CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA WITH ELECTRIFICATION

Name of Work CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA WITH ELECTRIFICATION Estimated Cost in Rs. 5329918 Months

Sl No. Items Requirement

Name of the contractor

Address of the contractor

1 Earnest Money (A) As prescribed in Tender document duly pledged in Favour of EE Patna Division Patna.

Bid Security Amount - Rs.

2 Character Certificate No. with Issue date.

3 VAT Registration No.

5 Average Annual Financial Turnover of Last Three Years

6 Experience of doing work of similar nature

7 Details of Engg. Set up for successful completion of work

8 Details of Tools & Plants

9 Details of Financial availability through Bank and/or self

10 Necessary Undertakings

11 Bidding Capacity (Provide the Amount)

12 Timely Completion (Certificate of the Concerned Executive Engineer)

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer Work Circle-01

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA,

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 13.93 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 13.93 123.9

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 166.52 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 8.85 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

5 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Cu.M 4.75 3434 Rs. Three Thousand Four Hundred Thirty Four Only

6 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. Per 50 kg. cement 155 57.16 Rs. Fifty Seven And Sixteen Paise Only

7 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. Sq.m 11.71 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

8 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balcnies and access platform. Sq.m 0.000 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

9 5.9.4 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cost in situ) Sq.m 0.999 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

10 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 203.2 404.7 Rs. Four Hundred Four And Seventy Paise Only

11 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 89.5 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

12 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs,(excluding landings) except spiral-staircaces. Sq.m 46.09 439.9 Rs. Four Hundred Thirty Nine And Ninety Paise Only

13 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade,Chajjas, corbels etc. including edges Sq.m 30.32 550.9 Rs. Five Hundred Fifty And Ninety Paise Only

14 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 2395.87 94.5 Rs. Ninety Four And Fifty Paise Only

15 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 1817.96 92.6 Rs. Ninety Two And Sixty Paise Only

16 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 4881.53 90.8 Rs. Ninety And Eighty Paise Only

17 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 282.05 91.7 Rs. Ninety One And Seventy Paise Only

18 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 26.805 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

19 5.33A.2.1+ 5.33B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts: Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 9.64 5458 Rs. Five Thousand Four Hundred Fifty Eight Only

20 5.33A.2.2+ 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.:Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 5841.7 Rs. Five Thousand Eight Hundred Fourty One And Seventy Paise Only

21 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 27.24 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

22 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) : Extra tor Brick work in superstructure above plinth level upto floor V cum Cu.M 0.999 5765.2 Rs. Five Thousand Seven Hundred Sixty Five And Twenty Paise Only

23 6.45.1 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 0.000 723 Rs. Seven Hundred Twenty Three Only

24 6.48A Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron concrete (1:4:8), over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. M 57.93 582.5 Rs. Five Hundred Eighty Two And Fifty Paise Only

25 8.2.1.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Rajnagar plain white marble /Udaipur green marble/Zebra block marble:Area of slab up to 0.50 sqm. Sq.M 0.999 2458 Rs. Two Thousand Four Hundred Fifty Eight Only

26 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including stainless steel butt hinges with necessary screws. Sq.m 24.67 2845.6 Rs. Two Thousand Eight Hundred Fourty Five And Sixty Paise Only

27 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete: Fixed to steel windows by welding. KG 0.999 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

28 9.96.1 Providing and fixing alluminium sliding door bolt anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to rquired colour and shade with nuts and screws etc. complete : 300 x 16mm Each 12 235.5 Rs. Two Hundred Thirty Five And Fifty Paise Only

29 9.97.1 Providing and fixing alluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. complete : 300 x 10mm Each 16 111.4 Rs. One Hundred Eleven And Fourty Paise Only

30 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 125mm Each 16 57.1 Rs. Fifty Seven And Ten Paise Only

31 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper Each 9 60.8 Rs. Sixty And Eighty Paise Only

32 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. Sq.M 11.06 6303.4 Rs. Six Thousand Three Hundred Three And Fourty Paise Only

33 10.12.1+ 10.13B Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections,joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with steel beading of approved shape and section with screw insted of glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer: including the cost of metal beading and other fitting except necessary hinges or pivots as required: Steel windows Sq.M 24.86 3435.6 Rs. Three Thousand Four Hundred Thirty Five And Sixty Paise Only

34 10.15.1.1 Providing and fixing pressed steel door confirming IS code 351 manufactured from commercial mild steel sheet of 1.25 mm thickness including higes, jamb, lock jamb , bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechinical means, adjustable lugs with split end tail to each jam including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile B, Fixing with adjustable lugs with split end tail to each jamb M 64.94 405.8 Rs. Four Hundred Five And Eighty Paise Only

35 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. Each 15 174.6 Rs. One Hundred Seventy Four And Sixty Paise Only

36 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 356.25 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

37 10.33.3 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer:G.I. Pipes 40 mm nominal bore (class - B) KG 91.88 150 Rs. One Hundred Fifty Only

38 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate Sq.M 134.66 289.1 Rs. Two Hundred Eighty Nine And Ten Paise Only

39 11.19.1 Chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade using white cement. Sq.M 4.46 970.2 Rs. Nine Hundred Seventy And Twenty Paise Only

40 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4: 20 to 25 mm thick. Sq.M 15.02 1252.7 Rs. One Thousand Two Hundred Fifty Two And Seventy Paise Only

41 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm. Sq.M 9.82 1334.9 Rs. One Thousand Three Hundred Thirty Four And Ninety Paise Only

42 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.M 60.98 795 Rs. Seven Hundred Ninety Five Only

43 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. Sq.M 36.54 686.8 Rs. Six Hundred Eighty Six And Eighty Paise Only

44 11.41.2 Providing and laying vitrifed floor tiles in different sizes { thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete: Size of Tile 60 x 60 cm. Sq.M 100.2 1638.8 Rs. One Thousand Six Hundred Thirty Eight And Eighty Paise Only

45 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete : Size of Tile 600 x 600 mm. Sq.M 11.82 1191.8 Rs. One Thousand One Hundred Ninety One And Eighty Paise Only

46 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

47 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 18.29 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

48 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 4 132 Rs. One Hundred Thirty Two Only

49 12.79.6.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Shoe Each 4 115.95 Rs. One Hundred Fifteen And Ninety Five Paise Only

50 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 51 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

51 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diametre and weighing not less than 440 grams. Each 10 47.9 Rs. Fourty Seven And Ninety Paise Only

52 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 0.400 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

53 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 124.97 203.6 Rs. Two Hundred Three And Sixty Paise Only

54 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 100.19 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

55 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 204.21 137 Rs. One Hundred Thirty Seven Only

56 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give and even shade: New work (two or more coats) over and including priming coat with cement primer Sq.M 408.29 102.3 Rs. One Hundred Two And Thirty Paise Only

57 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.M 612.5 105.4 Rs. One Hundred Five And Fourty Paise Only

58 13.94.1+ 13.81.3 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture : Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 59.22 151.1 Rs. One Hundred Fifty One And Ten Paise Only

59 20.2.1 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete,including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap): 300 mm dia piles. M 341 902.6 Rs. Nine Hundred Two And Sixty Paise Only

60 20.3A.2 63 CM (25) UNDER -REAM Making 63 cm (25) dia under ream at required with hand auger of approved quality in ordinary soil (vide classification of soil ifem - A) true to plumb and without eccentri city in my stage of opration and disposal of the excavated earth up to 50 mts lead in eluding all lifts , all complete as per approved design and direction of (E/l) Each 50 190.2 Rs. One Hundred Ninety And Twenty Paise Only

61 21.3.3 Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc.with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness. Sq.m 1.49 1285.6 Rs. One Thousand Two Hundred Eighty Five And Sixty Paise Only

62 Extra cost of brick 100A Patna Urban Zone Per %o 0.000 1420.51 Rs. One Thousand Four Hundred Twenty And Fifty One Paise Only

63 Extra cost of slag cement Patna Urban Zone Per bag 1740 11.73 Rs. Eleven And Seventy Three Paise Only

64 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.799 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

65 Do--do-- (b) Coarse sand ( Lead 40 Km pucca from Koilwer work site) Cu.M 0.599 Rs. Nine Hundred Eleven And Ninety Paise Only

66 Do-do- (b) Stone chips ( Lead 101 Km Pucca from Manpur to work site ) Cu.M 0.200 Rs. Two Thousand Five And Two Paise Only

67 Do-do- (c) Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 168.78 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Thirty Nine Lakh Fifty Thousand Two Hundred Nine Only

Numbers of item 67 (Sixty Seven)

Note :- (1) All types of brick-work, concrete work, plaster work, flooring and other cement related items of work include cost of curing and execution of works will be as per guidance of National Building code and direction of E/I. (2) NOTHING EXTRA repeat NOTHING EXTRA shall be paid on account of carriage and no claim whatsoever shall be entertained in this respect. If actual lead is less than above mentioned lead payment will be made as per actual lead.

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA, Sanitary (SANITARY) 35 Cft Septic Tank 1 No. & 4'-0" dia Soak pit- 1 no

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 14.83 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.999 3998.1

3 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)( Foundation, Band at P.L.& S.Tank Cover) Cu.M 0.49 4232.4 Rs. Four Thousand Two Hundred Thirty Two And Fourty Paise Only

4 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 35 94.5 Rs. Ninety Four And Fifty Paise Only

5 6.1.12C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand) Cu.M 5.52 5116.3 Rs. Five Thousand One Hundred Sixteen And Thirty Paise Only

6 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 1.34 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 4.37 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

8 12.78.1 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 75mm diameter M 0.000 162.7 Rs. One Hundred Sixty Two And Seventy Paise Only

9 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 6.4 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

10 12.79.3.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75 x 75 x 75mm dia Single Jn Tee with door Each 1 141.6 Rs. One Hundred Fourty One And Sixty Paise Only

11 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 1 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

12 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 2 190.7 Rs. One Hundred Ninety And Seventy Paise Only

13 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 2 91.8 Rs. Ninety One And Eighty Paise Only

14 12.79.5.1+ 12.81 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm Floor trap Each 2 139.7 Rs. One Hundred Thirty Nine And Seventy Paise Only

15 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 1 132 Rs. One Hundred Thirty Two Only

16 12.80.1 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 75mm dia clip Each 3 184.1 Rs. One Hundred Eighty Four And Ten Paise Only

17 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 3 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

18 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 10.66 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

19 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 16.36 203.6 Rs. Two Hundred Three And Sixty Paise Only

20 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 4.79 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

21 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 2 4470.9 Rs. Four Thousand Four Hundred Seventy And Ninety Paise Only

22 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 3 3723.2 Rs. Three Thousand Seven Hundred Twenty Three And Twenty Paise Only

23 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P.brass pillar tap Each 3 2135.8 Rs. Two Thousand One Hundred Thirty Five And Eighty Paise Only

24 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks Each 3 198.5 Rs. One Hundred Ninety Eight And Fifty Paise Only

25 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe M 15 410.7 Rs. Four Hundred Ten And Seventy Paise Only

26 19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar Each 4 310.9 Rs. Three Hundred Ten And Ninety Paise Only

27 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality:LD 2.5:Rectangular shape 600x450 mm internal dimensions Each 1 1120.6 Rs. One Thousand One Hundred Twenty And Sixty Paise Only

28 19.30.1.1 Constructing brick masonry chamber for underground C.I.Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 4 4266.8 Rs. Four Thousand Two Hundred Sixty Six And Eighty Paise Only

29 Br. Providing brick bats and filling the same in soak pit as per specificarion and direction of engineer in charge. Cu.M 3.03 1197.51 Rs. One Thousand One Hundred Ninety Seven And Fifty One Paise Only

30 Extra cost of brick 100A Patna Urban Zone Per %o 0.000 1420.51 Rs. One Thousand Four Hundred Twenty And Fifty One Paise Only

31 Extra cost of slag cement Patna Urban Zone Per bag 23 11.73 Rs. Eleven And Seventy Three Paise Only

32 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

33 Do--do-- (b) Coarse sand ( Lead 40 Km pucca from Koilwer work site) Cu.M 0.999 Rs. Nine Hundred Eleven And Ninety Paise Only

34 Do-do- (b) Stone chips ( Lead 101 Km Pucca from Manpur to work site ) Cu.M 1.47 Rs. Two Thousand Five And Two Paise Only

Rs. One Lakh Thirty Thousand Seventy Only

Numbers of item 29 (Thirty Nine)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA, Water Supply

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 15 mm nominal outer dia Pipes M 10 278.2 Rs. Two Hundred Seventy Eight And Twenty Paise Only

2 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 20 mm nominal outer dia Pipes M 10 350.8

3 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:25 mm nominal outer dia Pipes M 10 294.7 Rs. Two Hundred Ninety Four And Seventy Paise Only

4 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:32 mm nominal outer dia Pipes M 10 359.1 Rs. Three Hundred Fifty Nine And Ten Paise Only

5 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:40 mm nominal outer dia Pipes M 25 477.6 Rs. Four Hundred Seventy Seven And Sixty Paise Only

6 18.10.4 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc:Internal work - Exposed on wall:32 mm dia nominal bore M 20 457.8 Rs. Four Hundred Fifty Seven And Eighty Paise Only

7 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 1 532.3 Rs. Five Hundred Thirty Two And Thirty Paise Only

8 18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore Each 1 589.9 Rs. Five Hundred Eighty Nine And Ninety Paise Only

9 18.19.2.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore:Horizontal Each 1 677.6 Rs. Six Hundred Seventy Seven And Sixty Paise Only

10 18.46.2 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :20 mm nominal bore Each 1 185.6 Rs. One Hundred Eighty Five And Sixty Paise Only

11 18.46.3 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :25 mm nominal bore Each 5 265.9 Rs. Two Hundred Sixty Five And Ninety Paise Only

12 18.46.4 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :32 mm nominal bore Each 5 306 Rs. Three Hundred Six Only

13 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 1000 9.7 Rs. Nine And Seventy Paise Only

14 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms: 15 mm nominal bore Each 9 715.1 Rs. Seven Hundred Fifteen And Ten Paise Only

15 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:15 mm nominal bore Each 2 594.8 Rs. Five Hundred Ninety Four And Eighty Paise Only

16 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Each 5 217.1 Rs. Two Hundred Seventeen And Ten Paise Only

Rs. Fifty Seven Thousand One Hundred Eighty Only

Numbers of item 16 (Sixteen)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA, P.V.C.pipe- DEEP TUBEWELL 300mmx150mmx106.68m

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:External work:32 mm dia nominal bore M 24.4 381.7 Rs. Three Hundred Eighty One And Seventy Paise Only

2 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of allequipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level:All type of soil:300 mm dia M 106.68 567.9

3 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 86.68 660.1 Rs. Six Hundred Sixty And Ten Paise Only

4 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 20 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

5 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. Cum 0.000 1343.2 Rs. One Thousand Three Hundred Fourty Three And Twenty Paise Only

6 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hour 12 916.8 Rs. Nine Hundred Sixteen And Eighty Paise Only

7 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

8 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

9 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia Each 1 281.8 Rs. Two Hundred Eighty One And Eighty Paise Only

10 Supplying, fitting & fixing submersible motor pump (1 H.P.) of Crompton or any other approved I.S.I. make complete with cable wire, fited & fixed complete as per specification and direction of Engineer I/C with all accesories etc. all complete job. Per Set 1 13500 Rs. Tthirteen Thousand Five Hundred Only

11 Supplying 1 HP fully automatic Crompton single phase 220 volts starter on a common board with 16 amps Havels make DP main switch 1 No. suitable voltameter (ISI make ) 1 No. ampere meter (ISI make) 1 no, complete with panel all taxes etc. complete job. Per Set 1 2450 Rs. Two Thousand Four Hundred Fifty Only

Rs. One Lakh Seventy Seven Thousand One Hundred Fifty Two Only

Numbers of item 11 (Eleven)

BILL OF QUANTITY INTERNAL ELECTRICAL WIRING & ELECTRIC INSTALLATION WORK IN VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA

Electrification Work

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.3.3 Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required. (a) Group C Per Point 65 1146 Rs. One Thousand One Hundred Fourty Six Only

2 1.4 Wiring for twin control light point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable size G.I. Box etc. as required. Per Point 2 1248

3 1.5 Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. Per Mtr. 60 309 Rs. Three Hundred Nine Only

4 1.7.2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. CKT- (2 x2.5mm2 + 1x2.5 mm2 earth wire) Per Mtr. 272 246 Rs. Two Hundred Fourty Six Only

5 1.7.11 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. 4 X 6 sq, mm + 1 X 6 sq. mm earth wire Per Mtr. 35 660 Rs. Six Hundred Sixty Only

6 1.7.12 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. 4 X 10 sq. mm + 1 X 6 sq. mm earth wire Per Mtr. 6 925 Rs. Nine Hundred Twenty Five Only

7 1.25 Supplying and fixing stepped type electronic fan regulatoron th existing modular plate switch box including connections but excluding modular plate etc. as required. Each 9 358 Rs. Three Hundred Fifty Eight Only

8 Sl.No. 1.28.7+ 1.27.6+ 1.24.4+ 1.24.1+ 1.24.5+ 1.24.3+ Code 2318+ 2.12.1 Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 12 module Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 12 modular (135mm x 205mm x 60mm) Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. 3 pin , 5/6 amps socket outlet Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amps switch Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. 16/20 amps, 6 pin socket outlet Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amps switch Pilot lamp for indicator. Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, Single Pole Each 3 2067.9 Rs. Two Thousand Sixty Seven And Ninety Paise Only

9 1.31 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 10 414 Rs. Four Hundred Fourteen Only

10 1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Each 5 531 Rs. Five Hundred Thirty One Only

11 1.33 Supplying and fixing 2 Pin, 6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. Each 40 64 Rs. Sixty Four Only

12 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 21 80 Rs. Eighty Only

13 2.4.1 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 100 A, 30 KA, FPMCCB Each 1 8172 Rs. Eight Thousand One Hundred Seventy Two Only

14 2.5.2 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 100A Each 1 5019 Rs. Five Thousand Nineteen Only

15 2.7.2 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 63 A Each 1 8480 Rs. Eight Thousand Four Hundred Eighty Only

16 2.9.1 Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way (4+12) single door horizontal type Each 2 4184 Rs. Four Thousand One Hundred Eighty Four Only

17 2.12.1 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, Single Pole Each 24 237 Rs. Two Hundred Thirty Seven Only

18 2.12.8 Supptying and fixing following rating, 24Al4L5 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required' 40 A to 63 A, TP&N Each 2 2329 Rs. Two Thousand Three Hundred Twenty Nine Only

19 2.19 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 4 1513 Rs. One Thousand Five Hundred Tthirteen Only

20 2.2 Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. Each 1 214 Rs. Two Hundred Fourteen Only

21 3.13 Supplying and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.l. pipe from earth electrode including connecion with copper thimble excavation and refilling etc. as required. Metre 7 367 Rs. Three Hundred Sixty Seven Only

22 3.21 Providing and fixing 4.0 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

23 5.1 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 10 521 Rs. Five Hundred Twenty One Only

24 5.10. Supplying and fixing 70112 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 3 1275 Rs. One Thousand Two Hundred Seventy Five Only

25 5.14.2 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.45 watt Each 5 3382 Rs. Three Thousand Three Hundred Eighty Two Only

26 6.1.4 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required9/10 watt LED lamp 12 watt Each 25 161 Rs. One Hundred Sixty One Only

27 7.1.2 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq. mm and upto 95 sq. mm Metre 80 326 Rs. Three Hundred Twenty Six Only

28 7.7.9 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.50 sq. mm, 3.5 core Metre 90 561 Rs. Five Hundred Sixty One Only

29 8.4.1 Supplying and embedding following dia G.t. pipe (medium class) in pole collar/ foundatlon (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia Metre 2 543 Rs. Five Hundred Fourty Three Only

30 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulatorand complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Sft 6 1809 Rs. One Thousand Eight Hundred Nine Only

31 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Each 1 6536 Rs. Six Thousand Five Hundred Thirty Six Only

32 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 9 2482 Rs. Two Thousand Four Hundred Eighty Two Only

33 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 300 mm sweep Each 3 2572 Rs. Two Thousand Five Hundred Seventy Two Only

Rs. Four Lakh Thirty Two Thousand Five Hundred Fourteen Only

Numbers of item 33 (Thirty Three)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA

(Fire fighting) Provisonally Rate Approved by SE

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

II HAND APPLIANCES (INTERNAL)

1 Providing and fixing Stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever diccharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etrc. complete. (a) Capactity 6 kg. Each 4 6565 Rs. Six Thousand Five Hundred Sixty Five Only

2 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS 13869 including fixing with dash fasteners etc, complete. Capacity 4.5 Kg Each 4 7878 Rs. Seven Thousand Eight Hundred Seventy Eight Only

Rs. Fifty Seven Thousand Seven Hundred Seventy Two Only

Numbers of item 02 (Two)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA Model Estimate for Supplying Fixing & Installation Of Furniture & necessary Items, all Complete Job for Police Station Building

Furniture ANNEXURE - I

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

3 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 1 25446.3

4 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 3 7087.3 Rs. Seven Thousand Eighty Seven And Thirty Paise Only

5 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 2 4004 Rs. Four Thousand Four Only

6 ALMIRAH Storage of Size- 1980mm ( H ) x 900mm ( W ) x 500mm ( D ) - Type of Almirah Steel- Almirah steel welded with shelving cabinet. Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L and BIS Certficate.. Each 1 33458.7 Rs. Thirty Three Thousand Four Hundred Fifty Eight And Seventy Paise Only

7 RECEPTION TABLE Reception Table of size 5' Liner of size 1500 mm (W) x 870 mm (D) x 1080 mm (H) -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA ( IS: 513 ), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8 mm CRCA ( IS-513 ) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA ( IS-513 ) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA ( IS-513 ) is provided for bag hanging. The product should be Greenguard UL certified. .Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L .. Each 1 70297.7 Rs. Seventy Thousand Two Hundred Ninety Seven And Seventy Paise Only

8 RECEPTION CHAIR Mid Back Chair - Size- 700 mm ( W ) x 1055 mm ( H ) x 700 mm ( D). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height- 538 mm. Warranty- 3 Years. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level 2, Indoor Advantage Gold Certificate, Each 1 11017.6 Rs. Eleven Thousand Seventeen And Sixty Paise Only

13 METAL SINGLE BED METAL BED with 78x36x4 mattress - Structure of Metal bed frame including legs and head Structure-MS Hollow Rectangular / Square Section.Size of Rectangular Hollow section - 50 mm X 25 mm. Size of Square Hollow Section - 38 mm X 38 mm Size of Circular Hollow Sections - N.A.Thickness of Hollow Section in Structure-1.2 mm. Support Panel for placement of mattresses- MS hollow box Square Section.Thickness of support Panel -1.0 mm. Over all length of Bed - 2000 mm. Height of Bed in mm - 650 mm. Paint /Finish of MS Parts-Powder Coating. Min Powder/paint coating thickness ( Micron) - 60 micron. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 2 23751.2 Rs. Twenty Three Thousand Seven Hundred Fifty One And Twenty Paise Only

17 Dustbin 13 Litre Stainless Steel Grade-304, Capacity-13 Litre pedal operated Each 1 3554.1 Rs. Three Thousand Five Hundred Fifty Four And Ten Paise Only

20 RO Water Purifier 50 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 1 44579.7 Rs. Fourty Four Thousand Five Hundred Seventy Nine And Seventy Paise Only

22 TV 32' Fully Smart TV voice assistant, LED full HD Design, slim, glossy black design with thin bezels (VNB), suitable for compact spaces. Each 1 25534.3 Rs. Twenty Five Thousand Five Hundred Thirty Four And Thirty Paise Only

Grand Total Including GST

Rs. Two Lakh Ninety Thousand Six Hundred Sixty One Only

*** Note:-Dimension variable upto ± 30 mm is acceptable.

G E N E R A L A B S T R A C T

NAME OF WORK : CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA WITH ELECTRIFICATION Job No. GROUP- 01 OF e-N.I.T. No. 08/2026-27

Date of Tender :-

Estimated Cost in Rs. :-

Earnest Money in Rs. :-

Time of Completion :- Months

Cost of BOQ :- 10000

Bid processing fee through online mode:- As per eproc 2.

SL. NO NAME OF WORK TOTAL Rs P

2 Sanitary Installation

4 Deep Tubewell

5 Fire Fighting

Add GST @ 5.36%

6 Electrification Work

Enclosure-B.O.Q's ORDER

(1) B.O.Q. amounting to Rs.

Rs. Fifty Three Lakh Twenty Nine Thousand Nine Hundred Eighteen Only

detailed as above for Scheduled items, is herewith approved.

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, Work Circle-01

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA,

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 13.93 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 2.26 Filling available excavated earth (excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1.5M. Cu.M 13.93 123.9

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cu.M 166.52 287.3 Rs. Two Hundred Eighty Seven And Thirty Paise Only

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 8.85 3998.1 Rs. Three Thousand Nine Hundred Ninety Eight And Ten Paise Only

5 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) Cu.M 4.75 3434 Rs. Three Thousand Four Hundred Thirty Four Only

6 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. Per 50 kg. cement 155 57.16 Rs. Fifty Seven And Sixteen Paise Only

7 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. Sq.m 11.71 211.6 Rs. Two Hundred Eleven And Sixty Paise Only

8 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roots, landings, balcnies and access platform. Sq.m 0.000 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

9 5.9.4 Centring and shuttering including strutting, propping etc. and removal of form for: Shelves (Cost in situ) Sq.m 0.999 437.5 Rs. Four Hundred Thirty Seven And Fifty Paise Only

10 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth bams, griders, bressumers and contilevers. Sq.m 203.2 404.7 Rs. Four Hundred Four And Seventy Paise Only

11 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts Sq.m 89.5 494.4 Rs. Four Hundred Ninety Four And Fourty Paise Only

12 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs,(excluding landings) except spiral-staircaces. Sq.m 46.09 439.9 Rs. Four Hundred Thirty Nine And Ninety Paise Only

13 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade,Chajjas, corbels etc. including edges Sq.m 30.32 550.9 Rs. Five Hundred Fifty And Ninety Paise Only

14 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 2395.87 94.5 Rs. Ninety Four And Fifty Paise Only

15 5.22.7B Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 10mm dia. KG 1817.96 92.6 Rs. Ninety Two And Sixty Paise Only

16 5.22.7C Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 12mm dia. KG 4881.53 90.8 Rs. Ninety And Eighty Paise Only

17 5.22.7D Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 16mm dia. KG 282.05 91.7 Rs. Ninety One And Seventy Paise Only

18 5.33A.1+ 5.33.B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:Add or deduct for providing richer or leaner mixes respectively at all floor levels: Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 26.805 4921.4 Rs. Four Thousand Nine Hundred Twenty One And Fourty Paise Only

19 5.33A.2.1+ 5.33B1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Walls columns, pillars, posts cind struts: Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 9.64 5458 Rs. Five Thousand Four Hundred Fifty Eight Only

20 5.33A.2.2+ 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete :All work upto plinth level:All works above plinth level upto floor V level : Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.:Add or deduct for providing richer or leaner mixes respectively at all floor levels:Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. Cu.m 5841.7 Rs. Five Thousand Eight Hundred Fourty One And Seventy Paise Only

21 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 27.24 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

22 6.1.14C+ 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) : Extra tor Brick work in superstructure above plinth level upto floor V cum Cu.M 0.999 5765.2 Rs. Five Thousand Seven Hundred Sixty Five And Twenty Paise Only

23 6.45.1 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 3 (1 cement : 3 coarse sand) sqm 0.000 723 Rs. Seven Hundred Twenty Three Only

24 6.48A Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron concrete (1:4:8), over one brick designation 100-A flat soling in proper grade and slope at the base, the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. M 57.93 582.5 Rs. Five Hundred Eighty Two And Fifty Paise Only

25 8.2.1.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Rajnagar plain white marble /Udaipur green marble/Zebra block marble:Area of slab up to 0.50 sqm. Sq.M 0.999 2458 Rs. Two Thousand Four Hundred Fifty Eight Only

26 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including stainless steel butt hinges with necessary screws. Sq.m 24.67 2845.6 Rs. Two Thousand Eight Hundred Fourty Five And Sixty Paise Only

27 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete: Fixed to steel windows by welding. KG 0.999 144.5 Rs. One Hundred Fourty Four And Fifty Paise Only

28 9.96.1 Providing and fixing alluminium sliding door bolt anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to rquired colour and shade with nuts and screws etc. complete : 300 x 16mm Each 12 235.5 Rs. Two Hundred Thirty Five And Fifty Paise Only

29 9.97.1 Providing and fixing alluminium sliding tower bolt anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with nuts and screws etc. complete : 300 x 10mm Each 16 111.4 Rs. One Hundred Eleven And Fourty Paise Only

30 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: 125mm Each 16 57.1 Rs. Fifty Seven And Ten Paise Only

31 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper Each 9 60.8 Rs. Sixty And Eighty Paise Only

32 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. Sq.M 11.06 6303.4 Rs. Six Thousand Three Hundred Three And Fourty Paise Only

33 10.12.1+ 10.13B Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections,joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with steel beading of approved shape and section with screw insted of glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer: including the cost of metal beading and other fitting except necessary hinges or pivots as required: Steel windows Sq.M 24.86 3435.6 Rs. Three Thousand Four Hundred Thirty Five And Sixty Paise Only

34 10.15.1.1 Providing and fixing pressed steel door confirming IS code 351 manufactured from commercial mild steel sheet of 1.25 mm thickness including higes, jamb, lock jamb , bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechinical means, adjustable lugs with split end tail to each jam including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile B, Fixing with adjustable lugs with split end tail to each jamb M 64.94 405.8 Rs. Four Hundred Five And Eighty Paise Only

35 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. Each 15 174.6 Rs. One Hundred Seventy Four And Sixty Paise Only

36 10.32.2 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc as required: In gratings, frames, guard bar, ladders, railing, brackets, gets & similar works. KG 356.25 114.6 Rs. One Hundred Fourteen And Sixty Paise Only

37 10.33.3 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer:G.I. Pipes 40 mm nominal bore (class - B) KG 91.88 150 Rs. One Hundred Fifty Only

38 11.3.1 Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate Sq.M 134.66 289.1 Rs. Two Hundred Eighty Nine And Ten Paise Only

39 11.19.1 Chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade using white cement. Sq.M 4.46 970.2 Rs. Nine Hundred Seventy And Twenty Paise Only

40 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4: 20 to 25 mm thick. Sq.M 15.02 1252.7 Rs. One Thousand Two Hundred Fifty Two And Seventy Paise Only

41 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm. Sq.M 9.82 1334.9 Rs. One Thousand Three Hundred Thirty Four And Ninety Paise Only

42 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sq.M 60.98 795 Rs. Seven Hundred Ninety Five Only

43 11.37 Providing and laying Ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. Sq.M 36.54 686.8 Rs. Six Hundred Eighty Six And Eighty Paise Only

44 11.41.2 Providing and laying vitrifed floor tiles in different sizes { thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete: Size of Tile 60 x 60 cm. Sq.M 100.2 1638.8 Rs. One Thousand Six Hundred Thirty Eight And Eighty Paise Only

45 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete : Size of Tile 600 x 600 mm. Sq.M 11.82 1191.8 Rs. One Thousand One Hundred Ninety One And Eighty Paise Only

46 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

47 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 18.29 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

48 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 4 132 Rs. One Hundred Thirty Two Only

49 12.79.6.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Shoe Each 4 115.95 Rs. One Hundred Fifteen And Ninety Five Paise Only

50 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 51 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

51 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diametre and weighing not less than 440 grams. Each 10 47.9 Rs. Fourty Seven And Ninety Paise Only

52 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 0.400 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

53 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 124.97 203.6 Rs. Two Hundred Three And Sixty Paise Only

54 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 100.19 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

55 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Sq.M 204.21 137 Rs. One Hundred Thirty Seven Only

56 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give and even shade: New work (two or more coats) over and including priming coat with cement primer Sq.M 408.29 102.3 Rs. One Hundred Two And Thirty Paise Only

57 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sq.M 612.5 105.4 Rs. One Hundred Five And Fourty Paise Only

58 13.94.1+ 13.81.3 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture : Applying primer coat : With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanised iron/steel works Sq.M 59.22 151.1 Rs. One Hundred Fifty One And Ten Paise Only

59 20.2.1 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete,including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap): 300 mm dia piles. M 341 902.6 Rs. Nine Hundred Two And Sixty Paise Only

60 20.3A.2 63 CM (25) UNDER -REAM Making 63 cm (25) dia under ream at required with hand auger of approved quality in ordinary soil (vide classification of soil ifem - A) true to plumb and without eccentri city in my stage of opration and disposal of the excavated earth up to 50 mts lead in eluding all lifts , all complete as per approved design and direction of (E/l) Each 50 190.2 Rs. One Hundred Ninety And Twenty Paise Only

61 21.3.3 Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc.with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness. Sq.m 1.49 1285.6 Rs. One Thousand Two Hundred Eighty Five And Sixty Paise Only

62 Extra cost of brick 100A Patna Urban Zone Per %o 0.000 1420.51 Rs. One Thousand Four Hundred Twenty And Fifty One Paise Only

63 Extra cost of slag cement Patna Urban Zone Per bag 1740 11.73 Rs. Eleven And Seventy Three Paise Only

64 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.799 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

65 Do--do-- (b) Coarse sand ( Lead 40 Km pucca from Koilwer work site) Cu.M 0.599 Rs. Nine Hundred Eleven And Ninety Paise Only

66 Do-do- (b) Stone chips ( Lead 101 Km Pucca from Manpur to work site ) Cu.M 0.200 Rs. Two Thousand Five And Two Paise Only

67 Do-do- (c) Local Sand ( 1 Km. Kutcha + 2 Km. Pucca) Cu.M 168.78 274.46 Rs. Two Hundred Seventy Four And Fourty Six Paise Only

Rs. Thirty Nine Lakh Fifty Thousand Two Hundred Nine Only

Numbers of item 67 (Sixty Seven)

Note :- (1) All types of brick-work, concrete work, plaster work, flooring and other cement related items of work include cost of curing and execution of works will be as per guidance of National Building code and direction of E/I. (2) NOTHING EXTRA repeat NOTHING EXTRA shall be paid on account of carriage and no claim whatsoever shall be entertained in this respect. If actual lead is less than above mentioned lead payment will be made as per actual lead.

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA, Sanitary (SANITARY) 35 Cft Septic Tank 1 No. & 4'-0" dia Soak pit- 1 no

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Cu.M 14.83 360.7 Rs. Three Hundred Sixty And Seventy Paise Only

2 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level:1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) Cu.M 0.999 3998.1

3 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level : 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)( Foundation, Band at P.L.& S.Tank Cover) Cu.M 0.49 4232.4 Rs. Four Thousand Two Hundred Thirty Two And Fourty Paise Only

4 5.22.7A Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete:Thermo-Mechanically Treated bars (FE-500) 8mm dia. KG 35 94.5 Rs. Ninety Four And Fifty Paise Only

5 6.1.12C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:4(1 cement : 4 coarse sand) Cu.M 5.52 5116.3 Rs. Five Thousand One Hundred Sixteen And Thirty Paise Only

6 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) Cu.M 1.34 4923 Rs. Four Thousand Nine Hundred Twenty Three Only

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. Sq.M 4.37 283.3 Rs. Two Hundred Eighty Three And Thirty Paise Only

8 12.78.1 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 75mm diameter M 0.000 162.7 Rs. One Hundred Sixty Two And Seventy Paise Only

9 12.78.2 Providing and fixing on wall face unplasticised-PVC (working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: 110mm diameter M 6.4 257.5 Rs. Two Hundred Fifty Seven And Fifty Paise Only

10 12.79.3.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75 x 75 x 75mm dia Single Jn Tee with door Each 1 141.6 Rs. One Hundred Fourty One And Sixty Paise Only

11 12.79.3.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee with door Each 1 193.4 Rs. One Hundred Ninety Three And Fourty Paise Only

12 12.79.4.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110 x 110 x 110mm dia Single Jn Tee without door (T. Bend) Each 2 190.7 Rs. One Hundred Ninety And Seventy Paise Only

13 12.79.5.1 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm dia Plain bend Each 2 91.8 Rs. Ninety One And Eighty Paise Only

14 12.79.5.1+ 12.81 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 75mm Floor trap Each 2 139.7 Rs. One Hundred Thirty Nine And Seventy Paise Only

15 12.79.5.2 Providing & fixing on wall face unplastisised P.V.C. pipe (working pressure 4 Kg/Sq.cm) confirming to IS-4985 for severage inlcuding jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expanssion: 110mm dia Plain bend Each 1 132 Rs. One Hundred Thirty Two Only

16 12.80.1 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 75mm dia clip Each 3 184.1 Rs. One Hundred Eighty Four And Ten Paise Only

17 12.80.2 Providing and fixing unplasticised-PVC clip of approved design to unplasticised PVC by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar (1:4) 1 cement : 4 coarse sand and making good the wall etc. complete: 110mm dia clip Each 3 182.72 Rs. One Hundred Eighty Two And Seventy Two Paise Only

18 13.11.4 12mm cement plaster of mix: 1:6 (1 Cement : 6 coarse sand) Sq.M 10.66 141.5 Rs. One Hundred Fourty One And Fifty Paise Only

19 13.17.1 12mm cement plaster of mix: 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement Sq.M 16.36 203.6 Rs. Two Hundred Three And Sixty Paise Only

20 13.24.2 6mm cement plaster to ceilling of Mix : 1:4 (1 cement : 4 coarse sand) Sq.M 4.79 125.6 Rs. One Hundred Twenty Five And Sixty Paise Only

21 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 2 4470.9 Rs. Four Thousand Four Hundred Seventy And Ninety Paise Only

22 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 3 3723.2 Rs. Three Thousand Seven Hundred Twenty Three And Twenty Paise Only

23 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P.brass pillar tap Each 3 2135.8 Rs. Two Thousand One Hundred Thirty Five And Eighty Paise Only

24 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks Each 3 198.5 Rs. One Hundred Ninety Eight And Fifty Paise Only

25 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe M 15 410.7 Rs. Four Hundred Ten And Seventy Paise Only

26 19.15.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar Each 4 310.9 Rs. Three Hundred Ten And Ninety Paise Only

27 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality:LD 2.5:Rectangular shape 600x450 mm internal dimensions Each 1 1120.6 Rs. One Thousand One Hundred Twenty And Sixty Paise Only

28 19.30.1.1 Constructing brick masonry chamber for underground C.I.Inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 4 4266.8 Rs. Four Thousand Two Hundred Sixty Six And Eighty Paise Only

29 Br. Providing brick bats and filling the same in soak pit as per specificarion and direction of engineer in charge. Cu.M 3.03 1197.51 Rs. One Thousand One Hundred Ninety Seven And Fifty One Paise Only

30 Extra cost of brick 100A Patna Urban Zone Per %o 0.000 1420.51 Rs. One Thousand Four Hundred Twenty And Fifty One Paise Only

31 Extra cost of slag cement Patna Urban Zone Per bag 23 11.73 Rs. Eleven And Seventy Three Paise Only

32 Carriage of materials including loading, unloading, transporting and stacking at site as per specification and direction of E/I (a) 100 A Brick (lead 1km Kachha +7km Pucca ) %o 0.000 980.4 Rs. Nine Hundred Eighty And Fourty Paise Only

33 Do--do-- (b) Coarse sand ( Lead 40 Km pucca from Koilwer work site) Cu.M 0.999 Rs. Nine Hundred Eleven And Ninety Paise Only

34 Do-do- (b) Stone chips ( Lead 101 Km Pucca from Manpur to work site ) Cu.M 1.47 Rs. Two Thousand Five And Two Paise Only

Rs. One Lakh Thirty Thousand Seventy Only

Numbers of item 29 (Thirty Nine)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA, Water Supply

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 15 mm nominal outer dia Pipes M 10 278.2 Rs. Two Hundred Seventy Eight And Twenty Paise Only

2 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:Concealed work, including cutting chases and making good the : 20 mm nominal outer dia Pipes M 10 350.8

3 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:25 mm nominal outer dia Pipes M 10 294.7 Rs. Two Hundred Ninety Four And Seventy Paise Only

4 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:32 mm nominal outer dia Pipes M 10 359.1 Rs. Three Hundred Fifty Nine And Ten Paise Only

5 18.9.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge:External work:40 mm nominal outer dia Pipes M 25 477.6 Rs. Four Hundred Seventy Seven And Sixty Paise Only

6 18.10.4 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc:Internal work - Exposed on wall:32 mm dia nominal bore M 20 457.8 Rs. Four Hundred Fifty Seven And Eighty Paise Only

7 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore Each 1 532.3 Rs. Five Hundred Thirty Two And Thirty Paise Only

8 18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore Each 1 589.9 Rs. Five Hundred Eighty Nine And Ninety Paise Only

9 18.19.2.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore:Horizontal Each 1 677.6 Rs. Six Hundred Seventy Seven And Sixty Paise Only

10 18.46.2 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :20 mm nominal bore Each 1 185.6 Rs. One Hundred Eighty Five And Sixty Paise Only

11 18.46.3 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :25 mm nominal bore Each 5 265.9 Rs. Two Hundred Sixty Five And Ninety Paise Only

12 18.46.4 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete :32 mm nominal bore Each 5 306 Rs. Three Hundred Six Only

13 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Per Litre 1000 9.7 Rs. Nine And Seventy Paise Only

14 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms: 15 mm nominal bore Each 9 715.1 Rs. Seven Hundred Fifteen And Ten Paise Only

15 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:15 mm nominal bore Each 2 594.8 Rs. Five Hundred Ninety Four And Eighty Paise Only

16 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Each 5 217.1 Rs. Two Hundred Seventeen And Ten Paise Only

Rs. Fifty Seven Thousand One Hundred Eighty Only

Numbers of item 16 (Sixteen)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA, P.V.C.pipe- DEEP TUBEWELL 300mmx150mmx106.68m

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

1 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:External work:32 mm dia nominal bore M 24.4 381.7 Rs. Three Hundred Eighty One And Seventy Paise Only

2 24.2.1.1 Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hire & running charges of allequipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level:All type of soil:300 mm dia M 106.68 567.9

3 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge:150 mm nominal size dia M 86.68 660.1 Rs. Six Hundred Sixty And Ten Paise Only

4 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818,including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge:150 mm nominal size dia M 20 673.5 Rs. Six Hundred Seventy Three And Fifty Paise Only

5 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-incharge. Cum 0.000 1343.2 Rs. One Thousand Three Hundred Fourty Three And Twenty Paise Only

6 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. Hour 12 916.8 Rs. Nine Hundred Sixteen And Eighty Paise Only

7 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of:150 mm dia Each 1 210.7 Rs. Two Hundred Ten And Seventy Paise Only

8 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete:150 mm clamp Each 1 1531.4 Rs. One Thousand Five Hundred Thirty One And Fourty Paise Only

9 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I): 150 mm dia Each 1 281.8 Rs. Two Hundred Eighty One And Eighty Paise Only

10 Supplying, fitting & fixing submersible motor pump (1 H.P.) of Crompton or any other approved I.S.I. make complete with cable wire, fited & fixed complete as per specification and direction of Engineer I/C with all accesories etc. all complete job. Per Set 1 13500 Rs. Tthirteen Thousand Five Hundred Only

11 Supplying 1 HP fully automatic Crompton single phase 220 volts starter on a common board with 16 amps Havels make DP main switch 1 No. suitable voltameter (ISI make ) 1 No. ampere meter (ISI make) 1 no, complete with panel all taxes etc. complete job. Per Set 1 2450 Rs. Two Thousand Four Hundred Fifty Only

Rs. One Lakh Seventy Seven Thousand One Hundred Fifty Two Only

Numbers of item 11 (Eleven)

BILL OF QUANTITY INTERNAL ELECTRICAL WIRING & ELECTRIC INSTALLATION WORK IN VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA

Electrification Work

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

1 1.3.3 Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required. (a) Group C Per Point 65 1146 Rs. One Thousand One Hundred Fourty Six Only

2 1.4 Wiring for twin control light point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable size G.I. Box etc. as required. Per Point 2 1248

3 1.5 Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. Per Mtr. 60 309 Rs. Three Hundred Nine Only

4 1.7.2 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. CKT- (2 x2.5mm2 + 1x2.5 mm2 earth wire) Per Mtr. 272 246 Rs. Two Hundred Fourty Six Only

5 1.7.11 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. 4 X 6 sq, mm + 1 X 6 sq. mm earth wire Per Mtr. 35 660 Rs. Six Hundred Sixty Only

6 1.7.12 Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. 4 X 10 sq. mm + 1 X 6 sq. mm earth wire Per Mtr. 6 925 Rs. Nine Hundred Twenty Five Only

7 1.25 Supplying and fixing stepped type electronic fan regulatoron th existing modular plate switch box including connections but excluding modular plate etc. as required. Each 9 358 Rs. Three Hundred Fifty Eight Only

8 Sl.No. 1.28.7+ 1.27.6+ 1.24.4+ 1.24.1+ 1.24.5+ 1.24.3+ Code 2318+ 2.12.1 Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 12 module Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 12 modular (135mm x 205mm x 60mm) Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. 3 pin , 5/6 amps socket outlet Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amps switch Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. 16/20 amps, 6 pin socket outlet Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amps switch Pilot lamp for indicator. Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, Single Pole Each 3 2067.9 Rs. Two Thousand Sixty Seven And Ninety Paise Only

9 1.31 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Each 10 414 Rs. Four Hundred Fourteen Only

10 1.32 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Each 5 531 Rs. Five Hundred Thirty One Only

11 1.33 Supplying and fixing 2 Pin, 6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. Each 40 64 Rs. Sixty Four Only

12 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. Each 21 80 Rs. Eighty Only

13 2.4.1 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required' 100 A, 30 KA, FPMCCB Each 1 8172 Rs. Eight Thousand One Hundred Seventy Two Only

14 2.5.2 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 100A Each 1 5019 Rs. Five Thousand Nineteen Only

15 2.7.2 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 63 A Each 1 8480 Rs. Eight Thousand Four Hundred Eighty Only

16 2.9.1 Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way (4+12) single door horizontal type Each 2 4184 Rs. Four Thousand One Hundred Eighty Four Only

17 2.12.1 Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, Single Pole Each 24 237 Rs. Two Hundred Thirty Seven Only

18 2.12.8 Supptying and fixing following rating, 24Al4L5 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required' 40 A to 63 A, TP&N Each 2 2329 Rs. Two Thousand Three Hundred Twenty Nine Only

19 2.19 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. Each 4 1513 Rs. One Thousand Five Hundred Tthirteen Only

20 2.2 Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. Each 1 214 Rs. Two Hundred Fourteen Only

21 3.13 Supplying and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.l. pipe from earth electrode including connecion with copper thimble excavation and refilling etc. as required. Metre 7 367 Rs. Three Hundred Sixty Seven Only

22 3.21 Providing and fixing 4.0 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Set 1 16675 Rs. Sixteen Thousand Six Hundred Seventy Five Only

23 5.1 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. Each 10 521 Rs. Five Hundred Twenty One Only

24 5.10. Supplying and fixing 70112 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. Each 3 1275 Rs. One Thousand Two Hundred Seventy Five Only

25 5.14.2 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.45 watt Each 5 3382 Rs. Three Thousand Three Hundred Eighty Two Only

26 6.1.4 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required9/10 watt LED lamp 12 watt Each 25 161 Rs. One Hundred Sixty One Only

27 7.1.2 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq. mm and upto 95 sq. mm Metre 80 326 Rs. Three Hundred Twenty Six Only

28 7.7.9 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.50 sq. mm, 3.5 core Metre 90 561 Rs. Five Hundred Sixty One Only

29 8.4.1 Supplying and embedding following dia G.t. pipe (medium class) in pole collar/ foundatlon (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia Metre 2 543 Rs. Five Hundred Fourty Three Only

30 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulatorand complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) Sft 6 1809 Rs. One Thousand Eight Hundred Nine Only

31 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. Each 1 6536 Rs. Six Thousand Five Hundred Thirty Six Only

32 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 9 2482 Rs. Two Thousand Four Hundred Eighty Two Only

33 8.17.1 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 300 mm sweep Each 3 2572 Rs. Two Thousand Five Hundred Seventy Two Only

Rs. Four Lakh Thirty Two Thousand Five Hundred Fourteen Only

Numbers of item 33 (Thirty Three)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA

(Fire fighting) Provisonally Rate Approved by SE

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. RATE IN WORDS Amount Rs. P.

II HAND APPLIANCES (INTERNAL)

1 Providing and fixing Stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever diccharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etrc. complete. (a) Capactity 6 kg. Each 4 6565 Rs. Six Thousand Five Hundred Sixty Five Only

2 Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS 13869 including fixing with dash fasteners etc, complete. Capacity 4.5 Kg Each 4 7878 Rs. Seven Thousand Eight Hundred Seventy Eight Only

Rs. Fifty Seven Thousand Seven Hundred Seventy Two Only

Numbers of item 02 (Two)

BILL OF QUANTITY THE CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA Model Estimate for Supplying Fixing & Installation Of Furniture & necessary Items, all Complete Job for Police Station Building

Furniture ANNEXURE - I

ESTIMATED AMOUNT : Rs.

SlNO CODENO DESCRIPTION UNIT QUANTITY RATE IN FIG. Rs. P. RATE IN WORDS AMOUNT Rs. P.

3 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 1 25446.3

4 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 3 7087.3 Rs. Seven Thousand Eighty Seven And Thirty Paise Only

5 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate. Each 2 4004 Rs. Four Thousand Four Only

6 ALMIRAH Storage of Size- 1980mm ( H ) x 900mm ( W ) x 500mm ( D ) - Type of Almirah Steel- Almirah steel welded with shelving cabinet. Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L and BIS Certficate.. Each 1 33458.7 Rs. Thirty Three Thousand Four Hundred Fifty Eight And Seventy Paise Only

7 RECEPTION TABLE Reception Table of size 5' Liner of size 1500 mm (W) x 870 mm (D) x 1080 mm (H) -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA ( IS: 513 ), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8 mm CRCA ( IS-513 ) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA ( IS-513 ) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA ( IS-513 ) is provided for bag hanging. The product should be Greenguard UL certified. .Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Green Guard by U/L .. Each 1 70297.7 Rs. Seventy Thousand Two Hundred Ninety Seven And Seventy Paise Only

8 RECEPTION CHAIR Mid Back Chair - Size- 700 mm ( W ) x 1055 mm ( H ) x 700 mm ( D). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height- 538 mm. Warranty- 3 Years. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level 2, Indoor Advantage Gold Certificate, Each 1 11017.6 Rs. Eleven Thousand Seventeen And Sixty Paise Only

13 METAL SINGLE BED METAL BED with 78x36x4 mattress - Structure of Metal bed frame including legs and head Structure-MS Hollow Rectangular / Square Section.Size of Rectangular Hollow section - 50 mm X 25 mm. Size of Square Hollow Section - 38 mm X 38 mm Size of Circular Hollow Sections - N.A.Thickness of Hollow Section in Structure-1.2 mm. Support Panel for placement of mattresses- MS hollow box Square Section.Thickness of support Panel -1.0 mm. Over all length of Bed - 2000 mm. Height of Bed in mm - 650 mm. Paint /Finish of MS Parts-Powder Coating. Min Powder/paint coating thickness ( Micron) - 60 micron. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, IGBC Platinum, BIFMA Level Certificate, Indoor Advantage Gold Certificate, Each 2 23751.2 Rs. Twenty Three Thousand Seven Hundred Fifty One And Twenty Paise Only

17 Dustbin 13 Litre Stainless Steel Grade-304, Capacity-13 Litre pedal operated Each 1 3554.1 Rs. Three Thousand Five Hundred Fifty Four And Ten Paise Only

20 RO Water Purifier 50 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 1 44579.7 Rs. Fourty Four Thousand Five Hundred Seventy Nine And Seventy Paise Only

22 TV 32' Fully Smart TV voice assistant, LED full HD Design, slim, glossy black design with thin bezels (VNB), suitable for compact spaces. Each 1 25534.3 Rs. Twenty Five Thousand Five Hundred Thirty Four And Thirty Paise Only

Grand Total Including GST

Rs. Two Lakh Ninety Thousand Six Hundred Sixty One Only

*** Note:-Dimension variable upto ± 30 mm is acceptable.

G E N E R A L A B S T R A C T

NAME OF WORK : CONSTRUCTION OF VISITOR COMPLEX AT MANDAL JAIL, PHULWARI SHARIF IN THE DISTRICT OF PATNA WITH ELECTRIFICATION Job No. GROUP- 01 OF e-N.I.T. No. 08/2026-27

Date of Tender :-

Estimated Cost in Rs. :-

Earnest Money in Rs. :-

Time of Completion :- Months

Cost of BOQ :- 10000

Bid processing fee through online mode:- As per eproc 2.

SL. NO NAME OF WORK TOTAL Rs P

2 Sanitary Installation

4 Deep Tubewell

5 Fire Fighting

Add GST @ 5.36%

6 Electrification Work

Enclosure-B.O.Q's ORDER

(1) B.O.Q. amounting to Rs.

Rs. Fifty Three Lakh Twenty Nine Thousand Nine Hundred Eighteen Only

detailed as above for Scheduled items, is herewith approved.

Junior Engineer Asstt. Engineer Executive Engineer Superintending Engineer, Work Circle-01