Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.5 L
EMD Value
₹4,942
Closing Date
15 Oct 2026, 12:00 pm5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
AE, KWSD-I
N.S.Building
Withdrawing, supply, installation and surging of 3 HP Submersible pump motor set (01 no) with allied works into the premises of Paschim Banga Natya Akademi, 1by1, A.J.C. Bose Road, Kolkata-700020 during the year 2026-27
2026_WBPWD_5078194_2
WBPWD/KWSD-I/AE/eNIT-19/26-27
Open Tender
CIVIL WORKS
Percentage
10 days
Paschim Banga Natya Akademi
Please refer Tender documents.
4 documents required · 4 mandatory
₹4,942
Yes
7 Oct 2026
7 Oct 2026
27 Oct 2026
8 Oct 2026
15 Oct 2026
8 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-Charge. | 24 | Hour | 1,085.05 | ₹26,041.2 |
| 2 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
50 mm dia nominal bore | 24 | Mtr. | 762.15 | ₹18,291.6 |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
25 mm nominal dia Pipes | 60 | Mtr. | 627.25 | ₹37,635 |
| 4 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
50 mm nominal bore | 2 | Each. | 1,026.65 | ₹2,053.3 |
| 5 | Withdrawing the 3 HP submersible pump motor set with existing column pipe from the tube well with special type of tools and tackles and chain pully block.
(Non-Scheduled Item) | 1 | Set | 7,594 | ₹7,594 |
| 6 | Installtion the Repair / New Submersible pump motor set with column pipe and special types of tools and tackles and chain pully block etc.
(Non-Scheduled Item) | 1 | Set | 7,594 | ₹7,594 |
| 7 | Supply 3 HP six stage submersible pump motor set 415V, 2850 RPM, Kirloskar/KSB/ equivalent make.
(Non-Scheduled Item) | 1 | Set | 39,157 | ₹39,157 |
| 8 | Jointing the tailing cable and proper vulcanizing, dressing and testing.
(Non-Scheduled Item) | 12 | Point | 158 | ₹1,896 |
| 9 | S/F 3 core flat submersible cable of 4.0 sqmm finolex make IS694 1100Volt. (6 Way x 15 )= 90
(Non-Scheduled Item) | 88 | Mtr. | 248 | ₹21,824 |
| 10 | S/F Motor Body clamp 12 inch long ( 9 inch with 2 nos nut bolt and washer)
(Non-Scheduled Item) | 8 | Set | 1,292 | ₹10,336 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
2911.pdf
Tender Documents • 1.86 MB
BOQ_5177622.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .