Construction of District Institute of Education and Training (DIET) of Excellence Kulgam

Additional Rooms for Administrative Block

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing,Laying, spreading and compacting RBM of specified sizes in uniform thickness, Ramming/compacting watering and Including all carriages and lifts upto the site of work complete job

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Stairs (excluding landings) except spiral staircases.

Suspended floors, roofs, landings, balconies and access platforms

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported wood (30mm Thickness of Shutter)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported (30mm Thickness of Shutter)

Providing and fixing 3.5 mm thick glass pane with neceassary beading all complete

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. ( 30 mm Imported Wood).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Imported Wood

Providing 40x5mm flat Iron hold fast 50 Cm long incld: fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement conc: block 30x10x15Cm 1:3:6 mix 1 Cement:3 coarse sand 6 graded stone agg: 20mm Nom: size) etc complete. Incld: all carriages complete

Providing and fixing of Hardware fittings (Allys) as per approved samples

100mm Handles

150mm Handles

100mm Tower Bolts

150mm Tower bolts

Stay Hooks

L-Drop 8 Inch with link lock

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing colour coated corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing of galvanised iron eves boarding of G.I Sheets incld.All necessary frame work complete ( including all carraiges)

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.1.25 mm thick with zinc coating not less than 350 gram/m2

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete1 mm thick

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: lead of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Sanitary Fiitiings

Providing and fixing 3 layer PPR (Poly Propylene Random Coplymer) pipes conforming to IS 15801, UV stablized and anti - microbial fusion welded having thermal stability for hot and cold water supply including PPR plain and brass threaded polyproplene random fittings. This includes testing of joints complete as per directions of Engineer Incharge. Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the walls.

25 mm OD (SDR-7.4) Internal

40mm OD (SDR-7.4)

50mm OD (SDR -7.4)

External work including trenhing , refilling etc Main supply line

63mm OD (SDR- 7.40)

PPR Union 25mm

PPR Union 40mm

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw End)

65mm nominal bore

Providing and fixing ball valve PPR of approve quality complete

25mm Dia OD

40mm Dia

50mm Dia

Providing/fixing and placing on terrace (at all floor levels) polythylene water storagre tank of approved quality or equivalent tripple layer incld: making necessary holes inlet, outlet overflow making proproper plateform incld: all carraiges complete

Providing and fixing C.P Brass extension nipple (size 15mmx50mm) of approved make and qaulity as per directions of Engineer Incharge

Providing and fixing PTMT ball clock of approved qaulity , colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls , 25mm nominal bore, 152mm long , weighing not less than 440gms

Providing and fixing 15mm nominal bore C.P brass bib cock of approved quality conforming to IS 8931

Providing and fixing 15mm nominal bore C.P angle valve for basin mixer and geyser points of approved quality conforming to IS 8931

Providing and fixing 15mm nominal bore of standard back type C.P brass close hole basin mixer pillar tap of approve qaility and make weighing not less than 1.970 Kg

P/F of C.P brass SINGLE lever wall mixer with concealed shower of approved qaulity and make as approved by Engineer Incharge 15mm dia

Providing and fixing whilte vitreous china water closet (European type W.C Pan) with seat and lid , 10 litre low level white PVC flushing cistern including flush pipe with manually controled device (Handle lever) conforming to IS 7231 , with all fittings and fixtures complete including cutting and making good the walls and floor wherever required pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china wash basin with C.I brackets, single hole basin mixer 32mm CP Brass waste of standard pattern incld: painting of fitting and brackets, cutting and making good the walls whereever required , wash basin 550x400 mm with a pair of 15mm CP brass taps

P/F of PVC Waste 32mm

P/F 8mm dia C.P/S.S Jet with flexible tuble up to 1 Mtr long with S.S Trangular plate to European type W.C of approved quality and make

P/F 600x450mm levelled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground glass to wodden cleats with C.P brass screws and washers complete

P/F of Toilet paper holder (CP)

P/F in position PVC P Or S traps

P/F in position PVC floor trap 100mm dia

P/F soil waste and vent pipe 1mm thick

PVC PVC S&S Pipe (150mm Dia)

PVC PVC S&S Pipe (100mm Dia)

PVC PVC S&S Pipe (75mm Dia)

PVC PVC S&S Pipe (50mm Dia)

PVC Cowell 50mm dia

P/F of PVC stay and clamps for PVC Pipes 100mm

P/F of PVC stay and clamps for PVC Pipes 75mm

P/F of bend of required degree with door inspection rubber washer 3mm thick bolts and nuts complete . PVC S&S Pipes (100mm)

P/F of bend of required degree with door inspection rubber washer 3mm thick bolts and nuts complete . PVC S&S Pipes (75mm)

P/F of Plain bend (100mm)

P/F of Plain bend (75mm)

Providing and filling the joints with spun yarn cemnet slurry and cement mortar 1 : 2 Mix (100mm)

Providing and filling the joints with spun yarn cemnet slurry and cement mortar 1 : 2 Mix (75mm)

P/F Tee - Junction of required degree with access door , inserted rubber washer 3mm thick bolts and nutscomplete 100x100x100 PVC 1mm ( 100mm )

P/F Tee - Junction of required degree with access door , inserted rubber washer 3mm thick bolts and nutscomplete 100x100x100 PVC 1mm ( 75mm )

P/F of PVC Reducer 100- 50mm Dia

Providing and fixing liquid PTMT soap container 109mm wide 125mm high and of approved quality weighing not less than 105 gms

P/F PTMT towel rail with brackets fixed to wooden cleats with CP brass with concealed fitting arrangement of approved qaulity (600mm long toatl length 645mm, 78mm wide and effective hight 8mm weghining not less than 190gms

CP/F of CP Grattings 100mm dia and 75mm

P/F of PVC Connections 15mm

Construction of brick masonary inspection chambers/manholes brick work 9" thick in cement mortar 1 : 4 incld: earth work , preparing base , laying foundation concrete 1 : 4 : 8 mix, plaster 1 : 4 mix incld: finishing , laying cement conc: floring 1 : 2: 4 (1 Cement : 2 coaese sand : 4 grade stone) with finishing , making proper channels incld: RCC slab 1 :2: 4 with G.I manhole cover of size 18"x18" of cost iron with gangle frame of approved make incld:all carraiges complete

P/F Master Trap

Providing and fixing 2 HP C.O Motor incuding all fittings 2 No. ball valve , non return valve vertical /horizontal shelter base electric panel awitch board with DP MCB 20 Amph

Providing and fixing of Gesers (Venus, Racold or equliavent brand isi marked ) incld: all necessary fitings complete job 50 Litre for Wash room

Sokage & Septic

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand and 3 stone aggL)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate. sqm

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form work

Suspended floors, roofs, landings, balconies and access platforms

Dry random rubble masonry with hard stone in foundation and plinth: with Bond stone incld: all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Provision for supply and laying of manhole cover heavy duty cost iron of size 18"x18" with angle iron frame

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

30- Bedded Boys _Hostel & 30-Beddede Girls Hostel incld: civil and sanitary

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Supply and filling of RBM conforming to specifications, carriage of material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness not exceeding more than 200mm and compacting to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and Reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.All works above plinth level

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls Under 20 cm wide

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts

Stairs (excluding landings) except spiral staircases

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported wood (30mm Thickness of Shutter)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported (30mm Thickness of Shutter)

Providing and fixing 3.5 mm thick glass pane with neceassary beading all complete

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. ( 30 mm Imported Wood).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Imported Wood

Providing 40x5mm flat Iron hold fast 50 Cm long incld: fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement conc: block 30x10x15Cm 1:3:6 mix 1 Cement:3 coarse sand 6 graded stone agg: 20mm Nom: size) etc complete. Incld: all carriages complete

Providing and fixing of Hardware fittings (Allys) as per approved samples

100mm Handles

150mm Handles

100mm Tower Bolts

150mm Tower bolts

Stay Hooks

L-Drop 8 Inch with link lock

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing corrugated colour coated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.

P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and putup in position in budloo wood (Ceiling Joists). including cost of necessary adhesive & cost of nails etc. with necessary cornice of required size complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete).Soffits

Providing and fixing plained eaves boarding.300x40 mm (nominal size) 2nd class kail wood

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete1 mm thick

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: lead of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Sanitay

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing health faucet with concealed fitting arrangement of approved quality and make.

Providing & Fixing CP brass Short body bib cock including, necessary flange, cutting and making good he walls / floors wherever required complete.

Providing & Fixing CP brass long body bib cock including, necessary flange, cutting and making good he walls / floors wherever required complete.

Providing & Fixing CP brass coat hooks (double) of approved make. Including providing & fixing C.P brass screws, washers, rawal plug etc.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing & Fixing Wall Mounted C.P. Brass Sink Mixer single hole tap with swinging costed spout of required size including cuttinig and making good the wall wherever required.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT grating of approved quality and colour150 mm nominal size square 100 mm diameter of the inner hinged round grating.

Providing and fixing Floor Traps including all fittings required complete job 100m dia

Providing and fixing Floor Traps including all fittings required complete job 75 mm dia

Providing, Fixing, Testing & Commissioning uPVC SWR pipes (Type-B) for soil, waste, and vent conforming to IS 13592 along with all required fittings like tees, bends, cowls, crosses with or without access doors jointed with approved solvent cement fixed to walls and ceilings including angle supports with clamps complete including cutting holes in R.C.C/brick work (slab/beam/wall) and making good the floors, beams and walls with cement mortar where required complete of outer diameter.(Soil/ Waste pipe)

50 mm dia.

75 mm dia.

110 mm dia.

160 mm dia.

Providing and laying cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate, 20 mm down gauge) 75 mm in bed and all around CI/SWR soil & waste pipes under floor, including shuttering etc. complete as required in all respects.

110 mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

PN-16 pipe , 16mm OD(SDR-7.4)

PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. 19.2.1 External work including trenching, refilling etc.

PN-16 pipe, 40mm OD (SDR-7.4)

PN-10 pipe , 50mm OD (SDR-11)

PN-10 pipe , 63mm OD (SDR-11)

Providing, fixing, testing & commissioning of forged brass nickle plated lever operated ball valve of full bore with forged brass hard chrome plated ball with min. working pressure of 10 Kg/cm2 Hydraulic test pressure at seat & shell shall be 16 Kg/cm2 . Lever should be anti rust coating, complete in all respects (For Domestic CWS/FWS Application).

15 mm dia

25 mm dia

32 mm dia

40 mm dia

50MM dia

Providing and fixing PPR Unions

PPR Union 25mm

PPR Union 32mm

PPR Union 40mm

PPR Union 50mm

PPR Union 63mm

Providing and fixing 8mm dia jet with flexible tube upto 1 m long

Supply installation testing and commissioning of 2 HP water pump for lifting of water of approved brand and manufacture as per direction of EIC

Supply installation testing and commissioning of water heaters (Gysers) 50 litre capacity ISI marked of approved brand and manufacture as per direction of EIC

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

P/F PVC reducer 100-40mm dia

Construction of brick masonry inspection Chamber (600x600)mm inside depth upto 600mm in brick work in cement mortar 1:4 mix RCC top slab with 1:2:4 mix foundation concrete in 1:4:8 mix, inside plastering 12mm thick in cement mortar 1:3 mix with flitting coat of neat cement and marking channels complete including cost of manhole frame and Cover of required size of standard quality and carriage of all materials involved complete

Construction of brick masonry inspection Chamber (300x300)mm inside depth upto 600mm in brick work in cement mortar 1:4 mix RCC top slab with 1:2:4 mix foundation concrete in 1:4:8 mix, inside plastering 12mm thick in cement mortar 1:3 mix with flitting coat of neat cement and marking channels complete including cost of manhole frame and Cover of required size of standard quality and carriage of all materials involved complete

Sokage and Septic

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand 3 Stone agg)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form work

Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls

Dry random rubble masonry with hard stone in foundation and plinth: with Bond stone incld: all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Provision for supply and laying of manhole cover heavy duty cost iron of size 18"x18" with angle iron frame

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: lead of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Development of Site/Lawn

Development of site by way of levelling of ground,surfacce dressing,removing the unwanted shrubs, devlopment of lawn etc i/c all complete.

Internal Roads

Supplying & Stacking RBM (River Bed Material ) copnsisting of naturally occuring sand moorum gravel and stone aggregate and combination there of with max.size of particle 100 mm depending upon grading limits incl.sorting,spreading &consolidation with PRR 8- 10 Tonne capacity roller incl.all carriages complete job.

Providing /laying spreading and compacting stone aggregate of specific sizes (63-45mm)to water bound macadam specifications including spreading in uniform thickness hand packing rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber,applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required

02 No- Male /Female Toilet Points

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing,Laying, spreading and compacting RBM of specified sizes in uniform thickness, Ramming/compacting watering and Including all carriages and lifts upto the site of work complete job

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Stairs (excluding landings) except spiral staircases.

Suspended floors, roofs, landings, balconies and access platforms

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported wood (30mm Thickness of Shutter)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported (30mm Thickness of Shutter)

Providing and fixing 3.5 mm thick glass pane with neceassary beading all complete

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. ( 30 mm Imported Wood).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Imported Wood

Providing 40x5mm flat Iron hold fast 50 Cm long incld: fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement conc: block 30x10x15Cm 1:3:6 mix 1 Cement:3 coarse sand 6 graded stone agg: 20mm Nom: size) etc complete. Incld: all carriages complete

Hardware fittings

100mm Handles

150mm Handles

100mm Tower Bolts

150mm Tower bolts

Stay Hooks

L-Drop 8 Inch with link lock

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing of galvanised iron eves boarding of G.I Sheets incld.All necessary frame work complete ( including all carraiges)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Providing and fixing 3 layer PPR (Poly Propylene Random Coplymer) pipes conforming to IS 15801, UV stablized and anti - microbial fusion welded having thermal stability for hot and cold water supply including PPR plain and brass threaded polyproplene random fittings. This includes testing of joints complete as per directions of Engineer Incharge. Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the walls.

16 mm OD (SDR-7.4) Internal

20mm OD (SDR-7.4)

25mm OD (SDR -7.4)

Providing and fixing 3 layer PPR (Poly Propylene Random Coplymer) pipes conforming to IS 15801, UV stablized and anti - microbial fusion welded having thermal stability for hot and cold water supply including PPR plain and brass threaded polyproplene random fittings. This includes testing of joints complete as per directions of Engineer Incharge. Enternal work including Trenching , refilling etc.

PN10 mm 50 OD (SDR-)

Providing and Fixing PPR Unions

PPR Unions 20mm

PPR Union 25mm

PPR Union 50mm

Providing and fixing polyvinl chloride type B (PVC) Including all PVC Plain fittings . This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per directions of Engineer in charge . External Work including trenching refilling etc . for washrooms

75mm nominal outer dia pipes

100mm nominaal outer dia pipes

Providing and fixing POLyvinl chloride (PVC) Type B Door tees /

75mm nominal outer Dia pipes

100mm nominal outer Dia pipes

Providing and fixing POLyvinl chloride (PVC) Type B / floor trapes

100mm nominal outer Dia pipes

Providing and fixing POLyvinl chloride (PVC) Type B Slotted Cowl

75mm nominal outer Dia pipes

Providing and fixing15mm nominal bore C.P brass long nose bib Cock of approved quality conforming to IS Standards and Weighing not less than 810 grm.

Providing and fixing15mm nominal bore C.P brass angle valve for basin basin mixer and geyserpoints of approved make conforming to IS 8931:

Providing and fixing15mm nominal bore C.Pstop cock ( concealed ) of standard desing and of approved make conforming to is ( 8391)

providing and fixing PTMT grating of approved quality and colour circular type 100mm dia

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fitting flat back wash basin of size 630x540 mm

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing of superior glass ( of approved quality ) and of required shape and size with palstic mpulded frame of aaroxed make and shade with 6mm thick hard board backing rectangular shape 453x356mm

providing and fixing PTMP towel rail complete with brackets fixed to wwooden cleats with C.P brass screws concealed fitting arraggements of approved quality and colour 450mm long towel tail with total length of 495mm 78mm wide and effective height of 88mm weighting not less than 170 grams

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: lead of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Sokage-Septic

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 stone agg:)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns etc.

Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls

Dry random rubble masonry with hard stone in foundation and plinth: with Bond stone incld: all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Provision for supply and laying of manhole cover heavy duty

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Constr-CWSN Toilt

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing,Laying, spreading and compacting RBM of specified sizes in uniform thickness, Ramming/compacting watering and Including all carriages and lifts upto the site of work complete job

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Stairs (excluding landings) except spiral staircases.

Suspended floors, roofs, landings, balconies and access platforms

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported wood (30mm Thickness of Shutter)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported (30mm Thickness of Shutter)

Providing and fixing 3.5 mm thick glass pane with neceassary beading all complete

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. ( 30 mm Imported Wood).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Imported Wood

Providing 40x5mm flat Iron hold fast 50 Cm long incld: fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement conc: block 30x10x15Cm 1:3:6 mix 1 Cement:3 coarse sand 6 graded stone agg: 20mm Nom: size) etc complete. Incld: all carriages complete

Providing and fixing of Hardware fittings (Allys) as per approved samples

100mm Handles

150mm Handles

100mm Tower Bolts

150mm Tower bolts

Stay Hooks

L-Drop 8 Inch with link lock

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Providing and fixing 3 layer PPR (Poly Propylene Random Coplymer) pipes conforming to IS 15801, UV stablized and anti - microbial fusion welded having thermal stability for hot and cold water supply including PPR plain and brass threaded polyproplene random fittings. This includes testing of joints complete as per directions of Engineer Incharge. Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the walls.

16 mm OD (SDR-7.4) Internal

20mm OD (SDR-7.4)

25mm OD (SDR -7.4)

Providing and Fixing PPR Unions

PPR Unions 20mm

PPR Union 25mm

PPR Union 50mm

Providing and fixing polyvinl chloride (PVC) Including all PVC Plain fittings . This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per directions of Engineer in charge . External Work including trenching refilling etc . for washrooms

75mm nominaal outer dia pipes

100mm nominaal outer dia pipes

Providing and fixing POLyvinl chloride (PVC) Type B Door tees / doors Bends

75mm nominal outer Dia pipes

Providing and fixing POLyvinl chloride (PVC) Type B / floor trapes

75mm nominal outer Dia pipes

Providing and fixing POLyvinl chloride (PVC) Type B Slotted Cowl

75mm nominal outer Dia pipes

Providing and fixing15mm nominal bore C.P brass long nose bib Cock of approved quality conforming to IS Standards and Weighing not less than 810 grm.

Providing and fixing15mm nominal bore C.P brass angle valve for basin basin mixer and geyserpoints of approved make conforming to IS 8931:

Providing and fixing15mm nominal bore C.Pstop cock ( concealed ) of standard desing and of approved make conforming to is ( 8391)

providing and fixing PTMT grating of approved quality and colour circular type 100mm dia

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Sokage-Septic

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying stone Soling including Carriage upto the site of work

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 Stone agg:

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form work

Suspended floors, roofs, landings, balconies and access platforms

Dry random rubble masonry with hard stone in foundation and plinth: with Bond stone incld: all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Provision for supply and laying of manhole cover heavy duty cost iron of size 18"x18" with angle iron frame

Ramp for CSWN

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Ordinary cement without any pigment

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Hand Wash points

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Part-B: Sanitary Work

Providing and fixing 3 layer PPR (Poly Propylene Random Coplymer) pipes conforming to IS 15801, UV stablized and anti - microbial fusion welded having thermal stability for hot and cold water supply including PPR plain and brass threaded polyproplene random fittings. This includes testing of joints complete as per directions of Engineer Incharge. Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the walls.

20 mm OD (SDR-7.4) Internal

Providing and Fixing PPR Unions

PPR Unions 20mm

Providing and fixing polyvinl chloride (PVC) type BIncluding all PVC Plain fittings . This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per directions of Engineer in charge . External Work including trenching refilling etc . for washrooms

75mm nominaal outer dia pipes

Providing and fixing POLyvinl chloride (PVC) Type B Door tees / doors Bends

75mm nominal outer Dia pipes

Providing and fixing15mm nominal bore C.P brass long nose bib Cock of approved quality conforming to IS Standards and Weighing not less than 810 grm.

Providing and fixing15mm nominal bore C.Pstop cock ( concealed ) of standard desing and of approved make conforming to is ( 8391)

providing and fixing PTMT grating of approved quality and colour circular type 100mm dia

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Sokage-Septic

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 stone agg:)

Centering and shuttering including strutting, propping etc. and removal of form work

Suspended floors, roofs, landings, balconies and access platforms

Edges of slab

Dry random rubble masonry with hard stone in foundation and plinth: with Bond stone incld: all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Provision for supply and laying of manhole cover heavy duty of cost ion 18"x18" size of angle iron frame

G+1 Quarter (Single Unit) and Single Unit G+1 Family Quarter incld: Civil and sanitary

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of Soils

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing,Laying, spreading and compacting RBM of specified sizes in uniform thickness, Ramming/compacting watering and Including all carriages and lifts upto the site of work complete job

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, hand picking, rolling watering and compactingIncluding all carriagesat an average lead of 10 kms and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Stairs (excluding landings) except spiral staircases.

Suspended floors, roofs, landings, balconies and access platforms

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported wood (30mm Thickness of Shutter)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Imported (30mm Thickness of Shutter)

Providing and fixing 3.5 mm thick glass pane with neceassary beading all complete

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. ( 30 mm Imported Wood).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Imported Wood

Providing 40x5mm flat Iron hold fast 50 Cm long incld: fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement conc: block 30x10x15Cm 1:3:6 mix 1 Cement:3 coarse sand 6 graded stone agg: 20mm Nom: size) etc complete. Incld: all carriages complete

Providing and fixing of Hardware fittings (Allys) as per approved samples

100mm Handles

150mm Handles

100mm Tower Bolts

150mm Tower bolts

Stay Hooks

L-Drop 8 Inch with link lock

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing fixing colour cvoat High Rib G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing of galvanised iron eves boarding of G.I Sheets incld.All necessary frame work complete ( including all carraiges)

Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete1.00 mm thick with zinc coating not less than 275 gram/m2

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Part-B: Sanitary Work

Providing and fixing 3 layer PPR (Poly Propylene Random Coplymer) pipes conforming to IS 15801, UV stablized and anti - microbial fusion welded having thermal stability for hot and cold water supply including PPR plain and brass threaded polyproplene random fittings. This includes testing of joints complete as per directions of Engineer Incharge. Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the walls.

25 mm OD (SDR-7.4) Internal

40mm OD (SDR-7.4)

50mm OD (SDR -7.4)

External work including trenhing , refilling etc Main supply line

63mm OD (SDR- 7.40)

PPR Union 25mm

PPR Union 40mm

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw End)

65mm nominal bore

Providing and fixing ball valve PPR of approve quality complete

25mm Dia OD

40mm Dia

50mm Dia

Providing/fixing and placing on terrace (at all floor levels) polythylene water storagre tank of approved quality or equivalent tripple layer incld: making necessary holes inlet, outlet overflow making proproper plateform incld: all carraiges complete

Providing and fixing C.P Brass extension nipple (size 15mmx50mm) of approved make and qaulity as per directions of Engineer Incharge

Providing and fixing PTMT ball clock of approved qaulity , colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls , 25mm nominal bore, 152mm long , weighing not less than 440gms

Providing and fixing 15mm nominal bore C.P brass bib cock of approved quality conforming to IS 8931

Providing and fixing 15mm nominal bore C.P angle valve for basin mixer and geyser points of approved quality conforming to IS 8931

Providing and fixing 15mm nominal bore of standard back type C.P brass close hole basin mixer pillar tap of approve qaility and make weighing not less than 1.970 Kg

P/F of C.P brass SINGLE lever wall mixer with concealed shower of approved qaulity and make as approved by Engineer Incharge 15mm dia

Providing and fixing whilte vitreous china water closet (European type W.C Pan) with seat and lid , 10 litre low level white PVC flushing cistern including flush pipe with manually controled device (Handle lever) conforming to IS 7231 , with all fittings and fixtures complete including cutting and making good the walls and floor wherever required pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china wash basin with C.I brackets, single hole basin mixer 32mm CP Brass waste of standard pattern incld: painting of fitting and brackets, cutting and making good the walls whereever required , wash basin 550x400 mm with a pair of 15mm CP brass taps

P/F of PVC Waste 32mm

P/F 8mm dia C.P/S.S Jet with flexible tuble up to 1 Mtr long with S.S Trangular plate to European type W.C of approved quality and make

P/F 600x450mm levelled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground glass to wodden cleats with C.P brass screws and washers complete

P/F of Toilet paper holder (CP)

P/F in position PVC P Or S traps

P/F in position PVC floor trap 100mm dia

P/F of Soil Waste and vent pipe 1mm thick

PVC PVC S&S Pipe (150mm Dia)

PVC PVC S&S Pipe (100mm Dia)

PVC PVC S&S Pipe (75mm Dia)

PVC PVC S&S Pipe (50mm Dia)

PVC Cowell 50mm dia

P/F of PVC stay and clamps for PVC Pipes 100mm

P/F of PVC stay and clamps for PVC Pipes 75mm

P/F of bend of required degree with door inspection rubber washer 3mm thick bolts and nuts complete . PVC S&S Pipes (100mm)

P/F of bend of required degree with door inspection rubber washer 3mm thick bolts and nuts complete . PVC S&S Pipes (75mm)

P/F of Plain bend (100mm)

P/F of Plain bend (75mm)

Providing and filling the joints with spun yarn cemnet slurry and cement mortar 1 : 2 Mix (100mm)

Providing and filling the joints with spun yarn cemnet slurry and cement mortar 1 : 2 Mix (75mm)

P/F Tee - Junction of required degree with access door , inserted rubber washer 3mm thick bolts and nutscomplete 100x100x100 PVC 1mm ( 100mm )

P/F Tee - Junction of required degree with access door , inserted rubber washer 3mm thick bolts and nutscomplete 100x100x100 PVC 1mm ( 75mm )

P/F of PVC Reducer 100- 50mm Dia

Providing and fixing liquid PTMT soap container 109mm wide 125mm high and of approved quality weighing not less than 105 gms

P/F PTMT towel rail with brackets fixed to wooden cleats with CP brass with concealed fitting arrangement of approved qaulity (600mm long toatl length 645mm, 78mm wide and effective hight 8mm weghining not less than 190gms

CP/F of CP Grattings 100mm dia and 75mm

P/F of PVC Connections 15mm

Construction of brick masonary inspection chambers/manholes brick work 9" thick in cement mortar 1 : 4 incld: earth work , preparing base , laying foundation concrete 1 : 4 : 8 mix, plaster 1 : 4 mix incld: finishing , laying cement conc: floring 1 : 2: 4 (1 Cement : 2 coaese sand : 4 grade stone) with finishing , making proper channels incld: RCC slab 1 :2: 4 with G.I manhole cover of size 18"x18" of cost iron with gangle frame of approved make incld:all carraiges complete

P/F Master Trap

Providing and fixing 2 HP C.O Motor incuding all fittings 2 No. ball valve , non return valve vertical /horizontal shelter base electric panel awitch board with DP MCB 20 Amph

Providing and fixing of Gesers (Venus, Racold or equliavent brand isi marked ) incld: all necessary fitings complete job

50 Litre for Wash room

Septic Sokage_Pit

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 stone agg:)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form w

Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls

Dry random rubble masonry with hard stone in foundation and plinth: with Bond stone incld: all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more.

Provision for supply and laying of manhole cover heavy duty of cost iron 18"x18" size of angle iron frame

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Computer Room

Providing and fixing panelling of imported wood over 12mm thick plywood incl. joists of 2-2.5 inch section under plywood for levelling and prepration of surface and polishing cost of nails, fixing charges with skirting chair rails, and cornic with necessary screws, priming coat on unexposed surface etc, complete.

P/F of plywood ceiling consisting of 10 mm thick Grade IST plywood over 2 x 1.5 inch wooden joists of popular wood including nailing side cornice , primming and painting of desired shade and manufacture as desired by engineer in charge

Library Room

Demolishing brick work In cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Brick work with FPS (7.5) in 1:6 mix cement mortar in superstructure above plinth level upto floor V level incl. carriage etc complete.

15 mm thick cement sand plaster on rough surface of single or half brick wall

Providing and fixing panelling of imported wood over 12mm thick plywood incl. joists of 2-2.5 inch section under plywood for levelling and prepration of surface and polishing cost of nails, fixing charges with skirting chair rails, and cornic with necessary screws, priming coat on unexposed surface etc, complete.

P/F of plywood ceiling consisting of 10 mm thick Grade IST plywood over 2 x 1.5 inch wooden joists of popular wood including nailing side cornice , primming and painting of desired shade and manufacture as desired by engineer in charge

Meeting Hall

Providing and fixing panelling of imported wood over 12mm thick plywood incl. joists of 2-2.5 inch section under plywood for levelling and prepration of surface and polishing cost of nails, fixing charges with skirting chair rails, and cornic with necessary screws, priming coat on unexposed surface etc, complete.

P/F of plywood ceiling consisting of 10 mm thick Grade IST plywood over 2 x 1.5 inch wooden joists of popular wood including nailing side cornice , primming and painting of desired shade and manufacture as desired by engineer in charge

Auditorium

Providing and fixing panelling of imported wood over 12mm thick plywood incl. joists of 2-2.5 inch section under plywood for levelling and prepration of surface and polishing cost of nails, fixing charges with skirting chair rails, and cornic with necessary screws, priming coat on unexposed surface etc, complete.

P/F of plywood ceiling consisting of 10 mm thick Grade IST plywood over 2 x 1.5 inch wooden joists of popular wood including nailing side cornice , primming and painting of desired shade and manufacture as desired by engineer in charge

Boundary Wall

Demolishing brick work In cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Brick work with FPS (7.5) in 1:6 mix cement mortar in superstructure above plinth level upto floor V level incl. carriage etc complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases of columns etc. for mass concrete.

15 mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Dismataling of old plaster or skirting , racking out joints and cleaning the surface for plaster incld: disposal of rabbuish material with a lead of 50 mtr

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Exterior finishing walls with water proof cement of required sahe on new work two or more coats applied @ 3.84/Kg/10 SQM

Cement concrete coping 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate. sqm sqm

Carriage of material by mechanical transport incld: loading unloading etc complete

Stone agg; for an avg: laed of 17 Kms

Sand for an avg: lead of 32 Kms

Bricks for an avg lead of 12 Kms

Single Quarter (G + 1) and Single Unit G+1 Family Quarter ( Electric Part )

Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) Incl. cost of conduit.

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) incl. cost of conduit

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent)

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.)

Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent)

3 pin 5A - 10A socket.

indicator.

Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex/KEI/RR make in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) incl. cost of conduit

Supply, installation, testing and commissioning of 10 Watt LED recessed/ mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India , Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). Commercial series.

Supply, installation, testing and commissioning of 3 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of extension of GI rod (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply, installation, testing and commissioning of 150-200 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton).

Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required.

Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire

2 x 6 sq.mm + 1x 6 sq. mm earth wire

2 x 10 sq.mm + 1x 6 sq. mm earth wire

Supply and fixing of 16 way Double door surface/ recess mounting , Horizontal type, 240 V, SPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32A DP MCB rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A DP MCB rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 3 mtr. Long GI earthing electrode, 80 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound.

SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator, CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type)

Normal Incoming

125 Amp DP MCB

ON Load Change Over Switch FP 100 amp. (Front operated)

Aluminum Bus Bar 250 Amp set of 2 strips

Aluminum Bus Bar 200 Amp set of 2 strips

Digital Metering devices, comprising of Voltmeter, Ammeter, Indicating Lamp, 2 Nos, etc.

Outgoing

63 Amp, DP MCB

40 Amp, DP MCB

32 Amp, DP MCB

Space for 12 way MCBs.

Supply, laying, connecting and commissioning of 50 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped. ( under ground).

Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs.

Supply, installation, testing and commissioning of 2KVA (2000VA) Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 2 no. 12V, 180 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/ output leads of required size and length, carriage and applicable taxes.

Repair and renovation of Meeting Hall at DIET Kulgam . ( Electric Part )

Rewiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface or recessed existing conduit incl. dismantling, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make )

Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface or recessed as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make )

1 x 1.5 sq. mm earth wire (Green)

1 x 2.5 sq. mm earth wire (Green)

1 x 4.0 sq. mm earth wire (Green)

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) excl. cost of conduit

Supply and fixing of GI/ metal box along with modular base and cover plate for modular switches/ sockets in recess, etc. as required.

4 module

6 module

8 module

Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider/Legrand or equivalent)

.3 pin 5A - 10A socket

. indicator.

6 pin 15/16A socket.

15/16A switch.

. 5A - 10A switch.

Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex/KEI/RR make in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) excl. cost of conduit

Supply, installation, testing and commissioning of 12 Watt LED recessed/ mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India , Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). Commercial series. Auditorium=30 no.& corridor=34 no.

Supply, installation, testing and commissioning of 20 Watt (4 feet long) LED ceiling / wall mounted batten ( tube lights) having aluminum housing, minimum 80lm/w, average life 50000 hours. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/ handing over of site to the intending department (Havells/ Philips/ Crompton/ Jaguar/Wipro).

Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required.

Supply and fixing of 32A modular plug/ socket with 32A DP MCB.

Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2 x 6.0 sq.mm + 1x 6.0 sq. mm

Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans of Havells/ Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of ceiling rose, extension of Gi pipe/rod , iron clips (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in walls and making good the same or fixed with necessary clips and rowel plugs complete.

Supply and fixing of backlite sheet , 2 mm thick for inspection cover, etc. or as required.

Additional rooms (Academic & Administrative Blocks) at DIET Kulgam (G + 1). ( Electric Part )

Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) Incl. cost of conduit.

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) incl. cost of conduit

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent)

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.)

Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent) ii. indicator.

3 pin 5A - 10A socket.

ii. indicator.

Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex/KEI/RR make in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) incl. cost of conduit

Supply, installation, testing and commissioning of 12 Watt LED recessed/ mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India , Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). Commercial series.

Supply, installation, testing and commissioning of 3 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of extension of GI rod (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply, installation, testing and commissioning of 100Watt LED Flood lighting luminaries having aluminum body, minimum 100lm/w, the luminary housing should be aluminum and the luminary optics shall have a high efficiency with transmittance, average life 50000 hours, Operating temperature -10`C to +45`C. LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro).

Supply, installation, testing and commissioning of 150-200 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton).

Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required.

Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire

2 x 6 sq.mm + 1x 6 sq. mm earth wire

2 x 10 sq.mm + 1x 6 sq. mm earth wire

Supply and fixing of 16 way Double door surface/ recess mounting , Horizontal type, 240 V, SPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32A DP MCB rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A DP MCB rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Providing / laying of shock proof rubber mat of 2mtr x1 mtr and 12 mm thick in size.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 3 mtr. Long GI earthing electrode, 80 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound.

SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator, CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type)

Normal Incoming

125 Amp DP MCB

ON Load Change Over Switch FP 100 amp. (Front operated)

Aluminum Bus Bar 250 Amp set of 2 strips

Aluminum Bus Bar 200 Amp set of 2 strips

Digital Metering devices, comprising of Voltmeter, Ammeter, Indicating Lamp, 2 Nos, etc.

Outgoing

63 Amp, DP MCB

40 Amp, DP MCB

32 Amp, DP MCB

Space for 12 way MCBs.

Supply, laying, connecting and commissioning of 50 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped. ( under ground).

Supply, laying, connecting and commissioning of 35 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped. ( under ground). Generator supply.

Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) pipe, 90 mm dia.(OD – 90 mm & ID – 76 mm) ISI marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes.(complete job)

Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs.

Supply, installation, testing and commissioning of 2KVA (2000VA) Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 2 no. 12V, 180 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/ output leads of required size and length, carriage and applicable taxes.

Supply and fixing of 32A modular plug/ socket with 32A DP MCB.

Repair / renovation of Auditorium at DIET Kulgam ( Electric Part ).

Rewiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface or recessed existing conduit incl. dismantling, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make )

Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface or recessed as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make )

1 x 1.5 sq. mm earth wire (Green)

1 x 2.5 sq. mm earth wire (Green)

1 x 4.0 sq. mm earth wire (Green)

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) excl. cost of conduit

Supply and fixing of GI/ metal box along with modular base and cover plate for modular switches/ sockets in recess, etc. as required. .

4 module

6 module

8 module

Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider/Legrand or equivalent)

indicator.

.6 pin 15/16A socket.

15/16A switch.

5A - 10A socket.

Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex/KEI/RR make in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) excl. cost of conduit

Supply, installation, testing and commissioning of 18 Watt LED recessed/ mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India , Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). Commercial series. Auditorium=30 no.& corridor=34 no.

Supply, installation, testing and commissioning of 20 Watt (4 feet long) LED ceiling / wall mounted batten ( tube lights) having aluminum housing, minimum 80lm/w, average life 50000 hours. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/ handing over of site to the intending department (Havells/ Philips/ Crompton/ Jaguar/Wipro).

Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton/ Anchor).

Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required.

Supply and fixing of 32A modular plug/ socket with 32A DP MCB.

Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2 x 6.0 sq.mm + 1x 6.0 sq. mm

4 x10.0 sq.mm + 2x 6.0 sq. mm

Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans of Havells/ Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of ceiling rose, extension of Gi pipe/rod , iron clips (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply, installation, testing and commissioning of 400 mm sweep wall fans of Havells/ Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. making of necessary connections.

Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in walls and making good the same or fixed with necessary clips and rowel plugs complete.

Supply and fixing of backlite sheet , 2 mm thick for inspection cover, etc. or as required.

Supply, installation, testing and commissioning of 2KVA (2000VA) Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 2 no. 12V, 180 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/ output leads of required size and length, carriage and applicable taxes.

30 bedded Boys Hostel G+3 and 30- Beded Girls Hostel G+3 . ( Electric Part )

Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) Incl. cost of conduit.

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) incl. cost of conduit

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent)

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.)

Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box , incl. connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent) i.3 pin 5A - 10A socket. ii. indicator.

3 pin 5A - 10A socket.

indicator.

Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex/KEI/RR make in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) incl. cost of conduit

Supply, installation, testing and commissioning of 12 Watt LED recessed/ mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India , Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). Commercial series.

Supply, installation, testing and commissioning of 3 star 1200 mm sweep ceiling fans of Havells / Crompton Greaves/Bajaj/ Usha (Sample to be got approved), incl. cost of extension of GI rod (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply, installation, testing and commissioning of 100Watt LED Flood lighting luminaries having aluminum body, minimum 100lm/w, the luminary housing should be aluminum and the luminary optics shall have a high efficiency with transmittance, average life 50000 hours, Operating temperature -10`C to +45`C. LM79 & LM80 test report should be from Govt. Approved NABL lab / Govt. Of India. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro).

Supply, installation, testing and commissioning of 150-200 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton).

Supply, installation, testing and commissioning of 600 mm sweep industrial type exhaust fans (Sample to be got approved), incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections

Supplying and fixing of modular blanking plates on existing modular plate and switch box ,excluding modular plate as required.

Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2 x 2.5 sq.mm + 1x 2.5 sq. mm earth wire

4 x 6 sq.mm + 2x 6 sq. mm earth wire

4 x 10 sq.mm + 2x 6 sq. mm earth wire

Supply and fixing of Double door surface/ recess mounting , Vertical/ Horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. i. 6 Way (4 +18) .

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32A TP&N rating 240/ 415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A TPN rating 240/ 415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the MCB distribution board complete with necessary connections.

Providing / laying of shock proof rubber mat of 2mtr x1 mtr and 12 mm thick in size.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 3 mtr. Long GI earthing electrode, 80 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound.

SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator, CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type)

Normal Incoming

250 Amp, 50 KA, FP MCCB incl. Spreader links

ON Load Change Over Switch FP 200 amp. (Front operated)

Aluminum Bus Bar 500 Amp set of 4 strips

Aluminum Bus Bar 400 Amp set of 4 strips

Outgoing

100 Amp, TPN MCB

32 Amp, TPN MCB

Supply, installation , testing and commissioning of 20 KVA, 3-Phase, 415V,LT, Unbalanced AVR of Essentials, KE, ALBA, Chinar make, operating from input voltage of L-L=155-460V & L-N=90-265V, thereby producing the output voltage of 415V +_2% Phase to Phase and 230V +_2% Phase to Neutral. The AVR should have inbuilt Over voltage protection, Under voltage protection & Over loading with TDR. The stabilizer shall be servo controlled automatic, ONAN cooled and provided with first filling of fresh filtered transformer oil having required di-electric strength. The stabilizer shall be capable of smooth operation up to 10% un-balanced in the load currents complete with servo bye pass system consisting of 100A four pole manual type change over switch, 100A four pole MCCB 01 no. and required bus bar. The supplier has to give guarantee for any manufacturing defect with three servicing of the equipment for two years reckoned from commissioning. The job also includes all applicable taxes, carriages , loading and unloading.

Supply, laying, connecting and commissioning of 150 sq. mm 3.5 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped. ( under ground).

Supply, laying, connecting and commissioning of 95 sq. mm 3.5 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped. ( under ground).

Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) pipe, 200 mm dia.(OD – 200 mm & ID – 175 mm) ISI marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes.(complete job)

Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs.

Furniture

Supply and installation of single Bed f Standard size bed with storage having standard dimensions of solid wood including Premium embossed finishing with P.U. leather or premium cloth and leather back cushion and as required and directed by Engineer In charge incld. edges Covered with Wooden Moulding, Wood work duly Polished with Carriages, Loading, Unloading, and all leads and lifts involved upto site of Work

Supply of Writing/ Study table with a Chair made out of Imported hard wood with foam Seat and Wooden Strips as back, Woodwork duly Polished

Providing and Fixing of Excel type matting for rooms Curtains with embroidered Flowers excluding brackets, Stainless-steel-Road

Providing /fixing of Acoustic Equipments as perf requirement for Auditorium Hall, incld: all fixtures etc complete as per the directio0ns of Engineer Incharge and Concerned Deptt.

Please Enable Macros to View BoQ information