Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹44.7 L+₹2.1 L (4.83%)Rejected-Finance | L2 | Rejected-Finance Not being lowest |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
18 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok Sikkim 737102
Provn of ration stores toilet blocks and bathrooms at lower and upper swastik area under GE Gangtok
2022_MES_501253_6
8001AE8
Open Tender
Miscellaneous Works
Item Rate
182 days
Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹77,600
Yes
27 May 2022
10 May 2022
20 May 2022
10 May 2022
18 May 2022
13 May 2022
Amount
B/R PORTION Surface dressing n exc 15cm deep and getting out in soft /loose soil etc complete all as specified and as directed.
Rough excavation not exc. 1.5 metre in depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting in soft/loose soi complete all as specified and as directed.
Excavation over areas not exc 1.5 in depth and getting out soft/loose soil complete all as specified and as directed.
Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including brought upto course complete all as specified and as directed.
M&L formwork to sides of concrete foundation ,plinth beams for rough finished surfaces of concrete etc complete all as specified and as directed.
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M & L for formwork to sides and soffits for rough finished of floors or roof beams, lintels cantilevers, shelves including supports etc complete all as specified and as directed
M & L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in beams, cantilevers, lintel over 1.5 m span complete all as specified and as directed
M & L for Formwork to sides of pillars, posts, struts, piers,columns, and stanchions for rough finished surfaces of concrete complete all as specified and as directed
M & L RCC (Nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed
M & L RCC (Nominal mix) type B1, 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in shelves, floors, roofs, landings, balconies, canopies, deck slabs and the like complee all as specified and as directed.
M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for labour for Mild steel TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soft/loose soils complete all as specified and as directed by the Engr-in-Charge.
Removing excavated materials(soil) to distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point.
Material and labour for 75mm thick sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.
Materials and labour for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub-base of floor etc. complete all as specified and as directed by the Engr-in-Charge.
M &L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed with CM 1:6 complete all as specified and as directed.
Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
M&L for autoclave cellular (aerated) concrete block masonry, the size of autoclaved cellular (aerated) concrete block use as specified as per site requirement having compressive strength not less than 5.00 N/Sqm (5.00 Kg/Sqcm) conforming to IS : 2185 (Part-3)-1984, setting in CM (1:6) complete all as specified and as directed. Note :- (i) Sampling and testing of AAC concrete blocks shall be carried out in accordance with IS specification. (ii) Manufacturer certificate to be produced that masonry units conform to the requirements of this specification and IS : 2185 (Part-3). (iii) Contractor should produce independent tests certificate of AAC Block from manufacturer before or immediately after delivery.
Material & labour for rendering 15mm thick on block/brick or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified.
M&L for rendering 20mm thick in cement mortar (1:4) in two layer of 10mm thick each with using WPC shall be mixed with cement mortar in finishing outer layer only as per manufacturer's instruction, on other than fair face of brick/stone masonry (external surfaces) finished surface fair and even without using extra cement complete all as specified and as directed. Note : (WPC shall be measured and paid separately as supply only)
Supply only integral Water Proofing Compound, conforming to IS-2465-2003 of approved make complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash on new surfaces of walls all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of suitable primer on new surfaces of walls all as specified and directed.
S&F mild steel bands, straps, supports or stays for rainwater, ventiliating pipes incl bolts, hooks for large gates, pintle hinges, large hasp and staples, chains, handmade sliding bolts, clamps, hold fast, and wall tie, hook for hanging fans, plain angle cleats for securing purlins trusses or rafters, knee piece inserts, two way and three way straps, plate washers and all similar small articles conforming to FE-290 Gde and E-165 all as directed and specified by Engr-in-Charge.
S&F mild steel tubular trusses including special shaped washer etc. Complete using ERW or induction butt wekded tubes conforming to IS-1161-1998 grade St-240 including one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication and fixing complete all as specified and as directed.
Supply & fix mild steel Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe410-W (gde-E-250) including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractors workshop before fabrication complete all as specifed and as directed.
M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.
S&F galvanized steel pull type rolling shutters of laths thickness 1.00 mm, without ball bearing as specified including top cover, anchrong rod, hasp and staple and errected in position as indicated, complete; gear operated type with bevel gear box and crank handle etc complete all as specified and as directed.
Supply and fix steel windows or ventilators fixed type, with glazing bars complete all as specified and as directed.
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde-E- 250) complete all as specified and directed by the Engr-in-Charge.
S&F 4mm thick PVC acrylic sheet, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane.
Refixing including taking down shutter of area exceeding 1.0 Sqm and n.exc 2.0 Sqm each in the same opening etc complete all as specified and as directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed by the Engr-in-Charge
Material and labour for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and as directed.
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form, moulds, mitrred/stopped ends complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate ) as in plinth protection; path / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for lacquer coated chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of in CM 1:6 all as specified.
Material and labour for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses etc vertical or to better in rough finished surfaces complete all as specified and as directed.
Supply only boulders exceeding 20cm and upto 30cm dia (Basalt, trap or any other approved) of size 200 to 300mm complete all as specified and as directed.
M&L for plain cement concrete 1:3:6, type C-2 as in Plum concrete in retaining walls etc including plums of stone boulders (Basalt, trap or any other approved) of size 200 to 300mm complete all as specified and as directed. Note : Boulders shall be measured separately.
M&L for hand packing using broken stone or boulders (any thickness) at back or block masonry retaining wall and raising or lowering to the required level complete all as specified and as directed. (Note : Boulders shall be measured separately).
Suply and fix 4mm thick Non asbestos fibre cement building boards (E- board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion distemper over a coat of primer including preparation of surfaces complete all as per manufacturers instructions specifed and directed by the Engr-in -Charge.
S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partitions of 600mm x 600mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 23mm x 28mm x 0.30mm thick, cross tee shall be 23mm x 28mm x 0.30mm thick and wall angle shall be 20mm x 20mm x 0.30mm thick complete all as specified and as directed.
M&L for 2nd class hard wood as in timber scantling, clean sawn and fixed unframed work etc complete all as specified and as directed.
M&L for hardcore of guage n.exc 0.63mm broken stone or boulders deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified & as directed.
S&F Galvanised 0.63mm thick Plain mild steel sheeting in ridges, hips, valley gutter drip and straight flashing (length and grith as fixed) with grade of zinc coating 275 with two corrugation side lap as in roof fixed with 'J' or 'L' bolts all as specified.
S&F 110mm bore PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolts, bends, Tee bend of any radius for PVC(SWR) pipes/steel gutters etc fixed to walls complete all as specified and as directed.
S&F 110mm bore PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to wall with necessary clamps, bolts, bends, Tee bend of any radius for PVC(SWR) pipes/steel gutters etc fixed to walls complete all as specified and as directed.
Supply and fix 110mm bore PVC(SWR) bend of any radius for PVC (SWR) pipes/steel gutters etc, fixed to walls complete all as specified and as directed.
Supply and fix 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as directed .
S&F 75mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to wall including necessary earthwork, fixed on walls complete all as specified and as directed.
S&F 75mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors including necessary earthwork, fixed on walls complete all as specified and as directed.
Supply and fix 75 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes/ Steel Gutters etc , fixed to walls complete all as directed.
Supply and fix 75 mm bore PVC (SWR) junction Single, (Single T) equal or unequal with acess door complete all as directed .
S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
M&L PCC 1:2:4 type B0(using 12.5 mm graded stone aggregate) as in coping including weathering slightly rounded or chamfered angles and trotting complete all as specified and as directed.
M&L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed.
M&L for 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n.exc 22.5 cm long complete all as specified and as directed.
S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafter and running rails and guides for sliding doors fixed with angle clear or other connecting plates conforing to Fe-410-W(Gde-E-250 quality-A)including one coat of red oxide zinc chrome primer after preparation of surfaces at contractor''s workshop before fabrication complete all as specified and as directed.
Material & labour for non skid coloured ceramic tiles of 7 to 8 mm thick (Square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed / bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed..
Materials & labour for coloured glazed ceramic tiles of size (300 mm x 200 mm / 350 mm x 250 mm / 450mm x 350mm ) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
S&F of factory made solid PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing complete all as specified & directed.
S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for top rail and bottom rail, paneling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing Complete all as specified and directed.
S&F for steel ventilators with top hung shutter incl hinges, steel peg stay along with 4mm thick figured glass strips, pin head type and glazing with oil putty in squares n.exc 0.50 Sqm in each pane etc complete all as specified and as directed.
S&F 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified.
S&F 200mm long aluminum anodised tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150 mm long aluminium anodised handles, cast type, complete all as specified and directed
S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or exruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
Supply and fix galvanised steel water tubing 15mm bore medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as directed.
Supply and fix in repair Vitreous China squatting pan of ‘Orissa pattern’, of size 580 mm x 440mm (white) with integral foot rest‘P’ or ‘S’ trap, front or back inlet, any pattern (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. Make Cera Cat No. COVY S3010104 or equivalent of approved make.
Supply and fixing white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 570 x 460 x 380 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed. Make Cera Cat No. S1050106 S Trap Cat no.B1510120 Ceraanglo deluxe seat cover or equivalent of approved make.
Supply and fix 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as specified. Make : Cera Cat No. B1010101 or equivalent of approved make.
Supply and fix vitreous china, white colour, flat back, wash hand basin of size 55 x 40 x 79cm fixed with brackets , including providing 32 mm dia PVC waste pipe , 32 mm bore CP waste coupling and making all necessary connections complete as directed. Make : Cera Model CORNET Cat No 1008 or equivalent of approved make.
Supply and fix vitreous China (white) half stall type urinal of size 420x395x635mm, including CP urinal spreader, 15mm bore PVC connector pipe providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing granting and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed. make : Cera or equivalent approved make.
Supply & fix Bib tap , long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one. Make : JAQUAR Code : CON-107 KN or equivalent of approved make.
Supply & fix 15 mm bore dia angular Stop cocks,chromium plated, with wall flange screwed down, screwed fro iron pipe or union and complete all as directed. Make : JAQUAR Code- CON 059 KN or equivalent of approved make.
Supply and fixed 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for GI pipe complete all as specified and as directed. Make : JAQUAR Code CON-CHR-021 KN or equivalent of approved make.
Supply and fix Brass chromium plated shower rose 120mm size complete all as specified and directed by Engr-in-Charge.Make- Jaquar Cat No OHS-1789or equivalent of approved make.
Supply & fix chromium plated health faucet 8 mm dia alongwith 1m flexible tube and wall hook fixed in position complete all as directed.Make : Cera F8030103 or equivalent of approved make.
S&F 15mm bore Brass CP mixer for mixing holt & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make : ESSCO Cat Part No. MQT 516KN or equivalent approved make.
Supply and fix PVC connections 15mm size with PTMT/Brass nuts of length 600mm complete all as directed by the Engr-in-Charge. Make Prayag or equivalent make approved.
Supply and fix CP tubular towel rail 600 mm long with and including chromium plated brass screws complete all as specified& as directed. Make: Jaquar 'Continental Series' Cat No 1111 or equivalent of approved make.
S&F stainless steel soap dish best quality fixed to plugs with chromum plated brass complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2(using 40mm graded stone aggregate) as in bed to drain pies 100mm bore, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.
Cutting into existing manholes for connecting new drains internal dia 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) smooth finished, and reforming benching as required complete all as specified and as directed.
M&L for 18-20mm thick Granite slab green in one piece machine cut , as in steps , jambs, pillars, window cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing including rounding to edges of stone slabs such as in steps , cooking platforms, and other similar situations over and including 20mm thick bedding / backing layer in cement mortar (1:6) complete all as directed.
E/M PORTION M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3 mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and directed.
All as per sl item No. 95 above but with 1.5 Sqmm copper conductor with 1.5 Sqmm earth stranded wire for 5 Amps power point in independent board.
All as per sl item No. 95 above but with 2.5 Sqmm copper conductor with 2.5 Sqmm earth stranded wire for 16 Amps power point in independent board.
S&F decorative LED tube light fitting 1x18 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed. Make : Anchor Product Code No 39527 or equivalent of approved make
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz,RPM 1200, Copper winding of sweep 380mm complete all as specified and as directed.
S&F in repairs switch piano flush button,single pole, two way, 6 amps complete all as specified and as directed. Make : Anchor Product Code No 50064 or equivalent of approved make
S&F in repairs switch socket combination modular type, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete complete all as directed including taking down old one. Make : Crabtree, Legrand and L&T or equivalent of approved make
S&F in repairs switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete complete all as directed including taking down old one. Make : Anchor Cat No 38808/50665 or equivalent of approved make
S&F in repair ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed Make : Anchor Product Code No 39040 or equivalent of approved make
S&F in repair sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete and including taking down old DB with MCB complete all as specified and as directed.vells/ABB/Legrand) (Make : L&T cat No DBSPN008DD or equivalent of approved make)
S&F sheet metal enclosure triple pole and neutral DB's 415 volts, IP-43, suitable for mounting MCB's, SPN, 8 way with rated copper bus bar double door type complete and as directed. Havells/ABB/Legrand.
S&F and test, in replacement of LED street light fitting of capacity 35 Watts, IP-65/66 protection including electronic driver (SMPS baed constant current supply with lower THD,output open/short circuit protection, phase to phase protection, over voltage protection, surge voltage protection etc) unit suitable for working voltage 140-230 V AC, 50 Hz, lamp bracket with impact and corrosion resistant and connecting up complete including taking down old unserviceable one all as specified and directed. Make : Havells, Cat No. ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent in Phillips/Jaquar.
Supply and fix in replacement of bracket suitable for street light, made out of 40 mm dia 1.5 mtr length GI pipe light grade bent to shape fixed with suitable size of clamps (2 Nos), bolts, nuts and washers incl painting with one primer coat and two coats of aluminium paint complete including taking down old unserviceable one and all as specified and directed.
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB10060C to BB10320C or equivalent of approved make)
S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB20400C to BB20630C or equivalent of approved make)
Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia MS bars etc complete all as specified and as directed including testing on completion.
Supply, Laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables conforming to IS 7098(Part-I)-1988, heavy duty with aluminium stranded conductor laid in trenches or passing through pipe of cross sectional area 25 sqmm 2core with all fixing & connecting accessories complete all as specified & as directed. Note:- (i) Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this schedule. (ii) The rate quoted by the bidder shall deemed to be inclusive of the cost of aluminium thimbles/lugs glands, terminal of suitable sizes."
S&F only of Decorative LED tube 2 feet light fitting 1x10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz,RPM 1200, Copper winding of sweep 150mm complete all as specified and as directed. Havells Cat -Ventil Air-DS
M&L for submain wiring alongwith earth wire of size 2x6.0 Sqmm + 1x6 Sqmm earth wire ISI marked FRLS PVC insulated multi stranded copper conductor single core cable drawn in and incl PVC casing and caping of adequate size with all accessories as required as specified and as directed incl taking down old unserviceable submain wiring. (Note : Three runs of PVC wire with one run of PVC casing and caping will be measured and paid as one length.)
S&F in repairs MCB, Triple pole & neutral, 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed (Make : L&T cat No BB40630C or equivalent of approved make)
Supply, Laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables conforming to IS 7098(Part-I)-1988, heavy duty with aluminium stranded conductor laid in trenches or passing through pipe of cross sectional area 35 sqmm 3.5 core with all fixing & connecting accessories complete all as specified & as directed. Note:- (i) Earthwork & Excavation, GI pipe brick protection etc shall be measured and paid separately under relevant items of this schedule. (ii) The rate quoted by the bidder shall deemed to be inclusive of the cost of aluminium thimbles/lugs glands, terminal of suitable sizes."
S&F electrical water heater storage with copper inner tank and heating element, capacity 25 Ltr BEE-5 Star rated complete with all accessories such as safety valve thermostate, NRV, connection piece etc. Make : Havells, Cat -Monza DX GHWBMGSWH0550 or equivalent approved.
Supply & fix in replacement Rotational moulded polyethylene water storage tank, 1000 litres capacity, ISI marked multi layer constriction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 25mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and as directed
Supply and fix galvanised steel water tubing 25mm bore medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as directed.
S & F 25mm bore gun metal gate valves , ISI marked with iron wheel head ,screwed both ends for iron pipe and fixed complete all as directed and specified
S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and as directed.
Supply & fix stop connection 15mm size with PTMT nuts of length 750 mm complete all as specified and as directed.
Screwing 25mm bore in existing steel tubing for alteration or additions (or lengthening screw on pipe to forming connections) complete all as specified and as directed.
S&F water pump 1 HP, head upto 30 meter, 2200 LPH, Single phase 230 V, self priming fixing with suitable accessories. Make : Crompton SP Mini Champ or equivalent approved.
M/S ANIL KUMAR THAKUR
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .