REPAIRS/MAINTENANCE AND REPLACEMENT OF LT VOLTAGE STABILISER, LT UG CABLES, LT PANELS AND ALLIED WORKS AT PEDONG, ALGARAH, DALAPCHAND, AP ALGARAH AND TEESTA TCP UNDER GE 867 EWS

Amount

Laying only in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core and connecting with necessary lugs including taking out exising unserviceable cable complete all as specified and directed by Engineer-in-Charge.

Laying only in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core and connecting with necessary lugs including taking out exising unserviceable cable complete all as specified and directed by Engineer-in-Charge.

Laying only in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core and connecting with necessary lugs including taking out exising unserviceable cable complete all as specified and directed by Engineer-in-Charge.

Laying only in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core and connecting with necessary lugs including taking out exising unserviceable cable complete all as specified and directed by Engineer-in-Charge. Note for Item No. 1 to 4: Cable shall be issued under sch 'B' free for laying. Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately.

Supply and laying in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sqmm 3.5 core and connecting with necessary lugs including taking out exising unserviceable cable complete all as specified and directed by Engineer-in-Charge. Note:- Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately. Make of cable shall be CCI / Gloster / ICC / Unistar / NICCO / Asian (RPG) / Havells / Polycab/PRG/Universal/Plaza/Crystal cables/Terracom/ Rallison/Mescab/Jeypore/KEI

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5 in depth for taking out /laying of cable etc., and getting out in soft/loose soil.complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soil, including spreading leveling, watering and wall ramming in laying not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance n.exe 50m and depositing where directed at alevel n.exe 1.5m above the starting point complete all as directed by Engineer - in -Charge.

Supply and spreading of dry sand in trenches for cable coushioning and punned down complete all as specified and directed by Engineer-in-Charge. Note:- Punned thickness only shall be measured for payment purpose.

M&L for common burnt bricks, sub class 'B', of size 230 x 115 x 75 mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.

Material and labour for 80 mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection including taking down/out existing pipe complete all as specified and directed by Egineer-in-Charge.

Material and labour for 40 mm dia bore GI tubing Light grade, laid under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection including taking down/out existing pipe complete all as specified and directed by Egineer-in-Charge. Make for iItem No. 11&12: TATA/ZENITH/JINDAL

Material and labour for taking down/out existing 80 mm dia bore GI tubing Light grade, and relaying in same location or new location under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection complete all as specified and directed by Egineer-in-Charge.

Material and labour for taking down/out existing 40 mm dia bore GI tubing Light grade, and relaying in same location or new location under roads/ floor, or fixed to wall or along the pole with suitable size M.S.flat iron clamps, nuts, bolts and washers for cable protection complete all as specified and directed by Egineer-in-Charge.

S&F of MCCB of Four Pole, 415V, AC 50 Hz, 36KA breaking capacity 200 Amps with overload and thermal release range 70 to 100% and magnetic setting adjustable features including taking down old unserviceable MCCB complete all as specified and directed by Engineer-in-Charge.

S&F of MCCB of Four Pole, 415V, AC 50 Hz, 36KA breaking capacity 160 Amps with overload and thermal release range 70 to 100% and magnetic setting adjustable features including taking down old unserviceable MCCB complete all as specified and directed by Engineer-in-Charge.

S&F of MCCB of Four Pole, 415V, AC 50 Hz, 36KA breaking capacity 125 Amps with overload and thermal release range 70 to 100% and magnetic setting adjustable features including taking down old unserviceable MCCB complete all as specified and directed by Engineer-in-Charge.

S&F of MCCB of Four Pole, 415V, AC 50 Hz, 25KA breaking capacity 100 Amps with overload and thermal release range 70 to 100% and magnetic setting adjustable features including taking down old unserviceable MCCB complete all as specified and directed by Engineer-in-Charge. Make for Item No. 15 to 18: LEGRAND/SIEMENS/SCHNEIDER/L&T

Earhing complete with galvanized steel earth plate electrode 600X600X6.3mm buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to GI earth strip of size 32x6mm, by means of galvanized iron or steel bolts, nuts, check nuts and washers, and conneced to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh charcoal or coke and common salt in alternate layers, of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia reinforced bar 15 cm C/C and suitable handle of 10 mm dia round bar, 40 mm GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I including taking out existing earth plate etc., complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m.

Cutting and trimming tree branches any girth and any size and any number, touching to over head line and clearing the distance 2.5 mtrs both side of LT/HT over head conductors of span not exceeding 60m between poles and removing cut branches to a distance not exceeding 50m complete all as specified and directed by Engineer-in-Charge. Note:

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE.

M&L for rendering 10 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and directed by Engr-in-charge.

M&L for Plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M&L for dismantling of old unserviceable servo voltage stabilizer of capacity 75 KVA, 415 volts AC supply, including lifting up complete voltage stabilizer from housing with suitable tools, inspection/ repair/replacement of worn off parts as directed by manufactures after disconnecting all power supply and commiosioning, testing after repar/ replacement voltage stabilizer including prepration of surface for painting and applying one coat of synthetic enamel paint and writing MES & SM No with black paint (letter size should not be less than 50mm ) complete all as specified and directed by Engr-in-Charge. Note: Spares/ accessoried reuired for replacement shall be measured and paid separately under respective items as supply only.

Supply only Push button Switch suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Auto manual Switch suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only DPDT Switch suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Micro Switch suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Panel lamp suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Potentiometer suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Digital Volt meter suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Digital Ammeter with CT suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Electronic circuit card (PCB) suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Micro processor based controll card for each phase suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only PCB holder suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only trigger transformer suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only Rotary Switch 5 amp for RYB phases suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only servo motor 10 Kg torque suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only RC net work for 10 KG motor suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only carbon brush suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply only dimmer state unit 75 KVA, 40 amp 415 volts, AC supply suitable for 75 KVA servo voltage stabilizer complete all as specified and directed by Engineer-in-Charge.

Supply & filling of transformer oil intransformer at site for toping up the level of oil having dielectric strength 40-60 KV during filling after initial filtration conforming to IS-335 complete all as specified and directed by Engineer-in-Charge. (Transformer oil shall be supplied in sealed container and empty barrel of transformer oil shall be deposited in E/M store yard) Make: POWER/ INSOLE/ UNIVERSAL

Supply & Fixing LED street Light in aluminum PDC housing toughened glass cover with IP 66 protection of 80 Watt to existing system by providing suitable length of three core 2.5 sqmm PVC insulated copper conductor cable including taking down old unserviceable street light fittings of any type, complete all as specified and directed by Engineer-in-Charge. Make: SURYA cat part No. SLE UL 80W IP66 LXN or equivalent make of Philips /CG approved by GE.

M&L for applying one coat aluminium paint on 9/11 mtr long steel tubler pole in position after prepretion of surface of steel tubler pole including all fitted cross arms, clamps and nut, bolts etc., including painting of black and yellow paint strips of 05 Nos of 30 cm wide strips or as ordered by engineer-in-charge on poles up to 1.5 mtr high above coping level including numbering of size 70mmx40mm by using stencil to the pole with black synthetic enamel paint ( 1st grade ) 1.5 mtr above the ground level all as specified and as directed by Engineer-in-Charge.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 47,450.00 B/F from Ser page No. 27 NOTE: Bidder shall insert credit amount as rate Rs. 47,450.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

M/S G. K. SUTHAR

MS MAYA PRAKASH GOEL AND SONS

DEEP CHANDRA JOSHI

GEETA CONSTRUCTION

GARGO TRADERS

SANJAY MITTAL