PETTY REPAIRS LIKE REPAIRS TO WATER PIPE LINE, PLASTERING,CHAJJA REPAIRS, AND CONNECTED MISC WORKS IN DOMESTIA AREA AT AF STN YELAHANKA

Amount

Petty repairs low level flushing cisten any size/ description for repair of leaking water by adjusting/ replacing the washer and adjustment of lever require for making the cistern functional complete all as specified and directed by Engr-in-Charge.

Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture , wall mixture, concealed etc of any description any size by changing washer/ jumper valve etc complete all as specified and directed. Note: - Five nos of complaint considered by one unit specified and directed by Engr-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

S&F prepainted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddding to wall, fix with self tapping screws with necessary washers/welding all as specified and directed. (The profile of the sheet as specifed and directed by Engr-in-Charge).

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L Polishing of kotastone ,marble /terrzo floor including material all as specified and directed by engr in charge.

M&L in replacement of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and valve mixture of any description fixed in repairs complete all as specified and directed by Engr-in-Charge.(Suitable for make Jagur,Cera,Sieko and Zollota etc)

Dismantling of old Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work.

S&F of Ceiling Board 12mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions .

S&F aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge.

S&F Soap Dish Holder, in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No ACN-1131N) or its techno commercial equivalent.

S&F Paper holder with Flap Recessed Type (Stainless steel), in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No AQN-7753) or its techno commercial equivalent.

S&F Corner Glass shelf with bracket, in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar (Code No CAN-1173) or its techno commercial equivalent.

S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as directed and specified by Engr in charge.

S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete.

Taking down the existing bottle traps of wash hand basin refixing the same after cleaning including replacement of washers, packing etc if required complete all as specified & directed by Engr-in-charge.

S&F in repair 15 mm dia bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge.. Cera model No F2002161 or its techno commercial equivalent.

S&F in repair bib tap of PTMT any colour 15mm dia (Prayag or equivalent ) in repairs all as specified.

S&F in repair stop valve of PTMT any colour screwed for iron pipe and fixed 15mm bore all as specified.

S&F in repair gun metal globe gate valve 20 mm bore.

S&F in repair Towel Rack with lower hanger (stainless steel), complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H) or its techno commercial equivalent.

S&F brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs complete all as specified and directed by Engr-in-Charge.

M&L in replacement of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified & directed by Engr-in-charge.

S&F in repair 70 mm long fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe with 235 mm long shower arm complete all as specified & directed by Engr-in-Charge

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model F3002152 or its techno commercial equivalent.

S&F Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs. Make - Jaguar, Cat Part No - CON-219KN or its techno commercial equivalent.

S&F in repair 15 mm dia Pillar taps (fancy type), cast copper alloy with capstan heads, chromium plated,handle screwed down high pressure, with or without lettered HOt or cold with long screwed shanks and fly nuts ,screwewd for crewed for iron pipe and fixed complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model 3002101or its techno commercial equivalent.

S&F in repairs Angle cock with wall flange 15 mm dia Fancy type Make:Cera Model No QTF 2006201 or its techno commercial equivalent.

Supply and fix in repairs stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15mm bore dia

All as per Item No 29 here-in-before but concealed type in repairs

S&F in repairs PVC waste pipe 32/40 mm dia for urinal/ WHB/Sink

S&F as in repair 15mm dia PVC connection 600 mm long all as specified.

Removal of air lock/blockage of water in G I Tubing 15,20,25mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-Charge.

S&F in repair Sink with drainage board made of stain less steel 1mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as approved by Engr-in-Charge.

S& F in repairs PVC (SWR) P trap 110/110mm bore, all as specified.

S&F in repairs PVC (SWR) S trap 110/110mm bore, all as specified.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repair PVC(SWR) bends 110mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (75 mm bore) including flat iron claim for proper fixing complete all as specified & directed by Engr-in-charge.

S&F in repair PVC(SWR) bends 75mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms) in repair.

S&Fin repair High density polyethylene pipes 50 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls,floors,ceiling etc.

M&L for 75mm dia of outlet PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed by Engr-in-charge .

S&F in repair for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of brackets including of fixing of 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, PVC connection with 15 mm PTMT cheknuts, brackets all complete as directed by Engr in Charge.

S&F in repairs 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve ,float & handle including brackets complete all as specified and directed by Engr-in-Charge.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type lockable cover complete all as specified and directed by Engr-in-Charge.

S&F in repairs rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed by Engr-in-Charge.

Taking down & Refixing of CP Fittings such as 15 mm dia Angle valve, Bib cock, stop cock complete all as specified and directed by Engr- in - charge.

S&F in repair wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed by Engr-in-Charge.

S&F in repairs plastic EWC seat cover of white colour pedestal pan , closed pattern withg flat bottom & cover including MS chromium plated ,alum hinging devices complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar all as directed.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar all as specified & directed by Engr-in-charge.

M&L for brick work with sub class 'B' (old size) straight of curved on plan to any radius built in half brick wall using CM 1:4 complete all as specified & directed by Engr-in-Charge.

M/L 15 mm thick cement plaster in CM (1:6) including finished even and smooth without using extra lime or cement.

M&L for rendering 10mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on ceiling surfaces .

M&L for applying two coats of distemper (OBD) including preparation to the new surfaces of wall, all as specified and as directed

Taking down and re-fixing of old steel tubing connection in new or old position (wall etc) including cleaning for re-fixing bore of pipe 15mm dia complete all as specified and directed by Engr-in-Charge. Note: - New GI fittings such as elbow, socket, Tee, Union, Nipple are included in rates if required for re-fixing of pipe.

All as per srl item No 61 above 20mm bore of pipe.

S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc for 15mm bore pipe (ISI marked)

All as per srl item No 63 above 20/25mm bore of pipe.

S & F in repair stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 66 above but exceeding 1.5 sqm but not exceeding 4 sqm

Taking down shutters of any description exc 1sqm and n.exc 2sqm each

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

S&F 30 mm thick flush shutter, soild core construction, with particle board core and plywood face panels, (membrane doors of any colour any Code/model name of Maxon doors only)all specified and directed. Make - Maxon Membrane doors MR or its techno commercial equivalent.

S&F second class hard wood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or mitered and rebated sash bars any number, edges or framing, plain chamfered or rounded fitted with beads for securing glass gauge size of members of shutters as specified in SSR part I factory made shutters of 35 mm thick all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with 19mmx19mm MS square tube. EPDM rubber gasket weather seal to be provided throughout the frame. The profile shall be mitre cut at two corners and joined by inserting 2mm of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed. The door frame shall be fixed to the wall using 65x100mm long cdium plated screws through the frame by using PVC fasterness. A minimum of 06 Nos screws to be provided for each frame supplying & fixing in opening as per specified and directed Note : Cuting holes, providing cement concrete for holdfast finishing all disturbed surfaces (CM 1:4) around door frame etc are deamed in this item

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lack rail & bottom rail on either side & as far insert for top rail & bottom rail ; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beating and joined together with solvent cement supplied and fixing in the frame at site including all fixture & fittings etc all as specified and as directed.

S&F in repairs 125 mm Stainless steel hinges of any colour including neccessary equivalent screws all as specified & directed by Engr-in-charge as fixed in repairs.

S&F in repairs 100 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-chargeas fixed in repairs.

S&F in repairs 75 mm Stainless steel hinges of any colour all as specified & directed by Engr-in-chargeas fixed in repairs.

S/F in repairs Stainless steel barrel tower bolt 150mm of extruded sectionas fixed in repairs.

S/F in repairs Stainless steel handle 150mm all as specified and directed by the engineer -in -chargeas fixed in repairs.

S/F in repairs Stainless steel handle 100mm all as specified and directed by the engineer -in -chargeas fixed in repairs.

S&F in repair 150mm floor door stopper of Stainless steel body ,fixed in floor all as specified and directed by Engr-in-Charge.

S&F aluminium annodised section for door/window/ventilator not less than 2mm thick and for fully glazed door with 5.50mm thick tinted/frosted glass with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S&F aluminium annodised door/Windows/ventiliator shutters aluminium section weighing 0.55kg/m including necessary joining, fixed type, cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised alumnium snap beading, screw etc, complete all as spd.

S& F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.

S&F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers.

S&F as in repairs MS Mortise lock, vertical type, size100 mm four lever .

S&F in repairs ISI marked hydraulically regulated door closer designation no.03 universal type,suitable for door shutters of 851 to 1000 mm in width and weight betwwen 61 to 80 kg width upto 1.50 mm mtr and weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge..

S/F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge

Easing of wooden window shutters/CB shutters (One unit shall comprising of one window/ CB/ Showcase/ irrespective of number of leaves) for properly closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc complete all as specified & directed by Engr-in-charge.

All as per srl item No 89 above but door shutter.

M&L for replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrought for glazing or gauged joinery for fixing wire gauge/ securing glass pane complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster in patches on brick work, racking out joints, hacking for key scrubbing down with water etc complete and removing the spoin to a distance of n.exc 100m & depositing where directed all as specified & M&L for 15mm thick cement plaster in CM (1:4) on brick work/concrete surface finished even & smooth w/o using extra cement. the area of patches should not be more than 1.00Sqm.

M&L for 4.00mm thick coloured glass fixed with aluminum beads. The rates includes taking down of old glass from metal frame & refixing the beading, PVC packing complete of any type complete all as specified and directed by Engr-in-Charge.

M&L for repairing of 40mm thick flooring in patches with PCC (1:2:4) 20mm graded stone agg. & finished even & smooth w/o using extra cement. The area of patches should not be more than 2.00 sqm each. The rates include demolition of existing concrete complete all as specified and directed by Engr-in-Charge.

S&F in repair MS 180mm( Powder coated), ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-Charge. Note:- one unit shall be comprising of one window irrespective of no of leaves/shutter work to be carried out up to 12m height.

M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches n exc 1 sqm each & matching with existing tile 200x300x7mm size as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc incl dismantling of skirting/ dado (terrazo/PCC/tiles of any description) incl cement mortar bedding but not backing including dismantling and removing the rubbish from the complex complete all as specified & as directed by Engr-in-Charge.

M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches n exc 1 sqm each & matching with existing tile 350x250x7mm /450x350x7mmsize as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc incl dismantling of skirting/ dado (terrezo/PCC/tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified & as directed by Engr-in-Charge.

M&L for non skid coloured ceramic tiles tiles 400x400x7mm of size in patches n exc 1 sqm each & matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick backing coat in cement mortar in (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) incl cement mortar bedding but not backing) incl dismantling and removing the rubbish from the complex complete all as specified and as directed by Engr-in-charge.

S&F in repair PVC Corner bracket golden colour suitable for drapery rod as per sample complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC knobs golden colour suitable ISI marked as per sample complete all as specified and directed by Engr-in-Charge.

S&F in repair for PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. complete all as specified and directed. The cover to be provided 500/1000 ltrs capacity.

M&L for Running welding in repairs on metal to be welded of thickness exc. 6mm but n.exc. 9mm including preparation of surface, etc complete all as specified and directed by Engr-in-charge.

S&F in repairs steel work as in tubler trusses incl special shaped washer etc complete using ERW orinduction but welded tubes confirming to IS1161-1979 grade St-240. Grade 410-W Gde E-250 Quality.

S&F in repairs Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; etc including dismantling of old sections complete all as specified & directed by Engr-in-charge.

S&F in repairs CP Towel rail of cera make including fiitings of neccessary screws etc complete all as specified and directed by the Engr-in-Charge. Make:Cera Model500103 or its techno commercial equivalent.

S&F in repairs CP Towel ring of cera make including fiitings of neccessary screws etc.complete all as specified and directed by the Engr-in-Charge. Make:Cera Model 500105 or its techno commercial equivalent.

S&F in repairs CP health fauccet of Cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make:Cera Make-8030103 or its techno commercial equivalent.

S&F in repairs Glass shelf of cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make:Cera Model F-5005102 or its techno commercial equivalent.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F CPVC pipes 20 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F in repairs Ball Brass valve 25 mm dia high pressure, with polythene float and flynut complete all as specified and as directed.

ditto all as per item 114 above but 20 mm dia

S&F in repair PVC syphon kit for low level flushing cistern.

S&F PVC Cabinet mirror Make Prayag all as specified directed by engr in charge.

S&Fin repairs Basin mixer 15 mm dia Fancy type. Make:Cera model F-2008461 or its techno commercial equivalent.

S&F in repairs swan neck Pillar cock CP 15 mm dia . Make:Cera F2008105(Right) or its techno commercial equivalent.

S&F in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr .

M & L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg, all as spd & directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough.

M&L for Granite( of any size) work in cooking plate form and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite 20 mm thickness.

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cm 1:6 all as specified and directed.

Easing of aluminium doors including taking out door shutters and changing of certain parts if required like pilots,hinges,rubber beadings etc as required and re-fixing in same position and size of doors n.exc 4 sqm each.

All as per item no 127 but for windows.

S&F Vitreous china urinals : 5001, Flat back large of size 420x395x635mm, White colour, Make - CERA/URS-WHT-0707 of size 530x340x360mm, White Colour, Make- JAGUAR/RIVA: 96003 of size 69x34.50x25cm, Make- HINDWARE (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified.

S&F Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified.

S&F Two piece EWC with cistern, soft close seat cover and twin flushing fittings of size 655 x 400 x 760mm, Ivory colour with all accessories. Make : CERA, Model CALVINA Cat Part No : 2050, 2150, 2350, 2250 or its techno commercial equivalent

S&F in repair Waste coupling of PTMT ( half or full threaded) of 40 mm dia.

Note : FOR SL ITEM NO 1 TO 132 : ( a) The bidder shall note that two plumber and two helpers and one Mason and one helper and two Carpenter and two helper including T&P shall be made available at the office of the AGE B/R-II, yelahanka throughout the contract period against the fixing of elements covered under BOQ. The rate shall be deemed to be included in this provision in the quoted rate and nothing extra shall be entertained by the Govt on this account. (b) Please note that the contract shall run for the period of 11(Eleven) month irrespective of quantities provided in BOQ.

Thirumala Construction