NIT No. 34, Item No. 24 (2021-22)

S/o Double flanged G.I pipe of 50 dia medium class each of 3 mtrs long duly threaded on both ends welded and fitted with G.I flange on both ends having the slot for sub cable. .Make:- Tata/Jindal

S/o Hut type electrical feeder pillar/m0etal board of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet, having horizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having S.S hinges along with double locking arrangement, having fabricated MS angle iron( 50 mm x 50 mm x 6 mm) frame for mounting of switch gears such as RCCB, MCCB, main switch ampere meter, volt meter and electrical energy meter i/c powder coating painting, Vermin proof.

S/O motor protection unit with programmable time switch up to (7.5 HP to15HP.) Make:- Gain Guard/ Skope/S-Guard/DJB Approved

S/o tail piece of the medium class G.I. pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of G.I. pipe 50mm dia. Make of pipe: TATA/Jindal

S/o M.S. clamp of 600mm length duly fabricated from 12.5mm thick 75mm wide M.S. plate for holding the pipe of 50mm dia.

Supply of bore cover approx size 1’x1’ made out from 6mm thick M.S. sheet in 2 halves & a circular hole in centre 2-1/2” dia with locking arrangement by Nuts & bolt

S/o G.I.900 x 50mm dia. bend having flange at both ends (Heavy duty)

S/o MS nut bolts off size as per requirement

S/o rubber packing 50mm dia flange

Installation of t/well by Lifting & lowering of sub pump set along with all allied items. This includeds electrical wiring and cabeling at site. All tools and tackles i/c tripod, chain pulley pipe wrench etc. shall be arranged by the firm. This includes Testing and commissioning of T/well on load site i/c cartage, loading and unloading of materials.

Swarn Engineers