ADDN ALTN OF COVERED BADMINTON COURT P 145 AT VRDE AHMEDNAGAR 06

Amount

Note:- The Unit Rates for all the BOQ items for the subject work shall be deemed to be included necessary Single/Duble Scaffolding, T&P, Labour movement Etc, up to height of 15.00 Mtr. No Extra claim on this account shall be entertained. Contractor should considered this provision while quoting his Unit Rates. B/R PORTION Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing) complete all as specified and directed.

Taking down doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete all as specified and directed.

Dismentling Wooden flooring of any size and at any position. The Unservisiable wooden scrap retrived from demolition shall be deposited to MES store Yard complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in plinth protection and paving n.exc. 15 cm thickness (below or above grorived und level) including disposal off rubbish to a distance not exc. 100 Mtrs complete all as specified and directed.

Dismantling of water tank exc 500 lliter & not exc 1000 liter complete all as specified and directed.

Taking up or down steel tubing 15/20 mm dia and connections, including cleaning for re-fixing complete all as specified and directed.

M & L hardcore of broken stone or boulders of guage exceeding 63 mm but not exceeding 100 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface complete all as specified and directed.

M & L 150 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M & L cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flooring/ Sub base complete all as specified and directed.

S&F BWF approved 6mm thickness PVC Synthetic mat flooring with parmanent Game Line marking , Welding Cord , Tape and Adhesive solution for installation over and including 7mm cushioning import grade rubber all as per manufacturer's Instruction and as directed. Make:- 1. ARQUS Sports Consultancy, Erandane , Pune - 411004. 2. S P Enterprises, shop no 008, Vajreshwari Apt, Manvelpada Road, Virar, MH - 401305 3. Bhatia Sports & Fitness 40/673, Shastri Nagar, Pimpri-Chinchwad, MH - 411017.

Supply only broken glass beads of size 60 to 80 mm (approx) fixed in plinth protection below concrete complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type B1 using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for double charged vitrified antiskid tiles in floors 600mm x 600mm 8 to 10 mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 bed (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. (The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily) complete all as specified and directed.

M&L for ceramic glazed floor tiles 7 to 8mm thick of conforming to IS : 15622 of approved make in all colours, shades (except burgundy, bottle green, black) of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

M&L for laying double charged Vitrified glazed tiles in floor of size 800mm x 800mm 8 to 10 mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. (The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily) complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and removal complete all as specified and directed.

M&L for structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and directed (Fe-410W, E 250).

M&L for painting two coats with synthetic enamel paint on new steel surface of approved brand and manufacture of required colour to give an even shade complete all as specified and directed.

M&L for painting with synthetic enamel paint two coats on old steel surface of approved brand and manufacture of required colour to give an even shade complete all as specified and directed.

S&F precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns, and protective guard film of 25 microns minimum to avoid scratches during transportation. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces including cutting to size and shape wherever required complete all as specified and directed.

S & F frame size 65mm x 100 mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with & including M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F SS pressed butt hinges size 125mm x 65mm x 2.12mm with necessary screws etc. complete all as specified and directed. (Copper oxidised as per IS 1378) complete all as specified and directed.

S&F ISI marked oxidised SS sliding door bolts Size 300 x 16mm with nuts and screws etc complete all as specified and directed. (Copper oxidised as per IS 1378) complete all as specified and directed.

S&F ISI marked oxidised SS sliding door bolts Size 250 x 16mm with nuts and screws etc complete all as specified and directed. (Copper oxidised as per IS 1378) complete all as specified and directed.

S&F aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) Size 150mm x 10mm transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

M&F for powder coated aluminium (Coating 50 micron) work for windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash through fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, including glazing with 4.0/5.5 thick sheet glass & paneling as suitable complete all as specified and directed.

Taking down wash basins vitreous china in any description including connected assessories complete all as specified and directed.

Taking down bib taps in in any description including connected assessories complete all as specified and directed.

Taking down pillar taps in any description including connected assessories complete all as specified and directed.

Taking down PVC flushing cistern in any description including connected assessories complete all as specified and directed.

Taking down vitreous china urinals in any description including assessories complete all as specified and directed.

Taking down W.C. Pan of all sizes including disposal of malba complete as per directions of Engineer-in-Charge.

Excavating in post holes upto 0.5 cum including getting out any kind of soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m complete all as specified and directed.

Surface dressing of the ground including removing vegetation not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m in any kind of soil complete all as specified and directed.

Taking down old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

M&L for rendering 12mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for two Coats of Distempering with oil bound washable distemper on old surface of approved brand and manufacture to give an even shade : over and including water thinnable priming coat with cement primer VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete complete all as specified and directed.

M&L for white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.

M&L for acrylic distemper two coats on new surface(ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/ litre, of approved brand and manufacturer wherever required to achieve even shade and colour over a coat of primmer complete all as specified and directed.

M&L for GI tubing of size 15mm dia nominal bore complete with GI fitting MS clamps, I/C cutting and making good the walls ect complete all as specified and directed.

M&L for GI tubing of size 20mm dia nominal bore complete with GI fitting MS clamps, I/C cutting and making good the walls ect complete all as specified and directed.

S&F white vitreous china pedestal type water closet (European type W.C. pan)with ISI marked white solid plastic seat and lid, including 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

S&F 8 mm dia S.S. Jet spray with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

S&F White Vitreous China Wash hand basin size 630x450 mm with a pair C.I. brackets, 15 mm C.P. brass pillar taps, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and directed.

S&F CP Brass 32mm size Bottle Trap of approved quality & make complete all as specified and directed.

S&F P.V.C. waste flexiable 32 mm dia pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and directed.

S&F 100 mm sand cast Iron grating for gully trap complete all as specified and directed.

S&F white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete all as specified and directed.

S&F 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

S&F of metal visitors bench of size (L x D x H) 1820x690x790mm mild steel border powder coated constisting of :- (a) Seat & back single section. (b) Seat is 430 mm from ground. © perforated mild steel powder coated. (d) seat thickness 1.2mm. (e) Seat with 520mm. (f) Beam mild steel with black powder coating thickness 1.6mm (g) Mild steel handles powder coated & die pressed legs at the end of chairs (h) gross weight of regular 3 seater will be 30 Kg. Make : Durian, Featherlite, Methodex, Godrej & Boyce

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurledweb of 50 mm and flange of26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clipsacross the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level, suitably fixed complete all as specified and directed.

S&F factory made, chamfered edge rubber moulded Cement Concrete paver blocks of M-35 grade, 60 mm thick in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F of Digital score display board Single sided indoor type size 1660mm x 1020mm x 100mm ,character height 6 inch, cluster LED based, Wall mounting for bidminton court including display mounting arragment all as specifed by manufacturer and directed by Engr-in-Charge. Make:- 1. Vertaxis Futuretech Pvt Ltd, Dhayri 411041. 2. Axis Technogies Dhayri -411041 3. Xtreme media , Wadala, Mumbai - 400031.

Supply only badminton umpire chair, mild steel, powder coated moveable four legs as per international standard complete all as specified and directed by Engr-in-charge. Make : Durian, Featherlite, Methodex, Godrej & Boyce

M & L for Brick work with fly ash modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep in cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.

M&L providing and laying Polished Granite stone as in window cills, jambs, Steps, riser in required design and patterns, in linear as well as curvilinear portions of the building with 16 to18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

E/M PORTION S&F wiring for light point/ fan point/exhaust fan point/call bell point / 5A power point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in wall/surface / recessed medium class PVC conduit , with MODULAR type switch, modular plate, suitable G.I.box earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. complete all as specified and directed.

S&F wiring for light point/ 15A power point with 2x4 sq.mm. FRLS PVC insulated copper conductor single core cable in wall/surface/recessed medium class PVC conduit along with 1x4 Sqmm, FRLS PVC insulated copper conductor single core for loop earthing complete all as specified and directed.

Supply and fixing of 25 mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit complete all as specified and directed.

S&F 90 w ceiling/wall mounted LED Flood light fitting complete all as specified and directed.

S&F 10 w 2ft LED type mirror light fitting complete all as specified and directed.

S&F 25 w LED type building security light fitting complete all as specified and directed.

S&F MCB DB 240 V SPN 6 way on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc complete all as specified and directed. (But without MCB/RCCB/Isolators)

S&F MCB DB 240 V SPN 4 way on surface/recess , complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc complete all as specified and directed. (But without MCB/RCCB/Isolators)

S&F 4 way double door horizontal type TPN sheet steel MCB DB 415 V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc complete all as specified and directed. (But without MCB/RCCB/Isolators)

S&F 3 pin 5/6 A modular switch / socket outlet on switch box /cover including connections etc complete all as specified and directed.

S&F 6 pin 15/16 A modular switch / socket outlet on switch box /cover including connections etc complete all as specified and directed.

S&F 3 pin 5A ceiling rose on existing junction box / wooden block /wall including connections etc complete all as specified and directed.

S&F 5-32 A 240 V 10 KA 'C' curve type MCB suitable for inductive load of following poles in MCB DB complete with connections, testing & commissioning complete all as specified and directed :- (a) Single pole & neutral 20A

(b) Single pole 6A

(c) TPN 32A

Wiring for submain wiring along with earth wire with following sizes with FRLS PVC insulated copper conductor single core cable 2x4 Sqmm + 1x4Sqmm earth conductor in surface / recess/wall medium PVC conduit complete all as specified and directed.

Supply & lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 sq. mm 2 core with proper clamping on wall /pillar/ pole etc & through DWC complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level and connected to earth plate surrounded by 15cm thick packed layers of charcoal dust and common salt and conected to GI wire 4mm dia by means of bolts, nuts check nuts and wahsers of galvaised iron or steel and thimbles and otehr end of the earth wire connected to DB and protected by galvaised iron or steel pipe light grade 15mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and Rcc cover complete all as specified and directed.

Smruti Construction (BID ID -3255228)

Galaxy Construction (BID ID -3260278)

Santosh Popatrao Sarode (BID ID -3262420)

Siddhant Hukumchand kumath (BID ID -3256045)

sardar construction (BID ID -3256891)