Renovation of Conference Hall and other work at MPPCB, Bhopal

Amount

Providing and fixing tiled false ceiling of specified materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for serviceslike diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and grid system used together should give a 15 year warranty. ( SOR Item No.12.59.5)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25mm long dry wall screws @ 230 mm interval, including fixing of 10mm thick plaster of Paris (gypsum anhydrous) sheet to ceiling section and perimeter channels with the help of dry wall screws of size 3.5x25mm at 230mm interval including jointing and finishing to a flush finish of tapered and square edgesof POP board with jointing compound (POP paste) including the cost of making openings for light fittings, grills, diffusers cutouts made with frame of perimeter channels suitably fixed all complete as per drawing, specifications and direction of the Engineer-in-charge.(SOR Item No - 12.58.1) Flat surfaces.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in - charge. In cement mortar. (SOR Item no.- 15.6.3)

Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and upto 40 mm. ( SOR NO.15.11.2)

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead: Thickness above 25 mm upto 40 mm (SOR Item No.15.36.3)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. ( SOR Item No.9.95)

Providing & Fixing of Loft Covering Made up of 18mm thick frame work. Loft Cover with Openable Shutters made up of 18mm thick ply finished with 1.0mm thick laminate from outside & 0.8mm thick laminate from inner face of ply. Shutter is fix with the help of hinges. item includes all necessary hardware complete etc.(NON SOR)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) ( SOR Item No. 21.1.1.2)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofPowder coated aluminium (minimum thickness of powder coating 50 micron) ( SOR Item NO. 21.1.2.2)

Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. ( SOR Item No. 21.2.2 )

Providing & Fixing of glazing inaluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) ( SOR Item No. 21.3.2 )

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge. Anodized (AC15 ) aluminium ( SOR Item No. 21.16.1 )

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.( SOR Item No. 21.13 )

Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete ( SOR Item No. 9.76 )

Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete.60 mm long ( SOR Item No. 9.28.5 )

Providing & Fixing stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete (125x64x2.50 mm) ( SOR Item No. 9.74.1 )

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately).Sal wood ( SOR Item No. 9.1.2 )

Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. Marine plywood conforming to IS: 710 ( SOR Item No. 9.133.1)

Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick. ( SOR Item No. 9.134.2 )

SOFA CENTRE TABLE WOODEN (900mm x 900mm) Providing and fixing Centre table made out of 50mm x 50mm Teak wood legs with outer frame made out of 40mmx75mm second class teak wood with 12mmx12mm groove all around to accommodate 12mm Coloured glass of approved shade on Top.Melamine polish of approved shade & texture on all wooden & veneer surfaces.Work include all labour, material, etc. complete and nothing will be paid extra for execution of the item. All work is to be executed as per the direction and approval of Engineer in charge .( NON SOR)

SOFA CORNER TABLE WOODEN (600mm x 600mm x 450mm) Providing and fixing Centre table made out of 50mm x 50mm second class Teak wood legs with outer frame made out of 40mmx75mm second class teak wood with 12mmx12mm groov all around to accommodate 12mm Coloured/Plain glass of approved shade on Top. .Melamine polish of approved shade & texture on all wooden & veneer surfaces.Work include all labour, material, etc. complete and nothing will be paid extra for execution of the item. All work is to be executed as per the direction and approval of Engineer in charge .( NON SOR)

Storage Cabinet/overhead cabinet (In Mica)- 450mm deep. Providing & fixing Cabinet - Basic Structure/frame of cabinet is made out of 18mm thick commercial Ply board with 12mm ply on back side to be screwed to the existing position on wall with vertical partition of 18mm ply at centre/ and having horizontal open shelves as per design, supported on S.S. brakets/Fixed on side vertical Boards.All external exposed surfaces of 18mm thick Comm. ply board is to be laminated with 1.0 mm thick laminate & All internal surfaces is finished with o.8mm thick liner laminate of approved quality, make and color. All Edges of Ply Board is to be protected by fixing 6mm thick T.Wood beading/2mm thick PVC Lipping/12mm.thick MDF Board. All exposed T.W. beading to be melamine polished/enamel painted as per color scheme. Cabinet will have flaps made of 18mm.thk. comm. ply board laminated from both faces,fixed with the help of SS Hinges and SS Handle as per approval/design. Use favicol S.H. for all joints. The work includes good quality S.S. hinges/albihari hinges, S.S. handle, cluthers, lock, bolts and hardware of approved quality etc complete. ( NON SOR)

Providing and fixing roller blinds Vista/Mascot/windowtech make and shade with hanging and drawing system including all hardware and fixing complete. ( NON SOR)

Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll.( SOR Item No. 11.86.1)

WALL PAPER -Providing & fixing Wall paper on existing smooth surface of Wall/Panelling i/c applying of adhesive & Powder,fixing on wall and matching the Joints /Design pattern as per the approval of the Engineer In charge complete and nothing will be paid extra for execution of the item .This job includes all Leads,lifts for all floor,Material & labour complete and nothing will be paid extra for execution of the item.All work is to be executed as per the design approval and directions . Surface area will be measured for payment.(NON SOR )

Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge.( SOR Item No. 21.22)

2 SEATER SOFA (SIZE 1340mmX675mmX seat height- 450 & seat back height-750mm)- S & F sofa made of 18mm thk. ply board fixed on frame work made of second class T.W.of cross section 50x50mm. Seat is provided with 18mm.tk. comm. ply & back is provided with 12mm plywood. Finished Hand rest is 575 mm.ht.from floor lvl., Seat Back is at 750mm. ht.from floor lvl. and Seat is at 450mm inclusive cushion. ht. from floor lvl. as per Drg.Seat is covered with 100mm thk. U-foam (40 density) + 20mm thk. U-foam (40 density) covering it. Back & handrest is covered with 40mm thk. U-foam (40 density) . Sofa with Internal seat size 550X550mm & back in sloping form and arm rest on both side as per drawing.Cushioned seat ,back hand rest and sides shall be be fully covered with upholstry cloth/leather finish of approved texture, color and shade including all fixtures, fasteners, nails, screw, ( NON SOR )

Providing & Fixing of Planter of 450mm ht. & 400mm width as per design.Basic structure made up of 18mm thick commercial plywood Finished With 1.0mm thick laminate on exposed surfaces of plywood.This job includes all Leads,lifts for all floor,Material & labour complete and nothing will be paid extra for execution of the item.All work is to be executed as per the direction and approval of Engineer in charge. ( NON SOR)

Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. (SOR Item No. 9.32)

Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work.( SOR Item No. 14.42.1)

Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. (SOR Item No. 11.89)

PProviding & applying white cement based putty of average thickness 1mm of approved brand & manufacturer, like Birla White/JK white or equivalent over the plastered wall surface to prepare the surface even and smooth i.e. al cost of material labour and scaffold etc. in all position complete. (SOR Item no.- 13.41)

Wall painting with acrylic emulsion paint , having VOC ( volatile Organic Compound) content less than 50 grams/litre, of approved brand & manufacturer , including applying additional coats wherever required ,to achieve even shade and colour. Two coats. (SOR Item No. 13.50.2)

Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete Size 800X1200 mm thickness 11-12mm (SOR No. 11.78.2.3)

Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter (SOR No. 11.29.1.1)

Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter (SOR no. 11.28.1.1)

Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel . Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall beam surface at any height with necessary nut and bolts/fasterner wherever is required complete as per direction of Engineer-in-charge.(SOR NO. 27.8)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.( SOR Item No. 9.18.1)

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). ( SOR Item No. 9.21)

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm ( SOR Item No. 9.57.1)

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm( SOR Item No. 9.58.1)

Dismantling of Existing sanitary fixture of washroom Sanitary fixtures wash basin -3Nos. Wc- 2 Nos. & Urinal- 2Nos etc. ( NON SOR)

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete (SOR No. 17.5)

Granite stone work 18 mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab.(SOR Item 11.33)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.( SOR Item No. 18.6)

Providing and fixing CPVC gate valve with knob of approved quality. ( SOR Item No. 18.13) 25 mm nominal bore ( SOR Item No. 18.13.1)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors ( SOR Item No. 17.57.2) Sand cast iron S & S as per IS - 3989 ( SOR Item No. 17.57.2.1)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. ( SOR Item No. 18.34)

Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. ( SOR Item No. 18.42)

Oval shape wash basin over counter /under counter (Counter to be paid sepratly). ( SOR Item No. 17.11.10)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. (SOR Item No.17.10)

Providing and fixing on wall face unplasticised Rigid PVC soil and waste pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg./cm2 ( minimum wall thickness 3.2mm) ( SOR Item No. 17.58)

75 mm diameter ( SOR Item No. 17.58.1)

110 mm diameter ( SOR Item No. 17.58.2)

Providing and fixing unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. ( SOR Item No. 17.59) Bend 87.5° ( SOR Item No. 17.59.5)

75 mm bend ( SOR Item No. 17.59.5.1)

110 mm bend ( SOR Item No. 17.59.5.2)

Single tee with door ( SOR Item No. 17.59.3)

75x75x75mm ( SOR Item No. 17.59.3.1)

110x110x110 mm ( SOR Item No. 17.59.3.2)

Single tee with door ( SOR Item No. 17.59.3)

75x75x75 mm ( SOR Item No. 17.59.4.1)

coupler ( SOR Item No. 17.59.1)

75 mm bend ( SOR Item No. 17.59.1.1)

110 mm bend ( SOR Item No. 17.59.1.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. For Extrnal work. 25 mm dia. nominal bore ( SOR Item No. 18.7.3)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : With 20mm nominal size graded stone aggregateM 15 – Grade concrete. ( SOR Item No. 4.1.1.3)

Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap (SOR NO. 25.56)

Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (SOR NO. 17.67)

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-inCharge. ( SOR Item No. 11.22)

Granite fine grained dark crystal of other colours and various patterns. ( SOR Item No. 11.22.2.1)

Cuddpah stone . ( SOR Item No. 11.22.5)

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. ( SOR Item No. 11.40)

Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin.Waste coupling 38mm of 83mm length and 77mm breadth (SOR No. 17.71.2)

Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. (SOR No. 17.72)

Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) (SOR NO. 25.50)

Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (SOR NO. 25.53)

Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (SOR NO. 25.54)

Providing & Fixing of CP Brass Urinal spreader of approved quality and make (SOR NO. 17.76)

Providing and fixing in position best Indian Health Faucet with 8mm dia 1 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall) (SOR NO. 25.37)

Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket (SOR NO. 25.62)

Providing and Placing of RECTANGULAR WORKSTATION / Linear Workstation Panel Base of Size: 1200mm(W) x 600mm(D) Having 25 mm thick Worktop with PVC lipping & 3 Drawer Metal Pedestal , keyboard and cpu trolley : 54 mm thick Modular Partition Panel of 1200mm height Panel. Panel based Modular Workstations of 54 mm thickness with extruded aluminum end post of size 54x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. Top trim is of aluminum section of size 54x12mm and snap fitted on its base of size 54x20mm. The aluminum frame work is supported on lower and upper partition block. Bottom Block is made up of 9mm prelaminated particle board of desired shade which is pasted On 33x25mm thick particle board batton frame, which is properly screwed to end post and Bottom electrical race way. Upper block is fixed above the table top and is made up of particle battons fixed with 9 mm thick pin board and cloth of desired shade, Optionally White Board or Glazing can Be provided instead of pin board. Raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. The raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. The modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. Top rails, end posts, connectors & raceway panels are made out of aluminum duly powder coated after 7 tank anti-rust phosphate treatment. All horizontal Top rail & vertical end post profiles would be elegantly curved in a convex fashion with a lengthwise running groove in the middle. Make - Godrej, Methodex, Herman miller (NON SOR Item )

Medium Back Chair Made Of Good Quality . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67) . Seat & Back Are Firmly Connected To The Base Frame Machanism Moves In The Ratio 1:2. Machanism Provided Upright Position Locking . Chair Max Height 1010 & min Height 925 . 470W x 480D Base Seat 60mm Thick Moulded With PU Foam & 510W x 510H Back Seat 60mm Thick Moulded With HD Foam . Tilt Adjustment Can Be Operated In Seating Position . 220x500/640 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Armrest Should Be Injection Moulded From Black Nylon . Height From Seat To Ground 450mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 665mm Without Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 665mm Without Casters .. (Greenguard/Asssured Green Business Certified Co.) Make - Godrej, Methodex, Herman miller (NON SOR Item )

Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process, crushing strength not less than 40kg/cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. Cement mortar 1:4 (1 cement: 4 sand) (SOR Item No. 6.2.1)

15 mmcement plaster on the rough side of single or half brick wall of mix 1:6 (1 Cement : 6 sand) ( SOR Item No. 13.2.2)

ELECTRICAL WORK

Supply and laying of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 3½ core 35 Sq.mm. ISI MARKED with Alu. Stranded /solid conductor. ( SOR Item No. 41.1.7.2)

4 core unarmoured 16 sq. mm. ( SOR Item No. 41.1.9)

Supplying of approved make TPN MCB DB metal double door IP 43 protection with provision for FP MCB/ Isolator/ RCCB/ RCBO as incomer and SP MCBs as outgoing inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator): ( SOR Item No. 27.12)

4 Way (4+12) ( SOR Item No. 27.12.1)

8 Way (8+24) ( SOR Item No. 27.12.4)

Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- ( SOR Item No. 27.8)

SINGLE POLE (SP) MCB SP 6Amp to 32Amp 10kA rating ( SOR Item No. 27.8.1.2 )

For Triple pole ( SOR Item No.27.8.3) MCB TP For 40Amp 10kA rating ( SOR Item No.27.8.3.3)

Four pole MCB FP 50Amp to 63 Amp 10kA rating( SOR Item No.27.8.4.4)

Supplying and drawing following pair of 0.5 mm size solid annealed copper conductor PVC Insulated telephone cable as per DOT Specifications in existing surface / concealed steel / PVC Conduit / Cassing-N-Capping as required. ( SOR Item No.38.2)

2 Pair ( SOR Item No.38.2.2)

10 pair ( SOR Item No.38.3.3)

Supply, Installation testing and commissioning of telephone Tag block Krone connector with enclosure and lock complete as mentioned below :- 10 pair ( SOR Item No.38.4)

Supplying, erecting and testing of approved make 300 mm sweep Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required..(sor item no.30.6.1)

Supply , Installation , testing and commissioning of Factory made 1.4HDMI Cable along with Connectors.(15mtr length) Make- MX / Dyeton/Terabyte ( NON SOR Item )

Supply , Installation , testing and commissioning of Factory made VGA along with Connectors.(15mtr length) Make- MX / Dyeton/Terabyte ( NON SOR Item )

Supply , Installation , testing and commissioning of Factory made RCA along with Connectors.(15mtr length) Make- MX / Dyeton/Terabyte ( NON SOR Item )

Supply and fixing of recessed mounting type Led light fixture, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF> 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. ( SOR Item No. 31.4) LED luminiare 2' X 2', 36Watt, color temp 3000- 6500k as required. ( SOR Item No. 31.4.1 ) Make philips ,syska, bajaj

Supply and fixing recessed mounting LED down lighter, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy>100 lm/Watt. LED driver PF > 0.95, THD < 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79- 08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.( SOR Item No. 31.6 ) 14/15 Watt, color temp 3000-6500k as required.( SOR Item No. 31.6.5 )

Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :- (Using modular accessories) ( SOR Item No. 4.1 ) Light point/fan points. ( SOR Item No. 4.1.1 )

Primary Short point ( SOR Item No. 4.1.1.1 )

Primary Medium point ( SOR Item No. 4.1.1.2)

Primary Long point ( SOR Item No. 4.1.1.3 )

(Light point/fan points) looping point ( SOR Item No. 4.1.2 ) Secondary Short point ( SOR Item No. 4.1.2.1 )

3 pin 6 Amp socket outlet on seprate board (SOR item no 4.1.3)

Short point ( SOR Item No. 4.1.3.1 )

Medium point ( SOR Item No. 4.1.3.2)

Long point ( SOR Item No. 4.1.3.3 )

Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 amp socket outlet point with 1.5 Sq.mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid PVC conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board. ( SOR Item No. 4.2 )

Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification ( SOR Item No. 4.3 )

2x2.5 Sq.mm.( SOR Item No. 4.3.1)

4x2.5 Sq.mm.( SOR Item No. 4.3.2 )

6x2.5 Sq.mm.( SOR Item No. 4.3.3)

8x2.5 Sq.mm.( SOR Item No. 4.3.4 )

Point wiring (excluding metallic switch box & sheet ) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Concealed rigid P.V.C Conduit (HMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq.mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for :- On Separate Board ( SOR Item No. 9.1.1 )

Short Point

Medium Point

Long Point

Extra Long -I

Extra Long -II

Extra Long -III

Same board switch socket 6/16 Amp ( SOR Item No. 9.2 )

Supplying and fixing PVC conduit ISI marked alongwith the accessories in concealed system including painting etc. as required. ( SOR Item No. 16.1 )

PVC Conduit 20mm (HMS) ( SOR Item No. 16.1.1)

PVC Conduit 25mm (HMS) ( SOR Item No. 16.1.2)

PVC Conduit 32mm (HMS) ( SOR Item No. 16.1.3)

Supplying, erection and testing of approved make 400 mm sweep Wall Mounting fan complete with Wall Bracket ,canopy, blades, speed Regulator etc .A.C 230-250 volts with connections and including raw bolt/Anchor hole fastener etc. complete finished of approved as required. ( SOR Item No. 32.2.2 )

Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid PVC Casing-N-Capping / conduit in surface or concealed as per specification. ( SOR Item No. 19.1 )

(a) 1 X 1.5 sq mm ( SOR Item No. 19.1 .1.1)

(a) 1 X 2.5 sq mm ( SOR Item No. 19.1.2.1)

4.00 sq. mm. wire , 1 X 4.00 sq. mm. ( SOR Item No. 19.1.3.1 )

6.00 sq mm wire , 1 X 6.00 sq mm ( SOR Item No. 19.1.4.1 )

Wiring for sub-mains with PVC insulated cable FRLS with copper multi strand conductor ISI marked in recessed/concealed rigid PVC conduit (HMS) FRLS ISI marked of suitable size (conduit included) including 2mm thick accessories, connection etc, as required as per specification. (Refer General Notes for Classification of Conduit Wiring Point No.11) ( SOR Item No. 23.1 ) 4 WIRE SUB-MAIN ( SOR Item No. 23.1.4) 6.0 sq. mm. cable ( SOR Item No. 23.3)

Supply and fixing Led tube rod comprising of LED tube with non-integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job. ( SOR Item No. 31.3) Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser. ( SOR Item No. 31.3.3)

Labour charges for fixing sheet steel enclosure, MCB DB surface mounting type, as per accepted practice on 25x5mm flat iron clamp duly embedded in wall, cable connection etc. complete. ( SOR Item No. 28.5) FOR S.No :- 27.12.3 to 27.12.4 & 27.13.1 ( SOR Item No. 28.5.3)

suppling and drawing Co-axial T.V. Cable RG-6 Grade , 0.7 mm Solid Copper conductor PF Insulated , Shielded with fine tined copper braid and protected with PVC Sheathed in the existing surface / concealed ,steel / PVC. Conduit as required. ( SOR Item No. 38.1)

Supply, fixing and testing of T.V. Outlet F.T ( SOR Item No. 38.7)

Supply, fixing and testing of T.V. Outlet Modular (1Module) ( SOR Item No. 38.8)

Supplying and fixing PVC Casing-N-Capping (Double Fold) ISI Marked along with accessories on surface etc. as required ( SOR Item No. 17.1)

PVC Casing-N-Capping (Double Fold) 38 mm x 20mm ( SOR Item No. 17.1.4)

PVC Casing-N-Capping (Double Fold) 32 mm x 12mm ( SOR Item No. 17.1.3)

PVC Casing-N-Capping (Double Fold) 25 mm x 12mm ( SOR Item No. 17.1.2)

PVC Casing-N-Capping (Double Fold) 20 mm x 12mm ( SOR Item No. 17.1.1)

Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:- ( SOR Item No. 18.3)

1 or 2 Module ( SOR Item No. 18.3.1)

3 Module ( SOR Item No. 18.3.2)

6 module ( SOR Item No. 18.3.4)

8/9 Module ( SOR Item No. 18.3.5)

12 Module ( SOR Item No. 18.3.6)

16 module ( SOR Item No. 18.3.7)

Supply, fixing and testing RJ11 Telephone jack single with shutter F.T ( SOR Item No. 38.7)

Supply , fixing and testing of RJ- 11 telephone jack modular ( 1 module ) ( SOR Item No. 38.8)

Supply, installation testing and commissioning RJ-45 computer jack cat 6 with shutter moduler( 1 module) ( SOR Item No. 38.9)

Suppling and drawing 4 pair shielded, 0.5 mm PVC. Insulated copper conductor un-armoured Cat-6 computer cable FR in Existing surface / concealed, steel / PVC. Conduit/Casing-Ncapping as required.(Elec .SOR Item 38.11)

12U cabinet 600X600X500, wall mounting with 6 point 5 Amp. socket power supply strip and fan, tray. ( SOR Item No. 38.18.3)

CAT 6 RJ45 Patch Cord F/UTP 2 Mtr. ( SOR Item No. 28.14.2)

CAT 6 RJ45 Patch Cord F/UTP 1 Mtr.( SOR Item No. 38.14.1)

Supply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector ( SOR Item No. 38.16)

24 port PoE switch with 4 SFP ports Supply, installation testing and commissioning of 24 port PoE switch with 4 SFP ports, having security features like port security supports 64 MACs per port, auto surveillance VLAN, loopback detection automatically disables a port when a loop is detected, cable diagnostics allows administrators to determine cable status, UTP Cat. 5, Cat. 5e (100 m max.), full/half-duplex for 10/100 MBPS, full-duplex for 1000 MBPS, auto MDI/MDIX adjustment for all twisted-pair ports, switching capacity, 56 GBPS, maximum 64 bytes packet forwarding rate, 41.7mbps, Ports 1 to 24 compliant with 802.3 at ( SOR Item No. 54.28.1)

Dismentling and Re-installation of Split Air conditioners with suitable , gas charge and hole packing all complete work. ( NON SOR Item)

Cassette AC :- Supply installation testing and commissioning of split type ceiling cassette Slim line/floor standing air conditioning unit of capacity including indoor, outdoor unit fitted with rotary compressor, copper condenser and first charge refrigerant R410A/ecofriendly green gas only, cordless remote control, auto air swing louvers, connection copper lead wire between outdoor and indoor unit, connection copper lead wire upto 1.5 mtr., excluding connection copper pipe of required size, insulation, floor stand for outdoor unit, condense water outlet complete etc as required. Outdoor/indoor units should be of same make (brand). (SOR Item No. 46.13) Ceiling suspended/mounted cassette type 4 way unit with inbuilt drain pump & decorative panels. (SOR Item No. 46.13.1) 1.8 TR/2.0 TR single phase (SOR Item No. 46.13.1.1)

Supply, installation, testing & commissioning of suction/discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber insulation 6/9mm thick class 'O', etc complete as required. (SOR Item No. 46.3)

Copper tube 1/4" (SOR Item No. 46.3.1)

Copper tube 3/8" (SOR Item No. 46.3.2)

Copper tube 1/2" (SOR Item No. 46.3.3)

Copper tube 5/8" (SOR Item No. 46.3.4)

Drain piping :- Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specification. (SOR Item No. 46.31)

20 mm dia ID (SOR Item No. 46.31.1)

25 mm dia ID (SOR Item No. 46.31.2)

providing and installation of wireless public address systems with following units and specifications: ( NON SOR Item )

i) Host Unit - Carrier Frequency 2.4 GHz( 2400-2483MHz) Adaptive Digital FHSS Technology. Operating Range upto 40 meters. Frequency Response 70-15000Hz. Power Supply 12V DC from AC Adapter. Host unit should be used together CWS-8100C Chairman Unit, CWS- 8200D Delegate Units and GN- 45 Gooseneck Microphones. make Ahuja/Bosch/Classico/BIDAS,

iii) Delegate Unit with power/ Talk Button. LCD Displays the Delegate Unit No. and battery charge status. Microphone indicator Ring LED. Power Supply 2 pcs, AA Alkaline Batteries.

Methodex Systems Pvt. Ltd

Akash Interior Furnishers (India)