REPAIR REPLACEMENT OF EXTERNAL WATER SUPPLY ITEMS SUCH AS CI CONTROL VALVE CI GI DI PIPES VALVE CHAMBER PUMP SETS CONTROL PANELS AND CLEANING OF OHT UNDERGROUND SUMPS ETC AND REPAIRS SERVICING OF DG SETS AMF PANELS SOLAR LIGHTS SOLAR WATER HEATERS

Amount

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in hard/ dense soil for laying of GI/DI Pipe all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 Cms thickness all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Dismantling the existing broken valve chamber completely and construction of new valve chamber having inner dimension 750mm x 750mm x 600 mm suitable for upto 50 mm gate valve with PCC 1: 4: 8 type D2 for foundation, using 40mm graded stone aggregate brick work in cement mortar (1:4), PCC 1: 2: 4 type B1 using 20mm graded stone aggregate for coping, rendering in CM 1:4, 15mm thick including provision of MS Sheet top cover 3.15 mm thick with brazing of MS flat of size 25 mm x 4mm at edges and in diagonal and angle iron base frame of 40 x 40 x 5 mm, painting with two coats of synthetic enamel paint over a coat of red oxide primer and locking arrangements including necessary excavation earth work complete all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 15mm dia complete all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 20mm dia complete all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 25mm dia complete all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 80mm dia all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 100mm dia all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 150mm dia all as specified and directed.

Ductile iron pipe 80mm bore dia, spigot and socket ends, class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Ductile iron pipe 100mm bore dia, spigot and socket ends, class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Ductile iron pipe 150mm bore dia, spigot and socket ends, class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the pipe line of the old CI/ DI pipe in trenches / above the ground level of any length of size 80mm dia bore all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the pipe line of the old CI/ DI pipe in trenches / above the ground level of any length of size 100mm dia bore all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the pipe line of the old CI/ DI pipe in trenches / above the ground level of any length of size 150mm dia bore all as specified and directed. Note for item No 14 to 16: Joint and specials shall be measured and paid seperately

Ductile iron specials such as bends, tapers, tee pieces (single and double branch) any type and angle / radius and straight connecting piece but all ends socketed / flanged of size 80, 100 to 150mm dia bore all as specified and directed.

Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 80mm dia bore including fixing and testing complete all as specified and directed.

Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 100mm dia bore including fixing and testing complete all as specified and directed.

Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 150mm dia bore including fixing and testing complete all as specified and directed.

Run lead joint for CI/DI spigot and socket pipe line of size 80mm dia bore all as specified and directed.

Run lead joint for CI/DI spigot and socket pipe line of size 100mm dia bore all as specified and directed.

Run lead joint for CI/DI spigot and socket pipe line of size 150mm dia bore all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia and connections including cleaning for refixing or removing from site all as specified and directed

Taking up or down steel tubing and connections for 25mm dia and connections including cleaning for refixing or removing from site all as specified and directed

Taking up or down steel tubing and connections for 40mm dia and connections including cleaning for refixing or removing from site all as specified and directed

Taking up or down steel tubing and connections for 50mm dia and connections including cleaning for refixing or removing from site all as specified and directed

Taking up or down steel tubing and connections for 80mm dia and connections including cleaning for refixing or removing from site all as specified and directed

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 20mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 25mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 40mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 50mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 80mm bore all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the old steel tubing and connecting with new accessories (sockets, elbow and union etc and cutting the rusted out thread and making new thread) in new or old position (walls, ceiling, floors and trenches) for size 20mm dia all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the old steel tubing and connecting with new accessories (sockets, elbow and union etc and cutting the rusted out thread and making new thread) in new or old position (walls, ceiling, floors and trenches) for size 25mm dia all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the old steel tubing and connecting with new accessories (sockets, elbow and union etc and cutting the rusted out thread and making new thread) in new or old position (walls, ceiling, floors and trenches) for size 40mm dia all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the old steel tubing and connecting with new accessories (sockets, elbow and union etc and cutting the rusted out thread and making new thread) in new or old position (walls, ceiling, floors and trenches) for size 50mm dia all as specified and directed.

Refixing and testing after cleaning / removing clogged mud inside the old steel tubing and connecting with new accessories (sockets, elbow and union etc and cutting the rusted out thread and making new thread) in new or old position (walls, ceiling, floors and trenches) for size 80mm dia all as specified and directed.

3 Layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion elded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size 25mm dia all as specified and directed.

3 Layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion elded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size 40mm dia all as specified and directed.

3 Layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion elded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size 50mm dia all as specified and directed.

Taking out existing unserviceable gunmetal gate valve of size 50/40/25/20 mm dia after dismantling existing union, nipple and cutting the rusted out thread and making new thread for inserting new gate valve all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 50mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 40mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 25mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia all as specified and directed.

PP-R gate valves (Brass insert) as per requirement of the site of size 50mm dia all as specified and directed.

PP-R gate valves (Brass insert) as per requirement of the site of size 40mm dia all as specified and directed.

PP-R gate valves (Brass insert) as per requirement of the site of size 25mm dia all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 80mm dia all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 100mm dia all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 150mm dia all as specified and directed.

Cutting PCC paving / road etc not exceeding 30cm thick for laying of Pipe all as specified and directed.

PCC 1:2:4 type B-1 using 20mm graded stone aggregate 100mm thick for making good road, finished fair and even all as specified and directed.

Cleaning and removing all scales/ dirt / mud, sediment silt from UG sump of capacity 100000 Ltrs at Ava Hill, Stable Hill, Singarathope pump houses and applying two coats of white wash internally complete all as specified and directed

Cleaning and removing all scales/ dirt / mud, sediment, silt from OHT of 10000 glns capacity at EME work shop, CSQ, Ava Hill, Stable Hill and applying two coats of white wash internally all as specified and directed.

Cleaning and removing all scales/ dirt / mud, sediment, silt from UG sump of GE Reservoir of 240000 Ltrs capacity and applying two coats of white wash internally complete all as specified and directed.

Cleaning and removing all scales/ dirt / mud, sediment, silt from OHT of 30000 glns capacity at MH and applying two coats of white wash internally including some plastering work for preparation of surface all as specified and directed. all as specified and directed.

Cleaning and removing all scales and dirt, etc. from 500 ltrs capacity tanks and from mouth of circulating pipes, etc. all as specified and directed. Note for item No 55 to 59: After cleaning the tank, Date of cleaning shall be written on the tank by using stencil with synthetic enamel paint as directed.

Disconnecting the electric motor of capacity 10HP from position, strip opening the motor, taking out burnt copper winding wire from slots, cleaning the slots, rewinding the motor with suitable gauge of copper winding wire, insulating and vernishing, baking, including supply and replacing the bearings and refixing the motor with proper alignment with pump set, connecting up the electric connections testing, commissioning and transporting complete all as specified and directed.

All as per item No 60 hereinbefore but 15HP motor all as specified and directed.

All as per item No 60 hereinbefore but 25HP motor all as specified and directed.

All as per item No 60 hereinbefore but 40HP motor all as specified and directed.

All as per item No 60 hereinbefore but 30HP motor all as specified and directed.

All as per item No 60 hereinbefore but 2HP motor all as specified and directed.

All as per item No 60 hereinbefore but 1HP motor all as specified and directed.

Supply only Set of 02 bearing (02 Nos) of motor capacity 40HP all as specified and directed.

Supply only Set of 02 bearing (02 Nos) of motor capacity 25HP all as specified and directed.

Supply only Set of 02 bearing (02 Nos) of motor capacity 15HP all as specified and directed.

Supply only Set of 02 bearing (02 Nos) of motor capacity 10HP all as specified and directed.

Supply only Set of 02 bearing (02 Nos) of motor capacity 2HP all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 40HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paint etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Key suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Coupling set suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only rubber bush with bolts, nuts, washers and spring washers suitable for centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 25HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 15HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 15HP all as specified and directed

Dismantling the defective centrifugal pump set, multi stage of capacity 10HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 10HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 10HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 10HP all as specified and directed

Fully Automatic Star Delta Starter 10 to 15 HP type ML 1.5 current rating 10 to 25 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed. Make L&T Cat No. SS94362 or equivalent in ABB/ Siemens.

Fully Automatic Star Delta Starter 25 HP type ML-2 current rating 25 to 40 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed. Make L&T Cat No. SS94366 or equivalent in ABB/ Siemens.

Fully Automatic Star Delta Starter 40 HP type ML-3 current rating 35 to 65 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) all as specified and directed. Make L&T Cat No. SS94021 or equivalent in ABB/ Siemens

Three core flat PVC insulated Copper Cable, nominal area of conductor 4 Sqmm, 1100 volts, conforming to IS:694 all as specified and directed.

Three core flat PVC insulated Copper Cable, nominal area of conductor 6 Sqmm, 1100 volts, conforming to IS:694 all as specified and directed.

Three core flat PVC insulated Copper Cable, nominal area of conductor 10 Sqmm, 1100 volts, conforming to IS:694 all as specified and directed.

Foot Valve of size 80mm dia with gun metal working parts, confirming to IS-4038 all as specified and directed.

Foot Valve of size 100mm dia with gun metal working parts, confirming to IS-4038 all as specified and directed.

PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in pillars, posts, foundation bed etc including necessary formwork all as specified and directed.

Supply only calcium hypochlorite granule for water treatment all as specified and directed.

Supply only Alum (Plcalcium hypochlorite granule for water treatment all as specified and directed.

Supply install test and commission LT Panel board, indoor type TPN 415 Volts, 50 Hz, 200 Amps capacity out door cubical type floor mounted factory made double door dust and vermin proof, IP-54, fabricated out of CRCA sheet not less than 2.0 mm thick with 1.5mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50X50X6mm with cable chamber for incoming and outgoing connections comprising for the following including necessary PCC foundation of minimum 0.35m height positioned and fixed with suitable nut, bolts, washers etc to the MC pedestal and connecting all incoming and out going cables all as specified and directed :- (a) INCOMING:- MCCB 4 Pole, 35 KA, 120 Amps 415 Volts - 1 No (b) OUTGOINGS:- (i) Semi automatic star delta starter with 4 pole contactor 3 phase 23-32 Amps with electronic timer suitable for 40HP motor - 2 nos (ii) Semi automatic star delta starter with 4 pole contactor 3 phase 23-32 Amps with electronic timer suitable for 10HP motor - 4 nos (iii) MCCB 4 Pole, 16 KA, 63 Amps 415 Volts - 2 Nos (iv) MCCB 4 Pole, 16 KA, 40 Amps 415 Volts - 1 Nos (v) MCB SPN 40 Amps - 2 Nos (c) 200 Amps aluminium busbar for phase and 150 Amps for neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulators in separate compartment - 01 Set (e) Digital multi function panel meter for measuring voltage, Amps and Frequency with suitable CTs and back up protection - 1 No (f) LED type Indication lamp 240 Volts Set of three - 1 Set

Supply install test and commission LT Panel board, indoor type TPN 415 Volts, 50 Hz, 200 Amps capacity out door cubical type floor mounted factory made double door dust and vermin proof, IP-54, fabricated out of CRCA sheet not less than 2.0 mm thick with 1.5mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50X50X6mm with cable chamber for incoming and outgoing connections comprising for the following including necessary PCC foundation of minimum 0.35m height positioned and fixed with suitable nut, bolts, washers etc to the MC pedestal and connecting all incoming and out going cables all as specified and directed :- (a) INCOMING:- MCCB 4 Pole, 35 KA, 100 Amps 415 Volts - 1 No (b) OUTGOINGS:- (i) Semi automatic star delta starter with 4 pole contactor 3 phase 23-32 Amps with electronic timer suitable for 15HP motor - 2 nos (ii) MCCB 4 Pole, 16 KA, 63 Amps 415 Volts - 1 No (iii) MCCB 4 Pole, 16 KA, 32 Amps 415 Volts - 2 Nos (iv) MCB SPN 40 Amps - 2 Nos (c) 200 Amps aluminium busbar for phase and 150 Amps for neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulators in separate compartment - 01 Set (e) Digital multi function panel meter for measuring voltage, Amps and Frequency with suitable CTs and back up protection - 1 No (f) LED type Indication lamp 240 Volts Set of three - 1 Set

Painting and Repair work to LT panel board at Ava hill pump house all as specified and directed.

Supply and fix leather for foot valve of size 100mm dia all as specified and directed.

Servicing / repairs to DG Set 10 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smooth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on Filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 7.1 Ltr.

Servicing / repairs to DG Set 15 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smooth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 7.1 Ltr.

Servicing / repairs to DG Set 25 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smooth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 6.5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 14.5 Ltr.

Servicing / repairs DG Set 30 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on Filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 6.5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 14.5 Ltr.

Servicing / repairs to DG Set 35 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No. (c) Kirloskar Oil Premium (Engine oil 15W 40) - 08 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 16 Ltr.

Servicing / repairs to DG Set 45 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smooth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 08 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 16 Ltr.

Servicing / repairs DG Set 50 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smooth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 09 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 20 Ltr.

Servicing / repairs to DG Set 63 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smooth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 09 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 20 Ltr.

Servicing / repairs to DG Set 200 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smooth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Fuel Filter element (Pre) - 1 No (b) Spin on Filter Element for lubricating oil - 02 Nos (c) Kirloskar Oil Premium (Engine oil 15W 40) - 16 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 22 Ltr. (e) Air Filter Element - 01 No. Note for Item 109 to 117: Servicing / Repair to DG Set for Item Sl. No. 99 to 107 is to be carried out through authorised service centre of OEM duly approved by accepting officer and test report of the same has to be submitted on completion of work.

Taking down old unserviceable Battery of any size Supply and fix of battery 12 volts 90 AH plates complete all as specified and directed. Make: Exide GENPLUS Type: GP110D31L or equivalent to Amron/ TATA

Taking down old unserviceable Battery of any size Supply and fix of battery 12 volts 180 AH plates complete all as specified and directed. Make: Exide GENPLUS equivalent to Amron/ TATA

Supply and fill Electrolite water for battery use all as specified and directed.

Supply and fill distilled water for Battery use all as specified and directed.

Repairs to Self starter 12 volts duly rewinding and replament all required accessories etc of DG sets capacity from 10 KVA to 63 KVA DG set complete and testing including all as specified and directed.

Repairs to Self starter 24 volts duly rewinding and replament all required accessories etc of DG sets capacity 200 KVA DG set complete and testing including all as specified and directed.

Power contactor 4 pole type MCX-41 in repairs including taking down old unserviceable contactor complete all as specified and directed.

Servicing / repairs and testing of AMF Panel of DG Set 200 KVA by replacement of unserviceable following spares parts including re-doing the cable termination with new lugs all as specified and directed. (i) Over Load Protector - 02 Nos (ii) Single Phase preventor 415 VAC - 01 No (iii) MCCB 400 Amps 36 KA 3 pole - 02 No (iv) MCB rating C-32 SP - 05 Nos. (v) Control Wiring Copper - 01 Job

Servicing / repairs and testing of solar street light panel of any model including removing electrical connection and checking panel battery, replacement of spares etc all as specified and directed.

Supply and replace 12 amps charge control unit 12 volts all as specified and directed.

Supply and replace 12 volts 100 Ah Tubular battery all as specified and directed. Make: Exide/ Amron/ TATA

Supply and replace 22 Watts solar LED fitting with CCU matching with existing make and size all as specified and directed

Servicing / repairs and testing of solar water heater and checking panel and replacement of spares etc. all as specified and directed. Note: (i) Spares will be measured and paid separately. (ii) Spares to be changed shall be of same make as per existing.

Supply and replace Heating Element 3KW as per existing model for solar water heater all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32 × 6mm means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

Alternator (battery charger) 14 volts 35 Amps duly rewinding and replament all required accessories etc of DG sets capacity from 10 KVA to 200 KVA DG set including fixed in repairs complete and testing all as specified and directed

Battery lead copper of 50 sqmm as per sample (Red and Black colour) and taking down old unserviceable battery lead all as specified and directed

Battery terminal positive marking /negetaive marking of brass of existing size and taking down old U/S battery terminal all as specified and directed.

Taking down the deffective sealed compressor from the unit and supply and fix factory reconditioned rotory/ receprocating type compressor 1.5 Ton capacity obtained from the rechange of old compressor including cleaning the refrigeration circuit withappropriate cleaning agents, flushing throught with CO2/N2 removal of complete dirt oil and certain, etc. Pressure testing dehydration, Vacumising, charging R-22/33A gas, testing and commissioning of the 1.5 Ton capacity all as specified and as directed.

Taking out defective condenser fan blade of split type A/C 1.5 Ton capacity and supply and Fix inf new fan blade of same type balancing for smooth rotation in the casing and testing all as specified and directed.

Cleaning/ flushing out the refrigeration system thoroughly with CO2/N2. vaccumising and charging with refrigerant gas and compessor oil testing at workshop and commissioning the system of 1.5 ton capacity split/ Window type AC all as specified and directed.

Supply and fix in replacement inner unit fan motor with runner of suitable capacity for split / Window type AC of cap 1.5 ton all as specified and directed.

Supply and fix in replacement running capacitor 36/45 mfd, 3 pin suitable for split/ Window AC of cap 1.5 ton all as specified and directed. Make- Efcos, Sycap, Keltron

Supply and fix in replacement indoor fan capacitor 1.5 mfd suitable for split/ Window AC of cap 1.5 ton all as specified and directed. Make- Sriram, Reneutrol, CSR 127

Supply and fix in replacement filter suitable for split AC of cap 1.5 ton all as specified and directed. Make- Sriram, Reneutrol, CSR 127

Supply and fix in replacement indoor evaporator unit suitable for split AC of cap 1.5 ton all as specified and directed. Make-Sriram, Reneutrol, CSR 127

Supply and fix in replacement drain out pipe of required size and length of indoor unit suitable for split AC of cap 1.5 ton all as specified and directed. Make-Sriram, Reneutrol, CSR 127)

Taking out the damaged suction line pipe and supply and fixing new copper pipe of size 1/2" in brazing, pressure testing for 1.5 Ton capacity split type AC all as specified and directed.

Supply and charging of refrigerent gas R22/33A in cooling appliances after dehydration all as per standard practice testing for proper cooling effect and satisfactory performance complete all as specified and as directed.

Supply and charging of refrigerent gas R134A/R410A in cooling appliances after dehydration all as per standard practice testing for proper cooling effect and satisfactory performance complete all as specified and as directed.

Supply and fix in replacement PVC insulated and sheathed flexible cable 3 core stranded copper conductore of size 4.0 Sqmm in proper size saddle 1100 volts grade after taking out old unserviceable one including electrice connection complete all as specified and as directed.

Supply, fix in replacement relay 5 pin type suitable for 1.5 Ton capacity all as specified and as directed. Make-Sriram/ Arvind / Annapuma.

Supply, fix in replacement Over load protector suitable for 1.5 Ton capacity all as specified and as directed. Make- Sriram, Arvind/ Annapuma.

Supply, fix in replacement thermostatic switch suitable for window/ split type AC 1.5 Ton capacity all as specified and as directed. Make-Indofoss / Danfoss

Supply, fix in replacement Air conditioner Kit suitable for window / Split type AC 1.5 ton cap having cabinet box, cooling coil, condenser unit all as specified and directed. Make Samsung/ Voltas

Taking down the deffective sealed compressor from the unit and supply and fix factory reconditioned compressor obtained for the exchange of old compressor including deaning the refrigeration circuit with appropriate cleaning agents, flushing throught with CO2/N2 brazing the line . Pressore testing rectification of leakages,dehydration, Vacumising, charging R-134A gas. Replacement of copper pipe, copper strainer, topping up compressore oil incl transportation of the unit to the workshop testing and commissioning of 165 to 220 Ltrs Capacity refrigerator all as specified and directed. Make:- LG , Whirlpool, samsang.

All as per item No.153 hereinbefore but 250 to 350 Ltrs Capacity refrigerator all as specified and directed. Make:- LG , Whirlpool, samsang.

All as per item No.153 hereinbefore but Deep freezer of Capacity 200 to 300 Ltr all as specified and directed. Make:- LG , Whirlpool, samsang.

Gas charging including cleaning the refrigeration system, flushing through with CO2/N2 removal of complete dirt, oil brazing the line, pressure testing, rectification of leakages, dehydrating, vaccumising, charging of R134A gas, replacement of copper pipe, copper strainer, ropping up compressor oil including transportation of the unit to the work shop testing and commisioning the refrigerators of 165 to 220 Ltr Cap all as specified and directed.

All as per item No.156 hereinbefore but refrigerators of 250 to 350 Ltr Cap all as specified and directed. Make:- LG , Whirlpool, samsang.

All as per item No. 156 hereinbefore but Deep Freezer of capacity 200 to 300 Ltr all as specified and directed. Make:- LG , Whirlpool, samsang.

Supply, fix in replacement relay suitable for Refrigerator /deepfrezer of any capacity as per existing modal all as specified and directed. Make :-Sriram, Indfoss, Danfoss

Supply, fix in replacement overload protector suitable for Refrigerator /deepfrezer of any capacity as per existing modal all as specified and directed. Make :-Sriram, Indfoss, Danfoss

Supply, fix in replacement thermostatic switch of auto de-frost suitable for Refrigerator /deepfrezer of any capacity as per existing modal all as specified and directed. Make :-Sriram, Indfoss, Danfoss

Taking down the defective unserviceable evaporator unit and pipe connection and accessories and supply and fixing new set for refrigerator of 165 to 220 Ltr Cap all as specified and directed.

Taking down the defective unserviceable evaporator unit and pipe connection and accessories and supply and fixing new set for refrigerator of 250 to 350 Ltr Cap all as specified and directed.

Taking out unserviceable heating element and supply and fix new heating element 1.5 KW Dual clip type with rubber gasket suitable for geysers up to 25 Ltr capacity all as specified and directed.

Taking out unserviceable heating element and supply and fix new heating element 1.5 KW Round/Triangle type with rubber gasket suitable for geysers up to 25 Ltr capacity all as specified and directed.

Taking out unserviceable heating element and supply and fix new heating element 2 KW Round type with rubber gasket suitable for geysers up to 50 Ltr capacity all as specified and directed.

Taking out unserviceable heating element and supply and fix new heating element 2 KW Triangle type with rubber gasket suitable for geysers up to 50 Ltr capacity all as specified and directed.

Taking out unserviceable thermostat and supply and fix new thermostat suitable for 25 Ltr capacity geyser, range 30° C to 80° C and acting at 70°C all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed.

Hydro Therm Engineers