Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-Finance | ₹1.1 Cr | L1 | Accepted-Finance Being L1 |
| 2 | L2₹1.2 Cr+₹10.6 L (9.51%)Rejected-Finance | ₹1.2 Cr+₹10.6 L (9.51%) | L2 | Rejected-Finance Being L2 |
| 3 | L3₹1.3 Cr+₹15.7 L (14.1%)Rejected-Finance | ₹1.3 Cr+₹15.7 L (14.1%) | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹1.2 L
Closing Date
10 Jan 2023, 4:00 pmClosed
Chief Engineer D and R
Office of Chief Engineer D and R, Kohima Nagaland
Installation of New DTs with Associated HT and LT Works at Medical College, Kohima.
2023_DP_511_2
CEL/DR/D1/22/DW/HFW/1536
Open Tender
Electrical Works
Works
120 days
Kohima
Refer tender documents
3 documents required · 3 mandatory
₹5,000
Chief Engineer D and R
₹1.2 L
11 Jan 2023
9 Jan 2023
11 Jan 2023
9 Jan 2023
10 Jan 2023
9 Jan 2023
Amount
INSTALLATION OF 3 NOS. OF NEW 250 KVA , 11/0.415 KV DISTRIBUTION TRANSFORMER FOR HOSTEL, SPORTS COMPLEX, APARTMENTS & RESIDENTIAL COMPLEX.
GI Steel tubular pole SP-35
250 KVA, 11/0,4 KV Transformer (CU Wound) raised RCC Plint/Platform mounted. Note the DTs shall be of 4 star and above ratings as per IPDS Specifications.
GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))
M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)
Lightning arrestor, Distribution Class (9KV, 5KA, 1Ph). (Lamco/Oblum or other superior brands).
11 KV GO air break switch complete 3-ph (heavy duty) (Yamuna/RPG/RM Electricals make)
11 KV D.O. fuse with operating rod (heavy duty) (Yamuna/RPG/RM Electricals make)
GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Pole Earthing
Earthing Materials for Transformer and LA
i) Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each), for neutral and body - 2 nos
i) Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA
ii) Copper wire 5 SWG for Neutral (12 Mtrs ), Body (12 Mtrs) and LA (20 Mtrs), weighing 0.204Kg per mtr.
iii) Charcoal - (20kg/bag)
iv) salt - 50Kg
v) 2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)
DTR Distribution Cubicle for 250 kVA DTRs comprising of following items and adequate cable ferrules/glands. i) Copper/Aluminium Bus Bar (4 nos), ii) MCCB 320 Amps (4 pole) for incomer conforming to L&T/Schneider make, iii) AMR , DLMS Complaint 3ph 4 wire trivector LT Meter, 5 Amp rated current conforming to Secure/Genus/ L&T make, iv) 3 ph LTCT (4nos) 400/5 A enclosed in metallic box with input and out put lugs terminals or butterfly type for fitting on LT bushing conforming to Secure or other superior make, v) 8 nos of 200 Amps Kit kat for 2 nos of outgoing feeders (Heay Duty)
ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.
11 KV polymer pin insulator complete with GI Pin (Yamuna/Denson/Compag/RPG make)
11 kV Polymer Disc insulator 70 KN (Yamuna/Denson/Compag/RPG make)
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
Tension clamp for ACSR Weasel
PG Clamp for Weasel
LT XLPE Single Core Aluminium Conductor Power Cable of KEI/Havells/Polycab make
i) 240 Sqmm (AL) for DTR LT Bushing to Bus Bar
ii) 185 Sqmm (AL) (for Bus to line 2 CKt)
iii). 150 Sqmm (AL) (for Neutral)
Copper Tubular Terminal ends/Lugs heavy duty (Dowells or other superior make)
i). 240 Sq. mm
ii) 185 Sqmm
iii). 150 Sq. mm
GI M. S. nuts and bolts with MS washer(Assorted)
Danger plate 11KV
Aluminium Tape
Pole double clamp of G.I flat 50x6 mm
Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate
GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil
MS Rod Welded Mesh (15x2.44) for Fencing of Sub-station .
G. I Pipe 2" for Fencing Post
INSTALLATION OF 1 NOS. OF NEW 500 KVA , 11/0.415 KV DISTRIBUTION TRANSFORMER FOR COLLEGE.
GI Steel tubular pole SP-35
500 KVA, 11/0,4 KV Transformer (CU Wound) raised RCC Plint/Platform mounted. Note the DTs shall be of 4 star and above ratings as per IPDS Specifications.
GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))
M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)
Lightning arrestor, Distribution Class (9KV, 5KA, 1Ph). (Lamco/Oblum or other superior brands).
11 KV GO air break switch complete 3-ph (heavy duty) (Yamuna/RPG/RM Electricals make)
11 KV D.O. fuse with operating rod (heavy duty) (Yamuna/RPG/RM Electricals make)
GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing
Earthing Materials for Transformer and LA
i) Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each), for neutral and body - 2 nos
i) Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA
ii) Copper wire 5 SWG for Neutral (12 Mtrs ), Body (12 Mtrs) and LA (20 Mtrs), weighing 0.204Kg per mtr.
iii) Charcoal - (20kg/bag)
iv) salt - 50Kg
v) 2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)
DTR Distribution Cubicle for 500 kVA DTRs comprising of following items and adequate cable ferrules/glands, i) Copper/Aluminium Bus Bar (4 nos), ii) MCCB 320 Amps (4 pole) for incomer conforming to L&T/Schneider make, iii) AMR , DLMS Complaint 3ph 4 wire trivector LT Meter, 5 Amp rated current conforming to Secure/Genus/ L&T make, iv) 3 ph LTCT (4nos) 400/5 A enclosed in metallic box with input and out put lugs terminals or butterfly type for fitting on LT bushing conforming to Secure or other superior make, v) 8 nos of 200 Amps Kit kat for 2 nos of outgoing feeders (Heay Duty)
ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.
11 KV polymer pin insulator complete with GI Pin (Yamuna/Denson/Compag/RPG make)
11 kV Polymer Disc insulator 70 KN (Yamuna/Denson/Compag/RPG make)
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
Tension clamp for ACSR Weasel
PG Clamp for Weasel
LT XLPE Single Core Aluminium Conductor Power Cable of KEI/Havells/Polycab make
i) 400 Sqmm (AL) for DTR LT Bushing to Bus Bar
ii) 300 Sqmm (AL) (for Bus to line 2 CKt)
iii). 185 Sqmm (AL) (for Neutral)
Copper Tubular Terminal ends/Lugs heavy duty (Dowells or other superior make)
i). 400 Sq. mm
ii) 300 Sqmm
iii). 185 Sq. mm
GI M. S. nuts and bolts with MS washer(Assorted)
Danger plate 11KV
Aluminium Tape
Pole double clamp of G.I flat 50x6 mm
Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate
GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil
MS Rod Welded Mesh (15x2.44) for Fencing of Sub-station .
G. I Pipe 2" for Fencing Post
CONSTRUCTION OF 1.2 KM NEW 11KV OUTGOING FEEDERS FOR POWER DISTRIBUTION OF MEDICAL CAMPUS AND CONNECTING 6 NOS OF NEW DTS. ( 5DP and 5 SP line specification of 100M span length each)
GI Steel Tubular Pole SP-45
GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each
GI MS Angle 50X50X6mm - 2.5 M Long weighing 11.25Kg each for Guard Brackets DP 5 Nos and for SP 5 nos)
GI MS Angle 50X50X6mm - 5 M Long weighing 22.5Kg each. for DP Bracing
11 kV Polymer Disc insulator 70 KN (DP-36Nos + 3 Spare). Yamuna/Denson/RPG/Compag make
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
11 KV polymer pin insulator (SP- 15 Nos + 3 Spare). Yamuna/Denson/RPG/Compag make
ASCR "Weasel" conductor
Tension clamp for ACSR Weasel
3 inch C.I earthing pipe each of 3.0 meters conforming to relevant ISS
G. I. wire , 8 SWG for guarding (5.71 Kg per Span) - for 5 spans
G. I. wire , 6 SWG for earthing
HT stay set with 11 KV guy insulator
PG clamp, for ACSR Weasel
11kV Danger plate
GI nuts and bolts with GI washer (Assorted) inlcuding 12" through bolts for DP cross arms
Barbed wire
G.I Stay wire , 7/10 SWG
i) 115 mm dia (Top). -Double (jam) Clamp for DP cross arm channel support and Stay.
ii) 140 mm dia (Mid) - Single Clamp for Bracing support
i) 115 mm dia (Top). -Double (jam) Clamp for Stay
ii) 115 mm dia (Top) - Single Clamp for Cross Arm channel Support
Sundries
CONSTRUCTION OF 2KM NEW LT 3Ph 5 WIRE LT DISTIBUTION LINE ASSOCAITED WITH 6 NEW DTS FOR ELECTRIFICATION OF MEDICAL CAMPUS ( 20 SP line specification of 50 M span length each)
GI Steel Tubular Pole SP 35
GI MS Angle 40x40x5mm for LT cross arm - 1.5 M Long weighing 5.25 Kg each
Pole clamp of GI flat 50x6 mm size for SP 35 SP Structure
i) 90 mm dia (Top) - Single Clamp for Cross Arm support
i) 90 mm dia (Top). -Double (jam) Clamp for Shackle Strap and Stay.
LT Pin Insulator (Porcelain) with G.I Pin. Aditya Birla/Rashtriya or superior brand
Shackel Insulator (Porcelain) (75x90)mm Aditya Birla/Rashtriya or superior brand
GI Shackle Straps (D Clamp) with bolts
AAC Asther conductor for Phases and Neutral
AAC Gnat Conductor for Street Light
GI Nuts & Bolts assorted with washer
LT Stay Set (Galvanised)
LT Guy insulator (porcelain)
GI 7/12 SWG Stay wire for LT stay set
LED Street Light (60W) Fixtures with Brackets, supports & Accessories & PVC wires (2.5 Sqmm)
CONSTRUCTION OF 1.5 KM NEW LT 1Ph 2 WIRE LT LINE for Compound Lighting ( 20 SP line specification of 50 M span length each)
GI Steel Tubular Pole SP 28
GI MS Angle 40x40x5mm for LT cross arm - 1.5 M Long weighing 5.25 Kg each
Pole clamp of GI flat 50x6 mm size for SP 28 SP Structure
i) 89 mm dia (Top) - Single Clamp for Cross Arm support
i) 89 mm dia (Top). -Double (jam) clamp for Shackle Strap and Stay.
LT Pin Insulator (Porcelain) with G.I Pin. Aditya Birla/Rashtriya or superior brand
Shackel Insulator (Porcelain) (75x90)mm Aditya Birla/Rashtriya or superior brand
GI Shackle Straps (D Clamp) with bolts
AAC Gnat Conductor for Phase and Neutral of Street Light
GI Nuts & Bolts assorted with washer
LT Stay Set (Galvanised)
LT Guy insulator (porcelain)
GI 7/12 SWG Stay wire for LT stay set
LED Street Light (60W) Fixtures with Brackets, supports & Accessories & PVC wires (2.5 Sqmm)
Description of Work / Item(s)
Amount
INSTALLATION OF 3 NOS. OF NEW 250 KVA , 11/0.415 KV DISTRIBUTION TRANSFORMER FOR HOSTEL, SPORTS COMPLEX, APARTMENTS & RESIDENTIAL COMPLEX.
GI Steel tubular pole SP-35
250 KVA, 11/0,4 KV Transformer (CU Wound) raised RCC Plint/Platform mounted. Note the DTs shall be of 4 star and above ratings as per IPDS Specifications.
GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))
M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)
Lightning arrestor, Distribution Class (9KV, 5KA, 1Ph). (Lamco/Oblum or other superior brands).
11 KV GO air break switch complete 3-ph (heavy duty) (Yamuna/RPG/RM Electricals make)
11 KV D.O. fuse with operating rod (heavy duty) (Yamuna/RPG/RM Electricals make)
GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Pole Earthing
Earthing Materials for Transformer and LA
i) Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each), for neutral and body - 2 nos
i) Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA
ii) Copper wire 5 SWG for Neutral (12 Mtrs ), Body (12 Mtrs) and LA (20 Mtrs), weighing 0.204Kg per mtr.
iii) Charcoal - (20kg/bag)
iv) salt - 50Kg
v) 2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)
DTR Distribution Cubicle for 250 kVA DTRs comprising of following items and adequate cable ferrules/glands. i) Copper/Aluminium Bus Bar (4 nos), ii) MCCB 320 Amps (4 pole) for incomer conforming to L&T/Schneider make, iii) AMR , DLMS Complaint 3ph 4 wire trivector LT Meter, 5 Amp rated current conforming to Secure/Genus/ L&T make, iv) 3 ph LTCT (4nos) 400/5 A enclosed in metallic box with input and out put lugs terminals or butterfly type for fitting on LT bushing conforming to Secure or other superior make, v) 8 nos of 200 Amps Kit kat for 2 nos of outgoing feeders (Heay Duty)
ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.
11 KV polymer pin insulator complete with GI Pin (Yamuna/Denson/Compag/RPG make)
11 kV Polymer Disc insulator 70 KN (Yamuna/Denson/Compag/RPG make)
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
Tension clamp for ACSR Weasel
PG Clamp for Weasel
LT XLPE Single Core Aluminium Conductor Power Cable of KEI/Havells/Polycab make
i) 240 Sqmm (AL) for DTR LT Bushing to Bus Bar
ii) 185 Sqmm (AL) (for Bus to line 2 CKt)
iii). 150 Sqmm (AL) (for Neutral)
Copper Tubular Terminal ends/Lugs heavy duty (Dowells or other superior make)
i). 240 Sq. mm
ii) 185 Sqmm
iii). 150 Sq. mm
GI M. S. nuts and bolts with MS washer(Assorted)
Danger plate 11KV
Aluminium Tape
Pole double clamp of G.I flat 50x6 mm
Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate
GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil
MS Rod Welded Mesh (15x2.44) for Fencing of Sub-station .
G. I Pipe 2" for Fencing Post
INSTALLATION OF 1 NOS. OF NEW 500 KVA , 11/0.415 KV DISTRIBUTION TRANSFORMER FOR COLLEGE.
GI Steel tubular pole SP-35
500 KVA, 11/0,4 KV Transformer (CU Wound) raised RCC Plint/Platform mounted. Note the DTs shall be of 4 star and above ratings as per IPDS Specifications.
GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))
M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)
Lightning arrestor, Distribution Class (9KV, 5KA, 1Ph). (Lamco/Oblum or other superior brands).
11 KV GO air break switch complete 3-ph (heavy duty) (Yamuna/RPG/RM Electricals make)
11 KV D.O. fuse with operating rod (heavy duty) (Yamuna/RPG/RM Electricals make)
GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing
Earthing Materials for Transformer and LA
i) Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each), for neutral and body - 2 nos
i) Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA
ii) Copper wire 5 SWG for Neutral (12 Mtrs ), Body (12 Mtrs) and LA (20 Mtrs), weighing 0.204Kg per mtr.
iii) Charcoal - (20kg/bag)
iv) salt - 50Kg
v) 2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)
DTR Distribution Cubicle for 500 kVA DTRs comprising of following items and adequate cable ferrules/glands, i) Copper/Aluminium Bus Bar (4 nos), ii) MCCB 320 Amps (4 pole) for incomer conforming to L&T/Schneider make, iii) AMR , DLMS Complaint 3ph 4 wire trivector LT Meter, 5 Amp rated current conforming to Secure/Genus/ L&T make, iv) 3 ph LTCT (4nos) 400/5 A enclosed in metallic box with input and out put lugs terminals or butterfly type for fitting on LT bushing conforming to Secure or other superior make, v) 8 nos of 200 Amps Kit kat for 2 nos of outgoing feeders (Heay Duty)
ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.
11 KV polymer pin insulator complete with GI Pin (Yamuna/Denson/Compag/RPG make)
11 kV Polymer Disc insulator 70 KN (Yamuna/Denson/Compag/RPG make)
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
Tension clamp for ACSR Weasel
PG Clamp for Weasel
LT XLPE Single Core Aluminium Conductor Power Cable of KEI/Havells/Polycab make
i) 400 Sqmm (AL) for DTR LT Bushing to Bus Bar
ii) 300 Sqmm (AL) (for Bus to line 2 CKt)
iii). 185 Sqmm (AL) (for Neutral)
Copper Tubular Terminal ends/Lugs heavy duty (Dowells or other superior make)
i). 400 Sq. mm
ii) 300 Sqmm
iii). 185 Sq. mm
GI M. S. nuts and bolts with MS washer(Assorted)
Danger plate 11KV
Aluminium Tape
Pole double clamp of G.I flat 50x6 mm
Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate
GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil
MS Rod Welded Mesh (15x2.44) for Fencing of Sub-station .
G. I Pipe 2" for Fencing Post
CONSTRUCTION OF 1.2 KM NEW 11KV OUTGOING FEEDERS FOR POWER DISTRIBUTION OF MEDICAL CAMPUS AND CONNECTING 6 NOS OF NEW DTS. ( 5DP and 5 SP line specification of 100M span length each)
GI Steel Tubular Pole SP-45
GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each
GI MS Angle 50X50X6mm - 2.5 M Long weighing 11.25Kg each for Guard Brackets DP 5 Nos and for SP 5 nos)
GI MS Angle 50X50X6mm - 5 M Long weighing 22.5Kg each. for DP Bracing
11 kV Polymer Disc insulator 70 KN (DP-36Nos + 3 Spare). Yamuna/Denson/RPG/Compag make
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
11 KV polymer pin insulator (SP- 15 Nos + 3 Spare). Yamuna/Denson/RPG/Compag make
ASCR "Weasel" conductor
Tension clamp for ACSR Weasel
3 inch C.I earthing pipe each of 3.0 meters conforming to relevant ISS
G. I. wire , 8 SWG for guarding (5.71 Kg per Span) - for 5 spans
G. I. wire , 6 SWG for earthing
HT stay set with 11 KV guy insulator
PG clamp, for ACSR Weasel
11kV Danger plate
GI nuts and bolts with GI washer (Assorted) inlcuding 12" through bolts for DP cross arms
Barbed wire
G.I Stay wire , 7/10 SWG
i) 115 mm dia (Top). -Double (jam) Clamp for DP cross arm channel support and Stay.
ii) 140 mm dia (Mid) - Single Clamp for Bracing support
i) 115 mm dia (Top). -Double (jam) Clamp for Stay
ii) 115 mm dia (Top) - Single Clamp for Cross Arm channel Support
Sundries
CONSTRUCTION OF 2KM NEW LT 3Ph 5 WIRE LT DISTIBUTION LINE ASSOCAITED WITH 6 NEW DTS FOR ELECTRIFICATION OF MEDICAL CAMPUS ( 20 SP line specification of 50 M span length each)
GI Steel Tubular Pole SP 35
GI MS Angle 40x40x5mm for LT cross arm - 1.5 M Long weighing 5.25 Kg each
Pole clamp of GI flat 50x6 mm size for SP 35 SP Structure
i) 90 mm dia (Top) - Single Clamp for Cross Arm support
i) 90 mm dia (Top). -Double (jam) Clamp for Shackle Strap and Stay.
LT Pin Insulator (Porcelain) with G.I Pin. Aditya Birla/Rashtriya or superior brand
Shackel Insulator (Porcelain) (75x90)mm Aditya Birla/Rashtriya or superior brand
GI Shackle Straps (D Clamp) with bolts
AAC Asther conductor for Phases and Neutral
AAC Gnat Conductor for Street Light
GI Nuts & Bolts assorted with washer
LT Stay Set (Galvanised)
LT Guy insulator (porcelain)
GI 7/12 SWG Stay wire for LT stay set
LED Street Light (60W) Fixtures with Brackets, supports & Accessories & PVC wires (2.5 Sqmm)
CONSTRUCTION OF 1.5 KM NEW LT 1Ph 2 WIRE LT LINE for Compound Lighting ( 20 SP line specification of 50 M span length each)
GI Steel Tubular Pole SP 28
GI MS Angle 40x40x5mm for LT cross arm - 1.5 M Long weighing 5.25 Kg each
Pole clamp of GI flat 50x6 mm size for SP 28 SP Structure
i) 89 mm dia (Top) - Single Clamp for Cross Arm support
i) 89 mm dia (Top). -Double (jam) clamp for Shackle Strap and Stay.
LT Pin Insulator (Porcelain) with G.I Pin. Aditya Birla/Rashtriya or superior brand
Shackel Insulator (Porcelain) (75x90)mm Aditya Birla/Rashtriya or superior brand
GI Shackle Straps (D Clamp) with bolts
AAC Gnat Conductor for Phase and Neutral of Street Light
GI Nuts & Bolts assorted with washer
LT Stay Set (Galvanised)
LT Guy insulator (porcelain)
GI 7/12 SWG Stay wire for LT stay set
LED Street Light (60W) Fixtures with Brackets, supports & Accessories & PVC wires (2.5 Sqmm)
Description of Work / Item(s)
Amount
ERECTION & CIVIL WORKS
INSTALLATION OF 3 NOS. OF NEW 250 KVA , 11/0.415 KV DISTRIBUTION TRANSFORMER FOR HOSTEL, SPORTS COMPLEX, APARTMENTS & RESIDENTIAL COMPLEX.
Excavation of Pole Pit & Grouting with PCC 1:3:6 incldung cost of cement, sand and agrregate (2ftx2ftx3.5ft per pole - 0.51Cum)
Construction of 250 KVA DT Pad/Platform with Brick and PCC 1:3:6 - ( 1 Cum)
Erection of Double Pole (DP) Structures and fixing of Channels and all other assesories - with following supplied items
GI Steel tubular pole SP-35
250 KVA, 11/0,4 KV Transformer (CU Wound) floor mounted
GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))
M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)
Lightning arrestor, (9KV, 5KA, 1Ph).
11 KV GO air break switch complete 3-ph (heavy duty)
11 KV D.O. fuse with operating rod (heavy duty)
GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing
Installation of Earthing Materials
i) Excavation of Earth Pit (4'x4'*9") - 3nos for Neutral, Body and LA
i) Installation of Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each), for neutral and body - 2 nos
ii) Installation of Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA
iii) Copper wire 5 SWG for Neutral (12 Mtrs ), Body (12 Mtrs) and LA (20 Mtrs), weighing 0.204Kg per mtr.
iv) Charcoal - (20kg/bag)
v) salt - 50Kg
vi) 2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)
DTR Distribution Cubicle for 250 kVA DTRs.
ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.
11 KV polymer pin insulator complete with GI Pin
11 kV Polymer Disc insulator 70 KN
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
Tension clamp for ACSR Weasel
PG Clamp for Weasel
LT XLPE Single Core Aluminium Conductor Power Cable
i) 240 Sqmm (AL) for DTR LT Bushing to Bus Bar
ii) 185 Sqmm (AL) (for Bus to line 2 CKt)
iii). 150 Sqmm (AL) (for Neutral)
Copper Tubular Terminal ends/Lugs heavy duty
i). 240 Sq. mm
ii) 185 Sqmm
iii). 150 Sq. mm
GI M. S. nuts and bolts with MS washer(Assorted)
Danger plate 11KV
Aluminium Tape
Pole double clamp of G.I flat 50x6 mm
Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate
GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil
Fencing of Sub Station
MS Rod Welded Mesh (15x2.44) for Fencing of Sub-station
G. I Pipe 2" for Fencing Post or with other option such as GI MS Angle
INSTALLATION OF 1 NOS. OF NEW 500 KVA , 11/0.415 KV DISTRIBUTION TRANSFORMER FOR COLLEGE.
Excavation of Pole Pit & Grouting with PCC 1:3:6 incldung cost of cement, sand and agrregate (2ftx2ftx3.5ft per pole - 0.51Cum)
Construction of 500 KVA DT Pad/Platform with Brick and PCC 1:3:6 - ( 1 Cum)
Erection of Double Pole (DP) Structures and fixing of Channels and all other assesories - with following supplied items
GI Steel tubular pole SP-35
500 KVA, 11/0,4 KV Transformer (CU Wound) raised RCC Plint/Platform mounted. Note the DTs shall be of 4 star and above ratings as per IPDS Specifications.
GI Channel 100x50x6 mm for X arm, switch D.O. etc. (2.2 Mtrs length weighing 20.24 Kg each))
M.S. Angle 50x50x6 mm for DT LT Bus Bar (2.2 mtr weighing 10 Kg each)
Lightning arrestor, Distribution Class (9KV, 5KA, 1Ph). (Lamco/Oblum or other superior brands).
11 KV GO air break switch complete 3-ph (heavy duty) (Yamuna/RPG/RM Electricals make)
11 KV D.O. fuse with operating rod (heavy duty) (Yamuna/RPG/RM Electricals make)
GI Wire 6 SWG (5 mm dia) weighing 19.2 Kg per 100 metre Coil - for Earthing
Installation of Earthing Materials
i) Excavation of Earth Pit (4'x4'*9") - 3nos for Neutral, Body and LA
i) Installation of Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each), for neutral and body - 2 nos
ii) Installation of Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA
iii) Copper wire 5 SWG for Neutral (12 Mtrs ), Body (12 Mtrs) and LA (20 Mtrs), weighing 0.204Kg per mtr.
iv) Charcoal - (20kg/bag)
v) salt - 50Kg
vi) 2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)
DTR Distribution Cubicle for 500 kVA DTRs comprising of following items and adequate cable ferrules/glands.
ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.
11 KV polymer pin insulator complete with GI Pin (Yamuna/Denson/Compag/RPG make)
11 kV Polymer Disc insulator 70 KN (Yamuna/Denson/Compag/RPG make)
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
Tension clamp for ACSR Weasel
PG Clamp for Weasel
LT XLPE Single Core Aluminium Conductor Power Cable of KEI/Havells/Polycab make
i) 400 Sqmm (AL) for DTR LT Bushing to Bus Bar
ii) 300 Sqmm (AL) (for Bus to line 2 CKt)
iii). 185 Sqmm (AL) (for Neutral)
Copper Tubular Terminal ends/Lugs heavy duty (Dowells or other superior make)
i). 400 Sq. mm
ii) 300 Sqmm
iii). 185 Sq. mm
GI M. S. nuts and bolts with MS washer(Assorted)
Danger plate 11KV
Aluminium Tape
Pole double clamp of G.I flat 50x6 mm
Stay set 19 mm dia 1.6 mts. Length with stay rod, bow,plate
GI Stay Wire7/10 SWG weighing 43.4 Kg per 100 metres Coil
Fencing of Sub Station
MS Rod Welded Mesh (15x2.44) for Fencing of Sub-station .
G. I Pipe 2" for Fencing Post
CONSTRUCTION OF 1.2 KM NEW 11KV OUTGOING FEEDERS FOR POWER DISTRIBUTION OF MEDICAL CAMPUS AND CONNECTING 6 NOS OF NEW DTS. ( 5DP and 5 SP line specification of 100M span length each)
Detailed Route Survey, investigation including peg marking, profiling/ alignment of route etc. complete as per Technical Specification
Excavation of Pole Pit & Grouting with PCC 1:3:6 incldung cost of cement, sand and agrregate (2ftx2ftx3.5ft per pole - 0.51Cum)
Erection of Double Pole (DP) and Single Pole (SP) Structures - fixing of Cross Arm channels, angles and all accessories etc complete with following supplied items
GI Steel Tubular Pole SP-45
GI MS Channel 100x50x6mm for top Cross Arm - 2.2 M Long weighing 20.24 kg each
GI MS Angle 50X50X6mm - 2.5 M Long weighing 11.25Kg each. (for guard bracket- for DP 5 Nos and for SP Cross Arm Brackets -5 nos)
GI MS Angle 50X50X6mm - 5 M Long weighing 22.5Kg each. for DP Bracing
11 kV Polymer Disc insulator 70 KN (DP-30Nos + 3 Spare)
H/W fittings for Disc insulator (E&S) 70 KN, Tension type
11 KV polymer pin insulator (SP- 15 Nos + 3 Spare)
3 inch C.I earthing pipe each of 3.0 meters conforming to relevant ISS
G. I. wire , 8 SWG for guarding (5.71 Kg per Span)
G. I. wire , 6 SWG for earthing
HT stay set with 11 KV guy insulator
11kV Danger plate
GI nuts and bolts with GI washer (Assorted)
Barbed wire
G.I Stay wire , 7/10 SWG
Pole clamp of GI flat 50x6 mm size
Stringing of line including laying out and sagging out of conductor, guarding, lacing and mid point jointing of conductor, installation of all necessary hardwares and accessories as per technical specification
ASCR "Weasel" conductor
Tension clamp for ACSR Weasel
PG clamp, for ACSR Weasel
Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge
CONSTRUCTION OF 1.3 KM NEW LT 3Ph 5 WIRE LT DISTIBUTION LINE ASSOCAITED WITH 6 NEW DTS FOR ELECTRIFICATION OF MEDICAL CAMPUS ( 20 SP line specification of 50 M span length each)
Detailed Route Survey, investigation including peg marking, profiling/ alignment of route etc. complete as per Technical Specification
Excavation of Pole Pit & Grouting with PCC 1:3:6 incldung cost of cement, sand and agrregate (1ftx1ftx3ft per pole -0.25Cum)
Erection of Single Pole (SP) Structures and fixing of Cross Arm angles, brackets Stay sets, Insulators, hardware fitting (D Clamps), Pole Clamps and all required line accessories etc complete with following supplied items
GI Steel Tubular Pole SP 35
GI MS Angle 40x40x5mm for LT cross arm - 1.5 M Long weighing 5.25 Kg each
Pole clamp of GI flat 50x6 mm size for SP 35 SP Structure
i) 90 mm dia (Top) - Single Clamp for Cross Arm support
i) 90 mm dia (Top). -Double (jam) Clamp for Shackle Strap and Stay.
LT Pin Insulator (Porcelain) with G.I Pin
Shackel Insulator (Porcelain) (75x90)mm
GI Shackle Straps (D Clamp) with bolts
GI Nuts & Bolts assorted with washer
LT Stay Set (Galvanised)
LT Guy insulator (porcelain)
GI 7/12 SWG Stay wire for LT stay set
Stringing of line including laying out and sagging out of conductor, guarding, lacing and mid point jointing of conductor, installation of all necessary hardwares and accessories as per technical specification
AAC Asther conductor for Phases and Neutral
AAC Gnat Conductor for Street Light
Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge
LED Street Light (60W) Fixtures with Brackets, supports & Accessories & PVC wires (2.5 Sqmm)
CONSTRUCTION OF 1.5 KM NEW LT 1Ph 2 WIRE LT LINE for Compound Lighting ( 20 SP line specification of 50 M span length each)
Detailed Route Survey, investigation including peg marking, profiling/ alignment of route etc. complete as per Technical Specification
Excavation of Pole Pit & Grouting with PCC 1:3:6 including cost of cement, sand and agrregate (1ftx1ftx3ft per pole -0.25Cum)
Erection of Single Pole (SP) Structures and fixing of Cross Arm angles, brackets Stay sets, Insulators, hardware fitting (D Clamps), Pole Clamps and all required line accessories etc complete with following supplied items
GI Steel Tubular Pole SP 28
GI MS Angle 40x40x5mm for LT cross arm - 1.5 M Long weighing 5.25 Kg each
i) 89 mm dia (Top) - Single Clamp for Cross Arm support
i) 89 mm dia (Top). -Double (jam) clamp for Shackle Strap and Stay.
LT Pin Insulator (Porcelain) with G.I Pin. Aditya Birla/Rashtriya or superior brand
Shackel Insulator (Porcelain) (75x90)mm Aditya Birla/Rashtriya or superior brand
GI Shackle Straps (D Clamp) with bolts
GI Nuts & Bolts assorted with washer
LT Stay Set (Galvanised)
LT Guy insulator (porcelain)
GI 7/12 SWG Stay wire for LT stay set
Stringing of line including laying out and sagging out of conductor, guarding, lacing and mid point jointing of conductor, installation of all necessary hardwares and accessories as per technical specification
AAC Gnat Conductor for Phase and Neutral of Street Light
Tree cutting along the line including trimming, looping, branching etc. as required to maintain statutory electrical clearance as per the direction of Engineer-in-charge
LED Street Light (60W) Fixtures with Brackets, supports & Accessories & PVC wires (2.5 Sqmm)
Description of Work / Item(s)
Amount
GST as applicable on all Supply items & F&I as per schedule 1 and 2.
GST as applicable on Erection & Civil works as per schedule 3.
Description of Work / Item(s)
Amount
TOTAL SCHEDULE NO. 1
Supply of Materials as per Price Schedule- 1
TOTAL SCHEDULE NO. 2
Local Transportation, Insurance and other Incidental Services as per Price Schedule- 2
TOTAL SCHEDULE NO. 3
Erection & Civil Works as per Price Schedule- 3
TOTAL SCHEDULE NO. 4
GST as applicable as per Price Schedule- 4
NATIONAL POWER SYSTEMS
CARAVAN POWER AND CONSTRUCTIONS (I) PVT. LTD.
NATIONAL POWER SYSTEMS
CARAVAN POWER AND CONSTRUCTIONS (I) PVT. LTD.
CARAVAN POWER AND CONSTRUCTIONS (I) PVT. LTD.
M/s Mecavo Power Works
NATIONAL POWER SYSTEMS
CARAVAN POWER AND CONSTRUCTIONS (I) PVT. LTD.
NATIONAL POWER SYSTEMS
CARAVAN POWER AND CONSTRUCTIONS (I) PVT. LTD.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .