GE/ALP (8272B) KOLKATA OF 2023-24

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and directed.

Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land) complete all as specified and directed.

Dismantiling of asbestos cement ( Corrugated or semicorrugated, etc ) sheet in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and directed.

Dismantling wrought iron or mild steel works of any description not otherwise provided for complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each and removing from site complete all as specified and directed.

S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews all as specified and directed.

S&F for MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc (upto four storiey bldg) all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide but not exc 1.5 mtr deep for foundation in soft/loose soil & getting out complete all as specified and directed.

M&Lfor cement concret(1:4:8),type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan or any radius in half brick work built in CM 1:4 complete all as specified and directed.

Material & labour for rendering 15mm thick in CM (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth (upto four storie bldg) complete all as specified and directed.

Material & labour for 15 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces (upto four storey high bldg) complete all as specified and directed.

M&L for damp proof coarse 25mm thick PCC(1:2:4) type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 ,type D-2 (using 40mm graded stone aggregate) as in sub base all as specified and directed.

M&L for 25mm thick PCC 1:2:4 ,type B-1 (using 20mm graded stone aggregate) as in bedding of tiles/kota complete all as specified and directed.

Supply and fixing powder coated aluminium sliding windows/ Ventilator sliding on 3 tire frame of section 92mmX30mm X1.55mm and shutters of section 20mm X40mm X1.55mm fixed with 5mm thick coloured sheet glass/wiremesh with rubber gasket , handel lock, 'U' channel with including with all fittings etc all as specified and directed.

Material and labour for glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed..

Material and labour for non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and directed.

Supply and fixing in repair 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and directed .

Supply and fixing in repair for 15mm bore stop valve, concealed type brass chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe complete all as specified and directed.

Supply and fixing in repair for 15mm bore chromium plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair brass chromium plated shower rose 125 mm size including fixing to steel pipe or union complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling all as specified and directed .

M&L for hanger 6mm dia GI (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flate 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

M&L for 12mm thick prelaminated parricle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed.

supply and fixing in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan ( padestal pattern) including PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. comlete all as specified and directed.

S&F in repair 15 mm bore brass CP health faucet screwed down for iron pipe and fixed all as specified and directed.

s & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed

supply and fixing in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm including CP waste coupling 32mm dia excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F f in repair brass CP mixer valve cock for mixing hot & cold water screwed down for iron pipe 15 mm dia including telephone shower all as directed and specified .

S&F in repair vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass scews, ponting around urinal back in cement; including connection to flushing pipe and outgoing pipes all as specified and directed.

S&F for 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified and directed.

supply and fixing in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and directed.

S&F for 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed including taking down existing water tanks and removinging to store complete all as specified and diredted.

S&F for water tank lid for 500/1000 Ltrs capacity PVC tank complete all as specified and diredted.

S&F for 20 mm dia gun- metal, globe or gate valves with iron wheel head,screwd both ends for iron pipe and fixed complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distember over a coat of primer complete all as specified and directed.

Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer (upto four storey bldg) complete all as specified and directed.

M & L for 75 mm thick type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels complete all as specified and directed.

Preparation of new surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

S&F for 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

S&F for 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed .

S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) complete all as specified and directed.

S&F in repairs CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and directed.

M&L for 20 mm thick machine cut cuddapa stone slab over cement screed base laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M&L for Granite slab 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms over screed bed/plaster 15 mm thick in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F for solid PVC moulded door frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. square tube, fixing in opening as per specification & drawing complete all as specified and directed. (upto 04 storey of building)

S&F for factory made solid panel PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supply and fixing in frame

Supply & fix for 100mm long butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

Supply & fix for 150 mm long aluminium anodised , barrel tower bolts of extruded section complete all as specified and directed.

Supply & fix for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F for 300mm aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section ot cast aluminium alloy and fixed length of bolt

Demoiltion and breaking up 150mm dia drain pipes (saltglazed, stoneware , AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes complete all as specified and directed.

M&L for 150 SGSW drain pipes laid in trenches and jointed after they are laid and tested as specified complete all as specified and directed.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil complete all as specified and directed.

Removing exavated soil n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for precast cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate ) as in cover slab, shelves, and similar work set in CM (1:4).complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for Mild steel TMT bars 8mm dia cut to length, including cranking,bending etc and binding with mild steel wire(annealed) not less than 0.9mm dia

M&L for Mild steel TMT bars 8mm dia as in stirrups cut to length, including cranking,bending etc and binding with mild steel wire(annealed) not less than 0.9mm dia but

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter .

m & L for use and waist form work to sides of pillars posts columns footing etc complete all as specified and directed.

M&L for RCC (1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in foundations,including rafts,footings,foundation beam, bases of column under reamed pile and mass concreten walls,beams and columns etc

S & F for MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed bothends,each screwed end to be fitted with washers and one hexagonal or square nut,but lenth of bolt exc 22.5 cm but n exc 30 cm &20mm dia complete all as specified and directed.

S&F for MS Plates (plaines or chequered) square cut or notched (forming holes with riveted,bolted attechment) 300x300x8 at bottom & 200x200x8 at top GDE Fe 410-S complete all as specified and directed.

S&F for steel work in tabular truss and tubular post including special shaped washer etc .complete using ERW or induction butt welded tubes conforming IS:1161-1979 grade St-240

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet manglore tile pattern 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified.

All as per item No 18 above but over 10 mm thick plater in CM 1:6 complete all as specified.

M&L for broken stone boulders hard core, broken to gauge n. exc 63 mm,deposited,spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete.

M&L for 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base all as specified and directed.

M&L for 50mm thick sand cushion under layer of floor all as specified and directed

Material and Labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed.

M&L for providing factory made 75 mm thick precast RCC cover slab of 3 MT load bearing capacity confirming to IS : 12592 (Grade M-30) complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (upto four storey bldg) complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Dismantiling of plain or Corrugated,semi corrugated, etc) steel sheet any guage, thickness including Nainital or similar pattern in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and directed.

M&L for PCC 1:3:6 ,type C-2 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span,cills,steps,railing upto 60 cm in height,coping,including weathering,slightly rounded or chamfered angles and throating all as specified and directed.

M & L for 75 mm thick type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels complete all as specified and directed.

M & L for coloured glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

Material & labour for framed work for ornamental and intricate design such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-16.

M&L for coloured rubber polished chequered tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick , over and including 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.50cu.m getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard dense soil complete all as specified.

Materials and labour for preparation of new plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and directed.

M&L for providing cement concrete type B-1,1:2:4 (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and directed.

S&F for steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss,purlins, rafter etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed.

S & F for 11-15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed.

Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and as directed by the Engr-in-Charge.

S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including aluminum chequered grill with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.

Supply and fixing for Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for 30mm thick factory made flush door shutters solid core construction with block board core and plywood face panels commercial type on both faces etc complete all as specified and as directed by Engr-in-Charge.

S&F for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge.

S&F for 150mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm with grid of 500mm interval on both horizontal and vertical direction, fixing of capping/fillets over the paneling at top, bottom and junctions wherever require at site etc complete all as per specified and directed.

M&L for 5mm thick rendering in CM (1:3) on concrete surfaces as in ceiling and finishing the surfaces even and smooth with out using extra cement. complete all as specified and as directed by the Engr-in-Charge.

M&L for two coat acylic distemper over a coat of wall care putty on new plastered surfaces preparatory to distemper incl preparation of wall surfaces complete all as specified and directed.

M&L preparation of new plastered surface and applying three coats of white wash on ceiling all complete in all respect as specified.

Complete removal of old surface applying two coats of OBD over a coat of primer over a layer of wall care putty

M&L for applying One coat of acrylic distemper over old decorated plastered or unplastered surfaces of wall, pillasters, cornices including preparation of old surfaces etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and directed.

M&L as in repair / replacement for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylum/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 10 above but for 5 Amps socket on same board complete all as specified and directed.

All as per item No. 10 above but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S & F for ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.

S & F for piano switch flush type single pole one way 5 Amps, 230 V.

S & F for socket outlet 2 in 1, 3 pin, 6A

S & F for socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type

S & F for switch piano flush type, single pole one way 15 Amps, 230 V.

M & L for making the hole for fixing the exhaust fan of size 250 mm all as directed.

S & F for exhaust fan PVC body of size 250 mm heavy duty of single phase complete all as specified and directed.

Taking the existing tube light fitting and fixing the same after completion of B/R and E/M works complete all as specified and directed.

S&F for LED tube light fitting 2 ft 10 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed.

Material and labour for circuit/sub-main wiring (surface type) with two runs of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC concealed conduit complete all as specified and as directed. (i) Three runs of 4.0 Sqmm cable and on run PVC conduit shall measured as one length.

Supply and fixing for MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : C&S /Legrand/ Havells/L&T.

Supply and fixing for MCB 6 to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : C&S /Legrand/ Havells/L&T.

Supply and fix for SPN MCB DB 4 way with 200 Amps rated bus bar, neutral link, dinrail suitable for mounting MCB's 240 volts double door type as in repair of busbar for distribution of power and light circuit including taking down old bus bar box and making good the disturbed surface complete all as specified and directed . Make : ABB /Legrand/ Havells/L&T/Schineider.

S & F for modular type switch, one way 6 Amps , 1 module complete Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular type socket 5 pin, 6 Amps 2 module complete .Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular type socket 5 pin, 16 Amps 2 module complete Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular type switch, one way 16 Amps, 1 module completeMake:-Legrand/Anchor(Roma)/Crabtree

S & F for modular type fan regulator step type(2 module)120 Watt.Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular type5 Aamp bell push switch.Legrand/Havells/Crabtree/Anchor

M&L for modular cloured/white cover plate with frame 2 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular cloured/white cover plate with frame 3 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular cloured/white cover plate with frame 6 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular white Cloured/cover plate with frame 8 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular white cloured/cover plate with frame 12 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular metal flush box 1 / 2 module including taking down of old one complete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular metal flush box 3 module including taking down of old onecomplete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular metal flush box 6 module including taking down of old one complete all as specified and directed. Make:-Legrand/Havells/Crabtree/Anchor

S & F for modular metal flush box 8 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular metal flush box 12 module complete all as specified and directed . Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular type 32 A motor starters (for AC) white clour, Make crabtree/Havells/Legrand/North west/Anchor(ROMA)

Supply and fix for SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

S & F for modular type mini MCB 32 Amp SP C Series 3 KA white clour,

S & F for modular type 32 A Motor starters white clour

S & F for modular type 10/25 A 3 Pin Shuttered Socket white clour

S&F for 25 A 3 pin plug top

Supply and fix for SPN MCB DB 4 way with 200 Amps rated bus bar, neutral link, dinrail suitable for mounting MCB's 240 volts double door type as in repair of Busbar for distribution of power and light circuit including taking down old bus bar box and making good the disturbed surface complete all as specified and directed . Make : ABB /Legrand/ Havells/L&T/Schineider.

Supply and fixing for MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.

Supply and fixing for MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : C&S /Legrand/ Havells/L&T.

S & F for blanking Plate for MCB DB complete all as apecified and directed .

Supply, installation and testing and commissioning of 20 KVA online UPS, input voltage 415 VAC+ 15%, frequency-50 HZ+10%, PF-0.99, output voltage-THD-100% linear load<3%, Non linear load<5%, crest factor 3:01, overload capacity-110% overload capacity for 10 minutes, transfer time to by pass-sychornized : 0 millisecond, unsynchronized : 20 millisecond. Battery must be of 30 minutes backup in full load, VAH should be more than 1600 VAH (12V, 42 Amp-32 Nos), SMF, VRLA type with battery charger, FCC standards –FCC 47 CFR Part 15B, ANSI C63.4:2014, CE certificate as per IEC 62040-1 & IEC 62040-2, IEC 62040-2, IEC 62040-2 standards complete all as specified and as directed. UPS make : Schneider (APC)/Prostarm/Vertiv/Microsofte. Battery Make : Exide/Quanta/Lumunous Note : provide 2 years warrenty for UPS and 2 years of Batteries.

M&L for 35 sqmm 3.5 core XLPE . insulated , armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, in trenches/fixed on wall with supporting insulators/saddles etc complete all as specified and and directed.

HYDROTEC

MARUTI ENTERPRISES

DGR CONSTRUCTION