REPAIR / MAINT OF GI, DI, CI PIPELINE AT WALDEVI PUMPING STATION, DHARNA PUMPING STATION AND AOP AREA UNDER GE NASIK ROAD.

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Taking up cast iron/DI pipe of 200 mm dia incl fitting with spigot & socket ends of following dia all as directed at site.

Supply and laying of Ductile iron pipes K-9 (tyton joint ) with spigot and socket ends centrifugally cast in any length laid in trenches of size 200 mm dia complete all as specified

Supply and fix in replacement of non return valve flanged of class 1.6 PN ,300 mm (12”)dia..Make Kriloskar with flanged as per IS:5312 body ring -Bronze IS: 318 Gr gaskit-natural rubber Flange drilling-IS: 1538 P 1.6

Supply and fix in replacement of Sluice Valves, flanged of class 1.6 PN ,300 mm (12”)dia.Make Kriloskar with flanged end As per IS:14846 body ring -Bronze IS: 318 Gr gaskit-natural rubber Flange drilling-IS: 1538 P 1.6

Supply and fix in replacement of cast Iron Air Valves with two air Outlets, 80 mm dia bore and fixing Up in CI/DI water supply mains ,150 mm (12”)dia.

M & L for CI fitting such as bends (any type radius and angle ) tapers any type ( straight, bend, Tee, reducers, socket , collers,caps and plugs ) upto 300mm dia

M & L for cement in foundation filling mass & concrete type D2 (1:4:8) (using 40 mm graded stone aggregate)

M & L for reinforced concrete pipes of 450MM dia, class NP2, laid and jointed with collars and accessories complete all as directed.

S&F in Rolled mild steel in Fe-410-W(Gde-E-250) quality-B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Cutting existing 300 mm dia cast iron pipe in position for insertion of new pipe/tees, branches etc.

All as per Item No.13.00 but size of 250 mm dia

All as per Item No.13.00 but size of 200 mm dia

All as per Item No.13.00 but size of 150 mm dia

All as per Item No.13.00 but size of 100 mm dia

Taking up cast iron water mains incuding flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead of 300 mm dia size.

All as per Item No.18.00 but size of 250 mm dia

All as per Item No.18.00 but size of 200 mm dia

All as per Item No.18.00 but size of 150 mm dia

All as per Item No.18.00 but size of 100 mm dia

All as per Item No.18.00 but size of 80 mm dia

Supply and laying cast iron pipes with spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of size 300 mm dia

All as per Item No.24.00 but size of 250 mm dia

All as per Item No.24.00 but size of 200 mm dia

All as per Item No.24.00 but size of 150 mm dia

All as per Item No.24.00 but size of 100 mm dia

All as per Item No.24.00 but size of 80 mm dia

M&L for 300 mm dia run lead joints complete for water mains with spigot & socket pipes and fittings, all as specified and directed.

All as per Item No.30.00 but size of 250 mm dia

All as per Item No.30.00 but size of 200 mm dia

All as per Item No.30.00 but size of 150 mm dia

All as per Item No.30.00 but size of 100 mm dia

All as per Item No.30.00 but size of 80 mm dia

Supply & fix rubber tyton joint of 300 mm dia size :

All as per Item No.36.00 but size of 250 mm dia

All as per Item No.36.00 but size of 200 mm dia

All as per Item No.36.00 but size of 150 mm dia

All as per Item No.36.00 but size of 100 mm dia

All as per Item No.36.00 but size of 80 mm dia

Supply & fix Tail piece ISI marked for spigot end pipe of 300 mm size.

All as per Item No.42.00 but size of 250 mm

All as per Item No.42.00 but size of 200 mm

All as per Item No.42.00 but size of 150 mm

All as per Item No.42.00 but size of 100 mm

All as per Item No.42.00 but size of 80 mm

Area clearance/levelling/excavation /digging at MES installations at any width and length by using JCB complete all as directed by Engineer-in-Charge. Note 1. The cost of POL includedin quotated rates . 2. After Start and finsh of the work ,Hrs slips shall be provided by the contrcator 3. LOG Sheet shall be maintained.

Repair of mechanically operated water level indicators fitted to OH reservoirs sumps etc including the following (A) Replacement stainless steel float of size 12 dia in to 10 Mtr height approx, 5Kg weight are as required at site with steel pvc wire rope of min size 3 mm dia of suitable length. (B) Repair replacement of Ms single grove pulley along with its bracket by means of fabrication such as welding cutting etc,, and fixing the same all as diredted by engr-in-charge, (C ) Painting and marking the scale with synthetic enamel paint as directed.

Supply only Hawksaw blades heavy duty

Supply only Dustin Cloth (cotton) of size 30x30 cm (as per sample)

Supply only bearing grease Heavy duty and high performance AP-3 in 10 kg container Make- Castrol ,Veedol.

Supply only Pidilite Holdtite plus ptfe tape (12 mm x10 m)

Supply only pidilite holdtite white liquid sealant for GI pipe in 500 gram container

Supply & fix machanical joint / Coller ISI marked for spigot end pipe of following size OF 300 mm with all accessories.

All as per Item No.55.00 but size of 250 mm

All as per Item No.55.00 but size of 200 mm

All as per Item No.55.00 but size of 150 mm

All as per Item No.55.00 but size of 100 mm

All as per Item No.55.00 but size of 80 mm

S & F in replacement multicore ,multistranded flexible cable 1100V PVC insulated & Sheathed with Flalt Submersible cable Bare Annealed Copper Conductor as per IS:694-2010 of size 10 Sqmm 3 core for Pumps complete all as specified and directed

S & F in replacement Mild steel plates chequered, 5mm thick or over in thickness in available sizes or as directed by Engr-in-Charge including painting with Black oil paint over a coat of red oxide complete all as specified and directed

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 1,74,170.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

MAHIMA CONSTRUCTION

sapana enterprises

SONA LAKSHMI ASSOCIATE

SHREE GANESH ENTERPRIESE

ANIKET ENGINEERING

UNITED ENTERPRISES

Bidder Name

sapana enterprises

MAHIMA CONSTRUCTION

UNITED ENTERPRISES

Vinod Enterprises

SHREE GANESH ENTERPRIESE

SONA LAKSHMI ASSOCIATE

ANIKET ENGINEERING