REPAIR AND POLISHING TO ALL TYPE OF WOODEN FURNITURE UNDER BSO NORTH MEERUT CANTT

Amount

TABLE 900X 600X 760 MM WITH OR WITHOUT DRAWER :- FD-283 & 284 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF TABLE 900X600X760 MM WITH OR WITHOUT DRAWER REST ALL AS DIRECTED BY ENGR-IN-CARGE AND FINAL AS PER SPECIFICATION OF DRG (A) REPLACMENT OF LEG AS PER SPECIFICATION GIVEN IN DRG

(B) REPLACMENT OF LONG RAIL AS PER SPECIFICATION GIVEN IN DRG

(C ) REPLCAMENT OF SHORT RAIL AS PER SPECIFICATION GIVEN IN DRG

(D) DRAWERS MADE AS PER DRG FOR TABLE 900 X 600 X 760 MM WITH DRAWER

(E) REPLACMENT OF HARD PVC SHOES OF APPROVED QUALITY SHALL BE FIXED TO THE BOTTOM OF THE LEGS WITH 20 MM LONG SCREW WOOD STEEL ISI MARKED

(F) REPLACMENT OF TOP WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(G) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE 900 X 600X 760 MM WITH DRAWER BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

(H) M& L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE 900 X 600 X 760 MM WITHOUT DRAWER BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

TABLE DINNING S/TOP 6/8 PERSONS:- FD-273 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF TABLE DINNING 6/8 PERSONS REST ALL AS DIRECTED BY ENGR-IN-CARGE AND FINAL AS PER SPECIFICATION OF DRG (A) REPLACMENT OF LEG AS PER SPECIFICATION GIVEN IN DRG FOR 6/8 PERSONS

(B) REPLACMENT OF LONG RAIL AS PER SPECIFICATION GIVEN IN DRG IN DRG FOR 6/8 PERSONS

(C) REPLCAMENT OF SHORT RAIL AS PER SPECIFICATION GIVEN IN DRG IN DRG FOR 6/8 PERSONS

(D) REPLACMENT OF TOP WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE (table dinning 6 persons)

(E) REPLACMENT OF HARD PVC SHOES OF APPROVED QUALITY SHALL BE FIXED TO THE BOTTOM OF THE LEGS WITH 20 MM LONG SCREW WOOD STEEL ISI MARKED

(F) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE DINING 6 PERSONS BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

STOOL DRESSING :- FD-252 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF STOOL DRESSING REST ALL AS DIRECTED BY ENGR-IN-CHARGE AND FINAL AS PER SPECIFICATION OF DRG (A) REPLACMENT OF LEG AS PER SPECIFICATION GIVEN IN DRG

(B) REPLACMENT OF UNSV LONG RAIL AS PER DRG

(C) REPLCAMENT OF UNSV SHORT RAIL AS PER DRG

(D) REPLACMENT OF UNSV STIFFNERS AS PER DRG

(E ) REMOVING OF OLD UNSV/TURNOUT PLASTIC CANE FROM STOOL DRESSING AND M&L FOR PREPARATION OF SURFACES FILLING THE CRACKS, TIGHTNING THE FRAME BY PROVIDING THE FEVICOL PUTTING WOODEN NAILS WHERE NECESSARY AND RECANNING THE SAME WITH NEW WHITE PLASTIC CANE OF 2 MM WIDE AND 0.4MM THICK 1/2 ROUND OVAL SHAPE AND BEADING ALL AROUNG WITH 3 MM WIDE AND 0.4MM THICK RECANNING SHALL BE DONE AS PER GODREJ PATTERN AS SHOWN IN DRG OR AS DIRECTED BY ENGR-IN-CHARGE

(f) M&L FOR REMOVING THE EXISTING OLD POLISH FROM STOOL DRESSING BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

TEAPOY :- FD-232 & FD 382 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF TEAPOY REST ALL AS DIRECTED BY ENGR-IN-CHARGE AND FINAL AS PER SPECIFICATION OF DRG (A) REPLACMENT OF LEG AS PER SPECIFICATION GIVEN IN DRG

(B) REPLACMENT OF LONG RAIL AS PER SPECIFICATION GIVEN IN DRG

(C ) REPLCAMENT OF SHORT RAIL AS PER SPECIFICATION GIVEN IN DRG

(D) REPLACMENT OF STIFFNER AS PER SPECIFICATION GIVEN IN DRG

(E) REPLACMENT OF HARD PVC SHOES OF APPROVED QUALITY SHALL BE FIXED TO THE BOTTOM OF THE LEGS WITH 20 MM LONG SCREW WOOD STEEL ISI MARKED

(F) REPLACMENT OF TOP WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(G) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TEAPOY BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

TABLE CENTRE :- FD-274 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF TABLE CENTRE REST ALL AS DIRECTED BY ENGR-IN-CHARGE AND FINAL AS PER SPECIFICATION OF DRG (A) REPLACMENT OF LEG AS PER SPECIFICATION GIVEN IN DRG

(B) REPLACMENT OF LONG RAIL AS PER SPECIFICATION GIVEN IN DRG

(C ) REPLCAMENT OF SHORT RAIL AS PER SPECIFICATION GIVEN IN DRG

(D) REPLACMENT OF HARD PVC SHOES OF APPROVED QUALITY SHALL BE FIXED TO THE BOTTOM OF THE LEGS WITH 20 MM LONG SCREW WOOD STEEL ISI MARKED

(E) REPLACMENT OF TOP WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(F) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE CENTRE BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

TABLE BED SIDE :- FD-28M & FD-276 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF TABLE BED SIDE REST ALL AS DIRECTED BY ENGR-IN-CHARGE AND FINAL AS PER SPECIFICATION OF DRG (A) REPLACMENT OF U/S BACK SIDE OF TABLE BED SIDE MADE FROM 6 MM PLYWOOD COMMERCIAL SIZE (440MMX390MM)

(B) REPLACMENT OF UNSV BOTTOM OF TABLE BED SIDE MADEOF 18 MM THICK MDF PRELAMINATED PARTICLE BOARD EXTERIOR GRADE REST ALL AS PER DRG

(C ) REPLACEMENT OF UNSV LEGS & M&L LEGS MADE FROM 1 ST CLASS TEAK WOOD WELL SEASONED AS PER SPECIFICATION GIVEN IN DRG

(D) REPLACMENT OF TOP WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(F) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE BED SIDE BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

TABLE DRESSING LADY WITH MIRROR :- FD-378 SUPPLY AND REPLACMENT OF FOLLOWING UNSERVICABLE PARTS OF TABLE DREESING LADY (INCLUDING DISMANTLING UNSV PARTS WITHOUT DAMAGING OTHER ADJACENT PART) ALL AS PER SPECIFICATION OF DRG (A) REMOVING OF UNSV LOOKING MIRROR ALONG WITH WOODEN FRAME FROM TABLE DRESSING LADIES S&F NEW APPROVED QUALITY ELECTRO COPPER PLATED SHEET GLASS MIRROR OR SIZE 1220MMX 365MMX5MM DULY FIXED IN WOODEN FRAME MADE OF TEAK WOOD AND BACK OF 6 MM THICK COMMERCIAL PLYWOOD ISI MARKED

(B) REPLACMENT OF SLIDING GLASS SHUTTERS SHALL BE OF 5 MM THICK GLASS SHALL BE RUN ON WHEEL AND ALL AS PER DRG AND DIRECTED BY ENGR-IN-CHARGE.

(C ) REPLACMENT OF TOP OF TABLE D/L/M WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(D ) REPLACMENT OF BOTTOM OF TABLE D/L/M WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(E ) REPLACMENT OF BACK FOR TABLE DRESSING LADIES SHALL BE OF 6 MM THICK COMMERCIAL PLY ISI MARKED WITH AND INCLUDING 1 M M THICK PLASTIC LAMINATED SHEET SHALL BE PASTED WITH FEVICOL OVER THE PLY AND ALL AS PER DRG AND DIRECTED BY ENGR-IN-CHARGE

(F) REPLACEMENT OF LEGS MADE FROM 1 ST CLASS TEAK WOOD ( 100MM X 50MM) ALL AS PER DRG

(G) REPLACMENT OF SIDE OF TABLE D/L/M WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(H) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE D/L/M SIDE BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

CHAIR WRITING :- FD-280 (A) REMOVAL OF OLD UNSV FRONT LEG OF CHAIR WRITING S&F NEW LEG MADE TO SHAPE OF 1 ST CLASS TEAK WOOD WELL SEASONED ALL AS PER DRG INCLUSIVE POLISHING WITH FRENCH POLISH

(B) REPLACMENT OF STIFFNERS SHALL BE MADE OUT OF1 ST CLASS TEAK WOOD WELL SEASONED ASPER SPECIFICATION GIVEN IN DRG

(C ) REPLACMENT OF ARM REST SHALL BE MADE OUT OF1 ST CLASS TEAK WOOD WELL SEASONED ASPER SPECIFICATION GIVEN IN DRG

(D) REMOVAL OF OLD UNSV REAR LEG OF CHAIR WRITING S&F NEW LEG MADE TO SHAPE OF 1 ST CLASS TEAK WOOD WELL SEASONED ALL AS PER DRG INCLUSIVE POLISHING WITH FRENCH POLISH

(E ) REMOVING OF OLD UNSV/TURNOUT PLASTIC CANE FROM CHAIR WRITING AND M&L FOR PREPARATION OF SURFACES FILLING THECRACKS, TIGHTNING THE FRAME BY PROVIDING THE FEVICAOL PUTTING WOODEN NAILS WHERE NECESSARY AND RECANNING THE SAME WITH NEW WHITE PLASTIC CANE OF 2 MM WIDE AND 0.4 MM THICK 1/2 ROUND OVAL SHAPE AND BEADING ALL AROUND WITH 3 MM WIDE AND 0.4MM THICK RECANNING SHALL BE DONE AS PER GODREJ PATTERN AS SHOWN IN DRG OR AS DIRECTED BY ENGR-IN-CHARGE

(F) M&L FOR REMOVING THE EXISTING OLD POLISH FROM CHAIR WRITING BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

(G) REPLACMENT OF BACK REST SHALL BE MADE OUT OF 1 ST CLASS TEAK WOOD WELL SEASONED AS PER SPECIFICATION GIVEN IN DRG

BED PLYWOOD / BED HARD :- FD-245 & FD-246 & FD-247 (A) REMOVING BED HARD OF EXISTING U/S HEAD SIDE BOARD FROM BED PLY WOOD, SUPPLY AND FIXING NEW HEAD SIDE BOARD MADE OUT OF 1 ST CLASS TEAK WOOD WITH IN 4MM THICK PLYWOOD IN SIDE COMMERCIAL VEENERED ISI MARKED BWR GRADE AND TEAK WOOD BEADING 6 MM THICK ALL AROUND SHALL BE PASTED WITH FEVICOL AND NAILS REST ALL AS PER DRG AND DIRECTED BY ENGR-IN-CHARGE

(B) REMOVING OF EXISTING U/S FOOT REST FROM BED PLY WOOD, SUPPLY AND FIXING NEW FOOT SIDE BOARD MADE OUT OF 1 ST CLASS TEAK WOOD WITH IN 4 MM THICK PLYWOOD IN SIDE COMMERCIAL VEENERED ISI MARKED BWR GRADE AND TEAK WOOD BEADING 6 MM THICK ALL AROUNG SHALL BE PASTED WITH FEVICOL AND NAILS REST ALL AS PER DRG AND DIRECTED BY ENGR-IN-CHARGE

(C) REMOVAL OF UNSV LONG RAIL, SUPPLY AND FIXING NEW LONG RAIL MADE OUT OF 1 ST CLASS TEAK TO SHAPE AND DIMENSION AS PER DRG

(D) REMOVAL OF UNSV SHORT RAIL, SUPPLY AND FIXING NEW SHORT RAIL MADE OUT OF 1 ST CLASS TEAK TO SHAPE AND DIMENSION AS PER DRG

(E) M&L FOR REMOVING THE EXISTING OLD POLISH FROM BED HARD BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

(F) REMOVAL OF UNSV LEG, SUPPLY AND FIXING NEW LEG MADE OUT OF 1 ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

(G) REPLACMENT OF THE DAMAGED WORN OUT TOP OF THE BED WHICH IS TO BE MADE UP OF PLYWOOD COMMERCIAL 12 MM THICK 5 PLY BWR GRADE CONFIRMING TO IS 303-1989 IN ONE PIECE AFTER TAKING DOWN THE OLD ONE AND TO BE FIXED WITH 35 MM LONG SCREW WOOD STEEL ISI MARKED ALL AS SPECIFIED IN DRG OR AS DIRECTED BY ENGR- IN -CHARGE.

TABLE PEG :- FD-384 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF TABLE PEG REST ALL AS DIRECTED BY ENGR-IN-CHARGE AND FINAL AS PER SPECIFICATION OF DRG (A) REPLACMENT OF TOP WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(B) REMOVAL OF UNSV LONG RAIL, SUPPLY AND FIXING NEW LONG RAIL MADE OUT OF 1 ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

(C) REMOVAL OF UNSV SHORT RAIL, SUPPLY AND FIXING NEW SHORT RAIL MADE OUT OF 1 ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

(D) REMOVAL OF UNSV LEG, SUPPLY AND FIXING NEW LEG MADE OUT OF 1 ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

(E) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE PEG BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

TABLE 900X900X760MM :- FD-88 & FD-291 SUPPLY AND FIXING FOLLOWING NEW PARTS MADE OF WELL SEASONED 1ST CLASS TEAK WOOD TRUE PLANNED ,CUT TO SHAPE AS PER DIMENSIONS SHOWN ON DRG INCLUDING DISMENTELLING UNSERVICABLE PARTS WITHOUT DAMAGING OTHER ADJACENT PARTS OF TABLE 900 X900X760MM REST ALL AS SPECIFIED IN DRG (A) REPLACMENT OF TOP WHICH SHALL BE MADE OUT OF 18 MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4 MM TEAK WOOD BEADING ALL AROUND REST AS DIRECTED BY ENGR-IN-CHARGE

(B) REMOVAL OF UNSV LONG RAIL, SUPPLY AND FIXING NEW LONG RAIL MADE OUT OF 1 ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

(C) REMOVAL OF UNSV SHORT RAIL, SUPPLY AND FIXING NEW SHORT RAIL MADE OUT OF 1 ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

(D) REMOVAL OF UNSV LEG, SUPPLY AND FIXING NEW LEG MADE OUT OF 1 ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

(E) M&L FOR REMOVING THE EXISTING OLD POLISH FROM TABLE 900X900X760MM BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY OF HIGH GLASS POLISH OF SURFACE EXPOSED WHEN PLACE IN IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

(F) REPLACEMENT OF HARD PVC SHOES OF APPROVED QUALITY SHALL BE FIXED TO THE BOTTOM OF THE LEGS WITH 20MM LONG SCREW WOOD STEEL ISI MARKED

(G) REMOVAL OF UNSV STIFFNER, SUPPLY AND FIXING NEW STIFFNER MADE OUT OF 1ST CLASS TEAK WOOD TO SHAPE AND DIMENSION AS PER DRG

HAT STAND WITH MIRROR :- FD -526 (A) REPLACMENT OF LOOKING MIRROR OF SIZE 460MMX300MMX5MM OF AFTER DULY FIXED IN EXISTING BOARD AND EDGNING WITH 4MM THICK TEAK WOOD BEADING REST ALL AS PER DRG AND DIRECTED BY ENGR-IN-CHARGE

(B) REPLACEMENT OF UNSV PEG AND M&L FOR FIXATION OF NEW ALUMINIUM PEG OF 6 "long shall be fied with 1/2" screw rest all as per drg

(C) REPLACEMENT OF FRAME WHICH SHALL BE MADE OUT OF 18MM THICK PRELAMINATED MDF BOARD EXTERIOR GRADE AND WITH THICK 4MM TEAK WOOD BEADING LL AROUND DULY REST AS DIRECTED BY ENGR-IN-CHARGE

(D) M&L FOR REMOVING THE EXISTING OLD POLISH FROM HAT STAND WITH MIRROR BY SCRAPING WITH EMPERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRCTED BY ENGR-IN-CHARGE

CHAIR EASY :- FD-229 (A) REMOVAL OF OLD UNSV FROT LEG OF CHAIR EASY S&F NEW LEG MADE OF SHAPE OF 1ST CLASS WOOD WELL SEASONED ALL AS PER DRG INCLUSIVE POLISHING WITH FRENCH POLISH

(B) REPLACEMENT OF ARM REST SHALL BE MADE OUT OF 1ST CLASS TEAK WOOD WELL SEASONED AS PER SPECIFICATION GIVEN IN DRG

(C) REMOVAL OF OLD UNSV REAR LEG OF CHAIR EASY S&F NEW LEG MADE TO SHAPE OF 1ST CLASS TEAK WOOD WELL SEASONED ALL AS PER LEG

(D) REMOVING OF OLD UNSV / TURNOUT PLASTIC CANE FROM CHAIR EASY AND M&L FOR PREPARATION OF SURFACE FILLING THE CRAKS, TIGHTNING THE FRAME BY PROVIDING THE FEVICOL POUTTING WOODEN NAILS WHERE NECESSARY AND RECANNING THE SAME WITH NEW WHITE PLASTIC CANE OF 2MM WIDE AND 0.4MM THICK 1/2 ROUND OVAL SHAPE AND BEADING ALL AROUND WITH 3MM WIDE AND 0.4MM THICK RECANNING SHALL BE DONE AS PER GODRE JPATTERN AS SHOWN IN DRG OR AS DIRECTED BY ENGR-IN-CHARGE

(E) REMOVAL OF OLD UNSV RAIL OF SEAT / BACK OF CHAIR EASY S&F NEW RAIL MADE TO SHAPE OF 1ST CLASS TEAK WOODEN WELL SEASONED ALL AS PER DRG INCLUSIVE POLISHING WTH FRENCH POLISH

(F) M&L FOR REMOVING the existing old polish from chair easy by scraping with emery paper to make the surface smooth and fill the cracks and pores with sam sam putty and apply two coats of french polish of approved quality high gloss polish of surface exposed when place in position as specified and directed by Enger-in-Charge

CHAIR DINING :- FD-279 (A) REMOVAL OF OLD UNSV FRONT LEG OF CHAIR DINING S&F NEW LEG MADE TO SHAPE OF 1ST CLASS TEAK WOOD WELL SEASONED ALL AS PER DRG

(B) REMOVAL OF OLD UNSV REAR LEG OF CH AIR DINING S&F NEW LEG MADE TO SHAPE OF 1ST CLASS TEAK WOOD WELL SEASONED ALL AS PER DRG

(C) REMOVAL OF OLD UNSV BACK REST OF CHAIR DINING S&F NEW BACK REST MADE TO SHAPE OF 1ST CLASS TEAK WOOD WELL SEASONED BACK REST ALL AS PER DRG

(D) REMOVAL OF OLD UNSV STIFINER OF CHAIR DINING S&F NEW STIFFENER MADE TO SHAPE OF 1ST CLASS TEAK WOOD WELL SEASONED ALL AS PER DRG

(E) REMOVAL OF OLD UNSV FRONT RAIL OF CHAIR DINING S&f NEW FRONT RAIL MADE TO SHAPE OF 1ST CLASS TEAK WOOD WELL SEASONED ALL AS PER DRG

(F) REMOVAL OF OLD UNSV SIDE RAIL OF CHAIR DINING S&F NEW SIDE RAIL MADE TO SHAPE OF 1ST CLASS TEAK WOOD WELL SEASONED ALL AS PER DRG

(G) REPLACEMENT OF HARD PVC SHOES OF APPROVED QUALITY SHALL BE FIXED TO THE BOTTOM OF THE LEGS WITH 20MM LONG SCREW WOOD STEEL ISI MARKED

(H) REMOVING OF OLD UNSV / TURNOUT PLASTIC CANE FROM CHAIR DINING AND M&L FOR PREPARATION OF SURFACE FILLING THE CRACKS, TIGHTNING THE FRAME BY PROVIDING THE FEVICOL PUTTING WOODEN NAILS WHERE NECESSARY AND RECANNING THE SAME WITH NEW WHITE PLASTIC CANE OF 2MM WIDE AND 0.4MM THICK 1/2 ROUND OVAL SHAPE AND BEADING ALL AROUND WITH 3MM WIDE AND 0.4MM THICK RACANNING SHALL BE DONE AS PER GODREJ PATTERN AS SHOWN IN DRG OR AS DIRECTED BY ENGR-IN-CHARGE

(J) M&L FOR REMOVING THE EXISTING OLD POLISH FROM CHAIR DINING BY SCRAPING WITH EMERY PAPER TO MAKE THE SURFACE SMOOTH AND FILL THE CRACKS AND PORES WITH SAM SAM PUTTY AND APPLY TWO COATS OF FRENCH POLISH OF APPROVED QUALITY HIGH GLOSS POLISH OF SURFACE EXPOSED WHEN PLACE IN POSITION AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

CUSHION SET FOR SOFA SET 5 SEATER :- FD-373 REMOVAL OF OLD UNSV CUSHION AND S&F NEW CUSHOIN OF SIZE 22"X21"X4" THICK 4 HD OF MAKE : SLEEPWELL / KURLON COVERED WITH SUPERIOR QUALITY TAPESTRY CLOTH FOR SEAT AND BACK OF SOFA SET 4/5 SEATER. TEPESTRY CLOTH SHOULD BE NOT LESS THAN RS 350/- PER METER DULY APPROVED BY GE REST ALL AS PER DRG AND DIRECTED BY ENGER-IN-CHARGE

TABLE WRITING :- FD-275 ALL AS PER ITEM NO 91 BUT FRENCH POLISHING TO TABLE WRITING

Garga Traders

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD