Construction of Internees Hostel(Boys) at KMC Warangal and Contruction of Internees Hosptel(Girls) at KMC Warangal subwork: Providing 1 No Lift to KMC Warangal (3rd call)

8 Passengers Lift Supply, transportation, installation, testing and commissioning of 8 passenger (544 Kgs) / Goods Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including Scaffolding, minor building works like chipping, Grouting and pocket cutting. comprehensive maintenance of lifts during the defect liability period. Note: Make, Model and GAD should be approved by the Head Office/ Engineer-in -Charge Makes: Schindler / OTIS / Mitsubishi or equivalent Make. Lift shop drawings and Make & model should be approved by Head Office electrical incharge. Specifications: a) Type : Machine room less b) Pit Depth : 1300 mm or as per NBC c) Minimum Floor to Floor Height (Required) : As per Standard d) Travel height : 3.6 to 4.0mtrs e) Head room Height : 4.5mtrs f) Lintel Height (Required) : 2240mm from finished floor level +/- 10% g) Number of persons : 8 P h) Rated Load : 544 Kgs 8 Persons Passenger Lift i) Number of Stops : 4 j) Number of Access sides : 1 k) Floor Designations : 0, 1, 2, 3, 4. l) Drive Sytem : Alternating current, Voltage Frequency Drive (ACVF). m) Type of Controller : Fully collective control - Simplex / Duplex as per the site condition. n) Speed of Travel : 1.0 m/s o) Car size : As per Standard p) Door width : 800/ 900/1000 mm or As per Standard q) Door Height : 2000 mm or as per standard r) Rated output motor : as per standard s) Car Design : Car walls finish in Stainless stell hairline finish LED spot in ceiling. t) Car Doors : stainless steel hairline finish. Granite Flooring finish in Black sea. Deco ceiling finish in stainless steel Hairline. Full Height mirror on rear car panel. u) Car Operating Panel : Mechanical push button.Door open/close and alarm buttons / Touch panel or equivalent, Visual call confirmation, Car position Indicator, Pre-announcing arrows for collective controls, 16 Segment display v) Landing Doors : Fully automatic landing doors with stainless steel hairline finish. Center Opening or Side Opening as per the site condition w) Well Size approxmately: 1850mm Wide x 1900mm Dep w) Special Features : 1.Closed loop control system 2.Self Diagnostic control 3.Overload detection 4.Automatic evacuation to nearest floor(ARD) 5.Light curtain on car entrance 6.Alarm Horn 7.Fire Switch 8.Handrail in stainless steel finish on rear wall 9.Auto Fan off 10.Auto light off 11.Intercom-3way Additional features as per IS : 15330 : 2020. 1. Lifts shall be conveniently located and appropriately guided from the entrance by signage (Internal of Symbol of Accessibility) and tactile guiding systems to the lift lobbies in all building typologies. 2. Accessible landings at lift entrance shall be provided on each eligible floors. 3. Lift shall be marked with international symbol of accessibility. 4. A sign indicating the number of the floor arrived shall be provided on each lift landing on the wall opposite the lift in big font with big colour contrast. 5. Internal car lighting should provide Iminimum level of illumination of 100 lux at floor level, uniformly distributed, avoiding spotlights. 6. The lift door should have a clear opening lof not less than 900 mm and contrasting in colour from the adjoining wall. 7. Call Button : The call button located outside the lift and it should have : a. A clear floor space of at least 900 mm x 1200 mm with no obstruction placed to prevent a wheelchair user from reaching the call button. b. Be installed at a height between 800 mm land 1000 mm. c. Call buttons in each floor can contain icons instead of digits in tactile and colour contrasted against the background. d. Buttons shall always provide a two channel feedback when pressed: visual and acoustic or visual and tactile. e. Colour of any face plate of landing push button shall be contrasted to its surroundings. f. For the benefit of wheelchair users, the minimum distance to the centre line of any of the buttons from any wall or door at right langles, shall be 500 mm. g. Active part of the button shall be identifiable visually and by touch / acoustic from the face plate or its surroundings. Additionally, braille markings may be provided apart from raided letters. 8. A clear floor space of at least 900 mm x 1200 mm with no obstruction placed to prevent a wheelchair user from reaching it. 9. Be placed at a height of between 900 mm to 1200 mm from the floor level. 10. The buttons with Braille/raised letters and in sharp contrast from the background to aid people with visual impairments. Touch sensitive buttons or keypads shall be lavoided. 11. The lift should have a voice announcement system along with a visual display to indicate the floor level, car status and also the information that the door of the elevator is open or closed for entrance or exit. 12. The announcement system should be clearly laudible i.e. the announcement should be 50 Db. 13. The lift car shall not start when the car is overloaded. The lift operation shall resume only upon removal of the overload. 14. The floor of the lift car should be slip |resistant and have similar frictional qualities to the floor of the lift landing to decrease the risk of stumbling. 15.The provision of a mirror ( Laminate safety glass) on the wall of the lift car opposite the lift door is a positive aid to navigation for wheelchair users.The mirror should not extend below 900 mm from the lift floor to avoid confusing people with visual impairments. 16. The other provision related to disable person friendly for lifts in conformity with Harmonised Guidelines & Standards for Universal Accessibility in India 2021 by MoHUA, Govt. of India and IS : 15330 : 2020. Others specifications: 1.Minor Builders Work 2.Landing Push Button In Landing Door Frames 3.3 Way Intercom / Press And Speak Phone 4.Battery Operated Emergency Light And Alarm Bell 5.Floor Annunciator With Music 6.Automatic Rescue Device 7.Vandal Proof S.S. Button With S.S. Cover 8.Push Button - Orange L E D Illumination 9.Call Register Signal And Vf Door Operator 10.Full Car Operating Panel 11.Dot Matrix Led D & P Indicators In Car & Landings -Orange Colour 12.False Ceiling In Car 13.Firemans Switch 14.Free Service For two Years 15.Infra Red Door Screen 16.Provision For Music 17.Overload Warning Indicator 18. Provision For EPABX 19.Scaffolding 20.SS Handrail 21.Pit Ladder

Supply and Fixing of ISI 25mm outer dia medium grade, with IS:9537 part 3 rigid PVC with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Makes : Sudhakar / Finolex / Modi / VIP/ Precision / Million / Goldmedal / GM/ DEC / Beljin.

Supply and Run of 3 of 2.5 sq.mm class-IIconductor (phase, neutral and earth) HFFR PVC insulated 1100V grade as per IS:694/2010, IS 17048 specifications for Copper cable of in existing pipe. Makes of Wire : Finolex / RR kabel / Havells /Polycab/Beljin / Finecab Gold / GM/ Gold Medal / Million / KEI / VGuard./ DEC / Bonton / Avocab /Fortune Arrt / Sudhakar / Nakoda /HPL / GLOSTER / Rajnigandha /Pawancab / South King.

Supply and Run of 3 of 4.0 sq mm (phase neutral and earth) HFFR PVC insulated 1100V grade as per IS:694/2010, IS 17048 specifications for Copper cable of in existing pipe for power points and AC Sockets inlcuding all labour charges etc., complete. Makes of Wire : Finolex / RR kabel / Havells /Polycab/Beljin / Finecab Gold / GM/ Gold Medal / Million / KEI / VGuard./ DEC / Bonton / Avocab /Fortune Arrt / Sudhakar / Nakoda /HPL / GLOSTER / Rajnigandha /Pawancab / South King.

Supply and fixing of (8+12) 4 Way TPN DB Horizontal with IP 43, Protection as per IS:13032 and suitable for 12 Nos 6-32A, 10KA S.P. MCBs out goings and for 1 No, 63A, 4 pole Incomer MCB with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for flush mounting etc.(For Power DBs) DB Makes : Legrand / Schneider / Siemens / LK / Hager / Havells Stadx / ABB /BCH. MCB Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK Exora / BCH / Havells Stadx

Supply of 16Sqmm, 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / KEI / RR kable.

Supply of 35Sqmm, 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / KEI / RR kable

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II).

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Supply and Run of 25mm x 3mm copper strip (Cuurrent Carrying Capacity 270A) including cost of all accessories and labour charges etc., complete. (0.663Kgs/1Mtr)

Supply and transportation of 10W LED Bulk head fitting with milky diffuser heat sink integrated with housing with all accessories etc complete with 5 years warranty warranty. LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON / BAJAJ / Keselec / Fortune Arrt / HALONIX / HAVELLS / HPL / SYSKA / SURYA / Arraystorm / GM / Goldmedal / Jaquar / Panasonic / Leksa / Orient LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs.

Supply installation testing and commissioning of 3 phase and neutral 415V free mounted indoor LT panel made out of No.16/14 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of 63A 4P 16 KA MCCB Switch. The panel shall have comprised of following switch gear . Including supply and fixing the same and painting with powder coating including internal connections cost and conveyance of all materials & labour charges. Makes : LK - D sine / Schneider-NSNSX/Legrand -DP X3/ Siemens-3V /Hager-h3 / -Winbreak / BCH / Havells/ Eaton.

Supply and fixing of following switches and sockets modular type on suitable size Modular deep box with cover frame including cost and coveyance of all material and all labour charges etc., complete with following configurations 1) 16A / 6A 2 Module Combi Socket Modular Socket with shutter - 1 No 2) 16A/20A 1 Way 1 Module Modular Switch. - 1 No 3) 10A 3/2 Pin 2 Module Modular Socket with shutter - 1 Nos. 4) 6 / 10A 1 Way 1 Module Modular Switch – 1 Nos. including cost and coveyance of all material and all labour charges etc., complete for Computer, LAB and OTs Use Makes of switches : Legrand Arteor / Schneider Zencelo / Honeywell Blenge Plus /Crabtree Murano / Logus Platina / Gold Medal GIFA / GM-Zenova/ LK -Englaze / Million M-Vee.

Laying of PVC armoured under ground cable up to 70 Sqmm fixing on chromium plated metallic base saddles on wall as per IS 1255 and as directed by the department including cost and conveyance of all materials and labour charges etc., complete.

Termination of UG cables for 3.5 core 35 sqmm XLPE insulated armoured cable with fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS 6121 and IP66 complete with brass checknut, outer sheath sealing gasket, with required lugs etc complete. Makes: SMI / Commet / Dowels.