COMPREHENSIVE MAINTENANCE AND MISC BR WORKS AND INTERNAL ELECTRIFICATION AND EM ALLIED ITEM(S) OF WORK AT JCOs/OR MD ACCN IN ZONE B AREA UNDER GE (EAST) MATHURA

Amount

Demolition of reinforced cement concrete as in roofs, floor (other than ground floors) beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L for 50mm thick sand stone slab as in chajjas of ground and first floor over windows, doors set and jointed over supports in cement mortar 1:4 complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm width or girth of brick walls complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections including disconnection of fitting complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span including form work, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for mild steel TMT bars 5 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item serial No 11.00 here-in-before but mild steel round bar 10 mm dia and over as in handles of manhole covers complete all as specified and as directed.

M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab for manholes, chajja, shelves and similar articles including form work etc complete all as specified and as directed. Note : Reinforcement shall be measured and paid separtely under relevant item(s) of this BOQ.

M&L for cement mortar 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in louvers and jallies 40mm thick including all mouldings set in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:4 by mixing liquid water proofing compound as per manufacturers instructions finished even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of concrete surface as in ceiling in cement mortar 1:3 finished even & fair complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Make: Asian paints/Dr Fixit/STP/CICA as approved by GE.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over and including a coat of primer, white or tinted complete all as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash all as specified and directed by engineer in charge.

M&L for providing 1mm thick wall care putty on plastered surfaces of walls to achieve smooth finish complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surface of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directe

Demolition of existing roof treatment of any descriptio and thickness and cleaning the surface upto RCC roof with wire brushes drying and cleaning to remove all treatment, foreign materials and washing with water to remove loose particles and removing the demolished material out of MoD land complete all as specified and as directed.

M&L for applying cold bitumenous primer @0.30 liter/Sqm and applying 3mm thick APP based polymeric membrane minimum weighting 3.5kg/sqm reinforced with polyster non wove fabric (but not less than 150gms/sqm) laid over bitumen primer by torched application complete all as specified and as directed.

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigments, machine pressed, set jointed and pointed in neat cement slurry in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 and filling the joints with Tile Max premium cementitious grout material of JK cement or its equivalent complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.

All as per item serial No 34.00 here-in-before but as on vertical surfaces laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.

Demolition of stone slabs of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work any colour as specified (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified.

S&F in repair 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified.

S&F in repair PVC (SWR) 110mm bore bends any radius with oval access door complete as specified and as directed.

S&F in repair PVC (SWR) 75mm bore bends any radius complete as specified and as directed.

S&F in repair PVC (SWR) 75mm bore bends any radius with oval access door complete as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with acess door complete as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain 75mm dia of outlet with grating including jointing with solvent cement complete as specified and as directed.

S&F in repair bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for 15 mm bore dia pipes or union complete all as specified and as directed.

S&F in repair angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both ends for 15 mm bore dia pipes or union complete all as specified and as directed.

S&F in repair Hand jet health faucet having 8mm dia & 1.2 mtr long SS flexible tube and wall hook with all connected fittings for 15mm bore pipe or union complete all as specified and as directed.

S&F in repair 2 way bib taps cast copper alloy, chromium plated of superior quality with wall flange including fixing to 15 mm bore dia iron pipe complete all as specified and as directed.

S&F in repair waste coupling of cast copper alloy chromium plated for 32mm bore discharge pipe (half or full threaded) complete as specified and as directed.

S&F stainless steel Grating doom 100 mm dia with or without hole complete all as specified and as directed.

S&F cast copper alloy chromium plated towel Ring of size 250-300mm fixed with and including Chromium plated brass screws to wooden/plastic cleats complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nut of length 600mm complete as specified and as directed.

S&F in repairs PVC valveless syphonic action type, low level flushing cistern 10 liter capacity white/coloured with inlet ball valve float with dual flushing button system, handle including fixing brackets and 32mm bore PVC Flush pipe etc complete all as specified and as directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with mild steel chromium plated aluminised hinging device, complete all specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc. incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one and including coat of red oxide primer complete all as specified.

Dismantling galvanised 2 strand, steel barbed wire in fencing complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc complete as specified and as directed Note: (Each line wire to be measured)

S&F 12mm thick PVC Celuka ply both side plain white colour fixed with screws, solvent cement/adhesive to make cupboard shutter/kitchen cabinet complete all as specified and as directed.

S&F 18mm thick factory made Rajshri PVC shelf/ partition of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size18mm x 18mm as per required length the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 kg/cum complete all as specified and as direction.

Dismantling PVC celuka ply or insulation board including all fittings of kitchen cabinet complete all as specified and as directed.

S&F in repairs stop valve cast copper alloy, chromium plated fency type with long shank and cup (Concealed type) screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete, including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm bore PVC Flush pipe including jointing to socket of flushing rim complete all as specified and as directed.

S&F in repairs Stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen with plug washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe. Overall size 915mmx460mm bowl and size 410x330x160mm complete as specified and as directed.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm including brackets, brass, chromium plated waste coupling complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair cast copper alloy Chromium plated swivel shower rose 125mm size with and including SS arm 450mm long arm and swivel complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) 1000 liters capacity having monkey protection cover hoisted and fixed in position on roof including connections and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore dia iron pipe complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with close top) 500 liters capacity having monkey protection cover hoisted and fixed in position on roof including connections and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore dia iron pipe complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nut of length 300mm complete as specified and as directed.

S&F stack clamps made out of 50mm x 5mm flat iron or 16mm dia round iron stays including bolts & nuts and securing ends of stays for 50mm bore pipe complete as specified and as directed.

S&F stack clamps made out of 50mm x 5mm flat iron or 16mm dia round iron stays including bolts & nuts and securing ends of stays for 75mm bore pipe complete as specified and as directed.

S&F in repair Waste fittings, brass, chromium plated for wash hand basin 32mm bore waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair Waste fittings, brass, chromium plated for wash hand basin 40mm bore waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ cm2 fixed as waste pipe for WHB/Urinal etc complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (Below or above ground level) including chequered tiling and paver blocks and debris outside of MOD land complete all as specified and as directed.

M&L 100mm thick cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in sub floors, sub bases, floors and paving etc. complete all as specified and as directed.

M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade of concrete as in floors/pavements complete all as specified and as directed.

M&L for chequred cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry in floor laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description n exc 1 sq.m each complete all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed in the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F of Pressed steel frames of size 125x60mm fabricated out of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F Pressed steel frames of size 105 X 60 mm fabricated out of 1.25mm thick MS steel for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for preparation of steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for cement concrete type C-1 1:3:6 (using 20mm graded stone aggregate) as in bed block and filling in pressed steel door frames complete all as specified and as directed.

S&F 35 mm thick factory made, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type with lipping/frame to match on both sides complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Aluminium handles of size 150 mm fabricated type, anodised complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty/aluminium beading in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue anodised overall length of cover plate 140mm with hard drawn steel spring, fixed in floor complete all as specfied and as directed.

S&F 300 mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete all as specified and as directed.

M&L for 10mm thick polymer modified plaster in cement mortar 1:4 mixing the polymer in the ratio of 1:10 (1 part of polymer & 10 part of cement) to sides and base of sunken floor portion complete all as specified and as directed.

M&L for providing cement concrete 1:7:12 type F2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, sunken floor etc complete all as specified and as directed.

M&L 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floors finshed the surface even and smooth without using extra cement complete all as specified and directed.

S&F rolled mild steel joist, channel, angle or Tee section fixed independently without connecting plate etc cut to ordinary length i.e. within 20 mm of length indicated) of Fe 410 Gde E-250 quality including applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for cutting holes into or through brick walls built in cement mortar superficial area no exc 150sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and as directed.

Taking down existing copper/aluminium point wiring (Light/Fan /Socket or Power Point/bell etc) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets), removing materials from site and making good the disturbed surfaces of walls, floors etc as per existing specification ccomplete all as specified and as directed. Note : Credit for above items should be made as per credit schedule separately.

Taking down carefully Submain wiring of any type size complete and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap excluding MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases (making good all to the disturbed surfaces as per existing) and provision of modular flush metal boxes including modular cover plate with frame for mounting modular switches, sockets, regulators etc including sunk cast iron/pressed steel/terminal boxed for mounting flush type switches/sockets etc with 3mm thick phenolic lamiated sheet covers and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified and as described for the following:-

One light/fan point controlled by one way switch 5 amp complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on same board with other switches complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.

One bell point controlled by one push button on independent board complete all as specified and as directed.

One light point controlled by two 2-way switches complete all as specified and as directed.

All as per item Serial No. 120.00 here-in-before but for 3 pin/5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified and as directed.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed.

Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified and as directed.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified and as directed.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified and as directed.

S&F in replacement switch piano type , SP, one way, flush type 5 Amps complete all as specified and as directed.

S&F in replacement socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified and as directed.

S&F in replacement socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified and as directed.

S&F in replacement switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified and as directed.

S&F in replacement bell push siwtch piano flush type, SP, one way, 5 Amps complete all as specified and as directed.

S&F in repair ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed.

S&F in repair lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement Bell Multi Music type, 230 Volts including connection complete all as specified and as directed.

S&F in replacement Bell Ding dong type, 230 Volts including connection complete all as specified and as directed.

S&F in replacement step type electronic fan ragulator piano flush type (Switch/socket type) on the exiting phenolic laminated sheet complete all as specified and as directed.

M&L for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof including cutting & chases (making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire complete all as specified and as directed. Note : Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC casing and caping will be measured as one RM.

M&L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof including cutting & chases (making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire complete all as specified and as directed. Note : Two runs 6 Sq mm (P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM.

M&L for Sub Main Wiring with two runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof including cutting & chases (making good all to the disturbed surfaces as per existing) with and including 10 Sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 10 Sq mm (P&N), one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM.

S&F in repair indoor decorative ultra slim surface/Wall mounted LED batten tube light fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired with and including 1 x 20 watt LED tube and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repair surface mounted Bulk Head LED light fitting of capacity 10 Watt complete with all accessories and connection complete all as specified and as directed.

Supply and fix LED 9W, suitable for B22 type holder, warm white/ cool white/natural white complete all as specified and as directed.

Supply and fix LED 7W, suitable for E14 type holder, warm white/ cool white/natural white complete all as specified and as directed.

Supply and install in replacement of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed.

Supply & fixing in repair indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts complete all as specified and as directed.

M&L for building security light bracket made out of 40mm dia medium grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including applying two coats of aluminium paint over a coating of red oxide primer complete all as specified and as directed.

S&F in replacement sheet metal enclosure MCB distribution board, SPN 12 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F in replacement sheet metal enclosure MCB distribution board, SPN 8 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F in replacement sheet metal enclosure MCB distribution board, SPN 4 Way, Double door, phosphatised, powder coated with 200Amp rated bus-bar, neutral link, earth bar and din rail , cable ties for cable management, 240 V complete all as specified and as directed.

S&F in replacement MCB SPN 63 Amp 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F in replacement MCB SPN 40 Amp 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F in replacement MCB SPN 6-32 Amp 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F in replacement MCB SP 6-32 Amp 'C' series, breacking capacity 10KA, 240V complete all as specified and as directed.

S&F in repair Plastic surface mounting box 1/2 Module gang box for mounting switchs, sockets, fan regulator etc complete all as specified and as directed.

S&F in repair Plastic surface mounting box 3/4 Module gang box for mounting switchs, sockets, fan regulator etc complete all as specified and as directed.

S&F in repair Plastic surface mounting box 6/8 Module gang box for mounting switchs, sockets, fan regulator etc complete all as specified and as directed.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch/socket complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately under relevent item of this BOQ.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch/socket and connection complete all as specified and as directed. Note :- Replacement of unserviceable switch/socket/ regulator shall be measured & Paid separately under relevent item of this BOQ.

S&F Modular metal flush box 1/2 Module complete all as specified and as directed.

S&F Modular metal flush box 3 Module complete all as specified and as directed.

S&F Modular metal flush box 4 Module complete all as specified and as directed.

S&F Modular metal flush box 6 Module complete all as specified and as directed.

S&F Modular metal flush box 8 Module complete all as specified and as directed.

S&F modular white cover plate with frame, 1/2 module complete all as specified and as directed.

S&F modular white cover plate with frame, 3 module complete all as specified and as directed.

S&F modular white cover plate with frame, 4 module complete all as specified and as directed.

S&F modular white cover plate with frame, 6 module complete all as specified and as directed.

S&F modular white cover plate with frame, 8 module complete all as specified and as directed.

Supply & Fixing piano flush type, electronic step type fan Regulator complete all as specified and as directed.

S&F in repair Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed.

S&F in repair Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed.

S&F in repair Modular fan Regulator electronic step type complete all as specified and as directed.

S&F in repair Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified and as directed.

S&F in repair Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed.

Taking down carefully service connection of any type complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified and as directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole/Main Panel Box and testing complete all as specified and as directed of following sizes :- Note: HDPE pipe rate shall deemed be included in quoted unit rate of above item(s).

10 sqmm 2 core

10 sqmm 4 core

16 sqmm 4 core

25 sqmm 4 core

Supply & fix in replacement of MCCB 100 Amps, 'C' series, breacking capacity 16KA, 4 Pole, 415V complete all as specified and as directed.

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted for 240 volts, triple pole and neutral 4 way with 200 Amps rated copper bus bar, type complete all as directed.

S&F in replacement MCB TPN 40-100 Amps, 'C' series, breacking capacity 10KA, 240V including connections with copper lugs of suitable size in MCB DBs complete all as specified and as directed.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in pit with 40mm thick RCC cover in reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

M/s DEVI DAYAL CONSTRUCTION CO

B S ENTERPRISES

M/S CHAUDHARY CONSTRUCTION

Ms Kamal Kant Agarwal