REPAIRS TO SECURITY FENCING, RETAINING WALLS, FOOTPATH AND CERTAIN MISCELLANEOUS WORKS AT PEDONG, ALGARAH, AP ALGARAH, DALAPCHAND AND TEESTA TCP UNDER GE 867 EWS

Amount

Dismantling of posts or struts (wood, steel or RCC), embedded in concrete, any section, including taking out embedded portion by excavation and breaking the concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge..

S&F Fe-290 Gde E-165 mild steel angle or other sections as in posts and struts in fencing etc., and similar work including cutting tops to shape as directed,drilling holes, notching for wire, including all necessary drilling holes for bolting or riveting, etc., complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete 1:3:6 mix, type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

S&F MS galvanised chain link fencing fixed to any type of standards, rails, posts, straining bolts etc., including provision of binding wire including dismantling of old fencing wire mesh any type complete all as specified and directed by Engineer-in-charge.

S&F mild steel machine made screw bolts not exceeding 5cm long 11 to 15 mm (diameter of neck) with hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut complete all as specified and directed by Engineer-in-Charge.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 100mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., including dismantling old rusted barbed wire any type all as specified and directed.

S&F Mild steel bar round bars 6 to 8 mm dia in fencing, cut to length, bent to shape required including cranking, bending, hooking ends and binding etc. conforming to grade I, IS-432 (Part I) all as specified and directed.

S&F Fe-290 Gde E-165 Rolled mild steel sections as in framed work for cattle traps, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings & hanging; also fastening & fixing including taking down existing gates complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, exceeding 10 cm width or girth and applying two coats of black japan paint over one coat of red oxide zinc chrome primer all as specified and directed by Engineer-in-Charge. Make for Item No. 9&10: ASIAN/ SHALIMAR/ BERGER/ JENSON & NICHOLSON/ IEL/ NEROLAC

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 including demolition of existing concrete block masonry complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE.

M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and directed by Engr-in-charge.

M&L for preparing newly plastered surfaces of walls and applying two coats of colour wash over one coat of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM/LUCKYCEM or equivalent make as approved by GE.

M&L for 75 mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in grey cement to match the surfaces as in floors over and including 20 mm thick screed bed in cement mortar 1:6 including demolition of existing tiles and removing rubbish off the premisescomplete all as specified and directed. Make: NITCO/ULTRA/ EUROCON/ DECO/BHARAT or equivalent as approved by GE.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 28,340.00 B/F from Ser page No. 23 NOTE: Bidder shall insert credit amount as rate Rs. 28,340.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

MS MAYA PRAKASH GOEL AND SONS

M/S G. K. SUTHAR

GARGO TRADERS

DEEP CHANDRA JOSHI

SANJAY MITTAL

C. M. AGARWAL AND CO