Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.2 LAccepted-Finance VILL NOWGAN P O FATEHCHAK P S SABANG DIST PASCHIM MEDINIPUR PIN 721144 | MEDINIPUR WEST | WEST BENGAL | 721144 | ₹18.2 L | L1 | Accepted-Finance Lowest Bidder |
| 2 | L2₹18.3 LRejected-Finance | ₹18.3 L | L2 | Rejected-Finance Comparatively Higher Bidder |
| 3 | L3₹18.3 LRejected-Finance | ₹18.3 L | L3 | Rejected-Finance Comparatively Higher Bidder |
Tender Value
₹17.7 L
EMD Value
₹35,455
Closing Date
25 May 2026, 10:00 amClosed
Executive Engineer KKB Project Division
Temathani Sabang Paschim Medinipur 721166
Protection works to the Right Ex Zamindary Embankment of Ganapath Khal near Bhutichak Milan Tirtha Gouriya Math at Mouza - Janakibarh, GP- 10 No Bhemua 11 No Mohar, Block PS - Sabang, Dist.- Paschim Medinipur. (2nd Call)
2026_IWD_1023787_3
WBIW/EE/KKBPD/e- NIT-01/2026-27
Open Tender
CIVIL WORKS
60 days
Temathani Sabang Paschim Medinipur
Please refer Tender documents.
6 documents required · 6 mandatory
₹35,455
Yes
3 Jun 2026
11 May 2026
25 May 2026
11 May 2026
25 May 2026
12 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. | ||||||
| 1.01 | Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil | - | Cu.M | 129.91 | - | 2 |
| 2Making filter with well graded 40 mm down ballasts and laying uniformly behind weep holes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earthwork up to 30 cm depth, where necessary and compacting with wooden malllet after laying to achieve designed section as per direction of the Engineer- in - Charge (measurements will be on finished work / in stack after deducting necessary void). | ||||||
| 2.01 | 1st class brick ballast | - | Cu.M | 2,226.28 | - | 4 |
| 3 | Supply of stone / laterite boulders at site including cost of material, loading. unloading and carriage and including all incidental charges like Royalty, complete. (Royalty certificate in original from concerned authority are to be submitted along with the bill)
(Boulder 30/45 kg) | - | Cu.M | 2,812.3 | - | 5 |
| 4Labour charges for bouIder pitching on top and slope by placing required boulders (each weighing 25 Kg. and above within lead of 100 metres and all lifts) including filling the interstices with fragments as required, preparing sub-grade by cutting or filling the earth on slope upto 7.5 cm. depth, watering and ramming where necessary complete as per direction of the Engineer-in-charge. | ||||||
| 4.01 | Over Jhama Khoa / metal filter/ Geo-textile filter. | - | Cu.M | 597.09 | - | 7 |
| 5Making rectangular sausage cage with 10 SWG galvanized iron wire of 125mm. X 125mm. Mesh wire netting with proper lapping of minimum 150 mm. including sewing the joints with 12 SWG G I wire and supply of all materials and equipments including placing the sausage cage in position, filling the same with boulder or lump agreegates complete as per direction of the Engineer-in-charge but excluding the cost of boulder / lump aggregates and its carriage upto site.(Cost is excluding the cost of end pieces ) | ||||||
| 5.01 | 0.90 metre x 0.60 metre nominal section | - | Metre | 538.69 | - | 9 |
| 6Supplying, fitting, fixing end pieces for rectangular / square / circular sausages at the ends, with 10 SWG / 8 SWG G I wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wire netting,fitting etc, complete as per direction of the Engineer - in - charge. | ||||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
Tendernotice_2.pdf
PDF • 0.41 MB
SL03.pdf
Tender Documents • 0.64 MB
BOQ_2516290.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid