REPAIRS AND PAINTING TO STEEL FURNITURE AT ALL UNITS, MAP PHASE I AND MAP PHASE II ACCN UNDER GE BELGAUM

Amount

M&L for one coat of synthetic enamel paint to all exposed external and internal surfaces of locker steel (Furniture Spl Drg No. CWE/ P/ BAN/ 03 and FD- 1029), duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening by applying putty, removing dents, bends & welding wherever required and also oiling and greasing to locker steel for smooth functioning of locking devoices and drawers all as specified and directed.

M&L for one coat of synthetic enamel white paint to all exposed external and internal surfaces of Table bed side steel, duly Spray/ brush painting including necessary preparation of surfaces all as specified and directed.

M&L for one coat of synthetic enamel grey paint to all exposed external and internal surfaces of locker wooden (Furniture Drg No. FD- 222), duly spray/ brush painting including necessary preparation of surfaces all as specified and directed.

M&L for one coat of synthetic enamel grey paint to all exposed external and internal surfaces of locker wooden (Furniture Drg No. FD- 54(M)), duly spray/ brush painting including necessary preparation of surfaces all as specified and directed.

M&L for one coat of synthetic enamel black paint to steel frames of Tale Dining ORs duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening all as specified and directed.

M&L for one coat of synthetic enamel paint to Trestle store room wooden (Furniture Drg No. FD-86) including necessary preparation of surfaces all as specified and directed.

M&L for one coat of synthetic enamel paint to all exposed external and internal surfaces of Almirah steel large with shelf, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening by applying putty, removing dents, bends all as specified and directed.

All as described in item No.07 but Almirah steel large with ½ hanging & ½ shelf

M&L for one coat of synthetic enamel paint to all exposed external and internal surfaces of Almirah steel medium/small with shelf, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening by applying putty, removing dents, bends all as specified and directed.

All as described in item No. 09 but Almirah steel medium/small with ½ hanging & ½ shelf

M&L for one coat of synthetic enamel paint green colour to all exposed external and internal surfaces of Table office clerk steel duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening all as specified and directed.

M&L for one coat of synthetic enamel paint olive green colour to all exposed external surfaces of Chair steel tubular with Arms/ without Arms duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents all as specified and directed

M&L for one coat of synthetic enamel paint olive green colour to all exposed external surfaces of Chair CBA SPL with folded hand rest duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents all as specified and directed

M&L for one coat of synthetic enamel paint white colour to all exposed external surfaces of Teapoy Verandah duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents all as specified and directed

M&L for one coat of synthetic enamel paint olive green colour to all exposed external and internal surfaces of rack steel shelving adjustable (Trade Pattern) of size 1905 x 914 x 689mm duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents all as specified and directed.

All as described in item No. 15 but Rack adjustable 3 tier steel {Furniture Drawing No. FD-106 (M)}

M&L for one coat of synthetic enamel paint olive green colour to all exposed external and internal surfaces of Book shelf open large steel duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening and removing bends and dents all as specified and directed {Furniture Drawing No. FD-69 (M)}

All as described in item No. 17 but Book shelf open small steel {Furniture Drawing No. FD-69 (M)}

M&L for one coat of synthetic enamel white paint to all exposed external and internal surfaces of Stool steel 305 X 305 X 710 mm, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening all as specified and directed.

M&L for one coat of synthetic enamel white paint to all exposed external and internal surfaces of Stool steel 305 X 305 X 510 mm, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening all as specified and directed.

M&L for one coat of synthetic enamel olive green colour paint to all exposed surfaces of bed steel F(G)-4, duly spray/ brush painting including necessary preparation of surfaces by removing rust by scrapping and smoothening all as specified and directed.

Dismantling of existing GI Charpoy for replacing of unserviceable parts like long rails, short rails, legs, GI elbow 3 way, GI check nuts and re-assembling the same by replacing with new/ re-conditioned long rails/ short rails/ legs/ GI elbow 3 way and check nuts all as specified and as directed. Note: New/ re-conditioned items will be measured and paid separately under relevant items of this Schedule.

M&L for 32 mm bore x 1980mm long GI tube medium grade duly threaded as in long rail for charpoy all as specified and as shown on drawing No. FD - 220.

Fabricating only short rail of GI charpoy by alteration of long rails including necessary cutting and threading all as specified and as shown on Drg No. FD- 220 Note: Serviceable portions of long rails obtained from dismantling shall be re-used under this item.

Fabricating only leg of GI charpoy by alteration of short rails including necessary cutting and threading and provision of 3mm thick x 50mm dia MS base plate duly continuous welded to legs all as specified and as shown on Drg No. FD- 220 Note: Serviceable portions of short rails obtained from dismantling shall be re-used under this item.

Supply only GI elbow, 3 way, 32 mm bore suitable for charpoy GI all as specified and as shown on Drg No. FD- 220

Supply only GI check nut, 32 mm dia 6 mm thick suitable for charpoy GI all as specified and as shown on Drg No. FD- 220

S&F hard rubber shoes, black colour, 25 mm size suitable for table dinning OR's including removing unserviceable hard rubber shoes all as specified and as directed.

M&L for electric arc welding to the broken joints of rails, legs and stiffeners of GI charpoy rectangular including finishing the welded joints smooth all as specified and as directed.

M&L for electric arc welding to the broken joints of rails, legs and stiffeners of GI charpoy double decker including finishing the welded joints smooth all as specified and as directed.

M&L for electric arc welding to the broken joints of rails, legs, head frame, foot frame and stiffeners of bed steel including finishing the welded joints smooth all as specified and as directed.

M&L for mild steel works as in angle cleats, supports, bolts and nuts, etc. of suitable size to fix to frame work of charpoy double decker conforming to Fe-290 Gde- E-165 including necessary welding all as specified and as directed.

M&L for one coat of synthetic enamel paint (olive green colour) to GI charpoy double decker including necessary preparation of surfaces all as specified and as directed .

M&L for one coat of synthetic enamel paint (olive green colour) to GI charpoy rectangular including necessary preparation of surfaces all as specified and as directed .

M&L for 18mm thick particle board interior grade with commercial face veneers on both sides duly covered with 22 gauge aluminium sheet and folded at four edges as in table top of Dining table ORs of size 1900 x 685 x 760mm fixed to steel frames with suitable size screws including provision of one coat of black colour synthetic enamel paint to steel frames including taking down unserviceable table top all as specified and as shown on drawing No.FD-165

M&L for mild steel channel leg base of Almirah steel large with ½ hanging & ½ shelf made out of 1mm thick MS sheet duly fabricated to shape and size and welded to bottom by electric arc welding as in replacement of damaged legs wherever required including provision of two coats of synthetic enamel paint (olive green colour) over a coat of red oxide primer all as specified and as directed.

M&L for mild steel channel leg base of Almirah steel medium with ½ hanging & ½ shelf made out of 1mm thick MS sheet duly fabricated to shape and size and welded to bottom by electric arc welding as in replacement of damaged legs wherever required including provision of two coats of synthetic enamel paint (olive green colour) over a coat of red oxide primer all as specified and as directed.

M&L for 25mm x 25mm MS square tubes, 16 gauge, fixed to Table Dining ORs by electric arc welding as in replacement of damaged portions of Table Dining wherever required including provision of two coats of synthetic enamel paint (black colour) over a coat of red oxide primer all as specified and as directed.

S&F mild steel locking device jaw along with 8mm mild steel rod suitable for almirah steel with shelves (large/ medium/ small), including removing existing unserviceable locking device all as specified and directed.

S&F lock with stainless steel keys in duplicate, Godrej pattern, suitable for Almirah steel (large/ medium/ small), 6 levers, 65 mm size, including removing existing unserviceable lock all as specified and directed.

S&F handle with grip, mild steel chromium plated, 90 mm size, suitable for Almirah steel (large/ medium/ small), including removing existing unserviceable handle all as specified and directed.

S&F hasp and staple, mild steel chromium plated, 75 mm size, suitable for locker steel, duly riveted with suitable size rivets including removing existing unserviceable hasp and staple all as specified and directed.

M&L for bow handle, mild steel chromium plated, 100 mm size, suitable for steel locker drawer including removing the existing unserviceable handle all as specified and directed.

S&F PP base with 5 Nos. wheel arrangements for chair revolving including taking down unserviceable base of any description all as specified and as directed.

S&F center tilt gas lift mechanism for chair revolving including taking down unserviceable mechanism of any description all as specified and as directed.

S&F superior quality cushion foam and tapestry cloth for seat of chair revolving including taking down unserviceable cushion and upholstry of any description all as specified and as directed. Note: Cost of tapestry cloth shall not be less than Rs. 350/- per running metre.

S&F superior quality cushion foam and tapestry cloth for back rest of chair revolving including taking down unserviceable cushion and upholstry of any description all as specified and as directed. Note: Cost of tapestry cloth shall not be less than Rs. 350/- per running metre.

S&F hard plastic wheel for chair revolving superior quality all as specified and as directed.

S&F superior quality cushion foam and tapestry cloth for seat and back rest of chair writing including taking down unserviceable cushion and upholstry of any description all as specified and as directed. Note: Cost of tapestry cloth shall not be less than Rs. 350/- per running metre.

N K CONSTRUCTION

KASTURILAL HARICHAND OHRI AND SONS