Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC 11 1 7 P D KYDGANJ PRAYAGRAJ U P PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹43.1 L+₹8.2 L (23.5%)Rejected-Finance 0 CIVIL LINES TETARI BAZAR TETARI BAZAR NAUGARH SIDDHARTHNAGAR UTTAR PRADESH 272207 | SIDDHARTH NAGAR | UTTAR PRADESH | 272207 | L2 | Rejected-Finance Other than lowest | |
| 3 | Rejected-Technical BR GADGIL ROAD PUNE MAHARASHTRA 411030 INDIA | PUNE | MAHARASHTRA | 411030 | - | Rejected-Technical Being notfull the criteria as per NIT |
Tender Value
₹47.7 L
EMD Value
₹95,400
Closing Date
7 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) GORAKHPUR
GE(AF) GORAKHPUR
ADDN ALTN OF KITCHEN IN DUS AT OFFICERS ENCLAVE SPL REP TO BILLETS PROVN OF WOODEN DOORS AND SPL REP TO LT POWER SUPPLY AT 4 AFSB VARANASI UNDER GE AF GORAKHPUR
2023_MES_579604_1
9001/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) GORAKHPUR
Class D cat a i
8 documents required · 8 mandatory
₹500
Yes
GE(AF) GORAKHPUR
₹95,400
Yes
31 Mar 2023
8 Feb 2023
9 Mar 2023
8 Feb 2023
7 Mar 2023
22 Feb 2023
8 Feb 2023 - 16 Feb 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .
Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Dismantling stone slab & tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed. Complete all specified and directed
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed at site.
Demolition of reinforced cement concrete on any description and in any position not otherwise specifically provided for complete all as specified and directed at site.
Demolition of Brickwork or stone/boulder masonry built in cement mortar.complete all as specified and directed at site.
Taking down old sink with draining board and fixing new stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1140X500mm and bowl size 500x400x160mm complete all as directed . Make- Nirali or equivalent.complete all as specified and directed at site.
S&F 50 mm bore low density polyethylene (LDPE) pipes of pressure rating 6KgF/Sqcm fixied to complete to walls,ceiling or in floors etc.complete all as specified and directed at site.
M&L for 32mm waste fittings, brass, chromium plated for glazed ware sink, basing etc with long screwed shanks and fly nuts, flanges end bedded in red lead cement and other end fixed.complete all as specified and directed at site.
Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing all as specified and directed.
Re-Fixing, 15 mm bore old steel water tubing with all fittings such as bends, tee, nipples , elbow , reducers, etc., fixed complete to walls and ceilings or laid in floors all as specified and directed.
S&F steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.
Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing all as specified and directed.
Re-Fixing, 20 mm bore old steel water tubing with all fittings such as bends, tee, nipples , elbow , reducers, etc., fixed complete to walls and ceilings or laid in floors all as specified and directed.
S&F steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.
M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement .complete all as specified and directed.
M&L Rendering 5mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified as directed.
M&L for two coat of oil bound distemper on walls over one coat of 1mm thick wall care putty after complete preparation on new plastered surfaces of walls.
M&L for two coats of oil bound distemper on ceiling surfaces over a coat of primer over 3mm thick wall care putty, complete all as specified and directed.
M&L washing, rubbing down and stopping of distempered and painted surfaces of walls including cornices etc and applying one coat of oil bound distemper white or tinted complete all as specified and as directed.
All as per item No 20 here in above but one coat of oil bound distemper on ceiling surface complete all as specified and as directed.
M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
S&F in repairs concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed. Make- Essco or equivalent complete all as specified and directed at site.
S&F in repairs stop valve 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed. Make -Essco or equivalent.
S&F in repairs stop valve 20 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed. Make -Essco or equivalent.
Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe. Compelte all as specified and directed. Make- Essco or equivalent
Supply and fix in repairs 15 mm bore angle cock (Two-in-way) brass chromium plated fancy type, screwed for iron pipe. All as specified and directed. Make- Essco or equivalent
S & F 32mm Dia and 60 to 75 cm long PVC waste pipe with fly nut, coupling for sinks/urinals or wash basins etc.
M&L for Granite (of any type) 18 to 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing rounded edgs laid over & including15 mm thick screed bed in cm 1:6 etc complete all as specified as directed.
All as per item No 29 here in above but in skirting/dado over 10 mm thick cement morter in 1:3.complete all as specified and directed at site.
Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.
M&L Glazed ceramic colour tiles in vertical surfaces of size 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat of 10 mm thick cement mortar 1:3.complete all as specified and directed at site.
S&F joint free Non skid colour Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement mortar 1:6 bedding.complete all as specified and directed at site.
M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polised area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15 mm thick screed bed in cement mortar 1:6 etc. complete all as specified and directed.
S&F in repair CP Grating 125 mm size complete all as specified as directed.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq.m but n.exc 2 sqm each complete all as specified and directed.
Resecuring or easing & adjusting with taking down shutters of any description exc 1 sq.m but n.exc 2 sqm each complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap 75mm , plain with grating including jointing with solvent cemen, Complete all as specified and directed.
S&F 18 mm thick HDHMR (High density high moisture resistance) board of grade1 quality make:Green Ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finsih mica of appoved quality make:- Century or as approved by GE Fixed with screws, slovent cement/adhesive to make Bar counter, cupboard shutters, sides, top, bottom, shelves inside the cabinet shutter or drawer. Complete all as specified and directed.
S&F 18 mm thick HDHMR (High density high moisture resistance) board of grade1 quality make:Green Ply, Action Tesa or other make as approved by GE of one side prelem and other side to suitable for high gloss finsih mica of appoved quality make:- Century or as approved by GE and supporting the shelf/partition and shall provide with PVC runners in three sides of shelf size 18x18mm as per required length. The front side of the edge visible in the front of the shelf/partition to be edgelipped by 18mm with 1 mm thick PVC sheet of density 600 kg/Cum density manufactured by an ISO-9000 certified company, using solvent cement etc complete all as specified and directed.
S&F 75 mm size L/Z type stainless steel butt hinges fixed with screws openable at 110 degree for cabinet shutter Make- KAFF complete all as specified.
S&F stainless steel handles of 200 mm size for Almirah shutter complete all as specified.
S&F Soft closing 110mm Full overlay slide on hinges Make Sleek/Asian paint code-HIHG4079 83024900 1W 4H 3D or equivlent.
S&F SS Designer Thali/Plate Comb of size 380x400x200mm make of Sleek (code-ASSTT380405200) or equivlent. Complete all as specified and directed.
S&F SS Designer Cup and Saucer Basket of size 380x400x100mm make of Sleek (code-ASSTT380405100) or equivlent. Complete all as specified and directed.
S&F SS Perforated Curtlery Basket of size 380x500x100mm make of Sleek (code-ASSTT380500100) or equivlent. Complete all as specified and directed.
S&F SS designer Basket of size 380x400x200mm make of Sleek (code-ASSTT380500100) or equivlent. Complete all as specified and directed.
S&F SS Grain Basket Trolley with bracket of size 360x505x230mm make of Sleek (code-ASSGBT360505230) or equivlent. Complete all as specified and directed.
S&F SS Dustbin-14 Ltrs, Shutter mounting, of size 270x325 Make:Sleek Code No- HISG2154, and equivlent. Complete all as specified and directed.
S&F stainless steel handles of 170 mm size for kitchen cabinet shutter/drawer. Complete all as specified.
S&F CP SS teliscopic channel 12" long, zink (35Kg) make- Sleek (Asian paint) code-HICH- 1356) or equivlents. complete all as specified.
S&F CP SS teliscopic channel 20" long, zink (35Kg) make- Sleek (Asian paint) code-HICH- 1356) or equivlents. complete all as specified.
S&F in repairs SS Plate rack of size 605x255x100mm make- Sleek (Asian paint) (code-ASSTGPR605255100) or equivlents. Including dismantling of old steel plate rack. Complete all as specified.
M&L Brick work with subclass 'B' bricks,straight or curved on plan exc 6m mean radius, built in CM 1:6.Complete all as specified and directed.
M&L for cement concrete 100 mm thick, type B-2, 1:2:4 (40 mm graded aggregate) as in floor.Complete all as specified and directed.
S&F in repairs Rotational moulded polyethylene 1000 Ltr water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S&F 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed at site.
S&F 15mm Cromium plated nozzale for Aquaguard connection.Complete all as specified and directed.
S&F in repairs PVC toilet cabinet, with shutters having mirror on shutter of size 45 cm(wd) x 50.50 cm (ht) x 15cm complete all as specified and directed at site.Make - Nilkamal/Prayag /Shakti
M&L for 40mm thick cement concrte type B-1, 1:2:4 (20mm graded aggregate) as in floor finishes. Complete all as specified and directed.
Taking down chowkhat or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from frames) and removing to MES store. Complete all as specified and directed.
M&L PCC (1:2:4) 20 mm graded aggregate type B1 as in holdfast block, coping, bedblock etc.complete all as specified and directed.
M&L for second class hard wood plain, solid, chowkhats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
M&L Flush shutters, 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
S&F for 300mm long Brass, sliding door bolt with sand or diecast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fix. Complete all as specified and directed.
S&F for 100mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11. Complete all as specified and directed.
S&F 300mm, Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.complete all as specified and directed at site.
S&F 150 mm Brass handles, cast type, polished bright. Complete all as specified and directed.
S&F aluminium (extruded section) door closer hydraulically regulated designation no 3 universal type suitable for 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed.
S&F hold fasts 25mm X 3mm thick , 30 cm long and similar small articles, complete all as specified and directed. complete all as specified as directed.
Supply and fix brass 100mm size motrice lock, 4 levers ,vertical type.complete all as specified and directed at site.
S&F 150mm floor door stopper of brass body and tongue with hard drawn steel spring.complete all as specified and directed at site.
M&L preparing new surfaces of wood, treating ends of posts, backs of chowkhats etc area tarred exc 0.1 sqm but n exc o.5 sqm and treated with one coat of tar or coal tar black paint as specified and directed.
S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge block, shaped door and window stops and the like incl all necessary labours, articles n exc 200 cum each complete all as specified and directed.
Preparing new wooden surface and applying two coats of synthetic Varnishing over a coat wood filler liquid transparent with oil staining of any description exc 10 cm width or girth.Complete all as specified and directed.
Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer on small article such as brackets etc. n exc 0.1 sq.m each .
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.
M&L for Cement concrete Type D2, 1:4:8, (40 mm graded aggregate) in foundations,filling and mass concrete.complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. All as specified and directed.
S&F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length ie within 20 mm of the length indicated ) grade Fe 410-W (Gde E- 250) quality A.
S&F 0.63mm Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) as in wicket gate. Complete all as specified and directed.
Providing precast cement concrete louvres and jallies,Type B0, 12.5mm graded aggregate set in cement mortar 1:4, 25mm thick (measured solid), including all mouldings but excluding frame. Complete all as specified and directed.
M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise decribed over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed.
Extra for forming fair finished drain or channel 80 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed at site.
S&F in repairs PVC (SWR) pipes 110mm,single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed.
M&L for Cement concrete Type C2 1:3:6 (40mm graded aggregate) as in surface channels and drains . Complete all as specified and directed.
M&L for preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer. Complete all as specified and directed.
Surface dressing n exc. 15 cm deep in soft/loose soil. Complete all as specified and dircted.
M&L for Hard core of broken brick gauge exc 63mm but n.exc 100m, deposited, spread and levelled in layer n.exc 15cm thick, watered and rolled /ammed to a true layer.complete all as specified and directed at site.
M&L for Cement concrete Type D2, 1:4:8, (40 mm graded aggregate) in foundations,filling and mass concrete.complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.complete all as specified and directed at site.
M&L for cement concrete Type B1 1:2:4 as in sides of interlocking tiles.Complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (Light,fan,socket are power) complete fitting such as switches, ceiling rose, regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. all as specified and directed.
M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.
All as per item No 94 above but by using PVC casing & caping of size not less than 25 mm width and fixing arrengements as required at site and directed by Engr-in-Charge.
All as per item No 94 above but one 3/5 pin socket out let 5 amp on same board with other switches.
All as per item No 94 above but socket 5 amp on independent board.
All as per item No 94 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size
All as per item No 94 above but one light point controlled by two two way switches.
All as per item No 94 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board.
Supply & Fixing switch modular single pole, one way 6 Amp ,01 module.
Supply & Fixing switch modular , two way 6 Amp ,01 module.
Supply & Fixing switch modular bell push 6 Amp ,01 module.
Supply & Fixing switch modular single pole, one way 16 Amp ,01 module.
Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module.
Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module.
Supply & Fixing call bell Ding Dong AC. 230 volts, single pole.
S&F Modular electronic type step fan regulator, 120 W-2 module.
Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete.
Supply & Fixing lamp holder PVC / Ploycarbonate modular type.
Suply and fixing in repairs engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white / warm white as required ,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 36 W.Make Philips/Bajaj/Crompton.
All as above item No 111 but of 24 W .Make Philips/Bajaj/Crompton.
All as above item No 111 but of 09 W .Make Philips/Bajaj/Crompton.
Supply and fixing in replacement integral LED light fitting, 15 W/18W, 230 Volts, decorative surface mounted round / Square shaped (down lighter) , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size.Make BAJAJ / Philips/CG.
Supply and fixing in replacement integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size. Make Philips / Bajaj / Crompton / Havells.
Supply & Fixing in replacement LED lamp 09 Watt .
Taking down carefully copper/aluminium power/sub main wiring of any size / type all as specified and directed.
M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 4.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 4.0 Sq mm copper conductor shall be measured as one unit length.)
M & L for power/sub main wiring with two runs of single core 4 sqmm size and one run of single core 2.5 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC conduit complete all as specified and directed.( Note - two runs of 4 sq mm single core copper conductor and one runs of 2.5 Sq mm copper conductor shall be measured as one unit length.)
Supply & fixing earth plug enclosure (plug and socket ) with MCB, SP 20 Amps.
Supply & Fixing in repairs sheet metal enclouser MCCB DB IP 43 double door bus bar neutral link earth bar and din rail TPN 4 way make MDS Legrand cat No 607790 or equivelent in Havells / HPL / ABB.
Supply & Fixing in repairs sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 12 way.
Supply & Fixing in repairs sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way.
Supply & Fixing in repairs sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail TPN 4 way.
S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,100 Amps with breaking capacity 16 KA fixed type all as specified and directed.
Supply & Fixing MCB TPN 16 to 32 Amps 415 volts, 10KA "C" curve.
Supply & Fixing in repairs MCB SPN 32 Amps 240 volts, 10 KA, "C" curve.
Supply & Fixing in repairs MCB SPN 40 to 63 Amps 240 volts, 10 KA, "C" curve.
Supply & Fixing in repairs MCB SP 5 to 32 Amps 240 volts, 10 KA, "C" curve.
Supply & fix fans ceiling having copper winding motor ,complete with electronic type regulator and accessories 230 V,50 Hz AC ,1200 mm sweep. BEE 5 star rated.Make Bajaj Model Elegance 1200 mm or equivalent model of make specified in particular specifications.
Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioning . Make Bajaj Model Supreme plus or equivalent model of make specified particular specifications.
Supply & Fixing wall mounting fan complete steel body and copper winding fan motor 400 mm sweep, 230 V AC,including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make: Bajaj / Havells/CG.
Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm to 120 Sq mm 2 /3.5 /4 Core. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )
Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 120 sqmm 3.5 core.
All as per item No134 above but size 35 sq mm 3.5 core.
All as per item No 134 above but size 16 sq mm 4.0 core.
All as per item No 134 above but size 10 Sqmm 4 core.
All as per item No 134 above but size 10 Sqmm 2 core.
Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.
Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.
Returning filling in including spreading leveling watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.
Labour for boring, holes for inserting of 40/50 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deep complete all as specified and ditected.
M & L in repairs GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
M & L in repairs GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
Supply and fix in replacement FRP , hot press moulded SMC pole box 295X255X120 mm comprising of 100 Ams aluminium bus bar 4 strips ( IP 55 protection ) with one MCB SPN 20 Ams to be fixed inside the box and box will be clamped bottom of the pole with FI clamps (duly painted ) nut bolt washers of required size.Make - SINTEX ,Model GSJB-2520 or any other sample approved by GE.
Supply, install, connect & testing in repairs cubical outdoor type factory made double door , powder coated LT bus bar feeder pillar box having alluminium bus bar suitable for 200 amps 3 phase and neutral arrangement of size 500mm x 500mm x 200mm with MCCB 4 pole 100 A as incoming including provision of LED Indicating lamps (RYB) 01 set of 3. complete weather proof and vermin proof conforming to IP-54 made out of 3.15 mm thick CRCA sheet including provisions for ventilation and cable termination alley & two Nos suitable size of aluminum strip for body earthing all as per IS. It should be mounted on 40 x40 x 6mm angle frame with a clearance of at least 0.45 mtrs above GL and 0.30 mtrs below ground including required PCC for foundation complete all as specified and directed.
Supplying,installation,testing,commissioning in repairs outdoor type LT panel board 3 phase 4 wire system ,415 Volts ,50 Hz factory made free standing , floor mounting dust and vermin proof cubical type interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finally powder coate painting having thickness not less than 100 micronsof finite grey, fully compartmentalized with providing two Nos suitable size of aluminum strip for body earthing and including suitable PCC foundation all as specified for the following :-(a) Incomming :-(i) MCCB 200 AMPS 4 pole 415 Vollts 36 KA -01 No.(ii) Digital type amp meter 0-200 Amp with CT's 03 Nos. (iii) Digital type voltmeter 0-500 Volts -01 No. (iv) Indicating lamps (RYB) 01 set of 3. (v) Aluminium bus bar rating 300 Amps 3 phase neutral-01 set (vi) Chamber for incoming & outgoing cable. (b) Outgoing :- (i) MCCB 100 AMPS 25 KA 415 Volts 4 pole -2 No. (ii) MCCB 63 AMPS 16 KA 415 Volts 4 pole -2 No.
M&L in repairs earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 4.00 M deep below GL with top edge of plate not less than 3.00 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.
PANDEY TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .