Certain repair to JCO or Md Accn at Sarvatra and Pardeep enclave and certain repair to internal plumbing work water supply line sanitary fitting wooden joinery steel window bed side lockers cup boards built in furniture and other misc work at Janglot

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm complete all as specified and directed.

Demolition of Wall boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

S & F Hollow Profile PVC Wall Lining consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site including aluminium Frame, complete all as specified and directed

S&F in repair PVC board 18-20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, weight not less than 3.50 Kg/Sqm complete all as specified and directed.

S&F Particle board 16mm thick, medium density, flat pressed, single layer type or three layer type, BWR grade complete all as specified and directed.

S&F continous (piano) hinges mild steel, 40mm width of flaps (when open), bright finish or electrogalvanised complete all as specified and directed.

S&F100mm long powder coated MS handle for kitchen cupboard and the like complete all as specified and directed

S&F magnetic catcher for kitchen cabinet doors and the like complete all as specified and directed.

S&F Mortice lock of Brass 4 lever, vertical type, size 100mm complete all as specified and directed.

M&L WPC Double Prelam Door Frame(Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured by an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be made from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufacture's specification & as directed

M&L WPC DOOR- SOLID CORE consisiting of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per , manufacture's specification and directed.

S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed.

S&F For Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and directed.

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and directed.

M&L For Painting to new wooden surfaces including prepration of surface and applying one coat of pink primer and two coats of synthetic paint.complete all as specified and directed.

M&L preperation of old wooden surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm complete all as specified and directed.

M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm complete all as specified and directed.

M&L For PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling of chowkats Complete all as specified and directed.

S&F For MS 300mm ordinary rat tail rod pattern springs including roller and roller plate.complete all as specified and directed.

S&F Stainless steel Butt hinges,100 mm size. complete all as specified and directed.

S&F Stainless steel handle, 150 mm size. complete all as specified and directed.

S&F Stainless steel barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for fly proofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 complete all as specified and directed.

S&F Sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed.

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise describe applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Painting to old steel surfaces including prepration applying one coat of synthetic enamel paint.complete all as specified and directed.

S&F Powder Coating aluminium single or double leaf door shutter in single or two panels with standared aluminium section weighing 0.55 kg/m including necessary jointing cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make complete all as specified and directed (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

S&F Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with double side shutters wire gauged shutter & glass glazed shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No), hinges type B-21 100mm long (4 Nos) suitable handle (4 No), tower bolt (4 Nos) complete all as specified and directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

S&F Partition wall with aluminium frame work partly panelled with 12mm thick prelaminated particle board both side decorative choice laminations and partly glazed with 5mm thick dark tinted glass, using standard aluminium sections 50.8 X 25.40 X 1.30 and 50.8 X 25.40 X 1.19 to wall, floor, ceiling complete all as specified and directed. Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

M&L For 12mm thick Toughned glass doors, automatic doors and similar work with SS mortice 65 mm 4 levers lock and alongwith stainless steel 2 nos handles of size 450 mm including cutting to shape, drilling holes etc complete all as specified and directed. (Note : Design of glass as approved by Garrison Engineer).

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F Aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair Stainless Steel 0.90mm thick sheet. plate rack of size 900mm x 900mm x 250mm complete all as specified and directed

S&F in repair Stainless Steel 0.90mm thick sheet. plate rack of size 600mm x 600mm x 250mm complete all as specified and directed

S&F in repair Sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed. Cera Cat Part No: DIANA LITE B4622101- Gloss finish or equivalent in Jaquar/Prayag/Kohler.

S&F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin/sink complete all as specified and directed

S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and directed Cera Cat Part No: F2002105 or equivalent in Jaquar/Prayag/Kohler.

S&F in repair 15 mm CP long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F in repair CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed. Cat Part No: F7020111AB or equivalent in Jaquar/Prayag/Kohler.

S&F Cast Copper alloy, Chromium plated washing machine bib cock with flange and fixed 15 mm bore complete all as specified and directed

S&F stainless Steel 6 pin cloth hanger wall mounted bathroom hanger complete all as specified and directed

S&F Bathroom Cabinet with mirror plastic strong and heavy rich look 6 selves storage organiser of size 450 x 300 mm complete all as specified and directed.

S&F Stainless Steel high grade material, double soap dish complete all as specified and directed

S&F in repairs Fancy type Toilet paper holder of brass, chromium plated, complete all as specified and directed.

S&F in repair chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking including making connections and fixed in position complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

Refixing only with new fittings 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

Refixing only with new fittings 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

S&F of 25mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

Refixing only with new fittings 25mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

S&F in repair Vitreous china urinal Flat Back Half stall type (white) of Size 375x390x590mm minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe complete all as specified and directed.Cera Cat Part No: Chrys S4020103 or equivalent in Jaquar/Prayag/Kohler.

S&F in repair vitreous china urinal partition white of size 310 x 700mm complete all as specified and directed.

S&F in repair Vitreous china wash basin white, flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe,complete all as specified and directed. Cera Cat Part No: Cana S2020119 or equivalent in Jaquar/Prayag/Kohler.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair internal component part (except PVC body) of PVC flushing cistern of capacith 10 litres including ball valve complete all as specified and directed.

S&F 20mm dia Stainless steel Curtain Rod with Brackets & Finials etc. complete all as specified and directed.

S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed. Cera Cat Part No: Congo B1010112 or equivalent in Jaquar/Prayag/Kohler.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed.Cera Cat Part No: COVYNA S3010109 or equivalent in Jaquar/Prayag/Kohler.

S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed. Cera Cat Part No: S1053121 or equivalent in Jaquar/Prayag/Kohler.

S&F in repairs Plastic Water Tank Cover (LID) Triple Threaded for 500 to 1000 Litre in colour White/Black, complete all as specified and directed.

S&F in repair EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

S&F 75mm dia PVC (SWR) P traps, including jointing to waste pipe with solvent cement complete all as specified and directed.

S&F in repair PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats.complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.Cera Cat Part No: F5014103CH or equivalent in Jaquar/Prayag/Kohler.

S&F in repairs Towel ring Chrome plated fixed with chromium plated brass screws and wooden/plastic cleats (min wt 90 gms) complete all as specified and directed.

S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 15 mm bore of pipe all as specified & directed.

S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 20 mm bore of pipe all as specified & directed.

Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the word "CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified and directed.

Disconnecting existing tanks, setting side for repairing, cleaning and removing all scale and dirt, etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipe etc of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word" CLEANED ON WITH DATE' with while paint including replacement of broken/unserviceable fitting such as Elbow, Tee, socket, nipple of any size etc complete all as specified and directed.

M&L For Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L For Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4, on external surface, etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6, on internal surface, etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of distemper oil emulsion on plastered surface complete all as specified and directed.

M&L for preparation of new plastered surface and applying 3mm thick wall care putty on plastered surfaces and over applying two coats of distemper oil emulsion complete all as spd and directed.

M&L Preparation of old plastered surfaces and applying 3mm thick wall care putty on plastered surfaces and over applying two coats of distemper oil emulsion.complete all as specified and directed.

M&L Applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots complete all as specified and directed.

M&L Rendering 5mm thick in CM 1:3, on ceiling, etc. finished even and smooth without using extra cement and Preparation of new pastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.

M&L for preparation of Old plastered surface and applying three coats of white wash on ceiling.complete all as specified and directed.

M&L For Preparation of old white washed surfaces of wall (plastered or unplastered) for white washing and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of colour wash on wall complete all as specified and directed.

M&L preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint. complete all as specified and directed.

Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L 75 mm thick 1:3:6,Type C-2 (using 40mm graded crushed stone aggregate) in plinth protection etc.laid in alternate bays complete all as specified and directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F Figured glass 3mm thick , pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Taking down, dismantling of broken/loose portion of chajja , facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint) chajja upto 2nd floor complete all as specified and directed.

M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.

M&L For 15mm thick screed in CM 1:6 at roof Top Surfaces for smoothening surface of laying APP membrane complete all as specified and directed.

M&L For Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane of any description, over 10cm in width or girth,not otherwise described.complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B-1,using 20 mm graded crushed stone aggregate as in shelves etc including necessary form work complete all as specified and directed.

M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed

Dismantling of ceiling asbestos cement board any thickness including cover fillites complete all as specified and directed

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butter fly clips. complete all as specified and directed

S & F Hollow Profile PVC ceiling consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site Incl Aluminium Frame, complete all as specified and directed

S&F in repair One piece EWC S Concealed with Premium plastic seat Cover and twin Flush fittings, etc complete all as specified and directed Cera Cat Part No: Cattler S1013208 or equivalent in Jaquar/Prayag/Kohler.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L For Glazed ceramic coloured tiles in vertical surfaces 450x300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in C.M 1: 4 . complete all as specified and directed

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) Size of tile 400 x 400mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed.

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) size of tile 600 x 600mm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed.

S&F Virified Ceramic in dark shade tiles 10 mm thick (square/ rectangular) polished, size of tile 600 x 600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed .

Taking down cement plaster/tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Vitrified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match Complete all as specified and directed .

Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with grey cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed

Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed .

Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position complete all as specified and directed

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A complete all as specified and directed

S&F in repair gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair gun metal gate valve 25mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm Brass CP wall mixer with hand shower for mixing hot & cold water screwed down for iron pipe complete all as specified and directed .Cera Cat Part No: F1021401 or equivalent in Jaquar/Prayag/Kohler.

S&F in repair 15mm CP center hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Cera Cat Part No: F2008461 or equivalent in Jaquar/Prayag/Kohler.

S & F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall/floor complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall/floor complete all as specified and directed

S & F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair complete all as specified and directed

S&F in repairs for 110mm dia bore PVC SWR junction single (Single T) equal or unequal complete all as specified and directed

S&F in repairs for 75mm dia bore PVC SWR junction single (Single T) equal or unequal complete all as specified and directed

S&F in repairs for 110mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed

S&F in repairs for 75mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed

S&F PVC (SWR) Vent cowl 110 mm bore in repair complete all as specified and directed

S&F PVC (SWR) Vent cowl 75 mm bore in repair complete all as specified and directed

Cutting existing steel tubing for alterations or additions, for bore of pipe 15mm complete all as specified and directed.

Cutting existing steel tubing for alterations or additions, for bore of pipe 20mm complete all as specified and directed.

Cutting existing steel tubing for alterations or additions, for bore of pipe 25mm complete all as specified and directed.

Screwing existing steel tubing for alterations or additions,for bore of pipe 15mm.complete all as specified and directed.

Screwing existing steel tubing for alterations or additions,for bore of pipe 20mm.complete all as specified and directed.

Screwing existing steel tubing for alterations or additions,for bore of pipe 25mm.complete all as specified and directed.

S&F 3-Layer PP-R (Polypropylener random copolymer) 16 mm (outer dia) concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

S&F 3-Layer PP-R (Polypropylener random copolymer) 20 mm (outer dia) concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) complete all as specified and directed

M&L for repairing steel window by adjusting and welding the hinges complete all as specified and directed

S&F in repair steel handle left/right for steel window 150mm size complete all as specified and directed.

S&F in repair steel stays 300mm length for steel window complete all as specified and directed.

M&L for Precast Cover Slab, Gray Steel Fiber reinforced concrete 600x600mm Medium duty solid cover with frame complete all as specified and directed

M&L for Precast Cover Slab, Gray Steel Fiber reinforced concrete 750x750mm Medium duty solid cover with frame complete all as specified and directed.

M&L for washed stone grit plaster on exteior wall in two layers 12mm cement plaster 1:4 (1cement :4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer@ 3kg of cement /sqm, top layer 15mm thick cement plaster 1:0.5:2(1 Cement:0.5 coarse sand:2 stone chipping 10mm nominal size) in panel with groove all around as per approved pattern including scrubing and washing the top layer with brushes and water to expose the stoe chipping complete all as specified and directed.

M&L for cutting, grinding and polishingover terazzo, marble/kota stone flooring/skirting/dado etc complete all as specified and directed

M&L Granite Black Colour of any type 18 to 20mm thick machine cut as in cooking plateforms and over 20 mm screed bed in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc complete all as specified and directed.

M/s GIrdhari Lal Rakesh Kumar (BID ID -3104338)

Ms Narinder Kumar Sehgal (BID ID -3103464)

M/S SATYA SAI CONSTRUCTION (BID ID -3103260)