CLEANING AND REPAIR OF SEWAGE LINE, MANHOLES, SEPTIC TANKS AND SOAKAGE WELLS AND ALLIED WORKS IN ZONE B AT MIRAN SAHIB UNDER GE JAMMU

Amount

Cleaning and clearing the blockage of sewage lines of any dia, type and any depth, removing any type of blockage by roding from main holes or by flushing water with pressure pump complete all as specified and as directed.

Taking out of solid / semi solid sludge from existing main holes of any size and any depth and burying the entire sludge / sludge water into excavated pit of adequate size including excavation and covering with earth or disposing off into covered vehicles outside the peripherry of defence land to a distance exceeding 1 KM including taking off RCC / iron main holes covers and refixing the same after clearing complete all as specified and as directed.

Cleaning of blockage of EWC / IWC / Urinal / Bathroom / Kitchen and gully trap and removing of sludge / spoil / waste to distance exc 100 mtr and testing of WC Block for proper working after cleaning complete all as specified.

Notes: - For Ser Item No 1.00 to 3.00: - (i) For the purpose of payment, cleaning of sewage lines and upto including 1st manhole shall be measured as one job. (ii) The contractor will employ two safaiwalas alongwith necessary T&P on all working days for the period of contract for attending the sewage related complaints for buildings where machine cannot be reached. The complaints will be collected by the contractor or his accredited representative on all working days from B/R complaint cell. Complaints will be got signed by the authorised users representatives and will be returned to B/R complaint cell after completion of the complaint. No complaint shall be kept pending or unattended for more than 24 hours.

Cleaning of septic tanks upto and including 25 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.

Cleaning of septic tanks exceeding 25 users upto and including 50 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.

Cleaning of septic tanks exceeding 50 users upto and including 100 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.

Cleaning of septic tanks exceeding 100 users upto and including 200 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.

Cleaning of septic tanks exceeding 200 users upto and including 250 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.

Notes: - For Ser Item No 5.00 to 9.00: - (i) The sewage line is required to be cleaned by using water jetting machine as directed by Engineer-in-Charge. The unit rate quoted by the contractor shall deem to be included of this provision and no extra claim on this account shall be entertained by the department. Jetting machine will be compulsory minimum three times a week otherwise one day recovery of Rs. 10,000/- will be deducted from the payment due to the Contractor. (ii) Contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction / jetting machine. (iii) Manual cleaning operation / Scavenging is prohibited. (iv) The unit rate quoted by the contractor shall interalia deemed into the cost of providing skilled driver and operator and supervising engineer including provn of water for jetting and removal of sludge / silt / liquid / mud and sand (in foul position) etc complete all as specified. (v) Contractor shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No / Vehicle No etc for their record and prior approval. (vi) The T&P as and when brought by the contractor based on site requirement, the concerned site executive shall take a photograph of machine along with the supervising staff i.e. JE's and contractor's representatives etc and same shall be kept in record with date. (vii) Pucca bound register shall be maintained showing the machine no / vehicle no and their deployment at site mentioning time and date duly signed by concerned JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the contractor.

Excavation in trenches not exceeding 1.5m wide, not exceeding 1.5m in depth for foundation, etc, or for shafts, wells cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in any type of soil complete all as per specified and as directed.

Description all as per Ser item No. 11.00 here-in-before but depth exceeding 1.5m and not exceeding 3 metre complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removal of surplus excavated soil to a distance exceeding 250 m and not exceeding 500m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Demolition / breaking of drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as specified of 150mm / 200 mm dia pipe including demolition of cement concrete bed / haunching etc complete all as specified and directed.

Material and labour for concrete bed to 200 mm bore pipe (1:4:8) in type D-2 (using 40mm graded crushed stone aggregate) including haunching against the sides of pipe complete all as specified and directed.

Material and labour concrete bed to 150 mm bore pipe (1:4:8) in type D-2 (using 40mm graded crushed stone aggregate) including haunching against the sides of pipe complete all as specified and directed.

Supply and fixing and laying 200 mm thick reinforced concrete pipes class NP-2 laid and jointed complete with collars as in trenches complete all as specified and directed.

Supply and fixing and laying 150 mm thick reinforced concrete pipes class NP-2 laid and jointed complete with collars as in trenches complete all as specified and directed.

Material and labour for 150mm dia salt glazed stoneware drain pipes laid in trenches in concrete padding jointed in cement mortar (1:1) complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

Description all as per Ser item No. 22.00 here-in-before but except bricks complete all as specified and directed.

Material and labour cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in coping of manholes complete all as specified and directed.

Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for providing precast cement concrete in cover slab (for manhole) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar (1:4) complete all as specified and directed.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia or securing with clips conforming TMT bars complete all as specified and directed.

Description all as per Ser item No. 28.00 here-in-before but mild steel round bars 10mm dia and over as in manholes cover handles, steps, clamps etc. complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required of 150mm/200mm dia pipe complete all as specified and directed.

Taking up or down PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints and removing lead of 100/75mm dia pipe complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75mm dia complete all as specified and directed.

Supply and fixing in repair stacks clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of any bore pipe complete all as specified and directed.

Supply and fixing 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and directed.

Supply and fixing PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube supplying and fixing in opening as per specification complete all as specified and as directed.

Supply and laying factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at sie as per specification clause No 8 B.1 to 8 B.10 and drawing on Page No 156 of MES SSR-2020 Part-II complete all as specified and as directed.

Supply and fixing in repair box type steel Ventilator (factory made) outer frame made out ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii)10 mm Square Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Supply and fixing 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fixing Aluminum, anodized, barrel towers bolt of extruded section and fixed 150 mm size complete all as specified and as directed.

Supply and fixing for Aluminum, anodized extruded section, 150mm long handles fixed to door complete all as specified and as directed.

Supply and fixing in repair water closet white vitreous china ware Orissa pattern of size 580 x 440mm with integral foot rest 'P' or 'S' trap front or back intlet including provision of PCC (1:2:4) type B-1 and provision of cement concrete bedding and making good the dismantled surface and connection flush pipe (rate also including for taking off unhygeinic old water closet) 15mm dia PVC connection 450mm long complete all as specified and as directed.

Supply and fixing in repair Vitreous China wash down water closet pan pedestal pattern white (excluding fixing bolt, flushing cistern, flush pipe) complete including water closet seat cover and flush pipe of PVC 32mm dia for low level cistern complete all as specified and directed.

Dismantling stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and as directed.

Demolition cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for providing 75 mm thick plain cement concrete mix (1:4:8), type D-2 (using 40mm graded crushed stone aggregate) as sub-base floor complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) laid in panels in floor finshed even and smooth without using extra cement complete all as specified and as directed.

Material and labour for providing cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 20 mm thick for finishes in cement mortar (1:6) screed bed for laying floor finishes complete all as specified and as directed.

Material and labour for exterior grade full body vitrified tiles matt finished 400 x 400 x 12mm thick set jointed in neat cement slurry and pointed with grey cement and pigments to match the shade of tile pattern as approved in floors including 15mm thick screed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and as directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Laying only machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade (serviceable tiles retrieved from item No 48.00) including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks and filling the joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand sand complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surface in patches mixing with water proofing compound as per manufacturer's instruction including necessary scaffolding etc surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: - Water proofing compound shall be measured and paid separately under respective item.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for preparation of newly plastered surface of any description and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of old plastered surface of any description and applying one coat of cement based paint complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and directed.

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

ASHFAQ AHMED MANHAS

Bidder Name

ASHFAQ AHMED MANHAS

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS