ADDN ALTN TO OH CONDUCTOR TO UG CABLE AND CONNECTED WKS, PROVN OF 100 KVA SERVO VOLTAGE STABILIZER AT P-49 AND AUGMENTATION OF ELECTRIC SUPPLY WITH CONNECTED WKS AT P-78/9 AND CERTAIN MINOR WKS AT DINJAN MIL STN UNDER GE DINJAN

Amount

Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, cable trench etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in with excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.

Materials and labour for clear sand cushioning with dry clean sand for protection of cable, 15cm below the cable and 8cm above the cable, complete all as specified and as directed. Note : Punned thickness shall be measured for payments.

Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Materials and labour plain cement concrete Type B1 1:2:4 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed inclusive of necessary form work complete all as specified and directed.

Material and labour for cutting road / hardstanding and making good disturb surface by using PCC (1:2:4) type C-2 (cusing 20 mm graded stone aggregate ) for fixing the pipe complete all as specified and as directed.

Boring holes 1mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Connected items like Pipes is measured and paid seperately under relevant items).

Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings, fixed to wall/ceiling or laid in floor complete all as specified.

Materials and labour for GI pipe light grade with all fittings complete grouted in ground all as specified for 25 mm bore of pipe laid in trenches/fixed with poles/laid in road/plinth/floor for protection of cable complete all as specified and directed.

Materials and labour for GI pipe light grade with all fittings complete grouted in ground all as specified for 50 mm bore of pipe laid in trenches/fixed with poles/laid in road/plinth/floor for protection of cable complete all as specified and directed.

Materials and labour for GI pipe light grade with all fittings complete grouted in ground all as specified for 80 mm bore of pipe laid in trenches/fixed with poles/laid in road/plinth/floor for protection of cable complete all as specified and directed.

Supply and fixing in repairs, 15mm cromium plated Bib taps, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing in repair 15 mm bore angular stop valve cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capstan head wall flange etc screwed down screwed for iron pipe complete all as specified and directed. .

Supply and fixing in repair 15 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed on surface of wall/ceiling etc with all necessary fittings and accessories and one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 150 sq.mm 3.5 Core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 120 sq.mm 3.5 Core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 95 sq.mm 3.5 Core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 70 sq.mm 3.5 Core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 50 sq.mm 3.5 Core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 25 sq.mm 3.5 Core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 sq.mm 4 core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 sq.mm 2 core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately. complete all as specified and directed.

Supply and fixing Switch socket combination multipurpose 5 Pin, 15/16 Amps, flush type, 240V, complete all as specified and directed.

Supply and fixing MCB Single pole, 240 volts 6 to 32 Amps 10 KA rupturing capacity, C series complete all as specified and directed by Engr-in-charge.

Supply and fixing cable jointing kit of 1.1KV grade for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE, armoured, aluminium conductor cable of size 16 to 50 Sqmm complete all as specified and as directed.

S&F in repair, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps rating, 240 Volt, complete all as specified and as directed.

Dismantling/taking down old aluminium steel reinforced (ACSR) conductor of any size any type from LT overhead line including all jumper, cross arms, clamps, bolts, nuts etc and keeping serviceable materials in safe custody for reuse in the work complete all as specified and as directed

Materials and labour for water proof, three core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of security light from junction box to security light including PVC conduit medium grade complete all as specified and as directed.

S&F in repairs modular junction box made of SMC/FRP of size 240x130x110mm with provision of MCB SP, 6-32A, 10 KA, 'C' Curve, 01 No and connector terminal 4 pole indicating RYB phase colour and neutral colour complete fixed to street light pole with suitable size of mild steel clamps, nuts & bolts complete all as specified and as directed. CAT No : GSJB 2413 of Sintex or equvalent make as per Appx of make list.

Supply and installation 1.5 Ton capacity, hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2. complete all as specified and as directed by Engr- in-Charge

Supply and installation 2.0 Ton capacity, hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2. complete all as specified and as directed by Engr- in-Charge

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage capacity 80 litre and nominal cooling capacity 40 litre per hour, complete all as specified and as directed.

Supply and fix Voltage stabilizer for automatic operation, single phage naturally air cooled for input variation between 170V to 250V with output voltage stabilizer at 230V with accuracy of +_ 2.5% and capacity 5 KVA complete all as specified and directed

Supply and fix Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and as directed.

Supply and fix Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed.

Supply and fix Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed.

Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed.

M&L for earthing with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 420x420x100mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing inclduing taking down old one complete all as specified and as directed.

Supply and fix Galvanised iron strip 32 x 6mm complete with saddles and fixing screws etc. for fitting the strip complete all as specified and as directed.

S&F for water heater storage type, electric, steel body with copper inner tank and heating element upto 2KW, capacity 25 liters, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and as directed.

Supply and fix Voltage stabilizer out door type for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy of ± 1% and speed of correction 8 Volts per second and capacity 100 KVA complete all as specified and directed.

S&F for time switches digital type 415 Volt Three phase of 65 Amp rating with contactor fitted inside and MCB TPN 63 A, max load of 6 KW within steel enclosure complete including connecting items complete all as specified and as directed.

Taking down and refixing of old existing cable including all the items required for installation complete all as specified and as directed.

M&L for design, fabrication, installation, testing and commissioning of CPRI approved factory made Indoor LT main panel board both side openable, epoxy power coated with the following minimum specifications :- (a) LT Panel of size (0.80x0.50x0.50) m, panel made out of 3.15 mm thick CRCA sheet, front and rear outer door and 2mm thick CRCA sheet, for all internal partition walls, inner cabinet doors, and inner covers, IP-42 protection, with simens grey powder coating, Panel shall be fixed on (50X50X6)mm angle frame structure of height 900mm. (b) Panel shall be fabricated as per IP 65 grade protection. (c) Three phase + Neutral Aluminum bus bar – 200A ;All aluminum bus bar and other strips and shall be insulated with heat shrink sleeve of proper colour code. (d) All connection from bus bar to MCCB shall be made with aluminum strip or single core flexible copper wire. (e) Two no’s earthing connections to be connected to the panel board. The panel shall consist following also :- (i) On load change over switch – 1 no. Make – L&T ii) LED Indicator lamps (RYB) - 01 Set. Make – L&T(ESBEE) iii) MCCB 63 Amps Four pole (TPN) 35 KA thermal magnetic based with over load and short circuit protection – 1 no. Make – L&T

Supply, installation, testing and commissioning of Indoor LT Panel (with certification by CPRI / ERDA for IP 54 or higher) for DG Changeover of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Copper bus bar of 800 Amps PVC insulated in step way for 3 phase 4 strip system fixed on hygroscopic base insulator including INCOMER: MCCB 630 Amps, 50 kA, 4 Pole one (01) Nos,1 no. 400A COS and Multifunction meter with LED indicators R/Y/B OUTGOINGS: (i) 320A MCCB, 36kA , 4P - 2 No (Spare) (ii) 250A MCCB, 36kA , 4P - 2 Nos. (iii) 160A MCCB, 36kA , 4P - 1 Nos duly prewired with appropriate size of Copper bus bar thimbled(for accomodating outgoing cable connections) suitable size busbar chamber in order to accomodate all accessories with proper insulation with inlet and outlet cable provisions incorporated

Supply, installation, testing and commissioning of Indoor LT Main Panel (with certification by CPRI / ERDA for IP 54 or higher) for 162 MH of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Copper bus bar of 300 Amps PVC insulated in step way for 3 phase 4 strip system fixed on hygroscopic base insulator including INCOMER: MCCB 320 Amps, 50 kA, 4 Pole in one (01) No., withMultifunction meter with LED indicators R/Y/B OUTGOINGS: (i) 320A MCCB, 36kA , 4P - 1 Nos. (ii) 160A MCCB 36kA, 4P - 2 Nos. duly prewired with appropriate size of Copper bus bar thimbled(for accomodating outgoing cable connections) suitable size busbar chamber in order to accomodate all accessories with proper insulation with inlet and outlet cable provisions incorporated

Supply installation, commissioning and testing including providing all necessary electrical connection, LT Junction box, outdoor type CPRI approved factory made out of 3.15 mm thick MS sheet of size 0.60mx 0.60 mx 0.60 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 Nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate, street light panel of 1.6mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete all as directed by the Engr-in-Charge and comprising of the following accessoriescomplete including following accessories including taking down Old unserviceable box:-(a) Copper bus bar suitable for 200 Amp fixing on suitable capacity and size insulators ---04 nos

Supply installation, commissioning and testing including providing all necessary electrical connection, LT feeder panel board of size 1.5x1.0x0.5 m Outdoor type double door, factory made out of 3.15 mm thick MS sheet having hinge opening arrangement in front and back side and bottom frame made out of angle of size 50 x 50 x 6mm thick and 04 Nos legs 0.6 meter length with cable entry and exist circular hole with cable gland & gasket at bottom complete including painting to all internal and external exposed steel surfaces with power coating paint ( 5 stage process) with duly fixed in ground with necessary PC foundation (1:2:4) type B1, with danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs/glands for incoming and out going cables , bolts , screws ete complete all as specified and directed by Engr-in-charge and comprising of the following accessories.(Note : All the internal connection connected through suitable size of copper bus bar)..(a) Copper bus bar of suitable size for 500 Amp (TPN) including insulator.(b) 320 Amp, 4 Pole MCCB , 50 Hz ,415 V with rupturing capacity 50 KA - 01 No. (In coming).(c) Indicator lamp LED type (set of three Red,Yellow,Blue)----01 Nos.(d) Digital Multifunction meter, Model C, class 1, with relay - 01 No. Make AE/L&T/ABB/HPL.(e)100 Amp, 4 Pole MCCB , 50 Hz ,415 V with rupturing capacity 36 KA - 05 No.

Supply installation, commissioning and testing including providing all necessary electrical connection, LT feeder panel board of size 1.5x1.0x0.5 m Outdoor type double door, factory made out of 3.15 mm thick MS sheet having hinge opening arrangement in front and back side and bottom frame made out of angle of size 50 x 50 x 6mm thick and 04 Nos legs 0.6 meter length with cable entry and exist circular hole with cable gland & gasket at bottom complete including painting to all internal and external exposed steel surfaces with power coating paint ( 5 stage process) with duly fixed in ground with necessary PC foundation (1:2:4) type B1, with danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs/glands for incoming and out going cables , bolts , screws ete complete all as specified and directed by Engr-in-charge and comprising of the following accessories. (Note : All the internal connection connected through suitable size of copper bus bar)..(a) Copper bus bar of suitable size for 500 Amp (TPN) including insulator.(b) 315 Amp, 4 Pole MCCB , 50 Hz ,415 V with rupturing capacity 50 KA - 01 No. (In coming).(c) Indicator lamp LED type (set of three Red,Yellow,Blue)----01 Nos.(d) Digital Multifunction meter, Model C, class 1, with relay - 01 No. Make AE/L&T/ABB/HPL.(e)100 Amp, 4 Pole MCCB , 50 Hz ,415 V with rupturing capacity 36 KA - 02 No. (f) 63 Amp, 4 Pole MCCB , 50 Hz ,415 V with rupturing capacity 36 KA - 01 No.

Supply installation, commissioning and testing including providing all necessary electrical connection, LT Junction box, outdoor type CPRI approved factory made out of 3.15 mm thick MS sheet of size 0.60mx 0.60 mx 0.60 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 Nos legs 1.0 meter length with cable entry and exit circular hole with cable gland & gasket at bottom including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete all as directed by the Engr-in-Charge and comprising of the following accessoriescomplete including following accessories :-(a) Copper bus bar suitable for 200 Amp fixing on suitable capacity and size insulators ---04 nos, (b) MCCB 100Amps, 4pole, 25KA -01No for incoming. (c) Indicator lamp LED type (set of three Red,Yellow,Blue) -01 set

STANDARD ELECTRIC WINDERS (BID ID -3150209)

FREEZCON (BID ID -3151209)

R D Enterprises (BID ID -3151524)

MAZUMDAR ENTERPRISE (BID ID -3150245)

M/s GANDHESWAR PHUKAN (BID ID -3151826)

Bimal Trading Company (BID ID -3151459)

NChetia and Sons Trading (BID ID -3152111)

M/s. R. K. Trading Company (BID ID -3152273)