Pkg 01 Fixation of Rates for different items of the PWSS to be executed under JJM Assam

Amount

1) Installation, testing and commissioning of DTW at various PWSS under different divisions of the state i) Rotary Drill/Reverse Rotary Drill : Providing installation and commissioning of 150 mm dia deep tube well by Rotary Rig within the jurisdiction of different phe divisions including preparation of site for placing of drilling rig, transportation of rig and ancillary equipments and drilling the DTW including extraction of drill pipes etc, lowering fitting fixing 150mm diameter UPVC pipe assembly comprising of strainer, pipes and cone in potable water bearing strata, washing the bore well etc. , supplying necessary jointing materials, developing the DTW with air compressor Make- Kirloskar / Cumins for a period of 24 hours and supplying and packing pea gravel of size 1/8" to 3/8" around the periphery of casing including screening washing etc. all complete to the satisfaction of the deptt.

ii) DTH : Providing installation and commissioning of 150 mm dia deep tube well by Rotary Rig within the jurisdiction of different phe divisions including preparation of site for placing of drilling rig, transportation of rig and ancillary equipments and drilling with drill bit in overburden portion of soil formation and collection of soil sample every 3 meters depth and using DTH hammer in all kinds of rock foundation and finishing the bore hole minimum 150mm diameter upto bottom and lowering the M.S. Casing pipe of overburden portion including supplying pipes and all jointing materials, developing DTH for desired discharge ( minimum 8000 lph ) all complete as directed by the department. For mobilisation of Rig at site,transportation of P.O.L & all drilling equipment and acessories including development of the well

iii) Drilling in overburden portion, including cost of casing pipe etc. and lowering all complete.

iv) Drilling in rocky strata using DTH hammer

2) Supplying, fitting, fixing, testing and commissioning of RWPM of different diameters at various PWSS under different divisions of the state Supplying, laying , fitting & fixing GI (Medium Class) Pipe conforming to IS-1239 (pt-I) 2004 (Ammended 2010) including GI specials and jointing material, cutting of pipe materials and necessary earthwork in trenching and refilling of earth and restore to its original condition including dressing, dewatering incuding bailing out water where necessary all complete and also necessary testings and commissioning as per direction of the department. i) 150 mm dia GI

ii) 125 mm dia GI

iii) 100 mm dia GI

iv) 80 mm dia GI

v) 65 mm dia GI

vi) 50 mm dia GI

Supplying, laying , fitting & fixing UPVC pipes ( 6 kg/cm2 ) conforming to IS 13592 (1992)including specials and jointing material such as cement lubricant, cutting of pipe materials, providing joints to pipes and specials with jointing material after roughening the surface and necessary earthwork in trenching and refilling of earth and restore to its original condition including dressing, dewatering incuding bailing out water where necessary all complete and also necessary testings and commissioning as per direction of the department. i) 160 mm dia UPVC

ii) 140 mm dia UPVC

iii) 110 mm dia UPVC

iv) 90 mm dia UPVC

v) 75 mm dia UPVC

vi) 63 mm dia UPVC

3) Supplying, fitting, fixing, testing and commissioning of CWPM of different diameter at various PWSS under different divisions of the state Supplying, laying , fitting & fixing GI (Medium Class) Pipe conforming to IS-1239 (pt-I) 2004 (Ammended 2010) including GI specials and jointing material, cutting of pipe materials and necessary earthwork in trenching and refilling of earth and restore to its original condition including dressing, dewatering incuding bailing out water where necessary all complete and also necessary testings and commissioning as per direction of the department i) 150 mm dia GI

ii) 125 mm dia GI

iii) 100 mm dia GI

iv) 80 mm dia GI

v) 65 mm dia GI

vi) 50 mm dia GI

4) Supplying, installation, testing and commissioning of Raw water submerssible pump set of different capacity at various PWSS under different divisions of the state. Supplying, installation, testing and commissioning of water lubricated Submersible Pump Set 3-Phase (for 5HP/ 7.5HP) / Single phase (for 1 HP / 2HP / 3 HP) pump with bronze impeller of suitable diameter all complete. The pump set should be coupled with wet type submersible electric motor drive of adequate power suitable for operation at 230V/ 415 V, 50 Hz input power including supply of steel cable rope, G.I. column pipe, suction strainer, Sluice Valve, Non-Return valve, sockets, bends, elbows etc. & GI delivery piping above ground up to sluice valve above ground level, electrical cable of adequate cross section, clips electrical switch gear (starter) etc., Electric Control Panel Board made of MS Sheet duly painted with Anti-corrosive paints complete fitted with all electrical accessories i.e. Off-On Switch, Voltmeter, Ameter, Indicator light etc., bright Annealed Electrolytic Bar Copper Conducted PVC insulated sheathed round flexible 3-core Cable of the Motor Manufactured conforming to IS:694/1990 all complete as specified and directed by the Department with One year warranty from the date of commissioning and satisfactory testing against any manufacturing defect. [If any such defect is found during the year from the date of installation and satisfactory testing, supplier will have to rectify the defect at their cost and risk & if necessary replace the pump set.] Test Certificate of Pump, Motor, Starter, Panel Board, etc. from the manufacturer shall have to be submitted: Recommended make:- Kirloskar/ Jyoti/ Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar or equivalent i) Head losses : 32 m, Single phase, 1 HP

ii) Head losses : 43 m, Single phase, 1 HP

iii) Head losses : 55 m, Single phase, 1 HP

iv) Head losses : 32 m, Single phase, 2 HP

v) Head losses : 43 m, Single phase, 2 HP

vi) Head losses : 55 m, Single phase, 2 HP

vi) Head losses : 32 m, Single phase, 2 HP

vii) Head losses : 43 m, Single phase, 3 HP

viii) Head losses : 55 m, Single phase, 3 HP

ix) Head losses : 32 m, Single phase, 3 HP

x) Head losses : 43 m, Three phase, 5 HP

xi) Head losses : 55 m, Three phase, 5 HP

xii) Head losses : 32 m, Single phase, 3 HP

xiii) Head losses : 43 m, Three phase, 5 HP

xiv) Head losses : 55 m, Three phase, 5 HP

xv) Head losses : 32 m, Three phase, 5 HP

xvi) Head losses : 43 m, Three phase, 5 HP

xvii) Head losses : 55 m, Three phase, 7.5 HP

xix) Head losses : 32 m, Three phase, 5 HP

xx) Head losses : 43 m, Three phase, 7.5 HP

xxi) Head losses : 55 m, Three phase, 7.5 HP

5) Supplying, installation, testing and commissioning of Centrifugal pump set of different capacity at various PWSS under different divisions of the state Supplying, installation, fitting & fixing, testing and commissioning of Electric driven 3-phase (for 5HP/ 7.5HP/10HP/12.5HP) / Single phase (for 1 HP / 2HP / 3 HP pump) Centrifugal pump set of approved make with bronze impeller of suitable diameter with G.I. suction pipe, suction strainer, non-return valve, delivery piping up to sluice valve all complete. The pump set should be coupled with electric motor drive of adequate power suitable for operation at 230V / 415 V, 50 Hz input power with DOL Starter /Star delta Starter including Electric Control panel board enclosure made of MS Sheet duly painted with Anti-corrosive paints complete, fitted with all electrical accessories i.e. Off-On Switch, Voltmeter, Ammeter, Indicator light etc., Complete wiring from Panel Board to Main Line including supply of Aluminium Armoured Cable of adequate cross section, Earthing wire and all necessary materials for the same, including cost of CC pump foundation with base plate complete and other accessories and labour charge for installation of the pump etc. all complete as specified and directed by the Department with One year warranty from the date of commissioning and satisfactory testing against any manufacturing defect. [If any such defect is found during the year from the date of installation and satisfactory testing, supplier will have to rectify the defect at their cost and risk & if necessary replace the pump set.] Test Certificate of Pump, Motor, Starter, Panel Board, etc. from the manufacturer shall have to be submitted: Recommended make:- Crompton Greaves/ Aquatic/ CRI/ GEC/ ALSTHOM/ V-Guard or equivalent i) Single phase, 1 HP

ii) Single phase, 2 HP

iii) Single phase, 2 HP

iv) Single phase, 3 HP

v) Single phase, 3 HP

vi) Single phase, 5 HP

vii) Single phase, 5 HP

viii) Single phase, 7.5 HP

ix) Single phase, 10 HP

x) Single phase, 12.5 HP

6) Construction, testing and commissioning of Rapid Sand Filter of Size 4m2/6m2 at various PWSS under different divisions of the state Construction of gravity type Rapid Sand Filter of Size 4m2/6m2 including aeration tray for effective filtration of raw water collected from Ground / Surface source, provisions for backwashing of the filter media, wash water trough and removal of sludge in regular interval, including earthwork in excavation for foundation trenches of walls, footing including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth, 100mm thick PCC in proportion 1:3:6 over brick flat soling, RCC of M25 grade for filter components and M20 for anciliary components, providing and mixing normal Plastisizer Plastiment BV 40 of Sika India Ltd. / Dr Sealkit Super plast WR 40 (Assian Chemicals)/ Rheobuild 1100 i of BAST @ 0.5%-0.8% by weight of cement in concrete for waterproofing structures, reinforment bars in RCC, 230mm brick work in proportion 1:4, 20mm thick inside and outside plastering, and painting with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint, earth/ Sand filling with river sand or silt (predominently non plastic), all formworks, shuttering & shoring, all complete as per direction of the deptt. and as per the specification and drawings provided by the deptt. Approved good for construction drawing will be issued by the deptt. i) 4 sq.m filter bed

ii) 6 sq.m filter bed

Supplying, fitting and fixing including labour charge of under drainage with 150 mm dia PVC manifold and 63 mm dia PVC laterals and interconnection of the filter unit including necessary GI sockets,Puddle collar, bends, Tees, Sluice Valves etc. , including supplying and charging of filter media considering all materials for the filter bed constructed as per the specification and drawing provided by the deptt. The specification of the sand and gravel is as below: (i) Sand should be hard, resistant quartz, free from clay, fine particles, soft grains, organic matter and dirt. Effective size of sand (d10) has to be within the range from 0.45mm to 0.7mm and uniformity coefficient (d60/d10) within 1.3 to 1.7. The effective depth of sand bed has to be 0.60 m. (ii) Gravel has to be hard preferably rounded stone and not crushed stone, with average specific gravity not less than 2.5 and shall be free from clay, loam and organic impuritues. Size range has to be from 2mm to 65mm properly graded as directed by the deptt. The effective depth of gravel bed has to be 0.50 m i) 4 sq.m filter bed

ii) 6 sq.m filter bed

7) Construction, testing and commissioning of Under Ground Reservoir of different sizes at various PWSS under different divisions of the state. Construction of RCC Under Ground Reservoir by excavating necessary earthwork, including dewatering, stabilising side earth, preparation of sub soil etc.,150 mm thick PCC in proportion 1:3:6, using M30 grade of concrete including dewatering if necessary, and curing complete, application of air entraining and water reducing plasticiser (masterplast PAE ) conforming to IS 9103-1999 @ 0.15 Lit per bag of cement (or equivalent) , and 15mm thick plastering and painting all complete, along with inlet channel, vent pipe and other pipe connections, form work, shuttering and shoring etc. for storage of treated drinking water of various capacities as per approved drawings and specification, along with 450 mm inlet channel with hydraulic jump for mixing of fluid,including fitting and fixing of 100mm dia GI outlet,vent pipes for storage of treated drinking water of various capacities as per approved drawings and specification all complete. Approved good for construction drawing will be issued by the deptt. i) 15000 liters ( 3.00 x 2.50 x 2.45 m )

ii) 20000 liters ( 3.20 x 3.20 x 2.45 m )

iii) 30000 liters ( 4.00 x 3.00 x 3.00 m )

iv) 40000 liters ( 4.00 x 4.00 x 3.00 m )

v) 40000 liters ( 5.00 x 3.20 x 3.00 m )

vi) 50000 liters ( 4.50 x 4.50 x 3.00 m )

vii) 50000 liters ( 5.00 x 4.00 x 3.00 m )

viii) 60000 liters ( 5.00 x 4.00 x 3.50 m )

ix) 60000 liters ( 5.30 x 3.75 x 3.50 m )

x) 70000 liters ( 6.00 x 4.00 x 3.50 m )

xi) 70000 liters ( 5.00 x 4.80 x 3.50 m )

8) Construction, testing and commissioning of Steel GRP Elevated Service Reservoir of different sizes at various PWSS under different divisions of the state. Construction of ESR of different capacities (considering SBC of soil as 8 ton/m2 ) with MS Staging of 16 m height and GRP ( Glass Reinforced Plastic ) water tank conforming to IS 14856: 2000 as per approved drawings and specification including earthwork in excavation for foundation trenches of walls, footing including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth, construction of RCC foundation, 15mm plastering in proportion 1:4 in RCC support pillars with M25 grade of concrete, painting in MS staging over anti-corrosive reactive compound, fitting and fixing of 150mm diameter thredded GI inlet, outlet, overflow pipes and 200mm diameter wash pipes,160 mm sluice valve, aviation lamp, MS ladder, all formworks, shuttering & Shoring, including materials and labour all complete in the jurisdiction of different division of PHE, Assam for the following capacities of water tank. Approved good for construction drawing will be issued by the deptt. i) Capacity : 10000 liters, SBC Soil : 8 ton/sq.m

ii) Capacity : 10000 liters, SBC Soil : 10 ton/sq.m

iii) Capacity : 10000 liters, SBC Soil : 12 ton/sq.m

iv) Capacity : 20000 liters, SBC Soil : 8 ton/sq.m

v) Capacity : 20000 liters, SBC Soil : 10 ton/sq.m

vi) Capacity : 20000 liters, SBC Soil : 12 ton/sq.m

vii) Capacity : 30000 liters, SBC Soil : 8 ton/sq.m

viii) Capacity : 30000 liters, SBC Soil : 10 ton/sq.m

ix) Capacity : 30000 liters, SBC Soil : 12 ton/sq.m

x) Capacity : 40000 liters, SBC Soil : 8 ton/sq.m

xi) Capacity : 40000 liters, SBC Soil : 10 ton/sq.m

xii) Capacity : 40000 liters, SBC Soil : 12 ton/sq.m

xiii) Capacity : 50000 liters, SBC Soil : 8 ton/sq.m

xiv) Capacity : 50000 liters, SBC Soil : 10 ton/sq.m

xv) Capacity : 50000 liters, SBC Soil : 12 ton/sq.m

xvi) Capacity : 60000 liters, SBC Soil : 8 ton/sq.m

xvii) Capacity : 60000 liters, SBC Soil : 10 ton/sq.m

xviii) Capacity : 60000 liters, SBC Soil : 12 ton/sq.m

xix) Capacity : 70000 liters, SBC Soil : 8 ton/sq.m

xx) Capacity : 70000 liters, SBC Soil : 10 ton/sq.m

xxi) Capacity : 70000 liters, SBC Soil : 12 ton/sq.m

xxii) Capacity : 80000 liters, SBC Soil : 8 ton/sq.m

xxiii) Capacity : 80000 liters, SBC Soil : 10 ton/sq.m

xxiv) Capacity : 80000 liters, SBC Soil : 12 ton/sq.m

xxv) Capacity : 90000 liters, SBC Soil : 8 ton/sq.m

xxvi) Capacity : 90000 liters, SBC Soil : 10 ton/sq.m

xxvii) Capacity : 90000 liters, SBC Soil : 12 ton/sq.m

9) Supplying, installation, testing and commissioning of DG set of different capacity at various PWSS under different divisions of the state. Supplying including installation, testing and commissioning of Air/Water cooled Diesel Generator set coupled to suitable alteranator of 220/415 V, AC, 1/3 phase 0.8 p.f mounted on a 1) M.S febricated base frame, 2) M.S fuel tank of required capacity. 3) Residual Silencer 4) Standard control panel 5) Suitable batteries with lead. 6) First fill of tube oil. 6) Acoustic enclouser complete with all acessories as specified and directed by the deptt. conforming to IS comprising the Technical Specification as per manufacture. (RANGE FROM KVA TO KVA) Kirloskar green/ bliss, leyland, Volvo pents, perkinson, Mahindra, Greaves, Escort engine and kirloskar, stamford, Leroy somer alternator. i) 5 KVA

ii) 7.5 KVA

iii) 10 KVA

iv) 12.5 KVA

vi) 20 KVA

10) Supplying, fitting, fixing, testing and commissioning of Distribution System comprising of different diameter at various PWSS under different divisions of the state. Supplying, laying , fitting & fixing UPVC pipes ( 6 kg/cm2 pressure ) conforming to IS 13592 (1992)including specials and jointing material such as cement lubricant, cutting of pipe materials, providing joints to pipes and specials with jointing material after roughening the surface and necessary earthwork in trenching and refilling of earth and restore to its original condition including dressing,minor road restoration , dewatering incuding bailing out water where necessary all complete and also necessary testings and commissioning as per direction of the department. i) 160 mm dia UPVC

ii) 140 mm dia UPVC

iii) 110 mm dia UPVC

iv) 90 mm dia UPVC

v) 75 mm dia UPVC

vi) 63 mm dia UPVC

11) Supplying, fitting, fixing, testing and commissioning of Functional Household Tap Connection at various PWSS under different divisions of the state. Construction of Functional Household Tap Connection including earthwork in excavation for pipe line (both for connection in distribution line and service connection) and refilling, dressing etc., providing PVC Saddle Piece of average size 110 mm x 15 mm (i.e. ranging from 63mm to 140mm) and make Supreme or equivalent, making holes in the distribution pipe, providing 15 mm dia bronze ferrule cock (PN-16) conforming to IS:2692 (1989) as ammended and make Zoloto or equivalent, connecting it to the saddle piece, providing and fixing 3 layer (Outer green / GREY coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R ( Poly propylene-random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply conforming IS 15801-2008 of length 10m from saddle piece to the tap point ( pipes of make from Departmentally empanelled manufacturers and PN-16 Pipe,20 mm OD,SDR-7.4) including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages, including all taxes and duties as applicable and including the cost of all required labour and materials as directed and specified. The item also inludes construction and installation of R.C.C Hydrant Pillar of size 100mm x 100 mm , height 1200 mm with 6 mm dia bar embeded to RCC Post in proportion 1:1.5:3 with 4 nos 10 mm dia main and 6 mm dia stirrup @ 150 C/c and fixing 15 mm dia PPR pipe to the hydrant, with 6 mm rings embedded in concrete for anchoring inclusive of cost of transportation to site and also supplying fitting and fixing PVC Bib cock all complete as directed and specified. Approved good for construction drawing will be issued by the deptt.

12) Construction of boundary wall at various PWSS under different divisions of the state. Construction of boundary wall including necessary earthwork in excavation for foundation trenches of walls, footing of columns including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth, 100 mm thick PCC in proportion 1:3:6 over flat brick soling, with brickwork in cement mortar in proportion 1:4 with 230mm thick first class brick in sub-structure upto plinth level and 112 mm thick above plinth upto height of 0.50 m, including fitting and fixing chain link fencing of 10 SWG GI wire 50mm x 50mm mesh with MS angle of size ISA 50x50x6 including supplying, fitting and fixing hooks, eye bolts with nuts, staples, bolts etc. and providing RCC pillar of 0.20mx0.20mx 0.40 meter height above GL at 2.5 meters apart and for gate 2 nos. posts of size 0.30mx0.30mx 1.60 meter above ground level, tie beam of 0.20mx0.15m cross section, 4 nos. 12mm dia main bar for each gate post and also for each boundary colums and stirrups @ 150mm c/c and plastering in proportion 1:4, and applying primer and 2 coats of emanel paints on metal surfaces of gate and fencing, and colour washing with lime of approved brand incuding form work, shuttering and shoring all complete as directed and specified by the by the deptt. Approved good for construction drawing will be issued by the deptt.

13) Construction of Double Leaf Heavy Duty Iron Gate at various PWSS under different divisions of the state. Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

14) Construction, testing and commissioning of Valve Chamber for Sluice Valve of different sizes at various PWSS under different divisions of the state. Constructing of Brick masonry Sluice Valve Chamber 750mm(L) x 750mm(B) x 1250mm(H) inside, in 230mm brick work in cement mortar 1:5 (1 cement : 5 coarse sand) and precast R.C.C cover slab in prop. 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire including necessary earthwork (excavation and return filling), 75mm PCC in prop. 1:4:8 (1 cement:4 coarse sand : 8 coarse agg.) over brick flat soling and 15 mm thick inside plastering and outside plastering (upto 150mm from top) with cement mortar 1:5 (1 cement : 5 coarse sand) , complete as per standard design, including Supplying, carrying, placing in position, fitting and fixing 80mm diameter CID/F sluice valve all complete as directed. Approved good for construction drawing will be issued by the deptt. i) For 80mm dia Sluice valve against 90mm/ 75mm dia Distribution pipe line - 1 no. 80mm dia CID/F sluice valve with cap/ wheel as per IS 14846-2000 PN 1.0 with ISI marking, 2 nos. 80mm dia GI Nipple (225mm long), 4 Nos. 80mm dia GI Threaded Flange, 2 Nos. 90mm dia UPVC Flange, 26 Nos. Bolts & nuts and 6 nos. 3mm thick rubber insertion sheet for 100mm dia pipe.

ii) Constructing of Brick masonry Sluice Valve Chamber 900mm(L) x 900mm(B) x 1250mm(H) inside, in 230mm brick work in cement mortar 1:5 (1 cement : 5 coarse sand) and precast R.C.C cover slab in prop. 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire including necessary earthwork (excavation and return filling), 75mm PCC in prop. 1:4:8 (1 cement:4 coarse sand : 8 coarse agg.) over brick flat soling and 15 mm thick inside plastering and outside plastering (upto 150mm from top) with cement mortar 1:5 (1 cement : 5 coarse sand) , complete as per standard design, including Supplying, carrying, placing in position, fitting and fixing 100mm/ 125mm/ 150mm diameter CID/F sluice valve all complete as directed. Approved good for construction drawing will be issued by the deptt. For 100mm dia Sluice valve against 110mm dia Distribution pipe line - 1 no. 100mm dia CID/F sluice valve with cap/ wheel as per IS 14846-2000 PN 1.0 with ISI marking, 2 nos. 100mm dia GI Nipple (225mm long), 4 Nos. 100mm dia GI Threaded Flange, 2 Nos. 110mm dia UPVC Flange, 28 Nos. Bolts & nuts and 6 nos. 3mm thick rubber insertion sheet for 100mm dia pipe.

iii) For 125mm dia Sluice valve against 140mm dia Distribution pipe line - 1 no. 125mm dia CID/F sluice valve with cap/ wheel as per IS 14846-2000 PN 1.0 with ISI marking, 2 nos. 125mm dia GI Nipple (225mm long), 4 Nos. 125mm dia GI Threaded Flange, 2 Nos. 140mm dia UPVC Flange, 30 Nos. Bolts & nuts and 6 nos. 3mm thick rubber insertion sheet for 125mm dia pipe.

iv) For 150mm dia Sluice valve against 160mm dia Distribution pipe line - 1 no. 150mm dia CID/F sluice valve with cap/ wheel as per IS 14846-2000 PN 1.0 with ISI marking, 2 nos. 150mm dia GI Nipple (225mm long), 4 Nos. 150mm dia GI Threaded Flange, 2 Nos. 160mm dia UPVC Flange, 30 Nos. Bolts & nuts and 6 nos. 3mm thick rubber insertion sheet for 150mm dia pipe.

15) Construction of supporting pillar of size 0.25 m x 0.25 m section at low laying area for Distribution network at various PWSS under different divisions of the state. Construction of RCC M25 Supporting pillar to be used as support of pipeline for crossing of culverts etc. of 0.25x0.25m size and height varying from 0.5m to 1.5m above GL, including necessary earthwork, 75 mm thick PCC in prop. 1:3:6 over flat brick soling, foundation of size 0.80 x 0.80 m x 0.125m(depth) with 8mm dia reinforcemnt @ 150mm c/c both sides, and 12mm dia main reinforcement for the pillar with 8mm dia single legged stirrup @150mm c/c, 15mm thick plaster including shuthering / shoring and all complete as per direction of the deptt. Approved good for construction drawing will be issued by the deptt. i) Supporting pillar of height 0.50 m above GL

ii) Supporting pillar of height 0.80 m above GL

iii) Supporting pillar of height 1.00 m above GL

iv) Supporting pillar of height 1.20 m above GL

v) Supporting pillar of height 1.50 m above GL

16) Construction of pump house of size 3.00 m x 3.00 m x 3.00 m at various PWSS under different divisions of the state. Construction of Pump House of size 3.00 m x 3.00 m x 3.00 m including necessary earthwork, 100 mm thick PCC in prop. 1:3:6 over flat brick soling, foundation of size 0.80 x 0.80 m x 0.15m(depth) with 12 mm dia reinforcemnt @ 120mm c/c both sides, and 12mm dia main reinforcement for columns of size 0.20x0.25m with 6 mm dia stirrup @150mm c/c, RCC M20 roof of thickness 100mm with 10mm dia reinforcement @ 120mm c/c, 15mm thick plaster including shuttering. Providing and laying plain/reinforced CC work with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete. Including 1st class brick work of 108mm thickness and providing wood work in frame (Chowkat) of door window and other similar works as directed (a) With 1st Class timber Hollock/Bonsun along with fitting and fixing 1st class local wood/Gamari Bonson/Hollock/ Sundi battend ledged and braced door. including 65mm thick Cement Concrete flooring considering of 50mm under layer of 1:3:6 and 15mm thick cement plastering in cement mortar 1:4 all complete as per direction of the deptt. Approved good for construction drawing will be issued by the deptt. i) Size: 3.00 x 3.00 x 3.30 m

ii) Size: 3.00 x 4.00 x 3.30 m

17) Supplying fitting & fixing of Bulk Flow Meter conforming to ISO: 4064/1 Providing, installation, testing and commissioning of Bulk Flow Meter with removable mechanism class "B" confirming to ISO: 4064/1 including all materials (excluding CI/DI fittings) and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipe line etc complete in all respect as per technical specification and as per direction of Engineer. i) BFM80 for DN 80 mm

ii) BFM100 for DN 100 mm

iii) BFM125 for DN 125 mm

iv) BFM150 for DN 150 mm

v) BFM200 for DN 200 mm

18) Supplying, installation and testing of electrically operated chemical dosing pump. Supply, installation, testing and comissioning of electrically operated chemical dosing pump of 6 L capacity and 6 kg/cm2 complete with PVC solution mixing container and electrical wiring with panel board fitting and fixing at site with suction and discharge tubings Standard Materials for construction Housing :- Fiber reinforced plastic Spacer & Head :- Poly propylene/UPVC Diapharm :- Tefflon Faced Hupalon Ball :- PTFE Suction & discharge ball cartidge :- Poly propylene/UPVC Suction & Discharge Tubings :- HDPE/LDPE MS Fabricated stand for mixing container

19) Drawl of power line from APDCL. For facilitation of power connection from APDCL, liasoning with APDCL to obtain load sanction, preparation of estimate with APDCL authorities, charging of transformer etc. all complete as directed. Payment to the awarded contractor, apart from the liasoning fees, regarding the execution of the work will be reimbursed by the Department in actual.

20) For repairing Works/ any other works i) APWD SOR 2013-14 (Building) A) Percentage Above

B) Percentage Below

ii) APWD SOR 2018-19 (Roads) A) Percentage Above

B) Percentage Below

iii) APWD SOR 2013-14 (Electrical) A) Percentage Above

B) Percentage Below

iv) APWD SOR 2013-14 (Water & Sanitation) A) Percentage Above

B) Percentage Below

v) APHE SOR 2015-16 A) Percentage Above

B) Percentage Below

Anuwer Hussain

RD Enterprise

Sri Dhrubajyoti Kakati

MD GAFUR

TRIDIP RANJAN DUTTA

Supratim Dutta

HNB Enterprise

BJS TRADING

M/S ALLIED CONSTRUCTION

Khitish Ojha

Sahabuddin Ahmed

Altaf Ahmed

Jahanara Begum

Bishal Senapati

Khogen Gogoi

KISHORE RANJAN BARUAH

GLOBAL ENGINEERING

ASWINI KUMAR SAIKIA

SURAJ DUTTA

M/S MILON CHANDRA DAS

SUN ENTERPRISE

sontush borah

INNOVUS INFRATECH

GRAVITY ENGINEERING CONSORTIUM

AZIZUL HOQUE

AJAHARUL ALAM

Md. Ashique Ikbal

Hibjur Rahman

Md. Dulal Uddin

SHAK FARUQUE ABDULLA

REKIBUDDIN AHMED

MD AZIZUR RAHMAN KHAN

JAKIR HUSSAIN

SRI SIBASHIS SAHA

HARUN RASHID

DINA KANTA SONOWAL

M/S AGARWALLA AND SONS

M/S RAHUL TRADE AND AGENCY

K.B.S COMMERCIAL (P) LTD.

SONTOSH SAHEWALLA

KEA CONSULTANTS PVT.LTD

O P KANDOI AND CO PVT LTD

SONJIB DAS

GOURI SANKAR DEKA BORUAH

Shoiab Khan

Probin Dihingia

Lakhi Das

M/S BIRESWARI ENTERPRISE

SYED ABDUL TARIK

M/S SWAPNA GOGOI

RUPAM DUTTA

P. D. CONSTRUCTION

M.J. ENTERPRISE

M/S RAJ ENTERPRISE

Landmark Engineering

SRI GOPAL DEKA

CHANDAN BORUAH

Dynamic Engineers and Company

MS LILI ENTERPRISE

Rohit Construction

Shri Jayanta Hazarika

NIPUL SAHU

MRINAL ADHIKARY

M/S ZANA ENTERPRISE

GUNA GOBINDA GOGOI

ANISUR RASHID

PRANJAL GOGOI

DHRUBAJYOTI DUTTA

TRIDIP CHETIA

NIRANJAN KAKATI

M/s Dhananjoy Talukdar

Coupler Contrive Pvt Ltd

BIKRAMJIT DUTTA

Sudhang Kumar Brahma

APURBA LAHON

dambaru gogoi

Krishna Borah

trimurti associates

LAHON BANIJYIK ENTERPRISE

BRIGHT SOLAR LIMITED

M/S MD FOYZAL HOQUE

BHABEN PHUKAN

B K ENTERPRISE

ABHISHEK ENTERPRISE

Sri Animesh Ghosh

M/s. THINK BRAND

MD EYAJUL HAQUE

MD GULZAR HUSSAIN

NURUZ ZAMAN

MOIN KHAN

Sri Pankaj Kalita

BADIU JAHAN

HAZRAT ALI

M/S Rongpur Constructor Private Limited

M/s D.M. ENTERPRISE

SURAJ KUMAR SHARMA

DEBAJIT BORAH

J.B.Engineers And Associates

M/S M.Bee Traders

SRI BIJAY KUMAR MORE

ATUL HATIMOTA

MD OSMAN ALI

NISHI PAD SWARGIARY

SRI NAGEN DAS

CHIRANJEEV DEV MAHANTA

MD TAFAZZUL ALI

Purvattar Enterprise

Prasanta Kumar Borthakur

Sri Manoj Pareek

PRABAL RAJKHOWA

Abdul Lais Ahmed

Mrinal Jyoti das

DULAL BHARALI

krishna kanta Biswas

JAYANTA KUMAR DEKA

BAHARUL ISLAM

M/s Macrocosm Builders

DEBADIB DAS

PADMESWAR DEKA

Naruttam Changmai

ABU BAKKER SIDDIQUE

Jadab Ch Mazumdar

ABDUL WAHAB

ABU NASAR WAHID CHOUDHURY

Bidyut Das

ABDUL HANNAN

Saidul Islam

Bapan Kumar Barman

ANUPAM NIRMAN PVT. LTD.

MANOJ KR. HARLALKA

Arun Enterprise

Balram Singh

Sri Siddhartha Chutia

RAJU CHANDRA BASUMATARY

Sanjib Deka

M/S. D.K. ASSAM ASSOCIATES PVT. LTD.

M/S R.S. Enterprise

M/S Nirman

JINIK ENTERPRISE

Brahmaputra Engineers

MS MH ENTERPRISE PVT LTD

SRI RINKU KONWAR

MUKTAZUL HOQUE

MD ASRAFUL HUSSAIN

NIPEN BISWAS

GOUTAM KUMAR KAKATI

MD. ABRARUL MUZID KHAN

MD. ASMAT ALI

INDRA MOHAN DEKA

SUMAN SAHA

DEEP KUMAR RABHA

ACHARUDDIN

DURGA CONSTRUCTION AND ENGINEERING

NAKUL CHANDRA SARMAH

M/S SAFIQUAL ISLAM KHAN

MRIDUL BORDOLOI

J.K.COMMERCIAL

PAWAN COMMUNICATIONS PRIVATE LIMITED

SAMUDRA NARAYAN MEDHI

Mousum Bora

NRIPEN SHARMA

BINOD BARTHAKUR

PRABHAT HIRA

PRAMUD SAIKIA

hanuman distributors

MANAB AMPHILI

ATUL CH BORA

PRADIP BAISHYA

KALPANA CONSTRUCTION

M/S UTISH ENTERPRISE

DULAL KALITA

M/S KIRAN HAZARIKA

M/S NIRMAN CONSTRUCTION

ATAUR RAHMAN

SRI RITU PARNA KONWAR

Pyramids Construction

DAL THOMS SCIENTIFIC

GOBIN CH BARO

Prasanta Kumar Baishya

M/S Saudamini and Co.

SAILAJA COMMERCIAL CONSTRUCTION PVT LTD

KESHAB GOGOI

PULEN HALOI

Sri Prasanta Sharma

M/S Raidongia Welding Workshop

HIGH TECH ENTERPRISE

M/S ASSAM STEEL ENTERPRISE

RUPAM SONOWAL

Manas Jyoti Handique

PRAKASH ENTERPRISES

Sri Monuj Gogoi

Sri Suresh Dehingia

KESHAB GOGOI

RINKU MILI

NITUL KHANIKAR

SYED AMINUL ISLAM

Sri Budheswar Bura Gohain

BIJOY SAIKIA

PRINCE ALI

Sri Chandan Sonar

ARUP GHOSH

BABUL KRISHNA HANDIQUE

HAMANTA DAS

M/S PAM ENTERPRISE

KIRAN SHARMA

APURBA GOGOI

Sri Monuj Boruah

Kalyan jyoti gogoi

TRILOCHAN SINGH

TS ENTERPRISE

Syed Mofizul Islam

City Heart Offset

CHANDAN BURAGOHAIN

M/S Archangel Group

SDCONSTRUCTION

Sushil Kr. Khound

S D SALES

M/S S.A. TRADING

NABADWEEP PATHAK

KESHABA NANDA PHUKAN

Sanjib Bhattacharjee

r r enterprise

Anshudeep Pathak

M/S Afcons

M/S ONE STAR ENGINEERING

Ganesh Neog

TRADE AND TECHNOLOGY

Kalpa Bora

Karuna Bora

Ram Ch. Roy

Ikram Hussain

Naba Kumar Borah

Jitu Borah

BIPUL GOGOI

Momin Ali

Diganta Kumar Borah

Harish Ullah

Mrinal kr Bora

Jatin Ch. Nath

M/S RAJ AND RAJ ASSOCIATES

Purnananda Das

Utpal Kr. Saikia

Ponkit Das

PRANJIT KUMAR NATH

Paritosh Mitra

Sanjib Kumar Bora

Jiten Hazarika

Bipul Sarkar

Mazibur Rahman

M/S Swapna Electrical Works

Shri Debajyoti Das

Sri Manoj Konwar

Rabindra Karmakar

Dibya Jyoti Das

Kalyan Jyoti Bora

Abu Bakkar Siddique

GOPAL DEKA

M/S BHANU TRADE AND INDUSTRIES

SANJIT DEKA

M/S MAYUR ASSOCIATES

SRI SEWJI RAI

MS Embee Associates

ZENITH ENTERPRIESE

BORNIL BURAGOHAIN

Sri Jambu Lama

SURAJT BORAH

Sri Prasanta Sarmah

Sri Keshab Chutia

B B Enterprise

MP AGARWALA PVT.LTD

MANOB DUTTA

Bikash Enterprises

AVIJIT DUTTA

DIGANTA HAZARIKA

JHARNA BORTHAKUR

IMTIAZ HUSSAIN

M/S P.M.TRADERS

AMRIT GOGOI

RAJIB LOCHAN DUTTA

BRIGHT AND BOBBY ELECTRICAL HOUSE

MONJIT SAIKIA

BORBORAH AND SONS

MAA ENTERPRISE

SINTU KHATONIAR

ananta bhuyan

Luit Construction

PRINCE AGRO MACHINERY

ASOMI CONSTRUCTION & SUPPLY SYNDICATE

ROMESH CHANDRA DAS

Upper Assam Associates

Electrical Trade Centre

DIBYA JYOTI SAIKIA

TAHIR HUSSAIN

Jitu Gogoi

TAPAN BORAH

RIBON BORAH

Md Sirazul Haque

GLOBAL ASSOCIATES

SUNIL KALITA

SRI DHRUBA JYOTI BORAH

BEE KAY ENTERPRISE

PRANJAL KUMAR PARASAR

ADITYA SARMAH NEOG

ECM ASSAM

R K SHARMA

Munindra Bhuyan

Pranjal Pran Bailung

BIRAJ KR NANDI

Shahabuddin Majumdar

Husnara Begum

Nripen Ch Bora

Abdus Subhan

Purnima Begum

Bidyut Bora

Pratap Chandra Sarmah

Tomir Uddin Ahmed

Sharif Uddin Ahmed

Md Saidur Rahman

Motiur Rahman

Md Abu Hanifa

Amdadul Hussain

GLOBAL ENTERPRISE

M/S GLOBAL CONSTRUCTION GROUP

Musfikur Rahman

Osman Ali

Azizur Rahman Choudhury

Idrish Ahmed

Mojibur Rohman

Kangkan Jyoti Nath

Md Nur Ahmed

Md Mojibur Rahman

Mainul Haque

IMDADUL HUSSAIN

MD JAMAL UDDIN

Gulap Hussain

MD SIRAJ ALI

Saib Ali

Nepal Sarkar

Dipu Hazarika

Idrish Ali

ALI AKBAR

Aminul Haque Choudhury

Kanak Chnadra Nath

Dipu Saikia

Surjya Kumar Borah

Sarat Hazarika

Mamtaz Begum

Md Nawshad Ali

SAMADUR RAHMAN

M/S P.N. ENTERPRISE

AKSHAY BORAH

Mr. Arupjyoti Gohain

NRIPEN NATH

Competent Infrastructure and consulting(CICON) Pvt.Ltd

R.S.D.ENTERPRISE

BICHITRA GOGOI

ACHYUT GOBINDA BARUAH

Chiranjit Borah

D KUMAR AND SALES

D KUMAR AND COMPANY

KONGKON JYOTI BORA

BEDABROT SAIKIA

PRAKASH JYOTI GOGOI

ABHIJIT MAHANTA

Shiva Soltronics Private Limited

Hi Tech Construction And Supply

SAIKIA N ASSOCIATES

PIYUSH KAYAL

SUBAL CHANDRA BHOWMICK

MANTAZ UDDIN

JAKIR HUSSAIN

NOOR UDDIN

Shanu Paul

ASHOK HARAN

Anup Biswas

Sudhan Roy

Rakesh Ghosh

REHANA BEGUM

SAMAR GHOSH

PABITRA CHANGMAI

jyoti and co

Sri Dipu Borah

ALAMPURIA ENTERPRISES

BRAHMAPUTRA CONSTRUCTIONS

Rabindra kumar Dey

RAHUL DEY

DHRITISHMAN MEDHI

Ganesh Saikia

Bora Electricals

Bharat Bora

Bhaba Kalita

Kashi Prasad Poddar

KAMAL KUMAR SURANA

Uddipta Sankar Pathak

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

M/s Nawab Enterprise

Contractor

Contractor

M/s Nur Enterprise

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Choudhury Enterprise

Contractor

PURBANCHAL BUSINESS SYNDICATE

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

Electrical And Electronics

RABIN CHANDRA SARMAH

Contractor

Contractor

Contractor

Contractor

Contractor

Contractor

M/S Bhargav Construction

Miss Runu Bharali

SRI BISHNU SAIKIA

Mridul Kr Bora

Md Gazibur Rahman

MD. FAZLUR RAHMAN(T)

Kamaleswar Deka

Baharul Islam

Sajan Ahmed

Abu Bakkar Siddique

Contractor

BHUPEN DEKA

Contractor

Utpal Bora

Tilak Biswas

Subham Debnath

Md Easin Ali

Subhrajyoti Saikia

Dulal Hussain

Partha Sarathi Borah

Sadananda Hazarika

Asraful Alom

Tapash Talukdar

TAPAN SHARMA

Contractor

Prahlad Deka

Anjan Borkakati

Rahan Uddin Ahmed

SRI JUGAL MANI SAIKIA

Pankaj Saikia

Fakar Uddin

Md. Mannas Ali

Musatafa Kamal

Dipak Kumar Deka

Fakar Uddin

Mogit Farocky

SAURAV GOGOI

Purna Kanta Gogoi

TIKENDRAJIT NATH

DIPA CHETRI

DULAL BORA

BINIT KUMAR MAHANTA

HAREN UDAY SHARMA

M/S M.H. ENTERPRISE

M/S KALYAN ENTERPRISE

ABHISHEK SAIKIA

M/S H R ENTERPRISE

MITALI OJAH GOGOI

A.B. Enterprise

M/S D.S. ENGINEERING ENTERPRISE

INDRA KAMAL SAIKIA

Dipen Mohan

Sri Pankaj Das

BRAHMAPUTRA BUILD AND CONSTRUCTION

RUPAK GOGOI

DEBU KONWAR

MUKTA MORAN

MONUJ KUMAR

PRASENJIT PHUKAN

Arsiddh Infraprojects

SRI SWAPAN BANIK

MD SAHA KAMAL

MANASH CHETIA

NANI MADHAB GOGOI

DINESH BORGOHAIN

M/s Synergy Enterprise

TRAILUKYA GOGOI

Iqbal Hussain

SWAROOP JYOTI BORA

RITURAJ BORAH

ASHADUZ ZAMAN

JAYANTA DAS

M/S REINFORCED CONCRETE SOLUTIONS

Friend Enterprise

Krishna Kanta Das

Raju Kar

Alok Kumar Biswas

Ashish Paul

Rajia Sultana

Pradip Ghosh

Kishalay Gupta

Md. Abul Hussain

Nigam Ghosh

M/S Swastik Hardware

Shyamal Paul

Ratna Biswas

Bikram Ghosh

Alauddin Choudhury

Ranju Kumar Yadav

Prahllad Choudhury

Fazar Ali

SANJAY SARKAR

Ajay Chandra Ghosh

Bakul Nath

Bappi Majumder

DEBOJIT PHUKAN

M/s S.B. Engineering

SUBRATA BHOWMICK

M/s B.S. Enterprise (Prop. Bittu Sarkar)

DWIBAN KUMAR BARO

SUDIP BHOWMICK

Sri Bhupen Nath

SSD Construction

Sri Hemanta Phukan

M/S BARUAH TRADERS

Bibhuti Phukan

NAREN BORUAH

PARSWA JYOTI GOGOI

TRIPTY ICE FACTORY

SATYAJIT KAKOTY

M/S RADHESHYAM ENTERPRISE

K.K. BORDOLOI

BINA GOGOI BARUAH

S.K. ENTERPRISE

DIGANTA SAIKIA

SANJIB SAIKIA

Dhiren Kalita

LALITYA BARUAH

DILIP GOGOI

M/S J AND P ENTERPRISE

BIPLAB DUTTA

M/S HANKAR ENTERPRISE

PRASANTA BHARALI

RANJIT BORGOHAIN

JITUL PHUKAN

MONMOTH GOHAIN

SPECTRUM OFFSET

M/S JAPI ENTERPRISE

B.R ASSOCIATES

ARIF MOHAMMED

LATIF EARSHAD

BASANTA KALITA

JYOTIPRASAD DAS

DEVI PRASAD DEHINGIA

SRI BHABENDRA NATH KONWAR

Palashprotimborah

BISHNU BORTHAKUR

PRASANTA BORTHAKUR

BINANDA SENSUA

M/S MON ENTERPRISE

NITUL HAZARIKA

DIGANTA TAMULI

UMASANKAR SHARMA

BUDHESWAR BAKAL

MOHD IMUL ALI

FAIZE HUSSAIN

ZAKIRUR RAHMAN BORAH

PRADIP AGARWALLA

UTPAL MAHANTA

c n c Hardware and Electrical

DIPANKAR HAZARIKA

MG ENTERPRISE

ZSEE SMART SOLUTION INDIA PRIVATE LIMITED

M.M. ENTERPRISE

NIRESWAR BAKALIAL

M/S PULIN SONOWAL

M/S S. & D. ENTERPRISE

DHARMENDRA DEORI

UDOY BHASKAR DOLEY

PRODIP RAJKHOWA

AKASH BURAGOHAIN

MUKUL BORA

MONI KR MILI

Jyoti Prakash Hazarika

DIPU KUMAR BORAH

DIPUL BPORDOLOI

MAKHAN HUSSAIN

SRI PRONAB BORAH

JAYANTA BORA

SUJIT DUTTA

SANTANU CHANGMAI

PRODIP DEY

KRISHNA CHETRY

MRIDUL BHATTACHARYYA

ABHIJIT PHUKAN

TARUN HAZARIKA

RATNESWAR BORUAH

GOPAL MOZUMDER

jugal boruah

Rupa Daw

PRATUL DEB

BHASKAR JYOTI GOGOI

Karnaljeet Hazarika

M/S TECHNOLINKS

NITUL ENTERPRISE

R.N.ENTERPRISE

PRABIN CHETIA

Kamal Kumar Modi

Riaansh Corporation

MRIDUL SAIKIA

Sayed Zulfiquer Ali Mustafa

Arup Bora

BICHITRA PHUKAN

Sri Amrit Mall

Sri Ajit Bharali

Lulu Saikia

M/S SWARAJ CONSTRUCTION

BBS CONSTRUCTION

Khagen Konch

Sri Ratul Boruah

DULAL CHANDRA BORAH

Sri Montu Kumar Nath

Sri Jatin Ch Saikia

Sri Rajib Kumar Bordoloi

Sri Khitish Mahanta

Sri Satya Changmai

Madhab Enterprise

Sri Achyut Saikia

BISHNU RAM BORA

Sri Bhabani Saikia

M/S Engineers Construction

DB TRADING CO

PRANJAL BORCHETIA

SUBHSHREE INFRAA

SARAWGI AND SONS

PARTHA PRATIM SHARMA

Sankalpa Associates

Rajnath Sarmah

K K BARUAH ENTERPRISE

M/S BG ENTERPRISE

BASANTA HANDIQUE

ABONI SARMAH

KHIROD GOGOI

TAPAN DUTTA

SAHIL AKHTAR

BIPLOB DAS

DIGANTA GOGOI

ACHYUT SAIKIA

SANJAY NEOG

GAUTAM BORGOHAIN

ABHIJIT HAZARIKA

M/S S H ENTERPRISE

Mehbuba Sultana

ABDUL HANNAN

RIDIP BIKASH DUTTA

MRIGEN BORUAH

Arnab Buragohain

Sri Birinchi Konwar

ANUJ BORA

Sri Arupjyoti Gogoi

Dipen Dekaboruah

SURESH JAIN

JITU GOGOI

M/S THOUNKYO ENTERPRISE

UTTAM GOGOI

M/S MINTU SAIKIA

UTPAL NATH

M/S Hygienic World

LACHIT HANDIQUE

HEMONTA THENGAL

RAJESH JAIN

MREEGEN SAHARIAH

JYOTI CONSTRO COMMERCIALS

KAMAKHYA ENTERPRISE

ABHINAB ENTERPRISES

NIPUL KUMAR BORTHAKUR

PRABHAT DUTTA

ZAKI ENTERPRISE

M.H. CONSTRUCTION

Bhupen Baruah

Bhupen Baruah

SHREE ANANT UDYOG

JYOTIRANJAN BORA

GOURABJYOTI GOGOI

PABAN BARUAH

ABU SHAH SAGIR HUSSAIN

M/S SUN ENTERPRISE

SRIMANTA BARUAH

Mridupaban Borah

BIJU DUTTA

RAKSHA SHOPPE

SUMANTA BORA

Sri Nitul Senapati

M/S DUTTA ENTERPRISE

BIDYUT BURAGOHAIN

HIREN BORAH

DHRUBA JYOTI GOGOI

SRI PURNAKANTA HAZARIKA

PRANJAL BORTHAKUR

M/S R S ENTERPRISE

SOMIR DUTTA

RIJU CHANGKAKOTI

HEMANTA KHANIKAR

SUSHIL KALITA

RAJIB BARUAH

NABAJYOTI BORAH

RANA LAXMI BARUAH

SIBARAM KALITA

TARUN BORDOLOI

RAJU KUMAR HAZARIKA

ATUL BORBORUAH

DHANESWAR GOGOI

PUTUL CH HAZARIKA

AGRAJIT SAIKIA

M/S P AND P ENTERPRISE

FAIRDEAL SOLUTIONS

Putul Chandra Borah

SANJIB KABRA

PRADIP KALITA

PARASH BORA

M/S Abhiruchi Enterprise

NOREN BORGOHAIN

PRODIP GOGOI

Sri Porag Kakoty

R. B. Enterprise

PRANAB PHUKAN

ROSHID ALI

TUTU UPADHAYA

JATIN KUMAR SAIKIA

PRABHDIP SINGH

LABAJIT KALITA

BUBU GOSWAMI

Kaustav Saikia

MOINA GOGOI

Dochania and Company Private Limited

CHANDRA GOGOI

PARAG CHUTIA

Dilip Taye

Phatik Gogoi

RAMEN GOGOI

MADHAB HANDIQUE

SAHARUL AMIN BARBHUIYA

DEBABRAT DUTTA

B R ENTERPRISE

REKIBUDDIN AHMED

ASHOK KUMAR DUTTA

MAYNUTDDIN AHMED

MRIGEN BORAH

M/S J.K. TRADERS

M/S FIRMCO(INDIA)

ASHIM MAHANTA

M/S DHB MULTIPURPOSE ENGINEERING ENTERPRISE

HAMENDRA SAIKIA

CHANDRA HANDIQUE

NILOTPAL BORAH

SANJEEV BARUAH

BIJIT KUMAR PAUL

YUVARAJ UPADHYAYA

JITEN URANG

MAKHMUD ALI

BIBEK GOGOI

Pankaj Chetia

Niranjan Saikia

Brahmaputra Udyog Pvt Ltd

RANJAN KUMAR DUTTA

ANANGA SONOWAL

KUMUD CHANDRA DOHUTIA

BIPUL GOGOI

VISHAL BAHETI

BIDYUT DUTTA

PABAN GOGOI

ROYAL ENTERPRISE

RAMEN SONOWAL

BIJU GOGOI

M/S S.K. ASSOCIATES

GAUTAM DAS

NIRMAL MORAN

Kuldip Gohain

BHARGAV ENTERPRISE

BORNALI BHUYAN

SUN STEELS (INDIA)

MEGA DRILLING COMPANY

ASSAM POWER AND CONSTRUCTION

ASHIM KUMAR HAZARIKA

M/s Hemanta Singha

Nabajyoti Neog

SRI GANESH AND CO

M/S SHIVCO (INDIA)

M/S MANSAROVAR ENGINEERS

NRIPEN BARUAH

M/S NABAB ENTERPRISE

ABHIJIT SONOWAL

SARAT PHUKAN

PRADIP PRASAD THAKURIA

MUKUL BURAGOHAIN

FARMCO INDIA

RD Sales Corporation

RANJIT KUMAR BORAH

DIGANTA BORUAH

GLOBAL POWER AND ENGINEERS

BALURAM DUTTA

Sk. Samsher Ali

Probin Konwar

MADHUJYA DUTTA

Subhan Ali

PULAK PHUKAN

BITUPAN KUMAR BARUAH

M/s B R P Enterprise

RUMEE CHUTIA BORAH

DEBABRAT BURAGOHAIN

NABAJYOTI BORAH

SHYAM STEELS

SURESH DAS

DIBYO JYOTI BORA

Sachin Haloi

SALIM AHMED MAZID

Mohsin Mahmood Reza

RITUPON DEORI

M/s Ambey Associates

SRT Enterprise

Subhash Sarma

Subhash Enterprise

Amrit Kalyan Gogoi

MOHD PUNAKON ALI

SAMARTH ENTERPRISE

DULAL CH MECH AND CO

North Eastern Engineers

M/S LAXMI ASSOCIATES

Global Oilfield Services (P) Ltd.

BARUAH ENTERPRISE

RAJENDRA RAY

Power Tools and Engineering

vishal trade links

Vishwanath Projects Limited

M/S DEE ESS ENT.

Bidder Name

Abu Nasar Ansary

Anuwer Hussain