KMC/LTG/CRM/11/CRK/26-27

Supply and delivery of Single Phase preventer Relay suitable for 415V, 6 wire, upto 20HP motor (Make: L & T/ABB/Schneider/ Simence/ Minilic/ GE).

...V... GROOVED PULLY (C.I): Supply and fixing the 3way C.I ...V... grooved pulley with complete mechanism key way suitable to EN-24, 50 mm dia of shaft end. a) blower driving (375 mm dia)

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection Legrand FP 125 A

BUILDING WORKS (E) ROOFING, SHEET WALLING &WATERPROOF TREATMENT . A. ROOFING & SHEETWALLING 15. Supplying, fitting & fixing circular corrugated Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 55 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (Aluminium sheet to be supplied by contractor). (i) In Roof:- b) With 0.71 mm thick sheet

BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m

TAKING OUT THEL.T.SQ.CAGE INDUCTION MOTOR AFTER DISCONNECTIONS OF SUPPLY TERMINAL CONNECTIONS INCLUDING EARTHING TERMINAL CONNECTION, FROM COUPLING END OF 25/50 CUSEC VERTICAL AXIAL FLOW PROPERLLER PUMP AFTER DISMANTLING THE SAME FROM THE MOTOR STOOL THE MOTOR IS TO BEKEPT ON WOODEN SLEEPER AT A SUITABLE DISTANCE FROM THE FLOOR WITH OUT DAMAGING THE EARTHING STRIPS AND CABLES ETC.AS PER DIRECTION OF E.I.C (PAGE NO. 123, I.NO. 5.3 J.1,IRRIGATION & WATERWAYS SCHEDULE, GOVT. OF WEST BENGAL)

PRELIMINARY CHECKING OF THE WHOLE MOTOR (LT SQ. CAGE IM) AND TESTING OF I.R. VALUE, LOAD CURRENTS, LEAKAGE FACTOR OF STATOR & ROTOR, TERMINAL LEAD JOINTS OF STATOR CONNECTION ENDS, INSULATION OF GLASS FIBRE TERMINAL BAR,DOUBLECAGE ROTOR ENDRINGS AND ALL OF MOTOR BARS AND BARJOINTS,HOUSING OF D.E.& NDE SHIELD BEARING HOUSING ETC. BEFORE WORK TO DETECT FAULT. (PAGE NO. 123, I.NO. 5.3 J.2, IRRIGATION & WATERWAYS SCHEDULE, GOVT. OF WEST BENGAL)

COMPLETE SERVICING AND HEAT VARNISHING OF 415VOLT, 3 PHASE L.T. SQ. CAGE INDUCTION MOTOR AFTER CLEANING THE STATOR AND HEATING IT UP PERIODICALLY AND VARNISHING BY DR. BECK?S GRADED INSULATING VARNISH TO OBTAINS TABLE IR VALUE,CLEANINGUPTHEROTOR,INCLUDING HEATING FOR DEMOISTURISATION, LACKER COATING ON THE SURFACE OF ROTOR STAMPINGS, CLEANING AND RO PRIMING ON THE END SHIELD COVERS, BEARING HOUSING AND COMPLETE THE NECESSARY REPAIRING WORKS AS PER DIRECTION OF E.I.C. - UPTO 75KW LTSQ.CAGE IM (PAGE NO. 123, I.NO. - 5.3 J.3.1, IRRIGATION &WATERWAYS SCHEDULE,GOVT. OF WEST BENGAL)

REPLACING AND JOINTING OF NEW 1.1KV GRADE 70SQ.MM.FIBRE GLASS COPPER WIRE TERMINALS LEADS BY 100% SOLDER (EYRE) COMPOUNDED WITH EYRE-7 PASTE, (6 LEADS). - UPTO 75KW LT SQ.CAGE IM (PAGE NO. 123, I.NO.- 5.3 J 4.1, IRRIGATION & WATERWAYS SCHEDULE, GOVT. OF WEST BENGAL)

Supply and fixing the tough ...V... belts of sizes(ECODRIVE make)-B98