Electrical work connection to- (1) Siwan:- Yard remodeling with essential additional traffic facilities work (3 running lines, conversion of no running line into running line, Dockcab PF ete), (2) augmentation of S & T assets by provision by electronic interlocking at HTW station in connection with BPCL siding., (3) At THE-Phase-II- Provision of one stabling line(700m) and one running line (750m)(AC in SS/ASM office at the station of THE-SV & SV-BTT sec.)

Schedule () A-Electrical work connection to- (1) Siwan:- Yard remodeling with essential additional traffic facilities work (3 running lines, conversion of no running Above/ line into running line, Dockcab PF ete), (2) augmentation of S & T assets by provision 6813574.14 Below/P by electronic interlocking at HTW station in connection with BPCL siding., (3) At THE- ar Phase-II-Provision of one stabling line(700m) and one running line (750m)(AC in SS/ASM office at the station of THE-SV & SV-BTT sec.)

Description:- Supply, recessing and fixing of PVC conduit pipe 25 mm (Medium) dia conforming to

making chase, plastering/ clamping etc. and making the wall good in and original condition with white washing/ colouring etc. as per site requirement.

IS:9537/Part III/ 1983 (Latest Version) with accessories, junction box etc. including clamping etc. as per site requirement.

Description:- Supply and wiring of 1.5 sqmm PVC insulated multi stranded copper conductor single

conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection ,testing and commissioning as required.

Description:- Supply and wiring of 2.5 sq.mm PVC insulated multi stranded copper conductor

(recessed/surface) PVC conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection ,testing and commissioning as required. VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY

Description:- Supply and wiring of 4.0 sq.mm PVC insulated multi stranded copper conductor

(recessed/surface) PVC conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection ,testing and commissioning as required.

Description:- Supply and wiring of 6.0 sq.mm PVC insulated multi stranded copper conductor

(recessed/surface) PVC conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection ,testing and commissioning as required.

Description:- Supply and wiring of 10.0 sqmm PVC insulated multi stranded copper conductor

(recessed/surface) PVC conduit pipe for wiring of point wiring/circuit wiring/ sub main/ main as required including connection ,testing and commissioning as required.

Description:- Supply of PVC insulated multi stranded copper conductor single core 1.0 sq.mm PVC

IS:694/1990 (Latest version) and for earthing and drawing in already laid PVC conduit pipe for wiring / sub main/ main as required including connection, testing and commissioning as per site required.

junction box of laid conduit including connections, testing and commissioning as required.

Description:- Supply and erection of Modular Metal boxes concealed Boards along with white finish

Metal board boxes are to be concealed in wall of size suitable 2 modules. G.I Metal boxes confirming to IS14772:2000 or latest.

Description:- Supply and erection of Modular Metal boxes concealed Boards along with white finish

Metal board boxes are to be concealed in wall of size suitable 6 modules. G.I Metal boxes confirming to IS14772:2000 or latest.

Description:- Supply and erection of Modular Metal boxes concealed Boards suitable for white

regulators. Metal board boxes are to be concealed in wall of size suitable 3 modules. G.I Metal boxes confirming to IS14772:2000 or latest.

suitable 3 modules suitable for mounting of Modular type switches/plug socket, fan regulator and connection to wiring.

Description:- Supply and erection of Modular Metal boxes concealed Boards suitable for white

regulators. Metal board boxes are to be concealed in wall of size suitable 8 modules. G.I Metal boxes confirming to IS14772:2000 or latest.

suitable 8 modules suitable for mounting of Modular type switches/plug socket, fan regulator and connection to wiring.

Description:- Supply and erection of Modular Metal boxes concealed Boards suitable for white

regulators. Metal board boxes are to be concealed in wall of size suitable 12 modules. G.I Metal boxes confirming to IS14772:2000 or latest.

suitable 12 modules suitable for mounting of Modular type switches/plug socket, fan regulator and connection to wiring.

way) complete in all respect. Switches confirming to IS3854:1997 or latest. VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY

outlet 3/5 Pin 10A complete in all respect. Socket confirming to IS1293:2005 or latest.

(1-way) complete in all respect. Switches confirming to IS3854:1997 or latest.

3/5 Pin 16/20A with shutter complete in all respect. Socket confirming to IS1293:2005 or latest.

electronic Regulator complete in all respect. Regulators confirming to IS11037:1984 or latest.

installation on the junction box of laid conduit including connections, testing and commissioning as required.

Description:- Provision of Earth pit with supply and fixing of GI earth pipe medium class 4.5 mts

earth electrode. And Supply & laying of 6 SWG GI wire as conductor electrode in 15mm dia GI pipe including soldering etc connection should be done as per drawing attached and as per attached Specification.

Description:- Supply , testing and commissioning of sheet steel clad dust and vermin proof floor mounted type Junction box of dimension at least (Length-0.75Mtr, Height-0.60 Mtr, Width-0.50 Mtr) with 14 SWG CR sheet for main supporting frame and 16 SWG CR sheet for doors & covers including

and other hardware as required with RYB led indicator, Danger board, end termination of existing cables in junction box with lugs, glands and hardware, cleaning and painting of synthetic enamel spray paint (Double coating) including Making Plinth (Brick work) of size 0.8x0.6x0.6 Mtr for Junction box as per direction of Engineer In-charge at site.

Description:- Supply, fabrication, and erection of fabricated structure angle iron 35x35x5mm

arrangement of different equipment complete with clamp, nut bolt etc complete in all respect as per site requirement.

Description:- Supply, Installation, testing and commissioning of self- contained drinking water

storage capacity, 170 (liters/Hr.) cooling capacity, 4 faucets, faster cooling, Eco friendly, stainless steel body, stainless steel tank in power saving PUF insulation, Easy controls speedy drainage and suitable for 230 volts/ single phase /50 Hz AC supply complete in all respect.

Description:- Supply, installation, testing and commissioning of 25-liter capacity vertical Geyser.

power input 2000 watts, 230v, single phase , 50 Hz, AC made of ultra thick super cold rolled steel plates with wall mounted accessories..

mounted Voltage Stabilizer, 220V, input Voltage 140V-260V, single phase complete and conforming to IS :11260/1985 or latest.

Description:- Supply, installation, testing and commissioning of 30 A plug- sockets boards enclosure with 30A PN &E Metal plug & socket along with 25A SP MCB. Sheet steel enclosure shall

MCB shall confirm to IS/IEC -60898-1-2002 (latest version), ISI Marked, with visible coloured contact position indicator and Degree of protection IP20. Provision shall be in conformity with IS :732/1989 (Latest version), IS : 4648/1968 (Latest Version).

Description:- Supply, Installation testing and commissioning of 2+4 ways single door, sheet steel, phosphatized, powder painted MCB DBs with bus bar, neutral link, Earth bar and din rail fitted with

required. MCB DBs conforming to IS13032, IS 8623,BS 5486 and MCB conforming to IS 8828:1996, IEC 60898:2002 or latest. VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY

Description:- Supplying and fixing of 4 ways (4+12) double door surface/ recess mounting, vertical

inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (with 100A MCB, 4 Pole ,415V-01 No & 16-32A MCB SP- 12 Nos) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Description:- Supply, Installation, Testing and Commissioning of Phase Selector TPN Distribution Board with Metal door powder painted with inbuilt 3 Nos 63 Amp Phase Selector, 100 A copper bus

SP outgoing (8 Way in each phase), earth bar and Din rail etc. conforming to IS: 13032/1991 and IS

and 24 No. MCB Single Pole 6/10/16/25 Amp 10 KA, 230 VAC complete in all respect including connection as required

arrangement. Cable laying work shall be governed by IS :1255/1983.(cable supplied by Railway).

Description:- Laying of one number XLPE cable of 1100V grade of size exceeding 25 sqmm but not exceeding 400 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as req. Cable laying work shall be governed by IS :1255/1983.(cable

a bedding of minimum 75 mm riddled soil or sand at the bottom of the trench, and covering it with additional riddled soil or sand of minimum 75 mm and protecting it by means of tiles, bricks or slabs. (II) Depth - The desired minimum depth of laying from ground surface to the top of cable is as follows: Low voltage and control cables -0.75 m, Cables at road crossings 1.00 m, Cables at railway level crossings (measured from bottom of sleepers to the top of pipe)- 1.00 m

Description:- Laying of one number additional XLPE cable of 1100V grade of size exceeding 25

formation including excavation, sand cushioning, protective covering and refilling the trench etc as req. Cable laying work shall be governed by IS :1255/1983.(cable supplied by Railway).

core sand & 4 graded stone aggregate 20 mm nominal size) OR stone inscription duly engraved as per attached Drg no-DyCEE/W/LJN/2011/01.

Description:- All work pertaining to Horizontal Directional drilling (HDD/ Boring and trenchless cable it includes supply transportation and insertion of self-lubricated HDPE/ CI pipe and laying of cable in

be crossed. The depth of horizontal boring should be minimum 1.64 mtr. from rail flange/ road level. HDPE Pipe of IS: 4984/1995. Note: By using self-lubricated HDPE pipe of 117 mm inner dia and 125 mm outer dia in the bore and the laying of cable in the bore under the track/road as per direction of Engineer in charge.

Description:- Supply installation testing & commissioning of MCCB 63 Amps, 4 pole with sheet steel

including hardware and insulators as required Conforming to IS:13947(Part-II)/1993, IEC60947-2 or (Latest version)

capacity 25 kA at 415 V, 50Hz, complete with enclosure as required, Conforming to IS/IEC:60947 (Pt.-II)/2003 or latest.

Description:- Supply of LED Tube light with fitting power rating (in watt): 24, Lamp Efficacy (Lumen/watt) minimum :100 Colour Temperature (in K): 6500, Ingress protection in IP: IP 20,

100-300, Power factor: >/= 0.9, Warranty for free replacement (Years): 1 year, installation, connection with twin core PVC insulated flexible copper conductor cable of size 14/0.193 mm. including testing and commissioning.

VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Supply, installation, testing and commissioning of Ceiling fan 1200 mm sweep, Motor:

No. of Blades: 3, Rated Voltage: 140-285 V AC, 50 Hz AC, Service Ratio>/=7.5, Rated speed in RPM: 340, Service Value >/= 7.5, conforming to IS:374/1979 and IS:374/2019 or latest, Conformity to Safety Standard IS: 302/1979 connection with twin core PVC insulated flexible copper conductor cable of size 14/0.193 mm including earthing.

Description:- Supply of ISI Marked capacitor type propeller type ac ventilating fan- exhaust size

Hz, single phase A.C. supply with installation, testing and commissioning and connection with 2.5 sq.mm copper conductor and fixing/grouting the nut and bolts of suitable size & including making the hole on wall & colouring etc. as per site requirement.

Description:- "Supply, Erection, testing & commissioning of energy efficient LED street light luminary 60-70 Watt capacity with luminous efficacy greater than equal to 100 made from pressure die cast aluminum housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP 65/66 Protection suitable for working on 240 Volt, 50

pole/truss/ roof/ wall by fabrication by suitable clamp/ bracket made/pipe from G.I. flat of 40 x 6 mm approx. duly painted with nut, bolts and washers of 12 mm diameter as per site requirement. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire from the existing ceiling rose /catenaries/ junction box as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit.

Ton, Split AC (AC supplied by Railway)

clamping with erected pole or wall as per technical specification for passing cable of different size.

Description:- Supply, installation, testing & commissioning of Automatic changeover wall mounted

indicator with wiring etc suitable for cyclic operation of two any type of Air-Conditioner. Each AC can be kept ON from 1 hour to 24 hours. Complete in all aspect.

Description:- Supply, installation, Testing and Commissioning 16-meter long high mast lighting system complete with the following works:-1.1 Supply of 16-meter high mast system:- The mast shaft shall be in two sections hot dip galvanized inside and outside in single dip, suitable for wind velocity as per IS:875 part 3. There shall be only one longitudinal seam weld per section and no circumferential weld. It shall also include accessories for high mast including head frame, 2 point suspension system with stainless steel wire rope trailing cable, connector, 6 mm dia double drum winch, galvanized lantern carriage arrangement suitable for 08 luminaries LED type symmetrically arranged. The mast shall have an integral power tool motor, manual handle, junction box at the base compartment for its operation. 1.2 Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates & common template (Set 01) 1.3 Supply, fixing, testing and commissioning of LED flood light fixture 250 watt, power factor not less than 0.95 and LED driver should be constant voltage & current and fitting should be IP 66-08 Nos. LED fitting shall conform to BIS specification No. 10322 (Pt.5/sec. 1)/2012 or latest. 1.4 Supply of LED type single dome aviation obstruction light. 1.5 Design & making of outdoor stand mounted feeder pillar control panel with 63 Amps TPN MCB incomer, single dial time switch, 45 Amps TP contractor for the automatic switching

incoming 35 mm & outgoing 16 & 2.5 mm2 terminals. (set 01) 2. Erection Part:-2.1 Design construction & erection of suitable shallow foundation with M20 concrete for the high mast considering the safe soil bearing capacity at site as 10 T/ sq.mtr at 2 mtr depth with all material & labour (Job-01) 2.2 Erection of the high mast with the help of suitable equipment and wiring of luminaries with all wiring material like PVC insulated, PVC sheathed flexible cable of suitable copper conductor, cable lugs, MCB etc and all labours. 2.3 Provision of G.I. pipe earthing arrangement for high mast with 4.5 M long 40 mm dia G.I. pipe including connection to high mast earth terminal with

2.4 Installation, testing and commissioning of control panel on suitable foundation including all material & labour (Job 01). Note: -1. High mast system should be as per enclosed specification. Note: - Complete High Mast system with LED flood light shall be inspected by the RITES as per specification at the manufacture premises and inspection cost shall be borne by the contractor. (Successful Tenderer shall submit WARRANTEE GUARANTEE (WG) @ 10% of the Contract Value of this item in the prescribed proforma before claiming the payment for this item.) Note: - High Mast and LED flood light fixture 250 Watt shall be guaranteed/warranted for a period of 60 months from the date of commissioning for satisfactory performance.

VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Making of hexagonal platform foundation with Rail post and including all accessories

enclosed with all materials. Note: -1. Only rail pole will be supplied by the railway.2. Cutting of rail post 1750 mm length (each) is included in the scope of work.

sand for repairing of the CC work of platform/Road as per the directive of site in charge complete in all respect. Square

Foot Description:- Design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be

calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. Square

Foot Description:- Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than

calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided.

Description:- Supply, installation, testing, commissioning of ISI Marked Exhaust fan, sweep

conforming to Indian Standard: IS 2312 (latest), suitable for single phase, 50Hz, AC, connection with 2.5 sq.mm copper conductor and fixing/grouting the nut and bolts of suitable size & including making the hole on wall in original condition i.e. colouring etc as per site requirement.

Description:- Supply, installation, testing and commissioning of street light LED based fitting rated power (in watt): 60, Luminaire System Efficacy (Lumen/watt): >/= 100 Lm/Watt, Colour Temperature (K): 6000 +/-500K, Ingress protection (IP Rating) as per IS10322 (Part 1):1982 latest- IP 66, Optic lense material (UV stabilised): Poly carbonate lense, Light source: SMD LED Chip as per LM 80/IS16106, LED make: Osram,Nichia, Cree, Samsung, Seoul, Lumileds, Philips, Syska, Lumenmax,

index (CRI): 70, Beam Angle (Degree): 120, input operating voltage range and frequency: AC 70- 440V, 50Hz, 90 to 300 Volts AC at 50 Hz +/-2, 140 to 270 volts AC at 50 Hz +/- 2 with auto cutt off at below 120V, Automatic Higher cut off voltage above 300 volt: Yes, AC Power factor at full load: 0.95, Warranty for free replacement (in years): 3 years with brackets 1.2 mtr. long made by 25 mm dia G.I. Pipe, clamp made by 40 mm x 6 mm M.S. Flat, nut & bolts including connection 2 x 2.5 sq.mm PVC (type "C") insulated having FR properties copper conductor single core cable ISI marked cable , IS:694/2010 (Latest version) and all other accessories to be required for mounted on Pole/building.

Description:- "Supply, fixing, testing & commissioning of hot dip galvanized octagonal pole 5 mtr.

concert foundation (1:2:4) etc The pole shall be complete with holes, anchor bolts, bottom plate etc. As per Tech spec/site requirement IS/IE rules of following type. Weight of the pole should not be less than 40 Kg Double arm type with 1.5 to 2.0 feet long (Weight 6.5 Kg). "

LEDs complete with all accessories and conforming to specification as attached in tender.

pole / wall/terrace with all necessary clamps to the structure with the provided GI pipe or to any structure as advised by engineer incharge.

59 VARANASI DIVISION-ELECTRICAL/NORTH EASTERN RLY Description:- Dismantling of Damaged Single Rail/Tubular Pole and handed over to concern SSE.

finishing and polishing by cement solution.

length for 200A, 415V, 50Hz complete with all accessories including earthing the body etc. as required