REPAIR TO DRAIN PATHS HARD STANDING CULVERT AND OTHER MISC WORKS AT VARIOUS LOCATIONS UNDER AGE BR II OF GE AF ADM AREA AT AF STATION AGRA

Amount

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 02 above but except Bricks NOTE: Old brick retrieved from demolition shall be used.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete including demolition of existing concrete complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channels and drains including formwork and demolition of cement concrete as in floor complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves etc and similar works set in cement mortar 1:6 including demolition of cement concrete complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour, area of stone exceeding 0.25 sqm but not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm x 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness(below or above ground level) complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor etc. complete all as specified and directed.

M&L for machine pressed rubber moulded coloured chequered cement concrete tiles 30cmx30cmx25mm thick, with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor etc. complete all as specified and directed.

M&L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, excavation, returning filling and demolition of existing kerb stones complete comlete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of concrete and applying two coats of synthetic enamel paint over a coat of priming plaster coat complete all as specified and directed.

S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and laid in treanch complete all as specified and directed.

M&L for removal of old enamel paint, any number of coats, any width or grith, cleaning with scrapes of old concrete surface and applying two coats of synthetic enamel paint over a coat of priming plaster coat complete all as specified and directed.

M&L roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and applying neat cement slurry @ 3 kg of cement per Sqm and applying a topping layer of 25 mm thick PCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in flooring complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm thick in cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster/washed stone grit complete all as specified and directed.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove with applying one coat of approved paint complete all as specified and directed.

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even & smooth without using extra cement complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 Sqm etc on newly prepared surface of brick (plastered or unplastered surface) or concrete surface complete all as specified. Note :- (i) Primer and emulsion to be carried out through air less spray machine (mechanial means). (ii) Second coat will be applied after first coat is completely dried i.e approximately 6-8 Hrs after applying of first coat.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004 alkali and fungal resistance, dirt resistance exterior emulsion paint of required shade (Company Depot tinted) with silicon addtitives @ 1.43 litre/10 Sqm on old prepared surface of brick (plastered or unplastered surface) or concrete surface complete all as specified. Note :- (i) Emulsion to be carried out through air less spray machine (mechanial means). (ii) Second coat will be applied after first coat is completely dried i.e approximately 6-8 Hrs after applying of first coat.

M&L for 75mm thick cement concrete type C1 1:3:6 (using 20 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction including demolition of existing plinth protection complete all as specified and directed.

Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 25 mm thick Cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in sub base of floor etc. complete all as specified and directed.

M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone 18 to 22 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 15 mm thick in cement mortar 1:4 finished rough to fix stone and taking down existing plaster complete all as specified and directed.

M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement sheet (corrugated, semi corrugated etc) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement sheet/ridge (corrugated, semi corrugated etc) complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

S&F framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) including dismantling existing steel work complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for welding in repair exc. 2.5 cm but not exc. 5 cm in length, thickness of metal to be welded exc. 6 mm but not exc. 9 mm complete all as specified and directed.

Excavation in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Returning filling in including spreading watering and well raming in layer excedding 25 cm each in soil complete all as specified and directed.

Removing excavated soil to a distance not excedding 50m and deposited where directed at a level not excedding 1.5m above the starting point.

M&L cleaning and desludging of drains cross sectional area not exc. 0.50 Sqm and average depth of debris/sludge not exc. 45 cm including removing out all debris/sludge/earth/building material/ rubbish and leaves/ grass/ bushes from the drain and disposal of debris upto 100 m distance complete all as specified and directed at site.

S&F in repair providing precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in louvers and jallies, 25 mm thick (measured solid), including all mouldings frame but excluding frames including necessary form work, set in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

Cleaning and opening of road/path culvert of length not exc 6 m and cross sectional area not exc. 2 Sqm including removing out all debris/ sludge/ earth/ building material/ rubbish and leaves/grass/bushes from the culvert and disposal of debris in low lying area complete all as specified and directed at site.

S&F in repair fiber glass reinforced translucent plain sheet 2 mm thick fixed as in gate nad the like fixed with suitable size of nut, bolt and washers or 'L'/ 'J' Hook complete all as specified and directed.

Captainkomalchaharconstructions

GIRENDRA SINGH AND CO

M/s K S Builders

Rakesh Kumar

BHULLAR CONSTRUTION COMPANY