GE/WS/Token No-17 OF 2025-26

Amount

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for laying of CI pipes/GI pipes and getting out in hard /dense soil incl. , trimming the sides and forming bottom surfaces to required level complete all as specified and directed by Engineer-in-Charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed.

Supply & Laying of 50 mm GI pipe "medium grade" ISI mark including all fittings in trenches/wall/floor complete and making good the distributed surfaces as per existing, complete all as specified and directed (Note:- Excavation and earth work will be measured and paid separately).

S&F Gun metal gate valve 50 mm with iron wheel head screwed both iron iron pipe ISI Marked as per IS 778 ,complete all as specified and directed.

Supplying, laying, jointing, welding and testing 80 mm MS Pipe (Heavy class 'C') IS : 1239/3589, 8mm thick laid in trenches or in Horizontal/Vertical/inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line,including flanges, complete all as specified and directed :- (Note:- (i) Cost of MS Flanges incl fabrication work will be deemed to be included in unit rate quoted by contractor. (ii) Excavation and earth work will be measured and paid separately.

M&L including jointing and testing of cast iron sluice valves 80 mm class PN-1.0, conforming to IS:14846 flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and rubber gaskets, complete all as specified and directed

M&L for making connections in existing MS pipe header 300 mm dia size including provision of one out going connection of 80 mm with flanged ends and making suitable reducer section for connection with water meter, and strainer including painting with two coats of synthetic enamel paint over a coat of red oxide prime, complete all as specified and directed. Note:- (i) Strainer and water meter will be measured and paid separately.

Supply, installation and testing of 80 mm flanged ends strainer/dirt box rating (PN 1.0) with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/ vertical position ,complete all as directed at site by the Engr-in-Charge. Note :- (i) Flange joints including jointing materials shall deemed to be included in the unit rate of this item.

Supply, installation and testing of 80 mm dia flanged ends Water Meter woltman type, including testing and making good connection with flanged ends, with gasket rubber sheet and nut & bolts etc ISI Marked fixing in horizontal/incline/vertical position, complete all as specified and as directed at site by the Engineer-in-Charge. (Note:- (i) Flanged Joints Including Jointing material shall deemed to be included in the unit rate of this item.

Excavation in trenches by cutting of road crossing, PCC hard standing for laying of pipe lines including filling of PCC (1:2:4) type B-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete including making good the existing surface complete all as specified and as directed. (Note:- Length and depth of cutting will be decided by Eng-in-Charge as per site requirement. Contractor will provide all materials for making good as per existing road and removed rubbish out size MD land at his own arrangement. Cost deemed included in quoted unit rate.)

SALUJA CONSTRUCTION CO (BID ID -3344599)

Yadav Enterprises (BID ID -3335838)

Deven Associates (BID ID -3334266)