Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹21.2 L+₹91,342.50 (4.49%)Rejected-Finance ROWRIAH KB ROAD PO CHALIHA JORHAT 785004 ASSAM | JORHAT | JORHAT | ASSAM | 785004 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹21.6 L+₹1.3 L (6.39%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹22.5 L+₹2.1 L (10.5%)Rejected-Finance | L4 | Rejected-Finance Being not lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
30 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GARRISON ENGINEER JORHAT, MES, JORHAT-785005
WELCOME MAINTENANCE TO CERTAIN MD OFFICER ACCN AND PETTY REPAIRS DAY TO DAY MAINTENANCE AT MARIANI UNDER GE JORHAT
2023_MES_608006_2
8131/E8
Open Tender
Civil Works
Works
270 days
JORHAT
Please refer tender documents and NIT
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER Jorhat
₹40,000
Yes
10 Nov 2023
7 Sept 2023
2 Oct 2023
7 Sept 2023
30 Sept 2023
15 Sept 2023
Amount
NOTES :The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.
Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles.
Material & Labour for Brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 metre mean radius built in cement mortar 1:4.etc complete all as specifed and as directed.
Material & Labour for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4.etc complete all as specifed and as directed.
Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specifed and as directed.
Material & Labour for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 mixed with WPC as per manufacturer's instructions and finished even and smooth without using extra cement etc complete all as specifed and as directed. Note : WPC shalll be measured and paid for separately.
Material & Labour for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement etc complete all as specifed and as directed.
Material & Labour for 5 mm thick rendering on fair faces of concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement etc complete all as specifed and as directed..
Supply only integral water proofing compound complete all as specified.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) etc complete all as specifed and as directed.
Material & Labour for 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement etc complete all as specifed and as directed.
Supply only glass dividing strips 38 mm wide and 3mm thick etc complete all as specifed and as directed.
Material & Labour for M-15 ( Nominal mix concrete ) using 12.5 mm graded crushed stone aggregates as in cills, steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneelers, apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles and throating as directed .
Material & Labour for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth without using extra cement complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles from site and rubbish off the premises etc complete all as specifed and as directed.
Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.
Material & Labour Non skid ceramic tiles(digital type), coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.18Sqm and not exceeding 0.36Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.
Material & Labour Non skid ceramic tiles(digital type), coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.18Sqm and not exceeding 0.36Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.
Material & Labour Glazed ceramic tiles 450x300/ 300x200 x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.
Material & Labour for Pre-Polished Chequered designer concrete tiles of approved colour in white and gray cement (top 10mm of white cement delomite grit and approved colour ) with two coats of laquer finish on top of tiles, thickness of tiles 25mm of any size and shape including corners angle etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles. Tiles shall be manufactured by using rubber mouil on vibrating table not hydrauliclly pressed, complete all as specified and directed.
Material & Labour for 25 mm thick plain cement concrete 1:2:4 type B-0 ( using 12.50 mm graded stone aggregate) as in sub bases of floors finished even and fair etc complete all as specifed and as directed.
Dismantling of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specifed and as directed.
Material & Labour for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specifed and as directed.
Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional. Note : Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid.
Dismantling of steel windows any description and fixed in any position including grill etc complete all as specified and directed .
Material & Labour for Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovatailed or welded etc complete all as specifed and as directed.
Material & Labour for Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars dovatailed or welded etc complete all as specifed and as directed.
Material & Labour for Steel ventilators with top hung shutters including hinges, steel peg stay complete etc complete all as specifed and as directed.
Cutting the broken projecting type hinges of existing steel windows from metal frame and welding the new projecting type hinges and refixing the existing old shuters after necessary repairs etc complete all as directed.
Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, etc to make door or window fully functional complete all as directed by Engr-in- Charge.
Supply and fixing of in repairs 18/19 mm thick block boards, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board etc complete all as specifed and as directed.
Supply and fixing of in repair 18/19 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work.
All as per description of Ser item No. 31 above but fixed in pelmet boxes or in narrow widths not exc 15 cm Each rebated or flat edged etc complete all as specifed and as directed.
Supply and fixing of in repairs Ply wood grade BWR type BB, 12 mm thick fixed to timber frame work with nails etc complete all as specified.
Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm Each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specifed and as directed.
Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm Each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specifed and as directed..
Taking down Shutters of any description exc 1.0 Sqm and n.exc 2 Sqm Each complete all as specifed and as directed..
Supply and fixing of Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per specification and drawings.
Supply and fixing of factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for topo rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.
Supply and fixing of pressed steel frames, size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and as directed.
Supply and fixing of pressed steel frames, size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and as directed.
Supply and fixing of plain, solid, 2nd class hard wood straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with pinned at joint etc complete as specified and as directed.
Supply and fixing of 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically presssure treated etc complete as specified and as directed.
Supply and fixing of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I and fitted to chowkats etc complete as specified and as directed.
Supply and fixing of MS flat iron as in hold fast etc, wall ties, hooks for hanging fans and similar small articles conforming to Fe-290-0 Gde-E-165 etc complete as specified and as directed.
Supply and fixing of 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed etc complete as specified and as directed.
Supply and fixing of 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete as specified and as directed..
Supply and fixing of 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete as specified and as directed.
Supply and fixing of 150 mm long aluminium handles, cast type, anodised and fixed.etc complete as specified and as directed.
Supply and fixing of 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed etc complete as specified and as directed.
Supply and fixing of floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor etc complete as specified and as directed.
Supply and fixing of in repairs continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open.etc complete as specified and as directed.
Supply and fixing of in repairs 40 mm dia cup board knobs, brass polished, fixed with nut, screws and washer of mild steel etc complete as specified and as directed.
Supply and fixing of in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, size 140 mm etc complete as specified and as directed.
Supply and fixing of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete as specified and as directed.
Supply and fixing of in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples etc complete as specified and as directed.
Supply and fixing of in repairs PVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gutties etc complete as specified and as directed.
Supply and fixing of in repairs MS helical door spring 150mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete as specified and as directed.
Supply and fixing of in repairs 100 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws etc complete as specified and as directed.
Supply and fixing of in repairs 125 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws etc complete as specified and as directed.
Supply and fixing of in repairs 150 mm long aluminium anodised hasp and staple with mild steel hinge pin including bolts to hinge plate and fixed with screws etc complete as specified and as directed.
Supply and fixing of in repairs aluminium alloy sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy etc complete as specified and as directed.
Supply and fixing of in repairs 150 mm aluminium handles, cast type, anodised etc complete as specified and as directed.
Supply and fixing of in repairs 125 mm aluminium handles, cast type, anodised etc complete as specified and as directed.
Supply and fixing of in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section etc complete as specified and as directed.
Supply and fixing of in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section.etc complete as specified and as directed.
Supply and fixing of in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges etc complete as specified and as directed.
Supply and fixing of in repairs mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel/angle iron frames by welding etc complete as specified and as directed.
Supply and fixing of in repairs mild steel cold rolled butt hinges medium weight 50 mm long fixed to pressed steel/angle iron frames by welding etc complete as specified and as directed.
Supply and fixing of in repairs mild steel, chromium plated curtain rod 20mm dia with holder/bracket, stops, rollers etc complete as specified and as directed.
Supply and fixing in repairs door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 Kgs and fixed etc complete as specified and as directed.
Supply and fixing in of 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in Each pane etc complete as specified and as directed.
Supply and fixing in of 4.00 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in Each pane etc complete as specified and as directed.
Supply and fixing of Aluminum door seal with PVC bush of adjustable type(Overall width 25mm) of approved Quality, fixed to door shtter,complete all as specified.
Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof. Note : Any item required to be replaced shall be paid under respective item and in that case this above item shall not be measured and paid.
Supply and fixing in repair of chromium plated pillar cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no 272210120011(DHAARA) of Somany or equivalent model of make list as given in PS as approved by GE.
Supply and fixing in repair of bib cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no 272210120031(DHAARA) of Somany or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of in repair stainless steel grating 100mm square/round with or without hole etc complete as specified and as directed..
Supply and fixing of in repair stainless steel grating 75 mm square/round with or without hole etc complete as specified and as directed.
Supply and fixing of in repairs stainless steel sink with drainage board made of stainless steel 1.00 mm thick with rawl plug washers and waste pipe including bedding in cement mortar to dwaef wall or including fixing M S cantilever brackets of size 25mmx25mm x4mm thick and connecting union to pipe, overall size of 915 mmx460mm bowl size 410mx330mmx160mm.etc complete as specified and as directed.
Supply and fixing of in repairs stainless steel sink with drainage board made of stainless steel 1.00 mm thick with rawl plug washers and waste pipe including bedding in cement mortar to dwaef wall or including fixing M S cantilever brackets of size 25mmx25mm x4mm thick and connecting union to pipe, overall size 1145mm x 510 mm and bowl size 555mmx440mmx200mm..etc complete as specified and as directed.
Supply and fixing of in repairs stainless plate racks of size 750mmx750mm x250mm fixed to wall with rowl plugs including PVC quttions and suitable size of screw or fasterners to fix on kitchen wall including taking down of old damaged plate rack of any pattern,complete all as specified and as directed by engineer-in-charge.
Supply and fixing in repair of Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore dia iron pipe and fixed .(Minimum weight 15mm-90gms) complete all as specified.
Supply and fixing of in repairs Chromium palted fancy type Certer hole mixer of standard quality for mixing hot & cold water as approved by Engr-in-Charge with fitting etc Complete all as specified and directed.
Supply and fixing of in repairs stainless steel CP toilet paper holder fixed with wooden gutties and screws to wall surfaces.etc complete all as specifed and as directed.
Supply and fixing of in repairs stainless steel soap tray CP fixed with wooden gutties and screws to wall surfaces etc complete all as specifed and as directed.
Supply and fixing of flush pipe of PVC 32 mm dia for low level cistern pipes.etc complete all as specifed and as directed.
Supply and fixing of in repairs Health faucet with 8mm dia ,1 mtr long flexible tube with wall hook complete all as specified.
Supply and fixing of jets of EWC's with required sizeof jet pipe (flexible) and connections etc complete all as specified.
Supply and fixing of in repairs 32mm bore dia of CP brass waste coupling suitable for WHB complete all as specified.
Supply and fixing of in repairs 40 mm bore dia of CP brass waste coupling suitable for Kitchen sink complete all as specified.
Supply and fixing of in repairs syphon kit assembly for low level flushing cistern including flush handle, float valve etc etc complete all as specifed and as directed.
Supply and fixing of in repairs flushing handle suitable for PVC flushing cistern of 10 ltr capcity complete all as specified and as directed.
Supply and fixing of in repair water closet (Squat pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe).etc complete all as specifed and as directed.
Supply and fixing of in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe but fixed complete all as specified.
Supply and fixing of in repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts etc complete all as specifed and as directed..
Supply and fixing of in repairs vitreous china wash down water closet pan `P` or `S` trap (pedestal pattern) white including fixing bolts,including connection to drain pipe (or out going pipe) and to flushing pipe,anti syphonage pipe etc etc complete all as specifed and as directed.
Supply and fixing of in repairs plastic water closet seat cover ,white,closed pattern with flats bottom and cover and mild steel chromium plated or aluminium hinging device,of approved make and quality etc etc complete all as specifed and as directed.
Material & Labour for cast iron nahani trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 using 20 mm graded stone aggrgate etc complete all as specifed and as directed.
Cleaning of blocked floor/nahani trap and CI pipe up to 1st manhole and removing all silt ,residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceedind 50 mtr and sealing the sides of traps in bath/kitchen using Aqua TS of Aquashield water proofing or equivalent any damaged caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-charge.
Cleaning of blocked WC trap and CI pipe up to 1st manhole and removing all silt ,residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceedind 50 mtr any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-charge.
Material & Labour for preparation of new wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer etc complete all as specifed nd as directed.
Material and labour for Preparation of new plster wall surface and applying two coats of 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50 gms/litre of required colour shade and as per manufacturer’s specification over a coat of primer complete all as specified and directed.
Material & Labour for preparation of newly plastered surfaces of wall and applying three coats of white wash etc complete all as specifed and as directed.
Material & Labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash etc complete all as specifed and as directed.
Material and labour for preparation of new surfaces and and applying 2 coats of cement based paint over a coat of alkali based primer complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.
Material, labour and fixed of aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, including aluminium main/closs tee of size 35mm x 23mm x 1.5 mm aluminum section and aluminium angle of 25mm X 25mm X 1.4mm thick, sutiable type GI wire hanging arrangement with adjuster all as specified in clause no 10.38 in SSR part-I and including 4mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer complete all as specified and directed.
Material, labour and fixed of GI Frame work for seamless ceiling comprising of GI perimeter channel 0.55mmm thick with two unequal flanges of 20 and 30mm and web of 7 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended form soffit at approx 900mm centre to entre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and including 10mm thick plaster of paris ceiling (Gypsum anhydrous) as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any guage, thickness, in roofs covrings ,partitons .etc complete all as specifed and as directed.
Supply and fixing of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,/Ridge/Valley gutter etc fixed with self tapping screws as specified.
Material and labour for Rolled mild hollow steel sections steel of grade YSt 310 conform to IS 4923-1997 in roof trusses (framed), trussed, purlins, bracing and fastenings including distance pieces, cleats etc.
Material & Labour for Preparation of old decorated surfaces of walls, plastered or unplastered by brooming down or steel wire brushing, scrapping down smoke soots,moulds, moss and efflorescent salts, trading oil and greasy spots and applying one coats of white washing complete all as specified and as directed.
Material & Labour for Preparation of old decorated plastered or unplastered surfaces of ceilings by brooming down or steel wire brushing, scrapping down , smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots and applying one coat of white wash, complete all as specified and as directed by engineer in charge.
Material and labour for complete removal of existing finishing of internal wall surface of building/structure by mechanical appliance and applying two coats of 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50 gms/litre of required colour shade and as per manufacturer’s specification over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.
Material and labour for preparation of old internal wall surface of building/structure and preparation of old surfaces and applying one coats of acrylic washable distemper complete all as specified and directed.
Material & Labour for Preparation knotting/stopping of old painted wooden or wood based surfaces of any description exceeding 10 cms width or girth and applying one coats of synthetic enamel paint , complete all as specified and as directed.
Material & Labour for Preparation of old painted steel and iron surfaces of any description exceeding 10 cms width or girth and applying one coats of synthetic enamel paint, complete all as specified and as directed.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
M/S DHAR AND DHAR
M/S M R CONSTRUCTION & CO
M/S PAUL CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .