RVI AT NWZ, SWZ AND SZ

Blue Facia — pply, fabrication of blue facia: The width of the bluefacia shall be as per the requirement of the user clauseno.1.1.6of general ins uctions for canopy signage. The ACMto be cladded on supporting frame. The rates quoted byvendor shall be inclusive of fabrication , ansportation,supply and installation of the subject item at site .

Corner Facia 3.9 M — pply & fabrication of corner facia:3.9 m long silvercorner facia + 560 mm form PET G The length of the cornerfacia includes silver f ia plus PET G material ( spine)portion as indicated in the clause no.1.1.6 of generalinstructions for canopy signage. The width / le th ofthe corner facia and form PET G (spine ) dimension will beguided by the clause no.1.1.6 of general instructions forcanopy signa . The ACM to be cladded on supporting MSframework. The fabrication of the supporting frame,cladding of silver facia in ACM material d forming of PETG material shall be made as per the drawing given in thetender. The drawing enclosed in the tender are indicative. T detailed fabrication and shop floor drawings shall bedeveloped by the vendor and submitted to HPCL for approval. Approval for fixin of canopy structure should be obtainedprior to execution of the job. Peel - off protective filmof ACM to be removed at site after fi l inspection. Rateto include supply, installation, testing, commissioning ofLED lighting along with suitable power drivers incl.cabl g( Detailed data sheet & typical arrangement is enclosed.However, the vendor shall submit the design document of LEDmodule arrangeme based on the data sheet for eachelement& approval of the same by HPCL site in charge). ThePET G spine shall be pasted with Vinyl in pproved colour.Mode of measurement : The measurement for corner facia willbe in number and measured length as given below should bef m the corner of the facia upto outer point of form PET Gspine ( taken vertical). Rate to also include fabricationof MS supporting fr e works, PET -G, Vinyl Reflector, 1mmAl sheet at top, 1 mm GI sheet for flashing .All work to bedone in line, level and plumb.( For 0 or 900 mm width ofCorner facia) The rates quoted by vendor shall beinclusive of fabrication , transportation, supply andinstallati of the subject item at site .

Corner Facia 3.5 M — pply & fabrication of corner facia:3.5 m long silvercorner facia + 500 mm form PET G The length of the cornerfacia includes silver f ia plus PET G material ( spine)portion as indicated in the clause no.1.1.6 of generalinstructions for canopy signage. The width / le th ofthe corner facia and form PET G (spine ) dimension will beguided by the clause no.1.1.6 of general instructions forcanopy signa . The ACM to be cladded on supporting MSframework. The fabrication of the supporting frame,cladding of silver facia in ACM material d forming of PETG material shall be made as per the drawing given in thetender. The drawing enclosed in the tender are indicative. T detailed fabrication and shop floor drawings shall bedeveloped by the vendor and submitted to HPCL for approval. Approval for fixin of canopy structure should be obtainedprior to execution of the job. Peel - off protective filmof ACM to be removed at site after fi l inspection. Rateto include supply, installation, testing, commissioning ofLED lighting along with suitable power drivers incl.cabl g( Detailed data sheet & typical arrangement is enclosed.However, the vendor shall submit the design document of LEDmodule arrangeme based on the data sheet for eachelement& approval of the same by HPCL site in charge). ThePET G spine shall be pasted with Vinyl in pproved colour.Mode of measurement : The measurement for corner facia willbe in number and measured length as given below should bef m the corner of the facia upto outer point of form PET Gspine ( taken vertical). Rate to also include fabricationof MS supporting fr e works, PET -G, Vinyl Reflector, 1mmAl sheet at top, 1 mm GI sheet for flashing .All work to bedone in line, level and plumb.( For 0 or 900 mm width ofCorner facia) The rates quoted by vendor shall beinclusive of fabrication , transportation, supply andinstallati of the subject item at site .

Corner Facia 3.0 M — pply & fabrication of corner facia:3 m long silver cornerfacia + 500 mm form PET G The length of the corner faciaincludes silver fac plus PET G material ( spine) portionas indicated in the clause no.1.1.6 of general instructionsfor canopy signage. The width / leng of the cornerfacia and form PET G (spine ) dimension will be guided bythe clause no.1.1.6 of general instructions for canopysignage The ACM to be cladded on supporting MS framework.The fabrication of the supporting frame, cladding of silverfacia in ACM material an forming of PET G material shallbe made as per the drawing given in the tender. Thedrawing enclosed in the tender are indicative. The tailed fabrication and shop floor drawings shall bedeveloped by the vendor and submitted to HPCL for approval. Approval for fixing o canopy structure should be obtainedprior to execution of the job. Peel - off protective filmof ACM to be removed at site after final nspection. Rateto include supply, installation, testing, commissioning ofLED lighting along with suitable power drivers incl.cabling Detailed data sheet & typical arrangement is enclosed.However, the vendor shall submit the design document of LEDmodule arrangement sed on the data sheet for eachelement& approval of the same by HPCL site in charge). ThePET G spine shall be pasted with Vinyl in ap oved colour.Mode of measurement : The measurement for corner facia willbe in number and measured length as given below should befrom he corner of the facia upto outer point of form PET Gspine ( taken vertical). Rate to also include fabricationof MS supporting frame orks, PET -G, Vinyl Reflector, 1mmAl sheet at top, 1 mm GI sheet for flashing .All work to bedone in line, level and plumb.( For 800 r 900 mm width ofCorner facia) The rates quoted by vendor shall beinclusive of fabrication , transportation, supply andinstallation the subject item at site .

Corner Facia 2.5 M — pply & fabrication of corner facia:2.5 m long silvercorner facia + 500 mm form PET G The length of the cornerfacia includes silver f ia plus PET G material ( spine)portion as indicated in the clause no.1.1.6 of generalinstructions for canopy signage. The width / le th ofthe corner facia and form PET G (spine ) dimension will beguided by the clause no.1.1.6 of general instructions forcanopy signa . The ACM to be cladded on supporting MSframework. The fabrication of the supporting frame,cladding of silver facia in ACM material d forming of PETG material shall be made as per the drawing given in thetender. The drawing enclosed in the tender are indicative. T detailed fabrication and shop floor drawings shall bedeveloped by the vendor and submitted to HPCL for approval. Approval for fixin of canopy structure should be obtainedprior to execution of the job. Peel - off protective filmof ACM to be removed at site after fi l inspection. Rateto include supply, installation, testing, commissioning ofLED lighting along with suitable power drivers incl.cabl g( Detailed data sheet & typical arrangement is enclosed.However, the vendor shall submit the design document of LEDmodule arrangeme based on the data sheet for eachelement& approval of the same by HPCL site in charge). ThePET G spine shall be pasted with Vinyl in pproved colour.Mode of measurement : The measurement for corner facia willbe in number and measured length as given below should bef m the corner of the facia upto outer point of form PET Gspine ( taken vertical). Rate to also include fabricationof MS supporting fr e works, PET -G, Vinyl Reflector, 1mmAl sheet at top, 1 mm GI sheet for flashing .All work to bedone in line, level and plumb.( For 0 or 900 mm width ofCorner facia) The rates quoted by vendor shall beinclusive of fabrication , transportation, supply andinstallati of the subject item at site .

HP Logo 1 M dia — pply & fabrication of HP logo (size 1.0 m) The size ofthe logo shall be as per the requirement of canopy signage. The fabrication of he supporting frame, cladding ofsilver facia in ACM material and forming of PET G materialshall be made as per the drawing given in e tender. Thedrawing enclosed in the tender are indicative. Thedetailed fabrication and shop floor drawings shall bedeveloped by the endor and submitted to HPCL for approval. Approval for fixing of canopy structure should be obtainedprior to execution of the job. P l - off protective filmof ACM to be removed at site after final inspection. Rateto include supply, installation, testing, commission g ofLED lighting along with suitable power drivers incl.cabling( Detailed data sheet & typical arrangement is enclosed.However, the ndor shall submit the design document of LEDmodule arrangement based on the data sheet for eachelement& approval of the same by HPCL ite in charge) MSsupport frame, PET G , Vinyl . All work to be done in theline , level & plumb. Mode of measurement : The measuremen or HP logo will be in number as per the drawing. The ratesquoted by vendor shall be inclusive of fabrication ,transportation, supply nd installation of the subject itemat site .

HP Logo 1.16 M dia — pply & fabrication of HP logo (size 1.16 m) : The size ofthe logo shall be as per the requirement of canopy signage. The fabrication f the supporting frame, cladding ofsilver facia in ACM material and forming of PET G materialshall be made as per the drawing given the tender. Thedrawing enclosed in the tender are indicative. Thedetailed fabrication and shop floor drawings shall bedeveloped by e vendor and submitted to HPCL for approval. Approval for fixing of canopy structure should be obtainedprior to execution of the job Peel - off protective filmof ACM to be removed at site after final inspection. Rateto include supply, installation, testing, commiss ning ofLED lighting along with suitable power drivers incl.cabling( Detailed data sheet & typical arrangement is enclosed.However, t vendor shall submit the design document of LEDmodule arrangement based on the data sheet for eachelement& approval of the same by H L site in charge) MSsupport frame, PET G , Vinyl . All work to be done in theline , level & plumb. Mode of measurement : The measure ntfor HP logo will be in number as per the drawing. The ratesquoted by vendor shall be inclusive of fabrication ,transportation, sup y and installation of the subject itemat site .

White Facia — pply & fabrication of white facia : The width of thewhite facia shall be as per the drawing. The ACM to becladded on supporting MS f mework. The fabrication of thesupporting frame, cladding of white facia in ACM materialshall be made as per the drawing given in the ender. Thedrawing enclosed in the tender are indicative. Thedetailed fabrication and shop floor drawings shall bedeveloped by the ve or and submitted to HPCL for approval. Approval for fixing of canopy structure should be obtainedprior to execution of the job. Peel off protective filmof ACM to be removed at site after final inspection. Allwork to be done in line, level and plumb. Mode ofmeasure nt : The measurement for white facia will be inrunning metre of the facia measured between top edge of theinstalled facia . Rate for upporting frame ,flashing atthe rear side and bottom side shall be included in therate. Supply & fabrication of white facia. The rat quotedby vendor shall be inclusive of fabrication ,transportation, supply and installation of the subject itemat site .

Sales Bldg Facia — pply & fabrication of facia for sales building : Thewidth of the facia for the building shall be as per thedrawing. The ACM to be cl ded on supporting MS framework.The fabrication of the supporting frame, cladding ofbuilding facia in ACM material shall be made as p thedrawing given in the tender. The drawing enclosed in thetender are indicative. The detailed fabrication and shopfloor drawings s ll be developed by the vendor andsubmitted to HPCL for approval. Approval for fixing ofcanopy structure should be obtained prior to ecution ofthe job. Lettering for facilities to be provided inAcrylic ( pasted with vinyl ) on building facia as perapproval by HPCL e. Sales Building , ATM, Lube Express ,Club Bites etc. Peel - off protective film of ACM to beremoved at site after final inspection All work to bedone in line, level and plumb. Mode of measurement : Themeasurement for building facia will be in running metre ofthe cia measured between top edge of the installed faciafront face. Rate for supporting frame, flashing at the rearside shall be include in the rate.The rates quoted byvendor shall be inclusive of fabrication , transportation,supply and installation of the subject item t site .

ACM — pply & fabrication of Aluminium composite panel ( in anyapproved color ) cladding to cover additional area atoutlet including suppor framing of required size. Modeof measurement: The measurement shall be in area ( L x B ,SQM ) of ACM sheet installed at site. No was ge shall bepaid extra. The rates quoted by vendor shall be inclusiveof fabrication , transportation, supply and installation ofthe s ject item at site