Regarding the supply of various type of materail at gp Dhamangaon Badhe

Amount

Laying and Jointing PVC Pipe. Heading

SS Skid-The Basic assembly of RO is mounted on ther skid The quality of the skid is made of stainless steel 304

PVC Tank -the filtered product water is store in this tank. This tank, too is maded PVC TANK 1000 LIT

PVC Tank -the filtered product water is store in this tank. This tank, too is maded PVC TANK 2000 LIT

Raw Water Pump- The RWP sucks water from the raw water tank & forwards it to the RO system having capacity of 500 lit per Hr. of self priming centrifugal pump its make of CRI/Groundfos .5 to 1Hp power consumption and pressure 3-4 kg per sq cm etc. complete

Pressure sand Filter-Pressure sand filter is of diameter 13 inches and 54 inches in height having volume of 110liters (pentair) made up of FRP its opraration type is manual maltiport valves etc. complete

Pressure Carbon Filter-pressure carbon fillter is of vartical type of diameter 13 inches and 54 inches in height having of 110liters (pentair) made up of FRP its opraration type is manual multiport valves etc. complete

Anti Scalnt Dosing System -Having pump in a set made of edose it is electronic diaphrgm type its capacity is 0.3 liter per minute. Having one HDPE / plastic tank capacity 80 liters.

Cartidge Jumbo Filter Housing -Cartidge jumbo filter Housing in two numbers made of food grade PP and diamentions are 20''x4''

Jumbo Micron cartidge filter 2 Nos- it is made of poly propylene and having flow rate is 5000 lit its diamentions are 20''x4'' its rating is 5 micron in 2 Nos

High Pressure Pump - it has the powerof 3 HP it is vertical centrifugal multistage pump make of CRI/CNP/Shakti HPP sucks water from the micron filter & passes it to the membrance.

Pressure Tube - RO module consisting of membrane housing with RO membrane mounted on skid it is made of ecoline (penteir) UKI/SS its size is 8''x40'' in a one number

Membrane - The membrane contains miute holes of size 0.0001 micron.As a result no bacteria or any virus can pass through this it its TFC polymide and size is 8'' diamter and 40''lenth make of hydronautics CPA-2 Equivalent

Flow Indicator - Flow indicators in two numbers made up of flot type pannel mountedits max temp 40 degree cal. And measured at RO Module Product Flow and RO Module Reject Flow.

Pressure Gauge - Pressure gauge are in two nos and range in between 0 to 20 kg/sq cm its location are at RO module inlet and RO Module Reject Flow

High Pressure Switch and Low Pressure Switch - These are in two numbers locations are one before high pressure pump and onather is after.

Prssure controlled valve - It is situated at reject water line

Flashing Switch with solenoid valve

Electronic panel board - The mains supply is connected to the panel board. The RO is controlled by the panel board.

Water Dispenser Machine (Coin Box) aster make with digital panel & control sensor

Supplying of water controller sensor (flot type) at site as directed by in change of work

Supplying of multiport valve mannually oprational required for the pressure sand filter including all charges of work

Providing and fixing on walls /ceilling /floors, medium C.P.V.C (chlorinated poly vinyl chloride) pipe having embossed ISI markon it, required diameter with screwed/ plain sockets, joints, necessary C.P.V.C. and brass fittings such as sockets, back nuts, elbows,bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs, etc.and remaking good the demolished portion to restore the same in orignal condition neatly and providing and applying anticorrosive primer and two coats of oil painting, testing, etc. complete, (prior approval of sample and brand by Ex. Engineer is necessary before use). 25mm

Providing and fixing on walls /ceilling /floors, medium C.P.V.C (chlorinated poly vinyl chloride) pipe having embossed ISI markon it, required diameter with screwed/ plain sockets, joints, necessary C.P.V.C. and brass fittings such as sockets, back nuts, elbows,bends, tees, reducers, enlargers, plugs, clamps etc. including necessary drilling holes in walls, slabs, etc.and remaking good the demolished portion to restore the same in orignal condition neatly and providing and applying anticorrosive primer and two coats of oil painting, testing, etc. complete, (prior approval of sample and brand by Ex. Engineer is necessary before use). 32mm

Providing and fixing Ball cock medium type with PVC float including sockets and necessary fittings and tasted as per municipal requirement, testing, etc. complete.(prior approval of sample and brand by Ex Engineer before use.) 40mm

Providing for purchase of water chiller consisting of kirloskar make compressor of 2 Tone and chilar plate (PHE) of alf/danfos make with condensor fan motor elector accessories and R22 Gas and Having GI Body including all Charges etc complete.

Providing for purchase of water chiller consisting of kirloskar make compressor of 3 Tone and chilar plate (PHE) of alf/danfos make with condensor fan motor elector accessories and R22 Gas and Having GI Body including all Charges etc complete.

Providing for purchase of Stabilizer for Water chillar for Capasity 3 Tone Overload Protection,Metal material, 12 A capacity, 4 - 6 Sec. initial time delay

Origin Enterprises

Arch InfoTech