REPAIR/ROUTINE MAINT OF 27 NOS ELECTRIC LIFTS MAKE ESCON 08 13 PS OF G 14 STOREY BUILDING AT NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Part-1 Repair/maintenacne of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Note : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell i.e. R-12 building . New Navy Nagar for receiving the complaints at round the clock daily including sunday and holiday.(iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell.

(a) 13 PS lifts (884 Kgs ) in bldg (G+14) R-4, R-5, R-6, R-7, R-9, R-10, R-11'A' & 'E' Wing, R-12, R-13, R-25'A' & 'E' Wing (Total 12 Nos lift).

8 PS (544 Kg) capacity G+14 storey R-4, R-5, R-7, R-13, Makar, Kumbha, R-11'A' wing, R-22'A' & 'E' wing, R-25 'A' & 'E' Wing (Total 11 Nos lift).

29 Passengers ( 2000 Kg) capacity in bldg(G+14) R- 17, R-18, R-19 ( Total 03 Nos of lift )

Part II Disconnecting and taking out unserviceable COP assembly, Supply and fix new assembly complete with illuminated push button for floor position, alarm, non stop door open, door close, cabin fan, cabin light stop, attend out key etc with direction indicator with LED display with CPI card of stainless steel face plate in and including necessary wiring for illuminating push button complete all as specified and directed by Engineer-in-Charge for G+14 Storey buildings,Lifts.

Replacement of unserviceable cabin fan from car cabin, supply and fix, new cabin fan, non-oscilating type, axial flow, single speed 300mm sweep, 240 volts ISI marked with grill complete all as directed by Engineer-in-Charge. Make:- VBM / CINI

Disconnecting and taking out old/unserviceable shaft wiring, supply and fixing of shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 Volts grade 0.75 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire duly bunched with wire binding locking strip, drawing through in and including galvanished sheet metal trucking of 24 SWG up to ground floor in hoist for control to all function including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch all as specified and directed by the Engineer-in-Charge. for G+14 Storey building.

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers etc complete all as directed by Engineer-in-Charge.in 8/13 /Goods Lift, G+5/G+6/G+16 Storey buildings.Make : USHA MARTIN

Disconnecting and taking out old/unserviceable Governer rope of size 8 mm dia(8/19 Construction) ungalvanised including necessery connection with pully in machine room and shaft pit complete with clamps, nuts bolts, and washers etc, for high rise building for 8/13/Goods lifts

Disconnecting and taking out old/unserviceable travelling cable from hoist way and supply and fix new travelling cable PVC Insulated 16/24 Core with stranded copper conductor, 1100 volts grade of size 0.75 Sqmm conforming to relevant IS including criping with lugs appropriate thimples complete all as specified and directed by Engineer-in-Charge.Make:- Polycab/Finolex/Roliflex

Dismantling and taking out gear box assembly from main machine for repairs/replacement of unserviceable/wornout parts such as worn wheel, worn shaft bushes, thrust bearing and pedest al bearing and necessary packing including overhauling, cleaning alignment of gear box assembly and after repairs/repalcement of wornout part assembly and refixing with existing machine with proper alignment and testing complete etc all as specified and directed by Engineer-in-Charge, for G+14/G+6 storey Bldg,

Dismantling and taking out old un serviceable landing door from various floors & supply and fixing new Landing door comprise of 02 Nos power operated auto centre opening by horizontal sliding stainless steel panel of 16 SWG flush type complete with door headers suitable for (13 PS lifts), including necessary cutting opening in masonry work & making good the disturbed surface to match with the existing R-25 'E' wing complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out old un serviceable landing door from various floors & supply and fixing new Landing door comprise of 02 Nos power operated auto centre opening by horizontal sliding stainless steel panel of 16 SWG flush type complete with door headers suitable for (8 PS lifts), including necessary cutting opening in masonry work & making good the disturbed surface to match with the existing R 25'A' wing, R 13 complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out old unserviceable car door from car cabin and supply and fixing new car door comprises of 02 nos power operated auto centre opening by horizontal sliding stainless sttel panel of 16 swg flush type complete with VVVF door drive unit (Make:Yaskawa Japan,Schindler) with card,Air card,aluminium safety in full length R 25'A' wing, R 13 complete with headers for 8 Ps Lift

Dismantling and tking out old unserviceable car door from car cabin and supply and fixing new car door comprises of 02 nos power operated auto centre opening by horizontal sliding stainless sttel panel of 16 swg flush type complete with VVVF door drive unit (Make:Yaskawa Japan,Schindler) with card,Air card,aluminium safety in full length complete with headers all as specified and directed by Engineer-in-Charge for R-25 'A' wing, capacity 13 Passenger,serving G+14 upper floor.

Dismantling and taking out unserviceable safety edge of any type & supply and fixing new full beam infrared sensor upto full length of car doors (2.00 mtr) as specified and directed by the Engineer-in-Charge. Make :- TLJONES/WECO as approved

Replacement of automatic door drive unit with motor on car top with VVVF of 1 HP capaicity all as specified and directed by Engineer-in-Charge. Make :- Yasakawa / Sneider/Monarch as approved by Engineer- in-Charge

Dismantling and taking out unserviceable old Landing push button box along with illuminated call button with controll wiring supply & fix Landing push button box along with illuminated call button with digital arrow indication with controll wiring, for G+14/G+5/G+6 storey building R-25'A' and 'E' wing, R-13 complete all as directed by Engineer-in-Charge.

Replacement of false ceiling made of stainless steel hair line finish,1.2 mm thick and fitted with aluminium square fan and fan grilll and 06 W LED fittings at four corners, including removing existing (G+4 storey) all as specified and directed by Engineer-in-Charge.

Dismantling & Design, supply, installation of new car cabin with platform alongwith 5mm aluminium Chequred plate, with aluminum sil & centre auto door of 900mm opening in SS Hairline finish of 18 gauge with car door track, alongwith SS false ceiling as per existing size in bldg No R-13 & R-25 all as specified and directed by Engineer-in-Charge consisting of following :-. (i) Type of car cabin - 8 Passenger. (ii) Load capacity - 544 Kgs (iii) Car door type- Centre opening, sliding type, hair line of 18 SWG. (iv) Door opening inside : 800 mm (W) x 2000 mm (H) (v) Car enclosure : Standard manufacturing with MS frame & SS panels, with false ceiling with 04 Nos LED light fitting on ceiling and concealed fan with fan grill. (vi) 3D infra red sensor for safety edge of door for entire height. (vii) Fixing of new COP with overload button and digital car position indicator in COP. (Viii) Safety instruction board in car. (ix) Do's and Don'ts board in car. (x) Emergency telephone numbers board in car. (xi) Flooring : Aluminium Chequered plate 5mm thick complete. (Xii) Replacement of PCB card, relay with control wiring for G+14 Storey Building.

Dismantling & Design, supply, installation of new car cabin with platform alongwith 5mm aluminium Chequred plate, with aluminum sil & centre auto door of 900mm opening in SS Hairline finish of 18 gauge with car door track, alongwith SS false ceiling as per existing size in bldg No R-25 all as specified and directed by Engineer-in-Charge consisting of following :-. (i) Type of car cabin - 13 Passenger. (ii) Load capacity - 884 Kgs (iii) Car door type- Centre opening, sliding type, hair line of 18 SWG. (iv) Door opening inside : 900 mm (W) x 2000 mm (H) (v) Car enclosure : Standard manufacturing with MS frame & SS panels, with false ceiling with 04 Nos LED light fitting on ceiling and concealed fan with fan grill. (vi) 3D infra red sensor for safety edge of door for entire height. (vii) Fixing of new COP with overload button and digital car position indicator in COP. (Viii) Safety instruction board in car. (ix) Do's and Don'ts board in car. (x) Emergency telephone numbers board in car. (xi) Flooring : Aluminium Chequered plate 5mm thick complete. (Xii) Replacement of PCB card, relay with control wiring for G+14 Storey Building.

Dismantling and taking out old archtrave from landing door complete and disposing of the same to outside MD Land complete all as specified and directed by Engineer - in - charge.

M&L for 18mm thick mirror polished black granite slab, machine cut mirror polished cladding with chamfered/rounded edges approved decorative design including necessery PCC work granite slab & jointing in cement slurry and pointed in white cement mixed with pigement to match with shade of granite for lifts architrave at all floors complete all as specified and directed by Engr-in-charge.

Taking down and supply and fix hooter with emergency call announciator working on 12 Volts with audibility 90DB @ 1M distance with complete accessories and alongwith box including connecting cables

Taking down old UNSV Announcement system and supply and install, testing and commissioning of MP3 voice announcement system in the controller and high quality spaeker on car top, with necessery provision of shaft wires and travelling cable complete as specified. The audio indicator shall anounce floor position, ARD made operation, overload announcement etc and continious mild music in hindi and can be programmable for more music. The announcement system shall be in hindi and english.

Replacement of unserviceable ARD conytrol system, commissioning and testing of new ARD System suitable for upto 15 KW motor including wiring with connected items in existing G+14 storey building 8 passanger lift 415V, 50 HZ, 3 phase with a speed of 1.5 mtr/sec comprising with maintenance free battery, Make :- Exide / Amaron to match with the existing capacity motor and controller system complete all as specified and directed by Engr-in-Charge. Make :-MONARCH/ADCON/ESCON. in bldg No R-13

Replacement of unserviceable ARD conytrol system, commissioning and testing of new ARD System suitable for upto 7.5 KW motor including wiring with connected items in existing G+14 storey building 8 passanger lift 415V, 50 HZ, 3 phase with a speed of 1.5 mtr/sec comprising with maintenance free battery, Make :- Exide / Amaron to match with the existing capacity motor and controller system complete all as specified and directed by Engr-in-Charge. Make :-MONARCH/ADCON/ESCON. in bldg No R- 25 ( A & E Wing)

Monarch Enterprises