ADDN/ALTN OF BUILDING NO. P-345 AND BUILDING NO. P-744 AND DISPLAY BUILDING NO. P-346 AT AFS HASI MARA

Taking down cement plaster on brick/concrete surfaces of any description in any position incl racking out joints, hacking for key, scrubbing down with water etc and removing rubish off the premises, complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM (1:3) on fair faces of ceiling surfaces, soffits of staircase, waste slab etc, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick (10mm + 5mm) in two coats on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound at top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as 'supply only'.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of 100% premium acrylic weather proof exterior emulsion paint, alkali & fungal resistance, approved colour and shade (pattern deep green/camouflage), over and including a primming coat of exterior emulsion primer as per manufacturer's instructions, complete all as specified and directed.

M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitening primer over and including 3mm thick wall care putty in two coats (each 1.5mm thick ) and preparation of putty surfaces even and smooth, complete all as specified and directed.

M&L for prepration of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening primer over and including 3mm thick wall care putty in two coats (each 1.5mm thick) and preparation of putty surfaces even and smooth, complete all as specified and directed.

M&L for prepration of old plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

Dismantling of old steel window/ventilator of any description, complete all as specified and directed

S & F in repair powder coated (minimum thickness of powder coating 15 micron) aluminium anodised door comprising of frame of size 101.60mm x 44.6mm x 2.4mm thick push/pull type glazed door shutter having top and bottom section of size 83 x 44.5 x 2.4mm and 100 x 44.5 x 2.4mm thick respectively, styles section of size 80 x 44.5 x 2.4mm thick and lock rail of size 100mm x 44.5mm x 2.4mm thick including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size including 5mm thick tinted sheet glass in both panel, hinges, mortice lock, stays & aluminium anodised handle of suitable size, etc, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty/wooden beads in square n.exc 0.5 sqm. in each pane, complete all as specified and directed.

Demolition of brick work or sone/boulder masonry, built in cement mortar including all quoiins, pillars etc, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100m and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C- 2, (using 40mm graded crushed stone aggregate) as in floors and pavings or plinth protection etc, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C- 2, (using 40mm graded crushed stone aggregate) as in sub-base etc, finished even and fair, complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in floors etc. finished even and smooth without using extra cement, complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles or stone and remvoing rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4) as backing coat to receive wall tiles, complete all as specified and directed.

M&L for machine cut kota stone slab 18-20mm thick on floor, laid over and including 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F CPVC pipe of size 16mm outer dia, SDR 11 & plain CPVC SDR 11 fittings complete, fixed on wall/ceiling or laid in floors with necessary saddle/clamps including all necessary fittings like elbow, tee, socket, reducer, etc. fixed with necessary solvent cement, complete all as specified and directed.

S&F CPVC pipe of size 20mm outer dia, SDR 11 & plain CPVC SDR 11 fittings complete, fixed on wall/ceiling or laid in floors with necessary saddle/clamps including all necessary fittings like elbow, tee, socket, reducer, etc. fixed with necessary solvent cement, complete all as specified and directed.

M&L for cutting chases on wall surface, pinning in making good to facing where required and pointing in CM (1:3) to ends to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills , sunshades, shelves, lintesl etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good as per existing surface cutting not exc 10cm girth in brick walls, complete all as specified and directed.

S&F in repair 15mm bore two way bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe, compelete all as specified and directed.

S&F in repair vitreous china wash hand basin, oval shape,pastel, flat back of size 580 x 450mm including chain, plug & procelain stopper and pinning in ends of brackets etc, complete all as specified and directed.

S&F in repair vitreous china EWC water closet pan, white and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe with seat and cover and flushing cistern & flush pipe including making good distrubed surfaces/damaged, complete all as specified and as directed.

S & F in repair vitreous china urinal, bowl type flat back of size 460 x 350 x 260mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader, providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plug with and including 60mm long brass screws, pointing around urinal back, complete all as specified and directed.

S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.

S&F in repair 32mm bore, waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F in repair 15mm bore, fancy type, chromium plated, stop valves, concealed type, with long shank and cup, cast copper alloy screwed down high pressure screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair pillar tap, 15mm bore, capstan heads, chromium plated, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair PTMT towel rail, 600mm long, fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and directed.

S&F in repair PTMT towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight - 90 gms), complete all as specified and directed

S&F shelf of PTMT of size 450mmfixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and directed.

S&F in repair 150mm grating round of PTMT (minimum wight - 100 gms), complete all as specified and as directed.

S&F in repair 100m dia cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed.

S&F 110mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old unserviceable pipe including fittings of any size, complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work, complete all as specified and as directed.

M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to Fe-290 (Gde E-165), complete all as specified and directed.

S&F MS roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe 410-W (Gde E-250), complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall, vally/ridge etc, fixed with self tapping screws, complete all as specified and directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide, zinc crome primer, complete all as specified and directed.

S&F false ceiling with powder coated exposed Gl grid suspension system (E-Grid T- 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600mm long, Cross Tee 1200rnm/600rmm long and Wall Angie. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600mm shall be placed perpendicular to the Cross Tee 1200mn iong to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 3 to 4mm dia GI wire from purlins/soffit including providing 4mm thick Fiber Cement Designer Board, (Dendity > 1200 kg/Cum, modulus of rapture (MOR)-15.85 MPa, thermal conductivity (k)-0.0872 w/mk) confirming to IS 14862 & typr 'B' category III of ISO 8336 : 1993, (Reaction to fire-A2-S1-D0) tested as per EN13501 Part- & BS-476 Part 4, 5,6 & 7 and having noise absorption of 0.9 NRC as per ISO : 354, should be placed in the grid module to form a false ceiling including dismantling of old unserviceable ceiling boards, any thickness including cover fillets, complete all as specified and directed

S&F wall panelling with 9mm thick High Pressure Steam Cured Non Asbestos Fiber Cement heavy duty acoustic board (Density > 1450 Kg/m3. Modulus of Rupture(M.O.R)-24 MPa, Thermal Conductivity(K)- 0.0862 W/mk) confirming IS 14862:2000 & Type A Category III of ISO 8336 : 1993. (Reaction to fire-A2-S1-D0) tested as per EN13501 Part- & BS-476 Part 4, 5,6 & 7 and having noise absorption of 0.9 NRC as per ISO : 354, fixed on the supporting ‘W’ profile/ Alumunium tube or Iron tube with the help of full thretea flat head Screw (0.70mm thick having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55mm) placed @ 407/1220mm c/c vertically and perimeter channel (having one flange of 20mm and another flange of 30mm with thickness of 0.70mm and web of length 27mm) is fixed on the floor and the ceiling with the nylon sleeves @ 300mm c/c with expandable fasteners. Board to be fixed to the 'W’ profile with 35mm long self embedding type Fiber Cement Screws @ 300mm c/c. The boards be finished so as to have a uniform gap/groove or over lapping system. The groove should be filled up with PU sealant. Finally, both side of the boards including the edge should be primed with two coats of cement primer & exterior surface of the boards to be painted with PU paint of approved shade/make , complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc, complete all as specified and directed.

All as per item No 60.00 here-in before but for 3 pin 5 Amp socket point on same board, complete all as specified and directed.

All as per item No 60.00 here-in before but for 3 pin 5 Amp socket point on independent board, complete all as specified and directed.

All as per item No 60.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded cable FRLSH type for one 15 Amp 3 pin socket outlet point including PVC insulated 4.0 Sqmm FRLSH type copper multi stranded conductor as earth wire including steel box of required for modular switches/sockets for 3 pin socket outlet point, 15 Amp on independent board and industrial socket for geyser, complete all as specified and directed.

S&F switch, modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and directed.

S&F switch, modular type, single pole, one way, 15/16 Amps, one module, complete all as specified and directed.

S&F socket outlet, modular type, multipurpose, having provision for 2/3 pin, 5/6 Amp, two module, complete all as specified and directed.

S&F socket outlet, modular type, multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, combined, two module, complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket including one double pole MCB 20 Amp, 240 V, concealed in wall, complete all as specified and directed.

S&F decorative modular cover plate with frame, 3 module, white, completes all as specified and directed.

S&F decorative modular cover plate with frame, 4 module, white, completes all as specified and directed.

S&F decorative modular cover plate with frame, 8 module, white, completes all as specified and directed.

S&F ceiling rose of size 65 x 50mm surface bakelite, three phase, polycarbonate, isolated body, complete all as specified and directed.

S&F LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F LED lights fitting 1 x 20 Watt, 220V, AC , box type with driver, LED lighting fixture with extruded aluminium channel, including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F LED flood light fitting 70 Watt 230 volt, made up of pressure dia cast, aluminium housing, AC outdoor type with thermal management in multiple optics with impact and corrosion resistant complete with driver and 70 watt LED lamp, IP 65/66 protection, alongwith fixing accessories, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core including taking out old unserviceable UG cable of any type and size, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation, or cable trenches etc. n. exc. 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing of excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia (outer) conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

S&F wall mounted fan, heavy duty, capacity 90 CFM, 400mm sweep, 2050 RPM, 110 watt with all fixing arrangement on wall and connecting with and including 3 core flexible copper cable of suitable size upto ceiling rose, complete all as specified and as directed.

S&F exhaust fans complete with blades, down rods, electronic regulator and accessories, 230 V, 300mm sweep, min air delivery 210 CFM, completes all as specified and directed.

S&F MCB distribution board (DB) TPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 04 way, with copper busbar for each phase (as per OEM) IP 43 protection, neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed.

S&F MCB TPN 40 to 63 Amps, 240V,10 KA, 'C' curve, fixed in proper position, including connection and testing,complete all as specified and directed.

S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 8 way, with 100 Amps rated copper busbar (as per OEM) IP 43 protection, neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240V, 10 KA, 'C' curve, fixed in proper position, including connection and testing, completes all as specified and directed.

S&F MCB SPN 6 to 32 Amps, 10 KA, 'C' curve, fixed in proper position, including connection and testing, complete all as specified and directed.

S&F in position heavy duty powder coated MS cable trunking of the sizes 300mm wide x 50mm wall height cable tray alongwith cover of cable tray (standard type C) for supporting 1100 Volts grade armored/ unarmored aluminium/copper conductor cables, fabrication from angle and perforated 2mm thick M.S CRCA sheet powder coated with expansion coupler, elbow, bend, inside outside riser, equal un-equal tee etc with suitable cover plates powder coated and suitable cover with bolts, washer and nuts, knock out holes for cable connections as per approved design, the tray shall comply with the specification of NEC (National Electric Codes) and NEMA (National Electric Manufacturers Association) the steel shall be as per IS: 226 and galvanizing as per IS: 2629BS 729IASTM 123, completes all as specified and directed.

S&F cable tray/bus bar fixing supports and other steel work/including MS flats, angles. T iron, channel etc. cutting drilling holes/welding in MS members as per the site requirements, duly painted the supports with two coats of synthetic enamel paint (1st grade quality) over a coat of primer, including provision of dash fasteners and other fixing accessories, completes all as specified and directed.

S & F porcelain vitreous white/brown/green spacers insulator of size 75mm x 35mm x 40mm height complete with one number GI stud bolts 6mm dia, 40mm long including nut & washers and two number GI fixing bolts of size 6mm dia and 50mm long including washers and drilling holes for holding /fixing aluminium strip/roof conductor, as required, complete all as specified and directed.

S & F copper strip of size 20 x 3.00mm with saddles and fixing screws etc. for roof conductors with rubber & bitumen washer & fixed to porcelain insulator on wall for down conductor, complete all as specified and directed

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required, 2mm dia galvanised iron or steel wire, complete all as specified and directed.

S&F voltage stabilizer of capacity 15 Amps for automatic operation, single phase, naturally air cooled, indoor type & designed for input variation between 170 V to 250 V, 50 Hz, with output voltage stabilized at 230 V with accuracy of ± 2.5%, with digital display, automatic high and low cut out with wall mounting accessories, complete all as specified and directed.

Taking down the split/window AC unit from existing position from any hight of capacity 1.5/2.0 TR of any make, deposited to AGE E/M store, complete all as specified and directed.

Refixing of split type AC of capacity 1.5 to 2 TR, by fixing the indoor and outdoor unit in position including connection with replacement of copper tubing upto 3.0 mtrs length brazing, welding including insulation, charging of refrigeratnt gas upto required level and filling the cavities on wall, setting of grills alignment including testing & commissioning, complete all as specified and directed.

Dismantling for earthing strip (copper/aluminium) of any size and refixing the same after certain repair work, complete all as specified and directed.

S&F fire alarm control panel complying with BS EN 54 single loop panel of capacity from 99 detectors & 99 modules upto 200 detector, complete all as specified and directed.

S&F detectors complying with and type certified to EN - 45 addressable type multisensor detector with heat and smoke combination, Photoelectric /Optical with base with self built intelligence as per IS: 11360, complete all as specified and directed.

S&F Fire Alarm sounders / Sirens electronic type horizontal two stage continous normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5m with sound output variation of + 5 dB 1000m range, complete all as specified and directed.

Note: An amount of Rs. 37,601.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

Please Enable Macros to View BoQ information