Operation and Maintenance of Electro mechanical installations along with allied works at Pumping Station RRL, Canal Road, Jammu. Contract No SDJ/W/18/ 2025-26

Amount

Operation & Maintenance of Electro Mechanical installations by way of Earth work for excavation of trenches/pits 6 Nos. of size (2’.0” x2’.0” x 3’.0”) inside the open area within RRL pumping station and removal of excavated material and then disposing off the same at permissible dumping place. The job involves construction of concrete Blocks 6 nos. of finished size for anchoring of vertical M.S. Channels of 100mm x50 mm x 6mm sections. Laying of crushed stone with concrete mass of 1:2:4 and laying of M.S angle (40mmx40mmx6mm) mesh throughout the blocks and cement concrete to be properly grouted within the blocks after laying of MS columns with complete plastering/finishing including engagement of labour for complete job at site with transport charges for shifting of material at including curing of 6 nos. of blocks.

Repairing of gantry structure by way of Providing and laying of 12 No.s ISMC of size 100mm and 10 ft in total height including grouted length and 12 No.s M.S square plate (0.25m x 0.25m) be fabricated at site. The job includes erection works at site by way of fabrication of 6 no. columns of 10 feet total length by welding two no. 100 mm MS channels for each column. Erection of columns by welding top and bottom end of 6 No. columns with 12 No sq. plates by way of using special electrodes. Job further includes erection of the channels in the laid pits by utilizing manual labour along with tools and tackles for said job. Filling of 6 No pits inside the open area within RRL pumping station with cement concrete mix done at site and erecting the 6 No. vertical columns in the pits then welding of 3 No. channels horizontally on 2 No. M.S. Pillers each.laying of 1 No ISMB of size 200mm of length 20 ft on top of opposite pair of columns and welding it on top of vertical columns with M.S square plates. Job also involved providing and fitting of 2Ton, 6mts chain pulley block (Indef , Harcules or any other reputed make) along with horizontal movement mechanism on the overhead gantry, testing and commissioning of the same. Scrubbing the surface of columns and beams of gantry arrangement with sand paper for smoothening the surface then applying one coat of primer and two coats of paint. The job included the cost of material, labour charges for fabrication of overhead gantry and welding set & Oxy-acetylene gas equipment, transportation charges, skilled /semiskilled labour charges at the site of installation. Complete job at RRL pumping station

Repairing of foundation block by way of relaying of new RCC block of size 4 ft X 4 ft as per the size of the base plate (Base plate to be fabricated out of 100 mm x 50 mm MS Channel) of the pumping unit to be installed in cement concrete work in 1:1½:3 ratios for attaining required strength. It includes providing, straightening, cutting, bending, binding and laying in position of 10mm dia reinforcement steel including shuttering proper curing and finishing of exposed portion. The job includes fabrication and erection in position of anchor bolts with one end threaded and other end at the base concreted with the anchoring. The job may include any other fabrication work required for proper fitting/alignment of pumping unit as per site conditions. The foundation bolts are to be welded to steel reinforcement of foundation block in proper alignment and spacing with respect to base frame properly leveled and sealed to the required position, placing of base frame on newly constructed RCC foundation block after proper finishing of the constructed block.Job includes cost of material, carriage charges including headload charges, labour, consumable and hire charges and mobilization of connected machinery/equipment, handling, loading, unloading, transportation, stacking and repair to surrounding floor damaged during dismantling and installation work.

Repairing of damaged path/ walkway by Providing & laying in position cement concrete of specific grade excluding the cost of centring & shuttering-All works upto plinth level 1:1.5:3 (1 cement :1.5 Coarse sand:3 graded stone) slab thickness 0.15m.

Rainforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically treated bars (Rate to include cost of binding wire)

Carriage of material from to site of work,Sand for 10 KM by MT

Repair of existing truss and frame work, including the dismantling and cutting of a 10 ft x 10 ft G.I. shed. The work involves: Cutting and removal of old/damaged galvanized iron (GI) sheets from the existing shed structure. Replacement of truss/frame components as required, ensuring structural integrity is maintained. Supply and fixing of 4 Nos. of new color-coated galvanized iron sheets, each of size 3.6 meters x 1 meter (~12 ft x 3.3 ft), totaling approximately 14.4 square meters of sheet coverage. Proper alignment, fastening, and sealing of the new sheets using suitable screws, washers, and sealants to ensure weatherproofing and durability. All necessary scaffolding, tools, and safety measures to be included in the scope.

js electrical and machanical works (BID ID -2457462)

Shivam enterprises (BID ID -2459973)

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS (BID ID -2459965)