Execution of Balance Electrical Works of GLF system for

SITC of LED based Airport rotating beacon complying to FAA L 801A AC150 5345 12 (Current edition) and ICAO Annex 14 Vol.1 Par. 5.3.3 complete as per tender specifications.

SITC of ALDIS ATC signalling gun as per following specs 1.Signalling Lamp 24V 1 Nos 2.Suitable Battery 24V 1 Nos 3. Battery Charger 1 Nos 4.Kit of Complete ATC Signal Lamp 5. Should be capable of producing red, green and white signals 6. The light spreading should not be less than 1 degree and not greater than 3 degrees 7. Shatter proof polycarbonate with scratch and chemical proof coating

SITC of 10 mtr internally and externally illuminated, fibre glass frangible lattice type structure, centre tilting type wind sock assembly complete as per ICAO FAA standards and specification including wind sock of 3600mm long made of special natural colour, fungus proof, nylon fabric with alternate black and white strip,with four LED lamps for external illumination and one lamp for internal illumination, One number LED aviation obstruction lamp, provision Internal wiring, necessary civil foundation work, etc. complete as required and providing control box enclosure in CCR hall for operating both in Manual and remote control mode through ALCMS mode.

SITC of Landing H direction indicator complying ICAO standard consisting of three rectangular AL limbs having length of 4000 mm each supported with 50 mm dia Aluminium frangible pipe of 1350 mm length and flanges, suitable wattage linear LED lights with driver minimum IP65 for each limb, each circuits to operate on 230 V, 50 Hz AC supply providing control unit with Relay, Contactor, copper wiring upto JB etc. as required for remote operation of landing T from CCR hall as well as from control tower, connections/interconnections, civil foundations for each legs with MS anchor base plate, casting pedestal up to 1 mtr all around the landing H with 1 2 4 cement concrete of 100 mm thick and neat finish top, painting powder coating, all required materials with SS hardware etc. as required and confirming to tenders technical specifications, terms with conditions etc. complete as required.

Supply of each set of Elevated Type Uni Directional Runway Guard Light Fixture Consisting of 1 pair of yellow lights together, flashing with LED lamp of series circuit 2.8 - 6.6 amps current, Yellow glass if required, 1x2 pole secondary plug, including frangible collar, stand and with all standard accessories ready for site installation as required.and suitable for operation control and monitoring on existing ALCMS

Supply of Inset type Uni directional Taxiway Centre Line Turn Pad light fixture showing green with up to 15 Watts meeting ICAO requirements LED lamp of series circuit 2.8 6.6 amps current, control driver with 8 shallow base with side bottom hole entry and matching body of the fitting, inner body and outer cover made of die cast aluminium complete with connected heat resistant accessories, prism assembly, optical assembly, O ring seal, pressure relief test plug, lense s, two-pole secondary plug, hardware and all standard accessories and ready for site installation as required and as per the enclosed particular specifications and suitable for operation control and monitoring on existing ALCMS Airfield Lighting Control and Monitoring System

Supply of Inset Type Uni Directional Approach Centreline Light Fitting with clear lens clear filter complete with bottom box and all accessories including 6.6A pre focused reflector 2 x 105W or 3 x 105W halogen lamp with connected heat resistant accessories prism assembly, optical assembly, O ring seal pressure relief test plug gas kit cover complete with all other accessories as per ICAO specification etc. as required and as specified.

Supply of 4Cx16 sqmm size of XLPE insulated PVC sheathed, armoured, aluminium conductor under ground cable of 1.1KV grade as per IS 7098 1988 Part I with upto date amendments complete as required.

Supply of following size 5 KV grade Airfield Lighting Cable copper conductor XLPE insulated, PVC sheathed, unshielded, anti termite and rodent treated, UG airfield lighting cable generally confirming to IS 7098 Part II with up to date amendments and particular specifications of the following sizes as required 2Cx6 sqmm

Supply of following size 5 KV grade Airfield Lighting Cable copper conductor XLPE insulated, PVC sheathed, unshielded, anti termite and rodent treated, UG airfield lighting cable generally confirming to IS 7098 Part II with up to date amendments and particular specifications of the following sizes as required 1Cx16 sqmm