CWE/KAS-04/2025-26 SPECIAL REPAIR TO BUILDING No AL-07 C COY (OTM) AT DAGSHAI STATION UNDER GE KASAULI

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.6 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.6mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing 0.8mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) and similar work etc with grade of zinc coating 275 fixed as welded or soldered joints complete all as specified and as directed by Engineer-in-Charge.

M&L for mild steel works for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in copings to stone masonary walls of any height, roof kerbs or mud stops, rounded or chamfered on edges, cills, steps, seismic and other similar bands, plinth courses, parapets, bed plates, kerbs slightly rounded or chamfered angles and throating, for fixing MS hold fast, filling gaps/ spaces between wooden/ mild steel member embedded in stone/ brick masonry wall etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling wall or ceiling boards (fibre, pulp insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets, fixed in any position with nails etc complete all as specified and as directed by Engineer-in-Charge.

S&F for 40 mm thick 2nd class hardwood as in floors, plane one side, with butt joints and fixed with nails etc complete all as specified and as directed by Engineer-in-Charge.

M&L for 9 mm thick plywood, 5 No of ply, grade BWP, type BB, fixed with screws over timber frame work or over existing wooden planks flooring including preparation of existing wooden planks flooring surface plane, smooth and free from any overhead nails or screws etc complete all as specified and as directed by Engineer-in-Charge.

M&L for PVC tiles/ sheets 1.50 mm thick, laminated plain, coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors including dismantling of old PVC tiles/ sheets complete all as specified and as directed by Engineer-in-Charge.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

S&F Hard drawn steel wire fabric weight not exceeding 4 kg/ Sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm in dia supplied and fixed in reinforcemnt etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantling 40 sq. cm and over in section in any position in framed work etc complete all as specified and as directed by Engineer-in-Charge.

S&F for 2nd class hard wood over 40 sqcm in Scantling clean sawn timber framed and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 12mm thick semi perforated micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm at all heights of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, contd..

Contd.. suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 5000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws etc complete all as specified and directed. Note : Work shall be done by authorised applicator of the manufacturer.

Taking down cement plaster on brick or stone wall, Ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster complete all as specified and as directed by Engineer-in-Charge.

M&L for 20 mm thick rendering on stone or surface other than fair face of brick-work in CM 1:6 etc finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 20 mm thick rendering on stone or surface other than fair face of brick-work in CM(1:4) surface finished even and smooth without using extra cement with @ 200 ml WPC (liquid type) per bag of cement complete all as specified and directed. Note:-WPC shall be measured and paid separately as supply only.

M&L for 15 mm thick rendering on fair face of brick work in CM 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 sqm but not exceeding 4.0 Sqm each including iron mongries complete all as specified and as directed by Engineer-in-Charge.

Taking down Shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing in same opening after making necessary repair and make the shutter fit for use etc complete all as specified and as directed by Engineer-in-Charge. (Note : Rates are included for filling of cracks or holes with wood filler, wood glue and saw dust or wood plugs for smooth and even surfaces)

M&L 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.

S&F 40 mm thick, factory made Flush shutters, BWP grade, solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge.

Demolition of brick or stone masonry built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6.00 metre mean radius in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

M&L for applying 1.00 mm thick wall care putty on walls etc complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of newly plastered surfaces of walls and applying two coat of oil bound distempering over a coat of Chalk whitening etc complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distempering complete all as specified and as directed by Engineer-in-Charge.

Preparation of old plastered surfaces of wall & applying two coat of cement based paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old plastered wall surfaces of any description not exceeding 10 cm width or girth applying two coat of synthetic enamel paint over a coat of primer when unconnected with other painting or when painted in different tint and make etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium anodized 200 mm long barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium anodized 150 mm long barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 150mm long aluminium anodized handles, febricated type complete all as specified and as directed by Engineer-in-Charge.

S&F 300 mm long sliding door bolt with hasp and staple(bolt type) aluminium alloy, anodised and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

M&L for Sheet glass 4.8 mm thick ordinary quality for windows, ventilators, doors and partitions of any size fixed with oil putty or with aluminium snap beading etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M&L Non skid ceramic coloured tiles 7mm to 8mm thick (squre/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed with cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles 450 X 300 X 7 mm thick, laid in vertical surfaces, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (squares/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed 1:6 complete all as specified and as directed by Engineer-in-Charge.

S&F Powder Coated aluminium frame (thickness or powder coating not less than 50 micron of approved colour) for doors, windows, partitions, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium power coated (thickness or powder coating not less than 50 micron of approved colour) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge.

S&F 9 mm thick pre-laminated particle board, interior grade, both side lamination of approved colour and pattern, fixed to wooden/ aluminium frame work as in door/ cupboard shutters etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 18/19 mm Pre-laminated partical boards, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails complete all as specified and as directed by Engineer-in-Charge.

M&L for 75 mm thick PCC 1:3:6, type C-1 (using 20 mm graded stone aggregates) as in plinth protection, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 15 mm bore complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 20 mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore GI tubing, 'medium grade', with all fittings to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore GI tubing, 'medium grade', with all fittings to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75 mm dia PVC (SWR) floor trap, with grating including jointing with solvent cement etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 110 mm dia PVC (SWR) 'P' trap including jointing with solvent cement etc complete all as specified and as directed by Engineer-in-Charge.

S&F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors, including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning complete all as specified and directed by Engineer-in-charge.

S&F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls complete including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning complete all as specified and directed by Engineer-in-charge.

S&F 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints laid in trenches or in floors, including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning complete all as specified and directed by Engineer-in-charge.

S&F 110 mm PVC (SWR) bends with access door, any radius complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) vent cowl 110 mm dia bore complete all as specified and as directed by Engineer-in-Charge.

S&F 75 mm PVC (SWR) bends, any radius complete all as specified and directed by Engineer-in-charge.

S&F in repair stop valve, 15 mm bore, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair stop valve, 20 mm bore, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type, screwed down for iron pipe or for brass ferrule etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash hand basin, white with pedastal, flat back, size 550 mm x 400 mm including brackets etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs for 15 mm bore brass Chromium plated wall/ basin/ sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts complete including making good to floor to match with adjoining surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC valveless syphonic action type flushing cistern, 10 litre capacity, low level, white, with inlet ball valve, float and handle including brackets fixed complete including PVC flushing pipe 32 mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F Urinal spreader, PTMT, of any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for PVC connection, 15 mm bore of length 450 mm with PTMT nuts complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for Towel rail, 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 190 gms) etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling water tanks of capacty exceeding 250 litres & not exceeding 500 Litres and removing to store etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks, ISI marked (Cylindrical vertical with closed top) tripple layered, screwable lid, hoisted and fixed in position, including supply and fix tank nipple all as specified in SSR Part-I complete all as specified and directed by Engineer-in-charge.

S&F ball (float) valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gm) 20 mm bore etc complete all as specified and directed by Engineer-in-charge.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 12 cm wide with chromium plated bracket guard and railing 60 cm long etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Soap dish, vitreous china, white, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches in hard/ dense soil, not exceeding 1.5 metre wide and not exceeding 1.50 metre deep and getting out complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in and including spreading, levelling and well ramming not exceeding 25 cm thick in hard and dense soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated materials not exceeding 50 metre and depositing where diretected at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete etc complete all as specified and as directed by Engineer-in-Charge.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in foundation, filling and mass concrete etc complete all as specified and as directed by Engineer-in-Charge.

M&L for precast RCC 1:2:4, type B-1 (using 20 mm graded mechanically crushed stone aggregates) as in landing, cover slab for manholes, septic tank set in cement mortor (1:4) including necessary form work complete all as specified and as directed by Engineer-in-Charge. (Note: Reinforcement shall be measured separately)

Mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5 mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and as directed by Engineer-in-Charge.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested; for 150 mm Bore of pipe complete all as specified and as directed by Engineer-in-Charge.

M&L for salt glazed stone ware drain pipe laid in trenches and jointed all as specified (internal dia of pipe 150 mm bore pipe) complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing off the rubbish materials etc complete all as specified and as directed by Engineer-in-Charge.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear mere including drilling and plugging holes etc in apron complete all as specified and as directed by Engineer-in-Charge.

M&L for Post Constructional Antitermite Treatment at points of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed by Engineer-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 0.9 mm thick decorative laminates type I, or surface finish, colour and pattern as approved with adhesive etc complete all as specified and directed.

S&F stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed

S&F in repair stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed.

S&F stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

S&F in repairs stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

S&F stainless steel 150 mm long handles and fixed with stainless steel screws complete all as specified and as directed.

S&F in repairs stainless steel 150mm long handles and fixed with stainless steel screws complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of any description not exceeding 1.5 Sqm each including iron mongries complete all as specified and as directed.

S&F 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed.

M&L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted except stone, built in cement mortar (1:4) etc complete all as specified and directed.

S&F mild steel 375 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

M&L for PVC edge strip of 18/19 mm wide, colour and pattern as approved, fixed with adhesive complete all as specified and as directed by Engineer-in-Charge.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised bright finish width of flaps (when open) 30 mm complete all as specified and as directed by Engineer-in-Charge.

S&F stainless steel hasp & staple, 100 mm inluding bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass, gauge etc., divided into squares with plain, chamfered or rounded, mitred beads for securing glass, etc., for windows, ventilators etc. are provided with stiles and rails as specified in SSR Part-I, section 8 clause 8.24(b) or to match with existing shutters etc supplied and fitted to chowkats etc complete all as specified and as directed.

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or nails complete all as specified and as directed byEngineer-in-Charge.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power socket) including complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed by Engineer-in-Charge.

Material and labour for point wiring with approved colour coded multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including concealed PVC conduit terminated on and including new modular sunken box of suitable size of frame, cover for mounting switches, socket and regulator fixed on surface flush with wall, complete all as specified and directed for the following :- Note: Quoted rate shall be inclusive of cutting chases in wall/ floor/ PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.

One Light/ Fan point controlled by one, one way switch 6 Amp complete all as specified and as directed by Engineer-in-Charge.

One switch socket outlet 3 pin, 5 Amp on the independent board complete all as specified and as directed by Engineer-in-Charge.

One switch socket outlet 3 pin, 5 Amp on same board complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 116.00 here-in-before but with 4.00 Sqmm nominal cross sectional area copper conductor cable connected to common earth and earth dolly with all accessories one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking into credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white/ colour washing/ distempering etc to match the existing complete all as specified and directed by Engineer-in-Charge.

M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 6.00 sqmm, LT, 1100V grade, drawn through with and including PVC conduit of appropriate dia with all fittings and accessories, concealed in walls and one run of 6.00 sqmm single core multi stranded copper conductor cable as earth continuity conductor with accessories and fittings and connecting to existing main switch board/ DB and testing on completion including and making good to disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L of Sub main wiring with two runs of single core PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 10.00 sqmm, LT, 1100V grade, drawn through with and including PVC conduit of appropriate dia with all fittings and accessories, concealed in walls and one run of 10.00 sqmm single core multi stranded copper conductor cable as earth continuity conductor with accessories and fittings and connecting to existing main switch board/ DB and testing on completion including and making good to disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

Note for serial item no 118.00 & 119.00 1. Two runs of cable, one run of earth wire and one run of PVC conduit shall be measured as one run length. 2. Cable required for connection to DBs shall deemed to be included in the quoted rates and shall not be measured separately. 3. Earth wire shall run inside the conduit pipe.

S&F Modular switch, 1 way, 6 Amp,1 module complete all as specified and as directed by Engineer-in-Charge.

S&F Modular Socket, 6 Amp - 2/3 pin, 2 module complete all as specified and as directed by Engineer-in-Charge.

S&F Modular switch, 1 way, 16 Amp,1 module complete all as specified and as directed by Engineer-in-Charge.

S&F Modular Socket, 6/ 16 Amp - 2/3 pin, 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fix ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals complete all as specified and as directed by Engineer-in-Charge.

S&F Lamp holder, PVC insulated body, with back plate suitable for batten fitting complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing in repair SLIM LED batten with polycarbonate housing and diffuser with elegantly desinged end caps 1 x 20W, 220 V, AC connecting up with three core flexible of suitable size from ceiling rose complete all as specified and as directed by engineer-in-charge.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser, 2 feet, 10 watt, 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by engineer-in-charge.

S&F in repair LED light fitting 1 x 9W/ 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.

S&F in repair self ballasted LED Retrofit Bulb, 5 Star, 12 Watt with PBT body shell and PC diffuser 210 degree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED street light fitting 35 Watt, 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and as directed by Engineer-in-charge.

Taking down carefully unsv distribution board of any capacity including wooden board and making good the disturbed surfaces of walls to match the existing surface including two coats of white/ colour washing/ distempering etc to match the existing complete all as directed by Engineer-in-Charge.

S&F Distribution Board (DB), TPN, 4 way, vertical loadline type, double door, IP 42, CRCA sheet powder coated vertical type, factory made suitable for incorporating MCB as out going and MCCB as incomming including connecting incomming and outgoing cables & blanking plate as required including taking down existing unsv DB of any size and making good distrubed surface to match with existing complete all as directed by Engineer-in-Charge.

S&F Distribution Board (DB), SPN, 8 way, double door, IP 42, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incomming and outgoing cables & blaking plate as required including taking down existing unsv DB of any size and making good distrubed surface to match with existing complete all as directed by Engineer-in-Charge.

S&F in replacement of MCCB, 4 Pole, 100 Amps, 27 kA, 415 Volt with adjustable thermal and fixed magnetic, over load setting upto 70% complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement MCB 'C' series, SPN, 40 Amp, (in accordance with IS/IEC 60898-1) 240 V, 50 Hz, 10 kA with ON/OFF indication flag, SPN, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement MCB 'C' series, SP, 6 Amp to 32 Amp, (In accordance with IS/IEC 60898-1) 240 V, 50 Hz, 10 kA with ON/OFF indication flag, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of Heating Element ISI Marked round/ tringular base, push type or thread type including rubber washer for 1.5/2.0 KW suitable for geysers of 25 Litres to 50 Litres capacity (as per existing make of gyser) complete all as specified and as directed by Engineer-in-Charge.

S&F thermostat ISI Marked suitable for geysers 25/50 Litres capacity (as per existing make of gyser) complete all as specified and as directed by Engineer-in-Charge.

S&F Chromium plated connections 450 mm long for Hot/ Cold water of 15 mm size with chromium nuts and washers fixed as in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed by Engineer-in-charge.

Taking down the geyser of 25/ 50 ltr capacities from the site after disconnecting the water connection, electric connection, opening the geyser assembly and de-scaling the deposited impurities in the inner container and outlet water pipe set and refix on the wall with fastener of 4 nos each complete all as directed by Engineer-in-Charge. (Note:- All minor items required for replacement Such as bolts, rubber seal, ring nuts, washers shall be included in the quoted rate itself).

M&L for new earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board/ Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B-1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit/ chamber in PCC 1:3:6 type C-1, for pit cover including testing on completion including taking down of old unsv earthing any type complete all as specified and directed.

Note: The quoted unit rate shall be including of protection pipe and GI wire from top to earth plate up to 7.5 meters.

Durga Construction (BID ID -3423541)

Babu Ram Sud and Sons (BID ID -3429798)

NARINDER KUMAR SONS (BID ID -3418356)

R B TRADERS (BID ID -3423216)