Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.8 LAccepted-AOC 5C H M APARTMENT SATI JAYMATI ROAD ATHGAON KAMRUP ASSAM 781001 | KAMRUP METRO | ASSAM | 781001 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹51.0 L+₹1.1 L (2.12%)Rejected-Finance | L2 | Rejected-Finance Other than L1 bidder | |
| 3 | L3₹51.8 L+₹1.8 L (3.61%)Rejected-Finance NO 3 WD BUILDING JP AGARWALLA ROAD BHARALUMUKH KAMRUP ASSAM 781009 UDYAM AS 03 0009483 | KAMRUP METRO | ASSAM | 781009 | L3 | Rejected-Finance Other than L1 bidder |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
7 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
REPAIR/MAINT OF PSS TANKS IN VARIOUS LOCATIONS UNDER GE NARANGI
2023_MES_615314_1
8687/NAR/E8
Open Tender
Civil Works
Item Rate
180 days
Narangi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Narangi
₹1 L
Yes
7 Dec 2023
24 Aug 2023
9 Oct 2023
24 Aug 2023
7 Oct 2023
23 Sept 2023
Amount
Material and labour for complete cleaning of inside surface of Pressed steel tank (over a height of approx 20 mtr) with wire brush (including hammering, sand blasting to remove heavy rust) removing of mild scale and rust by application of rust removing chemical by brush and leave the surface to react for 15-30 Mins. Then the rusty surface will change their colour. After that remove the loose particles of rust by wire brush complete all as specified and directed. Make:- Sika Rustoff 100 or equivalent in Pidilite/ FOSROC
Material and labour for removal of old inter panel sealant and use a solvent free two component epoxy resin, mixing the component A and B at recommended ratio and prepare the sealing material and use it in between the jointing panel as sealant to assure all the interplate joints are sealed in appropriate manner complete all as specified and directed. Make:- Sika Guard 694F (I) or equivalent in Pidilite/ FOSROC)
Material and labour for one coat food grade epoxy based Zinc rich corrosion protection primer by stirring the hardner and resin individually with mechanized strirrer of proper size. Then add the entire content of the hardner into Resin container and stir the two components throughly using a low speed mixer for about 2 to 3 minutes until a uniform colour of the mixture is obtained. One coat of 100 micron need to be applied on total inside steel surface and external surface where needed complete all as specified and directed. Make:- Sika Friazinc R or equivalent in Pidilite/ FOSROC)
Material and labour for coating with foodgrade coaltar epoxy resin (two part reaction hardening chemical resistant coating of low solvent content based on coal tar epoxy resin in combination with mineral fillers)after through mixing of a base and hardner, the mixed material is applied on the steel surface including second coat where it is needed. Since the pot-life is very short, application must be done very quickly (Inside of tank application only). complete all as specified and directed. Make:- Sika Interol poxitar or equivalent in Pidilite/ FOSROC) [Note: - For Item Ser No 1.00 to 4.00 here-in-before, all the chemical should be applied by authorised applicator of the manufacturer and five years guarantee certificate from manufacturer has to be obtained after treatment]
Taking down old corroded / rusted / wornout MS plate, angle, frame, tie rod, cleat, round MS pipe etc complete of any description not otherwise provided for by cutter or arc welding or gas cutting complete and kept aside for further disposal complete all as specified and directed.
Supply & fix structural steel works including fabrication, welding for framed work such as compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates etc joist channel, angle, tee section ladder, frame work of water tank railing channels for mounting and support structure, Tie rod, Angle iron, bracing angle, cleat for base plate etc MS Plate, MS chequered plate, cross arms, bracing, support clamps and base plate fabricated out of structural steel sections (Fe.290-E. (Gde-165) including welding, bending hot or cold, cutting, drilling holes for bolts in any shape or size as required in staging or structure of over head water tank (up to height of 20 mtr) complete all as specified and directed.
Material and labour for carefully dismantling of top cover of pressed steel tanks for repair work including all T&P for dismantling, lowering old corroded / wornout pressed steel sheets/ plates including tie rod and angle iron from top of tank by opening corroded nuts & bolts of any capacity on height 15 to 21 Mtr in situation or by cutting with cutter or by gas/ arc welding or opening alongwith connected sheets of tank or complete opening of sheet panels of tanks, supporting angles and taking down at ground and kept aside in safe custody for reuse complete all as specified and directed. Note : Necessary T&P required for the job deemed to be included in the quoted rates.
Material and labour for carefully dismantling of side plates of pressed steel tanks for repair work including all T&P for dismantling, lowering old corroded / wornout pressed steel sheets/ plates including tie rod and angle iron from side of tank by opening corroded nuts & bolts of any capacity on height 15 to 21 Mtr in situation or by cutting with cutter or by gas/ arc welding or opening alongwith connected sheets of tank or complete opening of sheet panels of tanks, supporting angles and taking down at ground and kept aside in safe custody for reuse complete all as specified and directed. [Note : Necessary T&P required for the job deemed to be included in the quoted rates.]
Material and labour for carefully dismantling of bottom plates of pressed steel tanks for repair work including all T&P for dismantling, lowering old corroded / wornout pressed steel sheets/ plates including tie rod and angle iron from bottom of tank by opening corroded nuts & bolts of any capacity on height 15 to 21 Mtr in situation or by cutting with cutter or by gas/ arc welding or opening alongwith connected sheets of tank or complete opening of sheet panels of tanks, supporting angles and taking down at ground and kept aside in safe custody for reuse complete all as specified and directed. [Note : Necessary T&P required for the job deemed to be included in the quoted rates.]
Supply, erection, hoisting and fixing galvanished pressed steel plates/ sheets 3.00/ 3.15 mm thick for top cover as per existing sample for top cover of galvanished pressed steel tank at the top of 15 to 21 mtr height staging with and including provision of nuts & bolts , jointing materials such as good quality rubber gasket, lead wool wire, black putty, epoxy including painting with two coats of zinc chromate or red oxide primer on inside of the sheet etc to make the joints leak proof including arc / gas welding if required complete all as specified and directed. Note : All components of pressed steel tank including plates, nuts & bolts etc shall be galvanished as per relevant IS and the quoted rates is deemed to be included for same.
Supply, erection, hoisting and fixing galvanished pressed steel plates 5 mm thick for side plates as per existing sample for side plates of galvanished pressed steel tank at the top of 15 to 21 mtr height staging with and including provision of nuts & bolts , jointing materials such as good quality rubber gasket, lead wool wire, black putty, epoxy including painting with two coats of zinc chromate or red oxide primer on inside of the sheet etc to make the joints leak proof including arc / gas welding if required complete all as specified and directed. [Note : All components of pressed steel tank including plates, nuts & bolts etc shall be galvanished as per relevant IS and the quoted rate is deemed to be included for same.
Supply, erection, hoisting and fixing galvanished pressed steel plates 6 mm thick for bottom plates as per existing sample for bottom plates of galvanished pressed steel tank at the top of 15 to 21 mtr height staging with and including provision of nuts & bolts, jointing materials such as good quality rubber gasket, lead wool wire, black putty, epoxy including painting with two coats of zinc chromate or red oxide primer on inside of the sheet etc to make the joints leak proof including arc / gas welding if required complete all as specified and directed. [Note : All components of pressed steel tank including plates, nuts & bolts etc shall be galvanished as per relevant IS and the quoted rate is deemed to be included for same.]
Re-fixing only including erection, hoisting of old serviceable galvanished pressed steel plates/ sheets 3.00/ 3.15 mm thick for top cover as per existing sample for top cover of galvanished pressed steel tank at the top of 15 to 21 mtr height staging with and including provision of nuts & bolts, jointing materials such as good quality rubber gasket, lead wool wire, black putty, epoxy etc to make the joints leak proof including arc / gas welding if required complete all as specified and directed. Note : No separate item will be paid for re-fixing. All components of pressed steel tank excluding steel plates/ sheets but inclusive of nuts & bolts etc shall be galvanished as per relevant IS and the quoted rate is deemed to be included for same.
Re-fixing only including erection, hoisting of old serviceable galvanished pressed steel plates 5 mm thick for side plates of galvanished pressed steel tank at the top of 15 to 21 mtr height staging with and including provision of nuts & bolts , jointing materials such as good quality rubber gasket, lead wool wire, black putty, epoxy etc to make the joints leak proof including arc / gas welding if required complete all as specified and directed. Note : No separate item will be paid for re-fixing. All components of pressed steel tank excluding steel plates/ sheets but inclusive of nuts & bolts etc shall be galvanished as per relevant IS and the the quoted rate is deemed to be included for same.
Re-fixing only including erection, hoisting of old serviceable galvanished pressed steel plates 6 mm thick for bottom plates of galvanished pressed steel tank at the top of 15 to 21 mtr height staging with and including provision of nuts & bolts , jointing materials such as good quality rubber gasket, lead wool wire, black putty, epoxy etc to make the joints leak proof including arc / gas welding if required complete all as specified and directed. Note : No separate item will be paid for re-fixing. All components of pressed steel tank excluding steel plates/ sheets but inclusive of nuts & bolts etc and shall be galvanished as per relevant IS and the quoted rate is deemed to be included for same.
Material and labour for painting to MS structure of PSS tank of capacity 0.072 LG from outside of tank on all sides including MS staging upto height of 20 Mtr having, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow including fittings and various type of valve as per colour code complete from ground level to tank including one coat of red oxide primer, one under coat and one finishing coat of synthetic enamel paint of Sky Blue colour complete all as specified and directed.
Material and labour for painting to MS structure of PSS tank of capacity 0.50 LG from outside of tank on all sides including MS staging upto height of 20 Mtr having, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow including fittings and various type of valve as per colour code complete from ground level to tank including one coat of red oxide primer, one under coat and one finishing coat of synthetic enamel paint of Sky Blue colour complete all as specified and directed.
Material and labour for painting to MS structure of PSS tank of capacity 0.75 LG from outside of tank on all sides including MS staging upto height of 20 Mtr having, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow including fittings and various type of valve as per colour code complete from ground level to tank including one coat of red oxide primer, one under coat and one finishing coat of synthetic enamel paint of Sky Blue colour complete all as specified and directed.
Material and labour for painting to MS structure of PSS tank of capacity 1 LG from outside of tank on all sides including MS staging upto height of 20 Mtr having, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow including fittings and various type of valve as per colour code complete from ground level to tank including one coat of red oxide primer, one under coat and one finishing coat of synthetic enamel paint of Sky Blue colour complete all as specified and directed.
Material and labour for painting to MS structure of PSS tank of capacity 0.10 LG from outside of tank on all sides including MS staging upto height of 20 Mtr having, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow including fittings and various type of valve as per colour code complete from ground level to tank including one coat of red oxide primer, one under coat and one finishing coat of synthetic enamel paint of Sky Blue colour complete all as specified and directed.
Material and labour for painting to MS structure of PSS tank of capacity 0.1688 LG from outside of tank on all sides including MS staging upto height of 20 Mtr having, MS structure, MS/CI/DI Pipe lines inlet/outlet/overflow including fittings and various type of valve as per colour code complete from ground level to tank including one coat of red oxide primer, one under coat and one finishing coat of synthetic enamel paint of Sky Blue colour complete all as specified and directed.
Taking down old unserviceable and Supply & fix air termination, single pointed, copper rod 12mm dia and 300mm long complete all as pecified and directed.
Taking down old unserviceable and Supply & fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screw fixed in structure of PSS tank complete all as specified and directed.
Supply and fix Copper strip 20 x 3.15mm with saddles and fixing in MS structure of PSS water tank of heilght upto 20 mtr for roof conductors and down conductors above ground up to test point including taking down old strip complete all as specified and directed.
Notes for item 1.00 to 24.00: (a) The quoted rates are deemed to be included all the requisite T&P and staging, Staged overhead, scaffolding inside and outside if any for the job against BOQ item No 1 to 24 and nothing extra shall be payable on this account. (b) After repair work if any leakage found during testing or within a period of two years, contractor will repair the same without any extra cost. (c) Necessary safety measure has to be stricty maintained by the contractor labour/ person employed on the worksite during execution of work. Contractor himself or his auth Competent person should be present during execution of work. (d) The complete work will be carried out by a professional agency only as approved by GE before commencement of work and after completion of work, necessary test certificate regarding structural stability of the complete PSS tank will be submitted by the contractor including complete supporting structure from an independent agency (IIT/NIT) having proper accreditation to Engr-in-Charge. The rates for the same are deemed to be included in the quoted rates and nothing extra shall be payable to the contractor on this account. Concerned executive shall satisfy himself with regard to structural stability before making payment with respect to such items. (e) All persons deployed in work be insured as per norms and copy of insurance will be submited to Engr-in-Charge before starting the work.
Material and labour earthing complete with copper earth plate electrode of size 60cm x 60cm x 3.15mm buried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including copper strip of size 20x3 mm as earth lead upto 7.5 mtr by means of suitable bolts, nuts, check nuts and washers and protected by light grade 40 mm bore GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal, salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mm C/C both ways and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded stone aggregates) including excavation and earth work disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on electrical plate No 3 of SSR Part I 2009
Supply and fixing in replacement of sluice valve Class PN-1.6 conforming to IS 14846-2000, long body type, ISI marked with iron wheel and stainless steel spindle and fly nut, flanged both ends suitable for 150 mm bore all as specified and directed.
All as per item No. 27.00 here-in-before but 200 mm bore
All as per item No. 27.00 here-in-before but 100 mm bore
Material and labour for Rubber or fibre board gaskets for flanged joints of size 100mm dia pipe complete all as specified and directed.
Material and labour for Rubber or fibre board gaskets for flanged joints of size 150mm dia pipe complete all as specified and directed.
Material and labour for Rubber or fibre board gaskets for flanged joints of size 200mm dia pipe complete all as specified and directed.
Supply & fix in repair cast iron non return valve suitable for 100 mm bore CI pipe both side flanged (ISI Marked) confirming to IS 5312 (Pt-I) including nut & bolts complete all as specified and directed. .
Taking out old unserviceable MS level gauge and S&F New MS level gauge of same length having marking of levels at various intervals with bold letters so that it is visible from ground level. The work include fixing the gauge by welding , painting and connected assembly such as level indicator, float ball, SWR rope and fixing level in wall of OH PSS tank of upto 20 Mtr height complete all as specified and directed.
Supply, install on Top of OH PSS tank, testing and commissioning of twin dome aviation obstruction light with two Nos LED 10W lamp 230V single phase complete all as specified and directed.
Supply, laying, fixing on MS structure through MS clamp or saddle including protection pipe of size 25mm bore MS pipe where required complete and XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade single stranded corss-sectional area 4 Sq mm 3 core and connected to near by street light point complete all as specified and directed. Note : Earth work required if any is deemed to be included in the quoted rates.
Material and labour for DI fittings of size 100 mm to 450 bore such as bends, tapers, tee pieces (single & double branch) any type and angle/radius and straight connecting pieces but all ends flanged or any other fittings as per site requirement and as directed by Engr-in-Charge complete all as specified and directed.
Taking down repairable/leakage DI/CI rising /distribution flanged pipe of size 150 mm dia by opening from tank, supporting angles, nuts & bolts etc. and kept aside for refixing of serviceable pipe and removal of damaged pipe complete all as specified and directed.
All as per item No. 38.00 here-in-before but of size 200mm dia pipe
All as per item No. 38.00 here-in-before but of size 100mm dia pipe
Refixing the serviceable flanged CI/DI pipe obtained from item No. 38.00 here-in-before of size 150mm dia by nuts & bolts alongwith rubber gasket and supporting MS angles in overhead PSS tank of height up to 20 Mtr including leakage testing complete all as specified and directed. Note : Rubber flanged joints shall be measured and paid separately under relevant items. However, the nuts, bolts and supporting MS angle are deemed to be included in the quoted rate.
Refixing the serviceable flanged CI/DI pipe obtained from item No. 39.00 here-in-before of size 200mm dia by nuts & bolts alongwith rubber gasket and supporting MS angles in overhead PSS tank of height up to 20 Mtr including leakage testing complete all as specified and directed. Note : Rubber flanged joints shall be measured and paid separately under relevant items. However, the nuts, bolts and supporting MS angle are deemed to be included in the quoted rate.
Refixing the serviceable flanged CI/DI pipe obtained from item No. 40.00 here-in-before of size 100mm dia by nuts & bolts alongwith rubber gasket and supporting MS angles in overhead PSS tank of height up to 20 Mtr including leakage testing complete all as specified and directed. Note : Rubber flanged joints shall be measured and paid separately under relevant items. However, the nuts, bolts and supporting MS angle are deemed to be included in the quoted rate.
Supply, laying and testing of 150mm bore size DI water mains with flanged ends, class 'K9' in any length, laid in trenches/walls/floors/ceilings with new fittings including rubber gasket, nuts, bolts & washer complete all as specified and directed.
All as per item No. 44.00 here-in-before but Bore size 200 mm
All as per item No. 44.00 here-in-before but Bore size 100 mm
Surface dressing not exceeding 15cm deep including cleaning away all grass vegetation, saplings, shrubs, brushwood, under growth, rooth , levelling & spreading water and removing rubbish, accumulated sand/mud/wastage up to a distance of 200 mtrs outside the periphery of the area under clearance complete all as specified and directed.
Material and labour for preparation of existing painted surfaces of MS and applying two coats of Red oxide paint over and one coat of synthetic enamel paint to surfaces as per colour code complete all as specified and directed.
Material and labour for Cement concrete in foundations, filling and mass concrete 1:2:4, type B2 (using 40 mm graded stone aggregates) for pole foundation complete all as specified and directed.
Material and labour for Cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges of pole complete all as specified and directed.
Material and labour for writing the letters "PS TANK CAP ____ LG" as specified and "SAVE WATER" on the tank having up to height of 20 mtr staging with white synthetic enamel paint on front side and "MES" on other side. Size of letter not less than 40 cm complete all as specified and directed.
Material and labour for construction of brick masonry valve pit of size 150 cm x 150 cm x 120 cm (internal dimensions), using old size sub class 'B' brick, built in CM 1:6 and 15 mm thick cement plaster 1:4 both internally and externally (upto 15cm below the ground level) with 150 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) in foundation, PCC 1:2:4 type B-2 (using 40mm graded stone aggregates) in benching complete with and including 3 mm thick mild steel sheet cover (mounted on angle iron frame of size 50 mm x 50 mm x 6 mm thick, embedded in PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping, fitted with proper locking arrangement, hinges and handle of suitable size and painting with two coats of black bituminous paint over a coat of red oxide or zinc chrome primer on all steel surfaces, including necessary earth work ( in soft/loose soil), returning filling and removal of surplus soil to a distance not exceeding 50 m including dismantling of old valve pit complete all as specified and directed.
All as per item No. 52.00 here-in-before but of size 1200 x1200 x 1000mm
KUNDAN ENGINEERS AND BUILDERS
PURBANCHAL BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .