GE(S)/M-49/2020-21

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing from site all as specified and directed.

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Excavating over area in any type of soil, n. exc. 1.5 m deep and getting out complete all as specified and directed.

Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

Returning, filling in, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping, bedding, haunching against the side of wall of manholes and kerbs of interlocking tiles, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) set in CM 1:6 as in cover slabs (for manholes etc) with plain fair faces complete all as specified and directed.

Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

Brick work with fly ash bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in built in CM (1:4) complete all as specified and directed.

M&L for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate in plinth protection. Concrete shall be laid in alternate bays n.exc 3 m in length finished fair and even including provision of joints of 6 mm wide and 10 mm deep along the wall and bays filled with bitumen mastic (1:3) complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 20mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver block, white cement layer coated with epoxy coating (Red/Yellow), built with grey cement and pigment of any shape and size, confirming to IS 15658-2006 (M-40 Grade) over and including 50mm thick sand filling under paver, properly levelled etc, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:3) on stone masonry surfaces or concrete surfaces (internal) mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement, finished even and smooth without using extra cement, complete all as specified and directed. NOTE:- Liquid water proofing compound shall be measured and paid for separately as “Supply only”

M&L for 15mm thick rendering in CM 1:4 on brick work or concrete surfaces (External), finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10 mm thick rendering in CM 1:6) on brick work or concrete surfaces mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement, finished even and smooth without using extra cement, complete all as specified and directed. NOTE : Liquid water proofing compound shall be measured and paid for separately as “Supply only”

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces of ceiling including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement complete all as specified and directed. NOTE : Liquid water proofing compound shall be measured and paid for separately as “Supply only”

M&L Flush pointing to squared rubble masonry, coursed or uncoursed brought upto courses in CM 1:4 complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, over and including a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for form work to soffits of flat, rough finished surfaces of concrete of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick(Horizontal or sloping) complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10 cm but n. exc. 20 cm wide, rough finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars 6 mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung or sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specifiedcomplete all as specified and directed.

S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer after preparation, complete all as specified and directed.

S&F 3.0mm thick figured sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F galvanized steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm Wenga/Teak colour PVC sheet reinforced with MS Square tube, fixed in opening as per drawing complete all as specified and directed.

S&F 30mm thick Factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specifications & drawing complete all as specified and directed.

S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F 15mm bore stop/angle valve, cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F 20mm bore stop valve, cast copper alloy (ISI Marked), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.

S&F Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F LDPE waste pipe, 32mm dia suitable for WHB / Sink including threaded PVC socket suitable for shank of waste coupling, complete all as specified and directed.

S&F Vitreous china bowl urinal, flat back of size 465mm x 355mm x 265mm, white with grating and union for discharge pipe (excluding flush pipe and waste pipe) complete including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass (cutting in any shape) fixing with chromium plated brackets guard, complete all as specified.

S&F stainless steel grating doom 100mm dia, fixed in floor, complete all as specified and directed.

S&F stainless steel grating doom 100mm dia with waste hole, fixed in floor, complete all as specified and directed.

S&F chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe including 195mm long arm with 45 degree with flange of PTMT any colour complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Cutting 15/20mm existing steel tubing for alterations or additions (Each cut measured) in position without taking down, complete all as specified and directed.

S&F for 20mm bore gun metal, globe or gate valve with iron pipe, cast copper alloy, screwed down, high pressure, with wheel head/butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F cast iron floor trap 100mm size with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed.

S&F cast iron gully/nahani trap 100mm size with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed.

S&F 100mm bore Cl soil waste pipe (sand cast) in any length with ears fixed with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore Cl soil waste pipe (sand cast) in any length with ears, fixed with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 100mm bore Cl soil vent pipe (sand cast) in any length with ears fixed with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F Cl bends (any radius) for soil pipes 100mm bore diminishing pieces or tapers on walls with oval access doors, complete all as specified and directed.

S&F Cl bends (any radius) for soil pipes 100mm bore diminishing pieces or tapers on walls, complete all as specified and directed.

S&F Cl bends (any radius) for waste pipes 75mm bore diminishing pieces or tapers on walls, complete all as specified and directed.

S&F 100mm bore cast iron cowl complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm size with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F PVC (SWR) gully/nahani trap 125/110mm size with grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed.

S&F 110mm bore PVC (SWR) type 'B' pipes, single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipe, jointed with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) type 'B' pipes, single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipe, jointed with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend (any radius), for connecting or diversion of pipes fixed with solvent cement complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend (any radius), for connecting or diversion of pipes fixed with solvent cement complete all as specified and directed.

S&F 150mm bore PVC (SWR) type 'B' pipes, single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipes, jointed with solvent cement complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1 complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 1000 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1 complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete M-10 (Nominal mix) using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified & directed.

Supply and Laying 150mm bore salt glazed stone ware (SGSW) pipe, grade 'A', jointed, laid on concrete bed including necessary fitting including testing after laid, complete all as specified and directed.

M&L for point wiring for one light point / fan point / bell point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 1.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead drawn in and including connected non metallic rigid PVC conduit including CI/MS terminal box of required size including 3mm thick plastic laminated top sheet cover including cutting chases to walls and making good the disturbed surfaces to match with the existing specifications, complete all as specified and directed.

Description all as per Srl item No 92 here-in-above but one 3 pin 6 Amps socket outlet multipurpose on same board complete all as specified and directed.

Description all as per Srl item No 92 here-in-above but one 6 pin 16 Amps socket outlet independent with 2.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS cable and 2.5 Sqmm PVC insulated unsheathed copper conductor single core multistranded FRLS (green colour) cable as earth lead complete all as specified and directed.

S&F socket, 5 pin 6 amps, flush type, 230 volts AC with polycarbonate body all as specified and directed by Engineer-in-Charge.

S&F socket out let, 6 pin 6 & 16 amps multi purpose 2 in 1 flush type, 230 volts AC with polycarbonate body all as specified and directed by Engineer-in-Charge.

S&F Switch piano flush button, single pole, one way, 15 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F Switch piano flush button, single pole, one way, 5 Amps, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F ceiling rose, surface bakelite, 3 terminals, 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F MCB SPN 40Amps breaking capacity 10 KA 'B' series 240 Volts 50 Hz complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board, single pole & neutral, 240 Volts, 4 Way with IP-43 IK-09 protection, single door, complete with appropriate size bus bar neutral link earth bar and din rail single phase and including cutting chases to wall for fixing enclosure and making good the disturbed surface to match with existing specifications, complete all as required at site and directed by Engineer-in-Charge.

S&F MCB single pole, 230 Volts, 6 to 32 Amps with repturing capacity 10 KA 'C' Curve including providing thimble for outgoing cables, complete all as specified and directed.

S&F MCB single pole and neutral, 230 Volts, 6 to 32 Amps with repturing capacity 10 KA 'C' Curve including providing thimble for outgoing cables, complete all as specified and directed.

S&F water heater storage type, electric, capacity 25 litre, BEE 5 STAR rated including armoured PVC connection complete all as specified and directed.

S&F LED batten fitting 20 Watt (4 feet long) with in built LED tube rod complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or complete all as specified and directed.

S&F LED batten fitting 10 Watt (2 feet long) with in built LED tube rod complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or complete all as specified and directed.

S&F bulk head 10 Watt LED light fitting IP-43 in engineering plastic housing with clear primatic diffuser complete with all acessories, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm as required, complete all as specified and directed.

S&F Heavy duty exhaust fan of metal body and blades of approved make and cat part, single phase, 230 Volts, 50 Hz, 1400 RPM, 300mm sweep, etc complete with lauvers including connecting exhaust fan with sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete all as specified and directed.

Supply and lay in trenches/on wall/on pole/in duct /through protection pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables heavy duty LT cable, 1100 volts grade with aluminium conductor cross sectional area 10 Sqmm 2 core size complete all as specified and directed. Note:- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer complete all as specified and directed. Note :- Punned thickness shall only be measured and paid.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick complete all as specified and directed.

M&L for 50mm bore galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings such as MS clamps of size 25mm x 4mm, nuts, bolts, washers etc, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

M/s Rajeev Vashist

abrol enterprises

VIJAY KUMAR LAKHNI

Ms Dalip Kumar and Co.

jagdish sons