frame side rail
As per item No 9 above but for Seat frame Front/Back rail
As per item No 9 above but for PVC Bush
Chair Easy FD-229 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bamboo pins and other members of the chair easy complete and all as specified and shown on drg. Front leg
As per item No 16 above but for Rear leg
As per item No 16 above but for Front seat rail
As per item No 16 above but for Back seat rail
As per item No16 above but for Seat frame side rail
As per item No 16 above but for Top rail of back frame
As per item No 16 above but for Bottom rail of back frame
As per item No 16 above but for Side rail of back frame
As per item No 16 above but for Arms rest
As per item No 16 above but for PVC Bush
Removing of old unserviceable plastic cane from all sorts of chairs i.e chair dining, chair writing and chair easy etc (except chair verandah) including recaning with new cane of white colour of size 3 mm wide and 0.60 mm thick (flat) alround for border of seat and back and 2 mm wide and 0.40 mm thick half round for remaining portion, complete all as specified and as directed by Engineer-in-Charge. Chiar dining (FD-279)
As per item No 26 above but for Chair Writing (FD - 280)
As per item No 26 above but for Chair Easy (FD - 229)
Hat stand with Mirror FD-233 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw and other members of the Hat stand with mirror complete and all as specified and shown on drg. Mirror with new mirror 5 mm thick.
As per item No 29 above but for Aluminium hook
As per item No 29 above but for Edging
As per item No 29 above but for Front side made out of 4 mm thick ISI marked one side teak face veneer plywood.
As per item No 29 above but for Back made out of 6mm thick ISI marked Plywood commercial.
Peg Table (450 x 300 mm)(FD-277) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 450 x 300 x 18mm thick with 4 mm thick half round teak wood beading alround.
As per item No 34 above but for Front and back rail
As per item No 34 above but for Short rail
As per item No 34 above but for Legs
As per item No 34 above but for Short / Long stiffeners
As per item No 34 above but for S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
As per item No 34 above but for PVC Bush
Table 3' x 2' wooden FD-223 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 900 x 600 x 18mm thick with 4 mm thick half round teak wood beading alround.
As per item No 41 above but for Long rail
As per item No 41 above but for Short rail
As per item No 41 above but for Legs
As per item No 41 above but for Short / Long Stiffeners
As per item No 41 above but for S & F Second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
As per item No 41 above but for PVC Bush
Table Centre (900 x 450 mm) (FD-274) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 900 x 450 x 18mm thick with 4 mm thick half round teak wood beading alround.
As per item No 48 above but for Front and back rail
As per item No 48 above but for Side rail
As per item No 48 above but for Legs
As per item No 48 above but for Short / Long stiffeners
As per item No 48 above but for S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
As per item No 48 above but for PVC Bush
Table Dinning 08 persons (1800 x 900 mm) (FD-273) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 1800 x 900 x 18mm thick with 4 mm thick half round teak wood beading alround.
As per item No 55 above but for Front and back rail
As per item No 55 above but for Side rail
As per item No 55 above but for Legs
As per item No 55 above but for Top centre stiffeners of size 100 x 25mm
As per item No 55 above but for S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs, short rail to legs.
As per item No 55 above but for PVC Bush
Table Dressing Ladies with Mirror (MAP) FD/MAP/II/07 Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing and directed by Engr-in-Charge. Removing the existing unserviceable broken mirror and S&F new mirror 5.5mm of thick size 1250x440mm all as specified and shown on drawings
As per item No 62 above but for Removing the existing unserviceable frame of mirror and S&F new 1st class teak wood frame of size 45x35 mm and replace the worn out ply wood with 6mm plywood BWR Grade complete all as specified and shown on drawings
As per item No 62 above but for Replacement of unserviceable shutter with suitable paino type hinges of existing size fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick.
As per item No 62 above but for Replacement of old unserviceable plywood, 12mm thick, commercial on back side of the table complete.
As per item No 62 above but for Replacement of old unserviceable ply wood 4mm thick back side of the mirror complete.
As per item No 62 above but for Supply and fix new knobs shall be anodized 25 mm dia to be fixed with appropriate size of screw wood to drawer and shutter complete.
As per item No 62 above but for Replacement of old unserviceable top fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick fixed to timber framework with screws complete.
Dressing Mirror Gents (MAP) FD/E6/MAP/16 Removing old unserviceable parts and S & F new parts as size and shape including polishing complete all specified all shown on drawing. Mirror 5.5MM thick with back side ply and teak wood beading, make of Mirror modiguard / atul / swastik.
As per item No 69 above but for Side runner made of 18MM thick pre laminated MDF board (exterior grade).
As per item No 69 above but for TOP & bottom runner made of 18MM thick pre laminated MDF board (exterior grade).
As per item No 69 above but for Back side ply 12MM thick BWR as per IS 303 (7 Ply).
As per item No 69 above but for Glass shelf 4mm thick size as per existing.
Table Writing FD- 275/FD-249 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both sides of size 1145 x 600 x 18mm thick with 4 mm thick half round teak wood beading alround.
As per item No 74 above but for Front and Back Rail
As per item No 74 above but for Side rail
As per item No 74 above but for Legs
As per item No 74 above but for Short & Long Stiffner
As per item No 74 above but for Drawers of table as per drawing.
As per item No 74 above but for Cabinet Shutter/Door of table of size of 570mm x 405mm made out of 18mm thick prelaminated particle board (Exterior Grade) with teak wood beading shall be provided all round including continuous piano hinges 40mm wide upto Shutter height with screw.
As per item No 74 above but for Cabinet Sides of table made out of 18mm thick prelaminated particle board (Exterior Grade) duly fixed by screw.
As per item No 74 above but for Cabinet Back side of table made out of 6mm thick plywood to be fixed as per drawing.
As per item No 74 above but for Aluminium anodized knob 25mm of best quality.
As per item No 74 above but for Lock shall be of brass multipurpose 4 lever with duplicate key size 40 mm as shown in drg.
As per item No 74 above but for S & F Second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs, short rail to legs.
As per item No 74 above but for PVC Bush
Bed Hard Plytop (FD-246) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and directed by Engr-in-Charge. Plywood top 12mm thick of size bed hard complete 1830 x 900 mm. (BWR) as per IS-303 (07 ply).
As per item No 87 above but for Long rail of teak wood of size 100mm x 50mm x 1980mm.
As per item No 87 above but for Short rail of teak wood of size and shape as per drg.
As per item No 87 above but for Centre Stiffner
As per item No 87 above but for Ply wood 4mm thick teak faced to the direct vision of head rest and ply wood commercial 4 mm thick to other side including 12mm thick half round cut teak wood beading alround.
As per item No 87 above but for Foot rest.
As per item No 87 above but for Head board frame complete with legs 12mm dia half cut round teakwood beading.
As per item No 93 above but for Foot rest.
As per item No 87 above but for Leg to head rest side of bed.
As per item No 87 above but for Leg to foot rest side of bed.
Table Bed side FD-276 Supply and fixing the following new parts after removing broken parts including tightening with screw other members of the table bed side complete and all as specified and shwon on drg. 18mm thick pre-laminated particle board side runner including legs of table with 4mm thick teak wood beading alround.
As per item No 97 above but for 18mm thick pre-laminated particle board top side of the table made out of teak faced with 4mm thick teak wood beading alround. .
As per item No 97 above but for 18mm thick pre-laminated particle board shelves with bottom self of the table made out of teak faced.
As per item No 97 above but for Plywood 4mm thick commercial on back side of the table bed side .
Chair Dinning JCO/OR MAP FD/MAP-II/05 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening with screw/bomboo pins and other members of the chair dining JCO/OR MAP complete and all as specified and shown on drg. Rear leg
As per item No 101 above but for Front leg
As per item No 101 above but for Seat frame front/rear rail
As per item No 101 above but for Back rest
As per item No 101 above but for Seat fram Side rail
As per item No 101 above but for Stiffener
As per item No 101 above but for Taking down Unsv PVC seat from chair of shorts and refixing with best quality new PVC seat 4mm thick including holes & screwed with rail all as per drg.
As per item No 101 above but for PVC Bush
Teapoy Wooden (600 x 450mm) FD-278 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 600 x 450 x 18mm thick with 4 mm thick half round teak wood beading alround.
As per item No 109 above but for Front and back rail
As per item No 109 above but for Short / side rail
As per item No 109 above but for Legs
As per item No 109 above but for Short / long stiffeners
As per item No 109 above but for S & F Second class hard wood corner / bracket (L shape) of size 75 x 75 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.
As per item No 109 above but for PVC Bush
Chair Easy Cushioned (FD-358) Supply and fixing of the following new parts after removing broken/unserviceable parts of well seasoned teak wood including tighting other parts with screw/bamboo pins only of the Chair Easy Cushioned complete all as specified in drawing. Front leg
As per item No 116 above but for Rear leg incl back frame
As per item No 116 above but for Front & Back rail
As per item No 116 above but for Side rail
As per item No 116 above but for Removal of existing unserviceable seat & back cushion along with tapestry cloth/ Rexine cloth 180 GSM of Chair Easy cushioned and provision of new seat & back foam cushion 75mm thick of 32 density with new tapestry cloth / New rexine cloth of approved make/shade fixed on 12mm thick commercial plywood all as per drawing and as directed by Engineer-in-Charge
Sofa Set 5 Seater (TP) Removal of unserviceable seat and back rexine cloth/ taperstry cloth (180 GSM) and cushion of Sofa set 5 seater and S & F with new cushion 100mm thick of polyurethane foam density 40 Kg/ Cum (40 density) Make of foam Dunlop / sleepwell covered with new fabric of acrylic / polyester / polypropylene of rexine cloth / new tapestry cloth of approved make / shade duly providing quality all as specified and shown in drawing and as directed by Engr-in-charge
As per item No. 121 above but for Sofa set single seater
Table 3' x 2' (900 x 600 x 760 mm) with drawer and without drawer FD-283 & FD-284 Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Table top made of pre laminated particle board (exterior grade) with teak face both side of size 900 x 600 x 18mm thick with 4 mm thick half round teak wood beading alround.
As per item No 123 above but for Long rail
As per item No 123 above but for Short rail
As per item No 123 above but for Legs
As per item No 123 above but for Short / Long Stiffeners
As per item No 123 above but for S & F Second class hard wood corner / bracket (L shape) of size 100 x 100 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
As per item No 123 above but for PVC Bush
Table Dressing Ladies with Mirror FD-378 Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing and as directed by Engr-in-Charge. 5mm thick looking mirror for table dressing ladies fixed to the frame complete.
As per item No 130 above but for 5mm sheet glass of shutter size 280 X 265 mm including sliding wheel complete.
As per item No 130 above but for Plywood, 12mm thick, commercial on back side of the table complete.
As per item No 130 above but for Ply wood 4mm thick back side of the mirror complete.
As per item No 130 above but for New knobs aluminium anodized 25 mm dia to be fixed with appropriate size of screw wood to drawer and shutter of Cup Board.
As per item No 130 above but for Table top fabricated out of pre laminated particle board with teak veneers on one side and other side white 18/19 mm thick fixed to timber framework with screws complete.
As per item No 130 above but for New drawer of dressing table as per drawing.
Table Dressing Gents with Mirror FD-379 Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the table complete all as specified in drawing and as directed by Engr-in-Charge. Dressing table top or bottom fabricated out of pre-laminated particle board with teak veneers both side 18 mm thick fixed to timber frame work with screws complete all as shown on drawings.
As per item No 137 above but for Side rail fabricated out of pre-laminated particle board with teak veneers both side size of 18 mm thick fixed to frame work with screws complete all as shown on drawings.
As per item No 137above but for Plywood, 12 mm thick, commercial on back side of the table complete all as shown on drawings.
As per item No 69 above but for Aluminum anodized knob 25 mm of best quality.
As per item No 137 above but for Looking mirror 5.0 mm thick fixed to the frame of table dressing gents complete all as shown on drawings.
As per item No 137 above but for Table Drawers fabricated out of pre-laminated particle board 12mm thick for front side, 12mm thick plywood for side & back and 6mm thick plywood for bottom complete all as shown on drawings.
Table Dinging 06 Persons (1500 x 900 mm) (FD-273) Supply and fixing the following new parts after removing broken parts of well seasoned teak wood including tightening other parts with screw/bamboo pins only of the table complete all as specified in drawing directed by Engr-in-Charge. Table top new made of pre laminated particle board (exterior grade ) with teak face both side of size 1500 x 900 x 18mm thick with 04 mm thick half round teak wood beading shall be provided all round.
As per item No 143 above but for Front and back rail
As per item No 143 above but for Side rail
As per item No 143 above but for Legs
As per item No 143 above but for Stiffeners
As per item No 143 above but for S & F Second class hard wood corner / bracket (L shape) of size 150 x 150 x 25 mm thick and fitted with screw between long rail to legs short rail to legs.
As per item No 143 above but for PVC Bush
Sofa Set 2/4/5 Seats FD 281/373 Supply and fixing of the following new parts after removing broken/unserviceable parts of well seasoned teak wood including tighting other parts with cew/bamboo pins only of the sofa complete all as specified in drawing. Front legs for three/single seater sofa
As per item No. 150 above but for Rear legs for three/single seater sofa
As per item No 150 above but for Long front & Back rail for three seater sofa
As per item No 150 above but for Long front & Back rail for single seater sofa
As per item No 150 above but for Stiffner for three/single seater sofa
As per item No 150 above but for Side short rail for three/single seater sofa
As per item No 150 above but for Arms rest for three /single seater sofa.
As per item No. 150 above but Removal of unserviceable seat and back tapestry cloth and unsv cushion of sofa set three seater and supply and fixing with new cushion 550mm x530mm x100mm thick of 32 Density duly covered with well finished best quality tapestry cloth (250 GSM) of approved make/shade including providing quality ZIP all as specified and shown on drawing and directed by Engr-in-charge.
As per item No. 157 above but for replacing cushion and tapestry cloth for Sofa set 4 seater
As per item No. 157 above but for replacing cushion and tapestry cloth for Sofa set 5 seater
FD-246 Preparation of wood and wood based surfaces after removing stains through sand papering and rectifying the cracks by filling with beewax, rawsin and chalk powder etc, mixed with polish and applying french polish to achieve uniform texture and glossy finish to the following furniture :- Bed with plywood top
As per item No 160 above but for Chair dining (FD-279)
As per item No 160 above but for Side Board (FD-241)
As per item No 160 above but for Stool Dressing (FD-282)
As per item No 160 above but for Table dining 8 Pers, 1800x900x760mm (FD-273)
As per item No 160 above but for Table Dressing Ladies (FD-251)
As per item No 160 above but for Table writing (FD-249)
As per item No 160 above but for Teapoy (FD-278)
As per item No 160 above but for Chair Easy (FD-229)
As per item No 160 above but for Chair writing (FD-280)
As per item No 160 above but for Hat stand with mirror (FD-233)
As per item No 160 above but for Peg Table (FD-277)
As per item No 160 above but for Table Bed side (FD-276)
As per item No 160 above but for Table 3' x 2' with and without drawer (FD-283 / 284)
As per item No 160 above but for Chair Easy cushioned (FD-358)
As per item No 160 above but for Table dining 6 pers (FD-273)
As per item No 160 above but for Table writing (FD-275)
As per item No 160 above but for Sofa set 5 seater of 3 pcs (FD-281)
As per item No 160 above but for Table centre (FD-274)
As per item No 67160 above but for Table dressing gents with mirror (FD-379)
Table Office Officer steel (FD-1003) S & F new Table top made of 18 mm thick pre- laminated particle board (Exterior grade) size of 1500 x 900mm with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws incl taking down the unserviceable one complete
As per item No. 180 above but Repair to drawer/ shutter of the table by removing deep dents, welding of broken joints etc. complete all as specified.
As per item No. 180 above but S & F new lock of size 40 mm, 4 lever ISI marked with duplicate key incl taking down the unserviceable one complete all as specified.
As per item No. 180 above but S & F new drawer made out of 1 mm thick PGI sheet of size and shape as per existing complete duly painted with two coat of synthetic enamel paint of olive green shade incl taking down the unserviceable one complete all as specified.
As per item No. 180 above but S & F new PVC shoe of best quality incl taking down the unserviceable one complete all as specified.
As per item No. 180 above but Cutting and removing old unserviceable legs of table upto 100 mm long and providing new legs of MS Square pipe 25 mm having 1.6mm wall thickness as per existing including electric welding of loose / broken components by continuous welding around the broken joints and also replacement of old unsv minor required parts for item 18 to 23complete all as specified as directed by the Engineer-in-Charge.
Table Office Clerk Steel (FD-1004) S&F new Table top made of 18mm thick pre- laminated particle board (Exterior grade) of size 1200 mm x 760 mm with 4 mm thick half round teak wood edging shall be provided all around and fixed to frame with screws incl taking down unserviceable one complete.
As per item No. 186 above but Taking out old u/s drawers from the table and refixing the same after repair by proper welding denting and making the same proper functioning complete.
As per item No. 186 above but S & F new lock of size 40 mm, 4 lever ISI marked with duplicate key incl taking down the unserviceable one complete.
As per item No. 186 above but S & F new drawer made out of 1 mm thick PGI sheet of size and shape as per existing complete duly painted with two coat of synthetic enamel paint of olive green shade incl taking down the unserviceable one complete.
As per item No. 186 above but S & F new PVC shoe of best quality incl taking down the unserviceable one complete.
As per item No. 186 above but Cutting and removing old unserviceable legs of table upto 100 mm long and providing new legs of MS Square pipe 25 mm having 1.6mm wall thickness as per existing including electric welding of loose / broken components by continuous welding around the broken joints and also replacement of old minor required parts for item 1 to 6 complete all as specified as directed by the Engineer-in-Charge.
Teapoy Varandah (FD-383)/FD/E6/MAP/17 S & F in replacement of unserviceable Table top with new Table top made of 18mm thick pre- laminated particle board (Exterior grade) of size 900 x 450 mm with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws complete.
As per item No. 192 above but S & F in replacement of unserviceable PVC shoe with new PVC shoe (Round / squre type) of best quality complete.
As per item No. 192 above but S & F new mild steel flat iron and providing one additional stiffener on MS round bar 6mm dia to existing frame where required duly jointing by gas welding for item 10 to 12 complete all as specified as directed by the Engineer-in-Charge.
Almirah Medium Steel FD-1032 S & F new three way locking device including 8mm round double MS Rod incl taking down the unserviceable one complete.
As per item No. 195 above but S & F new lock of 6 levers and ISI mark lock with double keys of approved quality incl taking down the unserviceable one complete.
As per item No. 195 above but S & F new leg made out of 1 mm thick PGI sheet of size & shape as per existing incl taking down the unserviceable one complete.
As per item No. 195 above but S & F new MS cleat of suitable size to support shelf duly painted with two coats of synthetic enamel paint of olive green shade with nuts, bolts of suitable size including welding complete fixed in repairs.
As per item No. 195 above but S & F with new CP handle including nut, bolt & washer as approved complete fixed in repairs.
As per item No. 195 above but S & F new shelves made of mild steel sheet 1 mm thick duly painted with two coats of synthetic enamel paint of olive green shade with nuts, bolts of suitable size complete and all as specified as directed by the Engineer-in-Charge. Note:- The cost of welding loose / broken legs, corner, Shelves, hinges, door shutter of Almirah med steel and also replacement of old unsv minor required parts for item 21 to 21 as hinges small, MS sheet 1mm thick shall be deemed to be included in the Quoted rate complete and all as specified as directed by the Engineer-in-Charge.
Almirah Large Steel with Shelves (FD- 1031) S & F new three way locking device including 8mm round double MS Rod complete fixed in repairs.
As per item No. 201 above but S & F new lock of 6 levers and ISI mark lock with double keys of approved quality complete fixed in reapirs.
As per item No. 201 above but S & F new leg made out of 1 mm thick PGI sheet of size & shape as per existing complete fixed in repairs.
As per item No. 201 above but S & F new MS cleat of suitable size to support shelf duly painted with two coats of synthetic enamel paint of olive green shade with nuts, bolts of suitable size including welding complete fixed in repairs.
As per item No. 201 above but S & F in replacement of unserviceable CP handle with new CP handle including nut, bolt & washer as approved complete.
As per item No. 201 above but S & F new shelves made of mild steel sheet 1 mm thick duly painted with two coats of synthetic enamel paint of olive green shade with nuts, bolts of suitable size complete fixed in repairs. Note:- The cost of welding loose / broken like legs, corner, Shelves, hinges, door shutter of Almirah Large steel and also replacement of old unsv required parts for item 27 to 32 as hinges, MS sheet 1mm thick shall be deemed to be included in the Quoted rate complete and all as specified as directed by the Engineer-in-Charge.
Charpoy GI with plytop FD-220 Removing of unserviceable plywood from Charpoy GI Pipe, tightening of loose check nuts, elbows, long rails. Short rails, legs (i.e., complete charpoy) and supply and fixing the 12 mm thick 7 ply, commercial type BWR, exterior grade (water proof), ISI-303 marked of size 1980 x 900 mm fixed on top of GI Charpoy as shown on drawing with mild steel galvanized iron nuts & bolts of size 70mmx6mm with GI washer (heavy weight) and S & F three stiffner made out of MS flat iron 35 x 5 mm parallel to short rail duly painted black will be welded between the long rail where required including making 10 Holes each charpoy and as per specified in drawing.
As per item No. 207 above but for Supply & fix GI pipe 32mm dia medium grade for long rail 1980 mm length each and threading both ends as per drawing.
As per item No. 207 above but for Cutting the dismantled GI pipe 32mm dia long rail and modifying into one short rail and one leg. The short rail threading both ends as per drawing and legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed and specified in drawings.
As per item No. 207 above but for Cutting the dismantled GI pipe 32mm dia short rails and modifying into legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed. Note : Each leg shall be measured separately.
As per item No. 207 above but for Supply only GI elbow 32mm dia medium grade 3 way suitable for GI pipe charpoy conforming to relevant IS with ISI mark all as spcified and as directed by Engineer-in-Charge.
As per item No. 207 above but for Assembling the GI charpoy with serviceable members as retrieved new modified / supply only members as obtained vide Sl item No 29 to 32 here-in-before all as per drawing and as directed by Engineer-in-Charge.
Chair Computer/All type Revolving Chair/ sorts of Chair Revolving High Back (TP) M & L Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for seat and back of all type revolving chair including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood and PVC beading around the seat & back complete all as specified and as directed.
As per item No. 213 above but for Removing of existing old Tapestry/Fabric cloth only for seat and back of all type revolving chairs and provision of New seat and back of cloth with well finished best quality Tapestry/Fabric cloth not less than Rs 250/- per meter shade and quality including PVC beading around the seat and back complete as directed by Engr-in-charge
As per item No. 213 above but for M & L bottom base with steelness steel frame including twin castor wheel each chair five Nos (as approved) of all type revolving chair including taking out unserviceable bottom base with twin castor Wheel from Chairs, complete all as specified and as directed.
As per item No. 213 above but for M & L twin castor wheel only (as approved) of all type revolving chair including taking out unserviceable twin castor wheel only from Chairs complete all as specified and as directed.
As per item No. 213 above but for M & L Gas lifting hydraulic system of chair all type of revolving chairs taking out unserviceable Gas Lifting hydraulic System from Chairs complete all as specified and as directed.
As per item No. 213 above but for M&L soft handle of all type revolving chair as per existing including taking out unserviceable handle from Chairs complete all as specified and as directed. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.
Charpoy IP with ply top JCO's /OR's (CWE/FD-05/ CWE/FD-77) Removing of unserviceable ply wood from all type charpoy IP and fixing the new 12mm thick 7 ply, commercial type, BWR exterior grade (water proof), of size 1980 mm x 900 mm fixed on top with mild steel galvanized iron nuts & bolts with GI washer (Heavy weight) and including tightening with electric welding of loose long rail /short rail, legs, centre stiffner, Head rest and cleat of MS pipe by continuous welding around the broken joints and also replacement of old unserviceable above parts with new parts where required and also including painting with one coat of synthetic enamel paint (Black) after preparation of old painted surfaces with provding 04 Nos new hard rubber shoes to each charpoy at the bottom of legs after removing of old shoes complete and as specified and as shown on drg. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and washers, PVC shoes and painting of the all type charpoy IP to be included in the quoted rate.
Chair CBA Steel with Arms FD-75(M) Removing of old broken seat and S&F new seat of existing size with 50mm thick of 32 density made of cool foam cushion pasted with adhesive over 12 mm thick plywood(7 ply) BWR as per IS 303 commercial duly covered with well finished soft best quality leatherised rexine cloth including taking out unserviceable clit. M&L two numbers of MS flat Iron size of 535mm long x 25 mm width x 5 mm thick for fixed with continuous welding to seat frame of chair CBA steel both end and duly painted with one coat of synthetic enamel paint over one coat of red oxide primer duly making two hole for each flat for fixing seat with screw & washer complete.
As per item No.220 above but for Removing of old broken back and S&F new back of existing size with 50mm thick of 32 density made of cool foam cushion pasted with adhesive over 12 mm thick plywood(7 ply) BWR as per IS 303 commercial duly covered with well finished soft best quality leatherised rexine cloth including taking out unserviceable clit. M&L four numbers MS clit Iron size of 65mm long x 25 mm width x 5 mm thick for fixed with continuous welding to back frame of chair CBA steel and duly painted with one coat of synthetic enamel paint over one coat of red oxide primer duly making a hole for each clit for fixing back with screw & washer complete.
As per item No.220 above but for Removing of old broken Arms rest and S&F new Arms rest of existing out of second class hard wood with 15mm thick made of cool foam cushion pasted with adhesive over Arm rest duly covered with well finished soft best quality leatherised rexine cloth 2mm thick and fixing with suitable screw & washer complete.
As per item No.220 above but for S&F PVC cap at the top of back steel pipe of chair CBA steel with arms as shown on drawing No FD-75(M) including takingout unserviceable cap complete.
As per item No.220 above but for S&F hard rubber shoe superior quality (as approved) fixing to leg of chair CBA steel with arms as shown on drawing No FD-75(M) including takingout unserviceable shoe complete.
As per item No.220 above but for M&L removing/scrapping old worn out paint from exposed steel frame of Chair CBA steel with arms as shown on drawing No FD-75(M) by sand paper/scrapper and applying two coat grey/OG colour Synthetic Enamelled paint (as approved) by spray painting machine complete and item ser No 15(a) to (f) all as directed and specified in drawings. NOTE: Cost of minor repair like welding to frame, screw with washer if required etc, shall be deemed to be included in the quoted rate.
Chair Writing MAP Steel (FD/E6/ MAP/12) S & F Tapestry / Fabric cloth over sythetic foam 25mm thick (as approved) for seat and back with hot pressed 12mm Plywood of chair writing including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs and seat 12mm hot pressed plywood including PVC beading around the seat and back complete as directed by Engr-in-charge.
As per item No. 226 above but for Removing of exissting old Tapestry/Fabric cloth only for seat and back of all type of chair writting MAP steel and provision of New seat and back of cloth with well finished best quality Tapestry/Fabric cloth not less than Rs 250/- per meter shade and quality including PVC beading around the seat and back complete as directed by Engr-in-charge
As per item No. 226 above but for S & F soft handle of chair writing including taking out unserviceable handle from Chair including welding of broken joints and painting of steel frame surface of the chair with one coat of synthetic enamel of black shade complete all as specified in drg. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.
CHAIR VERANDAH (FD- 256) Taking down unserviceable cane from chair verandah and re-caning with best quality new plastic cane of 3.50 mm/ 4 mm wide plastic cane as per pattern including applying two coat of white synthetic enamel paint of superior quality to chairs as per drawings all as specified and as directed by Engineer-in-Charge
As per item No. 229 above but for Continuous welding 20mm dia MS tube at hand rest frame joint, seat frame joint, back frame joint and seat to back frame stiffener joint of chair verandah all as per drawing duly painting the affected portion with two coats of synthetic enamel paint(White) over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge
As per item No. 229 above but for Provision of PVC bush hard of white colour approved make, fixed to legs of chair varandah including taking down old one as per drawing all as specified and as directed by Engineer-in-Charge.
Rack Shoes Steel (FD/E6/MAP/02) Taking down unserviceable grid mess made out of 3mm dia MS rod from rack shoe steel and S & F new grid mess made out of 3mm dia MS rod including applying one coat of black synthetic enamel paint of superior quality to Rack shoes steel as per drawings all as specified and as directed by Engineer-in-Charge.
As per item No. 232 above but Taking down unserviceable PVC shoes from Rack shoe steel and S&F best quality new PVC shoes 25 mm dia.
As per item No. 232 above but Cutting and removing old unserviceable legs of table upto 100 mm long and providing new legs of MS round pipe 25 mm having 1.6mm wall thickness as per existing including electric welding of loose / broken components by continuous welding around the broken joints and also replacement of old minor required parts complete all as specified as directed by the Engineer-in-Charge.
Rubbing and removing dents, if any & then preparation of old painted steel surfaces with putty Med Steel and spray painting with two coat of olive green synthetic enamel paint to entire external and internal compete all as specified and as directed by Engineer-In- Charge Almirah medium steel. (FD-1032)
As per item No. 232 above but Almirah large steel w/Shelves (FD-1031)
As per item No. 232 above but Table office officer steel. (FD-1003)
As per item No. 232 above but for Table office clerk steel. (FD-1004)
As per item No. 232 above but for Rack steel adjustable / closed 6 Tier (FD-1038)
As per item No. 232 above but for Rack side steel with tray (FD-1023)
As per item No. 232 above but for Chair CBA steel With Arms (FD-75M)
As per item No. 232 above but for Rack Steel Stationery (FD-81)
As per item No. 232 above but for Stool steel (FD-81(M))
As per item No. 232 above but for Teapoy verandah (FD-383, FD/E6/MAP/17)
As per item No. 232 above but for Almirah Glazed Steel (FD-104)
As per item No. 232 above but for Book case steel (FD-1028)
As per item No. 232 above but for Trestle store room iron (FD-1043)
As per item No. 232 above but for Locker Steel (FD-1029)
As per item No. 232 above but for Rack Shoes Steel (FD/E6/MAP/02)
stage.html
html • 0.03 MB
tech_bid_open.pdf
cancelled_1.pdf
pdf • 0.18 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
BOQ_844527.xls
BOQ • 0.40 MB
8299Tender.pdf
Tender Documents • 0.97 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .