REPIAR TO ROAD INCLUDING ROAD FURNITURE IN MD ACCN AREA UNDER AGE BR II OF GE SOURTH PATIALA

Material and labour for preparing existing black top surface by brushing with wire brushed for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc from black top surface , Applying evenly a premix /tack coat with bitumen grade VG-10 @ 5.0 Kg per ten Sqm complete all as specified and as directed.

Material and labour for applying evenly a priming /tack coat with bitumen grade VG-10 @ 5.0 Kg per ten Sqm over premix bitumous macadam surface complete all as specified and as directed.

Material and labour for providing and laying Premix Bituminous asphaltic dense concrete 30mm consolidated thickness with 5.5% binder ( using paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2, mixing of agrgregates with VG-30 bitumen in electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work site by tippers and laying with hyrdostatic paver finisher and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and as specified and as directed.

NOTES : (i). The contractor shall quotes the rate against Item considering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause. No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out from Thapar Insti. of Engg & Tech. Patiala/ NIT Kurukshetra/ PEC Changigarh/ CTL for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the accepting officer for approval. Any variation in binder content on minus side shall be adjusted @ Rs 50/kg of binder and no adjustment shall be made on plus side. (ii). Cost of filler i.e. cement (Ordinary portland cement/OPC) is deemed to be included in quoted unit rate. (iii). After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate. (iv). The vintage of the T&P (Hot mix plant/road roller i.e. vidrating roller,static roller,hydraulic roller/paver) to be incorporated in the wk should not be more than 10 years except the tippers and shall be approved by GE before date of commencement of the work. (v). The certificate wrt the capactiy of the hot mix plant (HMP) shall be 100-120 TPH and the plant shall be electronic operated, batch type and location be intimlated and the same shall be approved by GE before date of commencement of the work. (vi). The distance of the HMP shall not be more than 100 KM from the Mil Stn Patiala. Detail of plant to be submitted to GE for approval before date of commencement of the work. (vii). The calibration certificate for HMP shall be submittaed by the contractor for approval of GE before date of commencement of the work which should not be more than 06 months old. (viii). The minimum 2 Road roller each (vibrating and static road roller) are required at site before commencement of the work on the groung and the same shall be approved by GE before date of commencement of the work.

Material and labour for repairs to pot holes any depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scouring sunken surfacesin roads, path etc cutting edges at least 25 mm depth and making good by applying tack coat with bitumen @ 5 kg/X Sqm, putting in premix bituminous macadam using paving bitumen of grade VG-30 well rammed and sealed with binder @ 9.80 kg mixed with 0.09 cum of stone chippings 6.3 mm size per 10 Sqm and again well rammed including supply of premixed macadam, binder and chipings, depth of pot holes exe 30mm thick, complete all as specified and as directed.

Material and labour for 2.00mm thick road marking thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfaces complete all as specified and as directed. Make : Reliance /Asian /Shalimar

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions comlete all as specified and as directed.

Material and labour for preparation of un-surfaced of Water Bound Macadam (WBM) surfaces by sweeping, cleaning by power broomers or mechanical sweepers or by brushing with wire brushes for removing caked mud etc removing completely all loose materials and other foreign materials and finally fanning the cleaned surface with air compressors to remove all loose dirt etc and applying a priming/tack coat of paving bitumen of grade VG-10 @ 10 Kg per 10 Sqm for premix dence concrete using mechanical sprayer complete all as specified all as specified and as directed .

Material and labour for laying chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed / bedding layer in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete type C-2, (1:3:6) using 40mm graded stone aggregate as in sub floors,sub bases,floors and paving etc complete all as specified and as directed.

Material and labour for preparing new concrete surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coats of primer complete all as specified and as directed.

Material and labour for preparing old concrete surfaces of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.