Loading
Loading…
Loading…
Tender Value
₹26.7 L
EMD Value
₹53,377
Closing Date
10 Jun 2026, 11:00 am4d left
Executive Engineer (E)
Executive Engineer (E),PWD NES/M-251, LM Bund Road, Ramesh Park, Delhi
Sub head Miscellaneous Electrical work at Jhilmil underpass jurisdiction of sub division -3/M2533, Shahdara, Delhi
2026_PWD_292600_1
29/EE(E)/PWD NES ED/2026-27
Open Tender
Electrical Works
30 days
DA Staff Qtr. -2533
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹53,377
Yes
3 Jun 2026
3 Jun 2026
10 Jun 2026
3 Jun 2026
10 Jun 2026
3 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1S.I.T.C of following manually operated Oil immersed Star-Delta motor Starter with double contact heavy duty and cable entry box, oil tank capacity 10 Ltr. to 12 Ltr. with filled oil complete with SS enclosure and operation handle complete etc. as reqd. i/c credit of old starter. | |||||
| 1.1 | 60 HP | - | Each | - | - |
| 2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Pro1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) | |||||
| 3Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 3.1 | Hot finished welded type tubes | - | Kg | - | - |
| 4Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required | |||||
| 4.1 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | Kg | 1 | - |
| 5Providing, supplying, and fixing factory-made insulated PUF (Polyurethane Foam) Sandwich Panels consist of pre-painted galvanized iron (PPGI) sheet on both sides with injected high-density rigid polyurethane foam insulation in between, complete with tongue and groove interlocking arrangement, suitable fasteners, sealant, accessories, and supporting arrangements etc. as required at site. Outer/Inner PPGI sheet thickness: 0.45–0.50 mm,PUF insulation density: 40 ± 2 kg/m³, Panel thickness: 40/50/60 mm as per requirement, Fire-retardant grade insulation, Weatherproof and corrosion-resistant finish | |||||
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | Sq.Mtr | 1 | - |
| 7Fabrication, Supplying and installation of outdoor type cubical feeder pillar of size 1800mm x 1800mm x 600mm of M.S. sheet 2mm thick (14 SWG) duly compartmentalised having double door with two nos. godown locking arrangement for protection from rain, dust, duly fixed on M.S. angle iron frame work of size 40 mm X 40 mm X 6 mm (NS) 900 mm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement 2 sand :4 stone aggregate 20 mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminum thimbles, earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as reqd. Supplying & Fixing of following accessories in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. Incoming:- a) 630Amp. 36 KA MCCB, FP with neutral link- 1 No. b)Spreder Link for MCCB -1set c) Extended Rotary handle for MCCB - 1 Nos. d) 630 Amp onload changeover e) 800 Amp Aluminium Bus bar Metering:- a) R. Y. B indication Lamp b) ASS + VSS Selector Switch c) 6A SP MCB 10KA For Controlling d) CT 630/5A Class-1 e) Digital single phase Ammeter f) Digital single phase Voltmeter ....................Cont.................... | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.24 MB
BOQ_388668.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid