Electrical work in c/w Upgradation and Provision of RDSO-based VSS (Video Surveillance System) at SVDK Station under Jammu Division

Description:- Supply and Erection of modular metal boxes concealed boards with white finish

(Myrius), Schneider (Zencelo), Anchor (Ave) or similar. Metal boxes boards are to be concealed in the wall for 8 Module

Description:- Supply and Erection of modular metal boxes concealed boards with white finish

(Myrius), Schneider (Zencelo), Anchor (Ave) or similar. Metal boxes boards are to be concealed in the wall for 4 Module

tech. specification IS/IE rules and site requirment.

tech. specification IS/IE rules and site requirment.

Amps as per tech. specification IS/IE rules and site requirment.

as per tech. specification IS/IE rules and site requirment.

7 JAMMU DIVISION-ELECTRICAL/NORTHERN RLY 7 Description:- Supply, fixing, testing and commissioning of LED tube light system wattage 18 Watt to 20 Watt complete with all mounting arrangement & accessories & flexible copper wire for connection from ceiling rose as per ISS/IR rules & site requirement as per CEE/N.Rly. Specification No.CEE/NR/121-Elect/PS/2018 (Rev '3') Dated 28.06.2018. & CEE/NR/121-Elect/PS/2019(Rev-04) dt 04.11.2019 with correction dt.10.02.2020 or latest.

multistranded copper conductor s/core cable1100 Volt conforming to IS-694 (latest version), make Finolex, Havells, Polycab, KEI in the recessed PVC conduit pipe 25 mm dia as required at site.

copper conductor cable 1100 Volt 1x1.5 Sq.mm multi stranded confirming to IS-694 latest in the existing PVC pipe.

Description:- Supply, laying, fixing, testing and commissioning of 2.5sq mm FRLS, PVC insulated

version),make Finolex, Havells, Polycab, KEI or equivalent in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as per Tech Spec-I attached, IS & IE rules.

Description:- Supply, laying, fixing, testing and commissioning of 4 sq mm FRLS, PVC insulated

version),make Finolex, Havells, Polycab, KEI or equivalent in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as per Tech Spec-I attached, IS & IE rules.

9537/Pt. III/1983 or Latest Version with accessories, junction box, etc including making chase, plastering/clamping etc as per technical specifications.

Description:- Supply, fixing, installation, testing and commissioning of energy efficient 230V,50 Hz

speed-120 to 260 V AC with 5 step speed control electronic regulator, copper winding complete as per IS : 374-1979 or latest IE rule & site requirement. Make Bajaj, Usha, Havells, Crompton, Orient or equivalent.

propeller type exhaust fan complete as per IS, IE rule & site requirement. Make Usha, Orient, Bajaj or equivalent

existing MS/PVC conduit junction boxes/casing caping Anchor, Cona, Kinjal, SSK or equivalent as per IS, IE rules and site requirement.

MCBs in the meter box as indicated above. MCBs should be of M/S Legrand, GE, L&T, ABB, Schneider, Siemens or similar make.

Description:- Design, manufacturing of floor mounted MS feeder post made of MS sheet 16 SWG

having cable glands 2 Nos. duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals.

Description:- Supply, erection, testing and commissioning of the following Double door wall

comprising; (i) Incoming MCCB 4Pole 63 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (4 Nos. On each Phase) - 12 Nos.

Description:- Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured,

cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Above 25 sq.mm

20 JAMMU DIVISION-ELECTRICAL/NORTHERN RLY 20 Description:- Design, Manufacturing, supplying, fixing and commissioning of Meter Box / MCB Box made of MS sheet 16 SWG die pressed as per drawing/Specifications.

Description:- Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch

Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover as approved by Rly . Representative, cover with locking arrangement shall be provided.

mentioned in explanatory note.

23 Description:- Supply and laying of threaded PVC 3/8 inch dia as per site requirement.

per site requirement.

box & suitable for AC & as per explanatory note

Description:- Supply, installation and commissioning of light weight wall mounted voltage stabilizer confirming to IS: 8448 suitable with toroidal care transformer having capacity 4 KVA, Input Voltage

type instant and start switch, under voltage and over voltage cut off with indicators, Digital Voltmeter and Ammeter with soft type selector switch for measuring input & output voltage, indicator for power ON and timer ON. IS 8448 Latest version/Make Microtek, V-Guard or equivalent with RDSO/ISO/BIS/equivalent certification

involves laying of cable in HDPE pipe as per specification."

Description:- Digging and filling of trench size 0.4 x 0.8 meter (trench work may be on

surface on trench shall be made good in all respect and satisfaction of site engineer as per specification.

Description:- Supply, Erection, Fixing, Testing and commissiong of LT panel having incoming 1x

and 1x63 Amp MCCB 35 kA FP with Amp meter, volt meter and indicator. Make of MCCB &MCB M/s Legrand, Havells, Schenider

Description:- Supply, installation and commissioning of Pure Sine wave 7.5 KVA online UPS, IGBT

conforming to RDSO/PE/SPEC/PS/0023-2001( Rev. 0) Amendment no.3 dt 16.9.2011. or latest. MINIMUM WARRANTEE OF 02 YEARS FOR BATTERY & INVERTER. Square

Foot Description:- Design, Manufacture, supply, fixing, testing and commissioning of single sided LED

(Rev'3') Dated 28.06.2018 or latest. and as per site requirement. Note:- Static/single sided board of different sizes name is required. prior approval of message color and size to be taken from competent authority.