BIRED/28/e-NIQ(1st call) of 2025-2026

SUB-HEAD 1--DISTRIBUTION WIRING. Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand polycab/Finolex/RR cable/Havells) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire do---do---do on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]. Average run 9 Mtr. [4(c)/E-25]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand polycab/Finolex/RR cable/Havells) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand Legrand/crabtree/Anchor/roma) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. On Board [3(a)/E-24]

SUB-HEAD 2--CUTTING CHANEL & WIRE LAYING. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 20 mm size [ 7(a)/ E- 16 ]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand polycab/Finolex/RR cable/Havells) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. i) 3 x(1.5 sqmm) [ 1(b) /E- 9]

ii) 2x(2.5sqmm) + 1x(1.5sqmm) as ECC [ 1(s) /E- 9]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. 100 mm x 100 mm x 65 mm [11(a)/E-4]

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required 100 mm x 100 mm x 65 mm [12(a)/E-4]

SUB-HEAD 3--SPNDB ,SFU, Plug Socket, etc. Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. 2+8 Way[ Legrand ] [ 13 / D- 9 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of EIC. ] 40 A DP [ 6 / D- 5 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS (Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. 6-32 SP [ 7 / D- 6]

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 63A [ 4(a) / D- 3]

Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting. 63/125 A [ 5 / D- 5]

SITC of Out Door waterproof type Kiosk box for S.P.N.D.B protection fabricated by 14 SWG (2.0 mm) nominal thickness, size 600 mm x 600 mm x 250 mm (9.2 kg / metre) sheet steel for framework and covers, and 5mm nominal thickness for gland plates, including cleaning and finishing complete with single door, with locking arrangement, good quality dust, damp and vermin proof rubber gaskets including painting with anticorrosive paint on wall or muffing as required / As per Choice of EIC. providing MS Flat of 40mm x 4mm for housing the SPNDB & Switch Board on it and the kiosk box must be installed on angle iron frame of 50x50x5 mm to be housed on wall by drilling the wall and mending good damages.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand Anchor Roma/Legrand Mylink/ Crabtree) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(b)/E-19]

SUB-HEAD 4-- SUPPLY & FIXING OF LIGHT FITTINGS. Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps as per GS.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [ 16 /C-2]

Supply and delivery of twin Industrial type LED luminaries with aluminium extrusion heat sink incl. Supply of 2nos. 18W LED Tube with LED Batten. [Make- SURYA , 2xT-8 cat no.- SLE TL DS 18 P AL EXT & SUB 218 T8 LED or equivalent Philips/ CG / Bajaj / Wipro/Havells ] Philips(TMC 502 2X T-LED 22 W/865 T81 - 2100lm )

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [ 22/D-13 ]

Fixing only lamp [11/C-2]

Supply of 9W LED bulb ( Bajaj/ CG/ Philips/ wipro/Surya) on existing batten holder

SUB-HEAD 5--FIXING OF FANS. Fixing only 12" exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: [ 28(b)/C-4 ]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mmdia x 62 mm long) (12") [ 32(a)/D-14 ]

SUB-HEAD 6--SUPPLY OF FANS. Supply of Exhaust fans complete with all accessories having the following Model ( Make -EPC ) 12"( 300mm ) Speed 1370 RPM

SUB-HEAD 7 Supply & Laying of Cable, Socket. Supply & delivary of 1.1KV grade 3 core 10 sq. mm. multy stranded alluminium conductor Armoured cable. [Make- RR Kabel/ Havells / Polycab/ KEI ].

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below 3 Core 10 Sq. mm [7(b)/F-4 ]

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 Nos. bricks per Mtr. as per GS.

Laying of cable as below, after cutting floor /pavement / wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Incl. following size GI [Hot Dip] Wire as Earthing as per GS.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [ 2(b)/ F- 1 ]

Supplying & Fixing solderless Copper socket by crimping of Copper wires. a) 1.5 sq mm

b) 2.5 sq mm

c) 10 sq mm

SUB-HEAD 8 -- EARTHING Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:ISI-Medium GI pipe as per GS [ 2(a)/G-1]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) [1(a)/G-1]

Connecting the equipments body to earth busbar including S &F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [d/G-3]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2]

Please Enable Macros to View BoQ information