Provision of Shed and Allied Services for Dhobi Ghat at INS Gomantak under GE Gomantak

Amount

Schedule 'A' Part -I B/R Portion

Excavation over areas not exceeding 1.5 m deep and getting out in soft/disintegrated rock complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock all as specified and as directed

M&L for Cement concrete (1:4:8) type D2 as in foundations, filling and mass concrete all as specified and as directed.

Use & waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar

Use & waste of formwork to sides of pilars,posts, struts, piers, columns and stanchions, rough finished surfacdes of concrete all as specified

Formwork to sides and soffits of roof beams, beam haunchings, girders, bressummers, including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

M&L for TMT bars 8 to 10mm dia in strrups cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

M&L for RCC M-25 (Design Mix) using (20mm graded stone aggregate) as in foundations footing, plinth beams, bases for columns and basement slab, under reamed piles and mass concrete complete all as specified.

M&L for RCC M-25 (Design Mix) using (20mm graded stone aggregate) as in columns, pillars, posts & struts complete all as specified.

M&L for RCC M-25 (Design Mix) using (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L for Pre-cast cement concrete type C1 (1:3;6) block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:4) complete all as specified and as directed.

Returning, filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm thick soil complete all as specified and directed

Removing excavated materials (soft/dis integrated rockl) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

M & L 15 mm thick rendering on fair faces of concrete in CM 1:6 finish the surface even & smooth without using extra cement complete all as specified and directed

M & L 15 ( 10+5) mm thick rendering in two layer on fair faces of concrete in CM 1:4 finish the surface even & smooth without using extra cement complete all as specified and directe( NOTE : II nd coat 5mm thick with WPC )

Supply only Liquid water proofing compound.

S&F for mild steel framed work such as grills, grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, ladders, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified

S&F Roof trusses Fe 410-W(Gde-E- 250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) incl distance pieces cleats et

S&F Steel rolling shutters 1.25mm thick with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shop coat of primer eraceted in position as indicated complete pull and push manual type as directed by Engr in Charge.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as directed by Engr in Charge.

M & L Hard core, broken to gauge n exc 63 mm for plinth protection/ under floor as directed by Engr in Charge.

M & L 100mm thick Cement concrete type B2 ( 1:2:4) 40 mm graded aggregate as in floor finish the surface even and smooth as specified .

M&L 20mm thick screed bed or bedding layer of cemnt mortar 1:4 for laying floor finishes.

M&L for rendering 10mm thick backing coat in CM 1:4 to receive tiles on vertical surfaces of wall

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L Non-skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exc 0.6 sqm but n exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match.over 15mm thick screed bed in CM 1:4.

M & L Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour tiles.

M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L sand filling under floors or in foundations including watering and consolidation

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment

S & F 35 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces all as specified and directed.

S & F Aluminium, anodised barrel tower bolts of extruded section and fixed complete. Length of bolt 150mm

S & F Extruded anodised aluminium alloy handles, fabricated type, of 150mm long.

S & F Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of 300mm long

S & F stainless steel Butt hinges, 100mm long, medium weight, complete all as specified.

M&L preparation of NEW wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over coat of pink primer.

S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

supply and fixing Aluminum powder coated deco grill make DG 104 (10 mm thick section ) with frame of section not less than 0.136 kg/rm

S&F 4mm thick sheet glass,ordinary qauality and glazing with oil putty in square n exc 05 sqm in each pane

S&F aluminium alloy anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of make M/S Kiran Netting or equivalent as approved by GE.

S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.

M&L 75mm thick cement concrete type, C2 1:3:6 using (40 mm graded aggregate) as in plinth protection finish the surface even and smooth all as specified and as directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for appling two coat of Anti corrosive paint over a coat of primer on new steel surfaces of any position not otherwise described over 10 cm width or girth including preparation of surfaces all as directed .

S&F Anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605x605mm.

Supply & Fixing 10 mm thick PVC insulation panels in ceiling board with EPS of net to 1mm printed PVC sheet suitably placed in false ceiling grid all as per specification and drawing

Material & Labour two coats of acrylic emulsion extenior paint (anti fungal painting-APEX or Equivalent) over a coat of acrylic amulsion primer including preparation of new concrete surface of any description all as specified and directed by Engr-in-Charge.

Material & Labour for providing two coats of oil-bound distemper over a coat of alkali-resistand primer on new plastered surfaces including necessary preparation to surfaces complete all as specified and as directed

Supplying and laying of 15 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge

Supply & Fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, for 2000 ltrs capacity.

S & F 25 mm dia Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule.

S & F PVC valveless, syphonic action type, flushing cistern, 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or level.

S & F Flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern

S & F Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets.

S & F Pillar taps, 15mm dia, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe .

S & F in repairs CP stop cock/angle cock 15mm dia, fancy type with capston heads screwed both ends for iron pipe or for unions and fixed

S & F in repairs Bib taps, 15mm dia, cast copper alloy, fancy type, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs.

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe .(Minimum weight 40gms)

S & F shower arm 15mm size,195mm long with bend of 45degree with flange of PTMT any colour. (Minimum weight 40gms).

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 190gms)

S & F PVC connections 15 mm size with PTMT nuts of length 600m fixed in repair.

M&L Cast iron nahani trap, with steel grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

Supply & Fixing in repairs vitreous china wash down water closet pan semi-pedestal pattern (Anglo-Indian Type) white (excluding fixing bolts, flushing cistern and flush pipe).

M & L 40 mm dia high density polyethylene pipes laid in floor/trenches/ west pipe of wash basin/spout pipe etc. complete all as specified.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls

Schedule 'A' Part -II E/M Portion (Internal Elect supply)

Material and labour for point wiring FRLS complete with 1100 V grade 1.5 Sqmm single core PVC insulated unsheathed multistranded copper conductor cable drawn through in and including non metalic rigid conduit of suitable dia ISI marked with all accessories concealed in wall, ceiling including 1.5 sqmm single core PVC insulated and unsheathed copper conductor cable as earth continuity wire including testing all as specified and directed by Engr-in-Charge for one light point, fan point, exhaust fan point controlled by one switch.

All as per serial item No 2 here-in-before but one 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Material and labour for point wiring complete as specified with 1100 V grade 4 Sqmm two runs of single core PVC insulated unsheathed multistranded copper conductor cable FRLS grade, conforming to relevant IS drawn through in and including non metalic rigid conduit of suitable siize (ISI Marked) with all accessories concealed in wall, ceiling, including sunk pressed steel terminal boxes made out of 2 mm thick MS sheet concealed in walls with 3 mm thick laminated Hylem sheet top cover fixed with brass screws for housing switches, socket etc including 4 Sqmm one run of single core PVC insulated and unsheathed copper conductor cable FRLS grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge for one 6 pin switch socket outlet 15 Amps on independent board controlled by one switch.

Supply and fix switch piano flush type single pole, one way 5 Amp.

Supply and fix switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal.

Supply and fix switch socket combination 2 in 1, 5 pin, 15 Amp flush type universal.

Supply and fix ceiling rose, surface bakelite, 65x50 mm, two to three terminals complete.

Supply and fix stepped type electronic fan regulator flush type on existing phenolic laminated sheet

Supply and fixing 40 Watts LED Batten fitting 4ft long ,Anodized extruded aluminium housing, high transmissitivity diffuser with high lumen output complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed by Engr-in-Charge.Make : Bajaj/Havells/Wipro/Philips.

Supply & Fixing integrated LED Bulk Head fitting surface/ceiling mounted round/square type with LED 10 watts ,IP 65 complete Make : Philips/Wipro/Bajaj/Havells

Supply & fixing exhaust fan 300mm sweep(metal body), heavy duty, 230 volts all as specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing ceiling fan 1200mm sweep (ISI Marked), 230 volts includung connection rod as per existing size of length of GI pipe medium grade complete with necessary hanging arrngements all as directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

M&L for Submain wiring with 4 run of 10 sqmm single core PVC insulated but unsheathed FRLS grade multi stranded 1100 Volts with copper conductor drawn in and including non metallic rigid Conduit of suitable dia ISI with all accessories such as tees, elbows, junction box Reducers etc conealed in wall along with 1 Run of 6 sqmm single core PVC insulated but unsheathed FRLS grade multi stranded 1100 Volts with copper conductor as continuous earth wire and connecting to Distribution Board and drying thumbler/ flat bed press including testing on completion complete all as directed. Note : 4 run of main cable, one run of earth cable with conduit will be measured as one length.

M&L for Submain wiring with 4 run of 6 sqmm single core PVC insulated but unsheated FR grade multi stranded 1100 Volts with copper conductor drawn in and including non metallic rigid Conduit of suitable dia ISIwith all accessories such as tees, elbows, junction box Reducers etc concealed in wall along with 1 Run of 6 sqmm single core PVC insulated but unsheated FRLS grade multi stranded 1100 Volts with copper conductor as continuous earth wire and connecting to Existing main switch board \ Distribution Board and Washing Extractor including testing on completion complete all as directed. Note : 4 run of main cable, one run of earth cable with conduit will be measured as one length.

M&L for Submain wiring with 4 run of 4 sqmm single core PVC insulated but unsheated FR grade multi stranded 1100 Volts with copper conductor drawn in and including non metallic rigid Conduit of suitable dia ISI with all accessories such as tees, elbows, junction box Reducers etc as required along with 1 Run of 4 sqmm single core PVC insulated but unsheated FRLS grade multi stranded 1100 Volts with copper conductor as continuous earth wire and connecting to Existing main switch board \ Distribution Board and Vaccum finishing table including testing on completion complete all as directed. Note : 4 run of main cable, one run of earth cable with conduit will be measured as one length.

S&F sheet metal enclosure TP +E with three pin and earth plug with socket complete incl one MCB TP 63A,415V complete all as directed.( for Washing Extractor & drying thumbler .)

S&F sheet metal enclosure TP +E with three pin and earth plug with socket complete incl one MCB TP 32A,415V complete all as directed.( for Vaccum finishing Table,and flat bed press)

Supply and fix sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amps,C series 240 Volts complete.

Supply and fix sheet metal enclosure (DB) for MCCB (Suitable for 160 Amps), vertical type,6 way, triple pole and neutral, 415 volts, double door with 250 Amps rated bus bar with IP 54- IK 09 Make : Legrand (Ekinox 3) or equivalent in C&S/Havells

Supply & Fix MCCB 415V, 3 phase 50 HZ FP 125 Amps breaking capacity 25KA. Make Legrand/ Schneider/C&S Note MCCB Should suitable to fit in VTPN DB (item No 19 )

Supply and fix MCB, single pole, 6 Amp to 32 Amp, 240 Volts, 'C' Curve 10KA. Make: Legrand /C&S/Schneider /Havells/L&T

Supply and fix MCB, Triple pole , 40 -63 Amp, 415 Volts, 'C' series 10 KA. Make: Legrand /C&S/Schneider /Havells/L&T

M&L for earthing complete with GI steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including necessary earth work and excavation of in any type of strata, PCC 1:3:6 type C-2 GI tubing 20 mm dia for watering and 15mm dia GI tubing for protection of wire etc all as per electrical plate No.5 of SSR part I including connecting to electrical equipments and testing on completion.

Supply & installed storage type water heater (Geyser,Vertical type) capacity 50 Ltrs five star rating with non-metallic body prefixing and grouting work for mounting nuts, bolts and washer etc in wall and connecting new inlet/outlet pipes electrical/earthing connections and carrying out testing for proper functioning including hot and cold connection pipes all as specified and directed. Make : Havells (GHWAMGSWH050)/Bajaj /V-Guard (i) hot and cold pipes will be measured and paid seaprately. (ii) Cost of removing old nuts bolts and matching the wall with exixiting surafce, grouting work and reqd mounting nuts ,bolts etc deemed to be included in the quoted rates.

Supply & fixing wall mount fan 400mm sweep (ISI marked) 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Schedule 'A' Part -II E/M Portion (External Water supply)

Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil

Supply and laying of 50mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitting in trenches complete all as specified.

Supply and laying of 25mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitting in trenches complete all as specified.

Supply and Fixing Gun metal Globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in 25mm dia pipe.

M& L for cutting existing GI Pipe line for making tapping point connection including fittings required for tapping poin.

M/s Abhay Enterprises

M/S jvsr constructions

M/S G.N.POWAR

Tara Construction

CVs CONSTRUCTIONS

M/s J.D. DESAI