PERIODICAL MAINTENANCE WITH ESSENTIAL REPAIRS AND RESCUE OPERATION OF PASSENGER LIFTS INSTALLED AT 84 LEADING SAILORS ACCN AND MARRIED OFFICER ACCN (ALKA, ARCHANA, ARADHANA, BRAHMAPUTRA, BETWA AND BEAS) UNDER GE NW KARANJA

Amount

SCHEDULE 'A' PART-I (PERIODICAL MAINT) Periodical repairs/ maintenance of fortnightly, monthly, quarterly (as per routine), daily cleaning of lift cabin with anty bacterial solution including attending lift in case of emergency for a period of one month for one No “Monarch Enterprises” make automatic electric lift service of 08 passenger (544 kgs) capacity with automatic sliding door to serve ground plus six upper floors (Total seven openings) with a speed of 01 Meter /second including replacement of oil and minor spares like nuts, bolts, control wires, COP's unserviceable buttons, small switches, level switches, landing door lock contacts, landing door springs, door gibbs, door belts, LED down lights any watts and thimbals etc, as required for uninterrupted smooth functioning of lift and other items not covered under items of this schedule A Part -III for lift installed at Archana building complete all as specified and as directed by Engr-in-charge.

All as per item No.01 here-in-before but at Alka building.

All as per item No.01 here-in-before but at Aradhana building.

Periodical repairs/ maintenance of fornightly, monthly, quarterly (as per routine), daily cleaning of lift cabin with anty bacterial solution including attending lift in case of emergency for a period of one month for one No “ Monarch Enterprises” make automatic electric lift serve of 13 passenger (884 Kgs) capacity with automatic sliding door to serve ground plus six upper floors (Total seven openings) with a speed of 01 Meter/ Second including replacement of oil and minor spares like nuts, bolts, control wires, COP's unserviceable buttons, small switches, level switches, landing door lock contacts, landing door springs, door gibbs, door belts, LED down lights any watts and thimbals etc, as required for uninterrupted smooth functioning of lift and other items not covered under items of this schedule A Part -III for lift installed at Bramhaputra building complete all as specified and as directed by Engr-in-charge.

All as per item No.04 here-in-before but at Betwa building.

All as per item No.04 here-in-before but at Beas building.

Periodical repairs/ maintenance of fortnightly, monthly, quarterly (as per routine) including attending lift in case of emergency for a period of one month for one No “ Monarch Enterprises” make automatic electric lift service of 08 passenger (544 kgs) capacity with automatic sliding door to serve ground plus five upper floors (Total six openings) with a speed of 01 Meter/ second including replacement of oil and minor spares like nuts, bolts, control wires, COP's unserviceable buttons, small switches, level switches, landing door lock contacts, landing door springs, door gibbs, door belts, LED down lights any watts and thimbals etc, as required for uninterrupted smooth functioning of lift and other items not covered under items of this schedule A Part -III for lift installed at Bramhaputra building complete all as specified and as directed by Engr-in-charge.

All as per item No.07 here-in-before but at Betwa building.

All as per item No.07 here-in-before but at Beas building. Notes for item No. 01 to 09: (i) The details of maintenance to be carried out during daily /fortnightly /monthly /quarterly / half yearly /yearly. Log sheet of the maintenance will be submitted by the contractor on monthly basis duly signed by service engineer and contractor. Format of logsheet will be approved by Engineer-in-charge. (ii) The rate quoted is inclusive of the cost of all kind of checking and for earth resistance test. (iii) The rate quoted is inclusive of repairs /replacing of earthing system as required on ground. (iv) The rate quoted is inclusive of the cost of components generally changed due to wear and tear and not considered under Sch A part III, such as parts of electronic control panel's power contactor, break shoe liner, cables for inter connections, springs, bearings, bushing, gibs, fuses, nuts and bolts etc., (v) The visit of executives/ experts be intimated well in advance so that periodical maintenance can be supervised, schedule of periodical maintenance (daily, fortnightly, monthly, quarterly, half yearly and annually) be submitted well in advance for approval by Engr-in-charge. (vi) The AMC should cover any/ all parts of lifts if its functions found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms. (vii) The contractor has to carry out the AMC of the lifts through OEM only. (viii) All maintenance should be carried out in presence of concerned JE E&M and OEM Authorised Lift engineer maintenance slip will be submitted accordigly. (ix) The rate quoted is inclusive of annual inspection of lift by PWD authorised lift inspector and the report should be submmited to GE office accordingly.

SCHEDULE 'A' PART-II (RESCUE OPERATION) Providing rescue operator for passenger lifts capacity 8 Nos of passengers (544 Kg) of Make: M/s Monarch Enterprises, installed at Archana building from 0600 hours to 1400 hours and 1400 hours to 2200 hours in two shifts of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lifts capacity 8 Nos of passengers (544 Kg) of Make: M/s Monarch Enterprises, installed at Alka building from 0600 hours to 1400 hours and 1400 hours to 2200 hours in two shifts of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lifts capacity 8 Nos of passengers (544 Kg) of Make: M/s Monarch Enterprises, installed at Aradhana building from 0600 hours to 1400 hours and 1400 hours to 2200 hours in two shifts of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lifts any capacity and Nos of Make: M/s Monarch Enterprises, installed at Archana, Alka and Aradhana building from 2200 hours to 0600 hours in one shift of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lifts capacity 8 Nos of passengers (544 Kg) and 13 Nos of passenger (884 Kg) of Make: M/s Monarch Enterprises, installed at Brahmputra building from 0600 hours to 1400 hours and 1400 hours to 2200 hours in two shifts of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lifts of capacity 8 Nos of passengers (544 Kg) and 13 Nos of passenger (884 Kg) of Make: M/s Monarch Enterprises, installed at Betwa building from 0600 hours to 1400 hours and 1400 hours to 2200 hours in two shifts of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator but for passenger lift of capacity 8 Nos of passengers (544 Kg) and 13 Nos of passenger (884 Kg) of Make: M/s Monarch Enterprises, installed at Beas building from 0600 hours to 1400 hours and 1400 hours to 2200 hours in two shifts of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lift any capacity and Nos installed at Bramhaputra building from 2200 hours to 0600 hours in one shift of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lift any capacity and Nos installed at Betwa building from 2200 hours to 0600 hours in one shift of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge.

Providing rescue operator for passenger lift any capacity and Nos installed at Beas building from 2200 hours to 0600 hours in one shift of 08 hours each per day, including sunday and holidays all as per latest applicable lift rules complete all as specified and as directed by Engr-in-charge. Notes for item Nos. 10 to 19: (i) The lift rescuer (operator) shall be Matriculate with sufficient experience (not less than 05 years). The lift rescuer (operator) should be capable to rectify both mechanical as well as electrical defects for smooth functioning of lifts. (ii) It is responsibility of contractor to provide a reliever to the rescuer (operator). So that lift rescuer (operator) is available all time during operation period for uninterrupted functioning of lift. (iii) The contractor/ service providing agency will be required to provide two set of uniform to all lift operator with name and firm tag. (iv) Man power list with aadhar linked bank account number, qualification certificate and EPF documents will be submitted prior to commencement of Rescue Operation for necessary sanction from GE. (v) The contractor/ service providing agency shall be wholly and exclusively responsible for payment of wages of persons engaged by it in compliance with all the statutory obligations under all related legislations as applicable to it from time to time including Minimum Wages Act, Employees Provident Fund Act, ESI Act, etc., and the GE. MES shall not incur any liability for any expenditure whatsoever on the persons employed by the contractor/ Agency on account of any obligation. The contractor/ service providing agency will be required to provide particulars of PF, Group Insurance of its Employees engaged by him to the GE beofre processing of RAR payment.

SCHEDULE 'A' PART-III (ESSENTIAL REPAIRS) Material and labour for rewinding of double speed electric motor 3 phase, 50 Hz, 415 Volts comprising of following capacity complete all as specified and as directed by Engr-in-charge. (i) Disconnecting and removing electric motor from installed position loading and unloading transporting to nearest workshop. (ii) Dismantling existiing burnt winding from motor, cleaning of rotter and rewinding complete with super enamelled copper winding wire of existing gauge including insulation material as required. (iii) Bringing back electric motor duly rewinding including loading and unloading transporting from workshop to site of work including electric connection, commissioning and testing in actual working condition for 8 hrs continuously to check RPM, Ampere, load and overall performance. (iv) Replacement of ball bearing - 02 Nos for each motor as per existing size and make RPM. 15 HP Motor

Material and labour for replacement of thrust bearing of 15 HP motor complete all as specified and as directed by Engr-in-charge.

Material and labour for replacement of pedestal bearing with block of 15 HP motor complete all as specified and as directed by Engr-in-charge.

Material and labour for replacement of end/ side bearing of 15 HP motor complete all as specified and as directed by Engr-in-charge.

Material and labour for replacement of warm shaft housing bush and oil seal for 10 HP motor complete all as specified and as directed by Engr-in-charge.

Material and labour for replacement of brake liner for 10 HP motor complete all as specified and as directed by Engr-in-charge.

Material and labour for replacement of coupling bush rubber for 15 HP motor complete all as specified and as directed by Engr-in-charge.

Material and labour in repairs main hoist rope multistranded size 13mm dia heavy duty confirming to ISI standards complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs governer rope of dia 5/16mm multistranded of ISI make and pullies of suitable size complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair trailling cable flexible 12 core 0.75 sqmm copper cable 1100 volts grade complete all as specified and as directed by Engr-in-charge.

Disconnecting carefully and transporting to authorised workshop including loading and unloading and repair to Varriable Voltage Varriable Frequency drive (VVVF drive) by authorised mechanic includiing replacement of damaged parts /chips in the drive and again transports back to site of work reconnecting testing complete to the entire satisfaction of Engineer-in-charge complete all as specified and as directed by Engr-in-charge.

Disconnecting and taking out unserviceable COP assembly and supply, fixing and testing new car operating panel assembly complete with illuminated push button for floor position, alarm on stop, door close, door open, cabin fan, cabin light, etc., in and including direction indicator with 7 segment display with CPI card and stainless steel face plate, duly connecting with existing control and electric system etc., to serve G+06 floors for ECE make lifts complete all as specified and as directed by Engr-in-charge.

Removing and replacing the existing unserviceable LED display card and push button in call box complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs existing unserviceable infra red door protection edge/ sensor (Lambada) with latest new infra red door protection edge for full height of car door edge for 08/13 passenger or goods lifts complete all as specified and as directed by Engr-in-charge.

Material and labour in replacement for car door motor with movement wheel suitable for Monarch Enterprises make lift complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement door drive auto power, compact inverter, three phase 400 volts Model FRENIC - Mini series FRN0002 to 0011C2S-4 of make : Fuji Electric Co. Ltd or equivalent complete all as specified and as directed by Engr-in-charge.

Supply and fix car door operating rope made out of steel strands, 4mm thick having 25 strands thimble and length adjustable screw approx. 1.5m length complete all as specified and as directed by Engr-in-charge.

Material and labour in replacement for landing door seal suitable for Monarch Enterprises make lift complete all as specified and as directed by Engr-in-charge.

Material and labour in replacement for car door seal suitable for Monarch Enterprises make lift complete all as specified and as directed by Engr-in-charge.

Material and labour for repairs to ARD system of microprocessor card, IGBT card, including testing complete all as specified and as directed by Engr-in-charge.

Supply and fix for IGBT Card to ARD system including testing complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement 110 volts AC contractor 25 Amp/ 15 Amps ITH capacity suitable for NO /NC providing (Normal Open /Normal Close) operation of landing /Car door and providing auxilary electric supply to mother board complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement 440 volts, AC contactor 25 Amp/ 15 Amps ITH capacity, suitable for NO /NC providing (Normal Open /Normal Close) operation of landing /Car door and providing auxilary electric supply to mother board complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair rechargeable, maintenance free lead acid batteries of 12 Volt, 17 AH for ARD system complete all as specified and as directed by Engr-in-charge.

Supply and fix for break coil copper winding, 110 Volt DC permanent mounting break coil as per existing guage super enamelled copper wire complete all as specified and as directed by Engr-in-charge.

Material and labour in replacement electric hooter 230 V 50 HZ siren type complete all as specified and as directed by Engr-in-charge.

Material and labour in replacement blower fan suitable for 8/13 passenger lift complete all as specified and as directed by Engr-in-charge.

Escon Elevators Pvt Ltd

Veer High Tech Solution

shakti engineering and electrical works