REPAIRS TO STEEL AND WOODEN FURNITURE AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

REPAIR TO CHAIR WRITING MAP FD/E6/MAP/12 : -(a) Removal of old U/S tapestry of seat frame and S&F new tapestry of seat frame approved by Engr-in-charge with PVC liping all round complete all as specified and directed by Engr -in charge Note- Cost of tapestry not less than Rs 300/-

(b) All as per Srl item No 1 above but back frame

(c) Removal of old u/s hand rest of chair writing MAP and S&F new hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front, complete all as specified and directed by Engr-in-charge

(d) Removal of old U/S leg frame and S&F new leg frame of cantilever type MS tubular frame of size 25mm x 10mm complete all as specified and directed by Engr-in charge

(e) Removal of old U/s foam cushioned from seat & back and S&F new moulded foam cushioned 40 density, 50mm thick as shape and size and fixed over 12mm thick hot pressed plywood with PVC liping all round, complete all as specified and directed by Engr -in charge

(f) Taking down old U/S Rubber stopper and S&F new Rubber stopper at the bottom of leg.

(g) M&L for painting to iron surface of chair writing MAP with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engr -in charge

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES :- FD-67 (M)/351/1031:- (a) Removal of old existing U/S shutter (Single Leaf) of almirah large steel and S&F new shutter made of 1 mm thick PGI sheet as per existing shape and size incl one coat synthetic enamel paint over one coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

(b) All as per Srl item No 08 above but Shelves

(c) All as per Srl item No 08 above but Cover plate of locks

(d) Removing U/S lock of almirah large and S&F new brass lock 6 levers Godrej pattern as per existing size with duplicate keys complete all as specified and directed

(e) Removing of old U/S lock assembly and S&F new lock assembly of 10 mm dia MS rod as per trade pattern incl one coat synthetic enamel paint over one coat red oxide primer and preparation of new steel surfaces complete all as specified and directed.

(f) Removing of old U/S handle of almirah and S&F new chromium plated steel handle of existing shape and size complete all as directed

(g) Removing of old U/S key plate and S&F of new Chromium plated key plate fixed with screw and nuts of almirah large steel complete all as directed.

(h) Removing of old U/S leg of almirah large steel and S&F new leg made of 1 mm thick PGI sheet with Gas welding as per existing shape and size incl one coat synthetic enamel paint over one coat red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

(j) M&L for painting spray painting of almirah large steel with one coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.

REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES FD-67 (M)/350 /1032 :- (a) All as per Srl item No 08 above but shutter of Almirah Medium

(b) All as per Srl item No 08 above but Shelves of Almirah Medium

(c) All as per Srl item No 08 above but Cover plate of locks of Almirah Medium

(d) All as per Srl item No 11 above but locks of Almirah Medium

(e) All as per Srl item No 12 above but lock assembly of Almirah Medium

(f) All as per Srl item No 13 above but Handle of Almirah Medium

(g) All as per Srl item No 14 above but Key Plate of Almirah Medium

(h) All as per Srl item No 15 above but Legs of Almirah Medium

(j) All as per Srl item No 16 above but Painting of Almirah Medium

REPAIR TO LOCKER BED SIDE STEEL FD-257/1029 (a) All as per Srl item No 08 above but shutter of Locker steel

(b) All as per Srl item No 08 above but shelves of Locker steel

(c) All as per Srl item No 13 above but Handle 'D' type of Locker steel

(d) All as per Srl item No 15 above but Legs of Locker steel

(e) All as per Srl item No 16 above but Painting of Locker steel

(f) Removing of old U/S haps and stapple and S&F of new Chromium plated haps & stapple fixed with rivets of locker steel complete all as directed.

REPAIR TO TABLE DINING OR's FD-165(M):- (a) Supply and fixing in replacement including welding mild steel square tube of size 25mm x 25mmx 1.6 mm thick as in frame complete all as specified as directed and as shown on drawing.

(b) Supply and fixing in replacement of top with 18 mm thick block board of size 1900 mm x 685 mm with aluminium sheet 22 guage on top complete all as specified , as directed and as shown on drawing.

REPAIR TO CHAIR CB STEEL WITH ARMS FD-75(M):- (a) Removal of old U/S seat frame and S&F new seat frame of 1st class hard shisham wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.

(b) All as per Srl item No 34 above but back frame

(c) Removal of old u/s arms of chair CB steel with arms and S&F new arms made of 1st class hard shisham wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed.

(d) M&L for painting to chair CB steel with arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

REPAIR TO CHAIR VERANDAH FD-256/259/359 (a) S&F in repair following part of chair verandah as per existing shape and size as shown on drawing complete all as specified and directed:- Legs with arm rest of 19mm dia MS conduit 1.5mm thick incl one coat synthetic enamel paint over one coat red oxide primer .

(b) Seat frame of 19mm dia MS conduit 1.6mm thick incl one coat synthetic enamel paint over one coat red oxide primer

(c) Back frame of 19mm dia MS conduit 1.6mm thick incl one coat synthetic enamel paint over one coat red oxide primer

REPAIR TO TABLE OFFICE CLK/TYPIST STEEL FD-84(M)/1004 :-(a) Taking down old U/S top of table Clk/Typist and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed.

(b) Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with one coat synthetic enamel paint over one coat red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(c) Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

(d) Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge MS tube fixed by gas welding incl one coat synthetic enamel paint over one coat red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(e) All as per Srl item No 44 above but short rails

(f) All as per Srl item No 44 above but stiffener

(g) All as per Srl item No 44 above but legs

(h) Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

(j) M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

REPAIR TO TABLE 3' x 3' STEEL FD-1009:- (a) Taking down old U/S top of table 3' x 3' and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed.

(b) Taking down old U/S long rail table office 3' x 3' and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge MS tubes fixed by gas welding incl painting with one coat synthetic enamel paint over one coat red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr -in charge

(c) All as per Srl item No 51 above but short rails

(d) All as per Srl item No 51 above but stiffener

(e) All as per Srl item No 51 above but legs

(f) Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

(g) M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr -in charge

REPAIR TO SIDE RACK WITH TRAY STEEL FD-1023:- (a) Removal of old u/s Shelves of side rack with tray steel and S&F new shelves made of 1mm thick PGI sheet as per existing shape and size incl one coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed

(b) Removal of old u/s legs of side rack with tray steel and S&F new legs of size 40x40x3mm angle as per existing shape and size incl one coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed

(c) M&L for painting to iron surface of side rack with tray steel with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engr -in charge

REPAIR TO RACK 6 TIER STEEL FD-1038:- (a) Removal of old u/s Shelves of rack 6 tier steel and S&F new shelves made of 1mm thick PGI sheet as per existing shape and size incl one coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of newsteel surfaces complete all as specified and directed

(b) All as per Srl item No 60 above but back

(c) All as per Srl item No 60 above but side

(d) All as per Srl item No 60 above but top

(e) Removal of old u/s legs of rack six tier steel and S&F new legs of size 40x40x3mm angle as per existing shape and size incl one coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed

(f) M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

REPAIR TO CHAIR CB STEEL WITHOUT ARMS FD-75(M) :- (a) Removal of old U/S seat frame and S&F new seat frame of 1st class hard shisham wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.

(b) All as per Srl item No 66 above but back frame

(c) M&L for painting to chair CB steel without arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

FORM WITH OUT BACK FD-77(M):- (a) Removal of old U/s plank of form with out back and S&F new plank of form without back of size 1525mm x 255mm x 25mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts (09 Nos) complete all as specified and directed by Engr -in charge.

(b) M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

FORM WITH BACK FD-78(M):- (a) Removal of old U/s Seat plank of form with back and S&F new Seat plank of form with back of size 1800mm x 255mm x 25mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts complete all as specified and directed by Engr -in charge.

(b) Removal of old U/s Back plank of form with back and S&F new back plank of form with back of size 1800mm x 150mm x 19mm made out of 1st class hard wood (teak wood) including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts complete all as specified and directed by Engr -in charge.

(c) M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

REPAIR TO TABLE OFFICE OFFICER STEEL FD-1003:- (a) Taking down old U/S top of table office officer steel and S&F new top of 18mm thick pre-laminated particle board exterior grade one side shisham face and other side white balancing including 4mm thick shisham wood beading complete all as specified and directed.

(b) Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with one coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(c) Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

(d) Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge MS Tube fixed by gas welding inclone coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

(e) All as per Srl item No 77 above but short rails

(f) All as per Srl item No 77 above but stiffener

(g) All as per Srl item No 77 above but legs

(h) Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

(j) M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

REPAIR TO GI PIPE CHARPOY WITH NYLON NEWAR FD-220:- (a) S&F in replacement of u/s Elbow galvanized iron 32 mm dia 3 ways complete all as specified and directed. Note weight of each elbow not less than 450 grams

(b) S&F in replacement of u/s check nut galvanized iron 32 mm dia, complete all as specified and directed Note :- weight of each check nut not less than 125 grams

(c) S&F in replacement of long rail of 32 mm dia galvanized iron pipe medium grade incl cutting threading at both ends complete all as specified and directed

(d) Fixing only in repairs short rail of 32 mm dia GI pipe medium grade incl cutting, threading as required for short rail of GI Charpoy complete all as specified and directed Note :- short rail shall be converted from long rail retrieved vide item No 85 above.

(e) Fixing only in repairs legs of 32 mm dia GI Pipe medium grade cutting, threading at one end as required for legs as per existing size incl S&F 1.6 mm thick, 40 mm dia MS Sheet base plate welded on another end complete all as specified and directed. Note :- Legs shall be converted from pipe retrieved vide item No 86 above.

Removing old UNSV nylon newar from the frame of charpoy GI pipe and tightening the frame and making it suitable for and including supply and fixing 12mm thick BWR plywood and also supply and fixing MS Flat iron of size 40mm x 3mm thick and 900mm long -02 Nos alongwith plwood top and fixed with 6mm dia 65mm long brass coated nuts & bolt with 02 Nos washers including drilling 04 Nos holes on each long rail and 02 Nos holes on each short rail and 03 Nos holes on each MS Flat iron, all as directed by Engr-in-charge. Note :- MS flat iron should be paint two coats of black synthetic enamel paint over a coat of red oxide paint

RE-CANNING TO CHAIR VERANDAH FD-256/259 :- Taking out old U/S cane from chair verandah and recanning seat and back with new 4 mm wide half round white plastic cane of superior quality incl painting with one coat of white synthetic enamel paint and preparing of old steel surfaces.

REPAIR TO CHAIR REVOLVING TP:- (a) Removal of old U/S tapestry of seat frame and S&F new tapestry of seat frame approved by Engr-in-charge with PVC liping all round complete all as specified and directed by Engr -in charge Note- Cost of tapestry not less than Rs 300/-

(b) All as per Srl item No 90 above but back frame

(c) Removal of old u/s hand rest of chair revolving and S&F new hand rest one piece made of black integral skin,reinforced with MS insert it complete all as specified and directed by Engr -in charge

(d) Removal of old U/S pedestal assembly and S&F new pedestal assembly complete all as specified and directed by Engr -in charge

(e) Taking down old U/S twin wheel coasters and S&F new twin wheel coasters press fitted at the bottom of leg.

REPAIR TO CHARPOY MS TUBE WITH PLYTOP FD/MAP-II/01 Removal of old U/s plywood from charpoy MS tube with plytop and S&F 12mm thick ply wood top of size 1950mm x 900mm (Single piece)BWR Grade ISI Mark with MS screws, complete all as specified and directed by Engr -in charge

BED HARD STEEL FD/E6/MAP/08(R) :- (a) Removal of old U/s plywood from bed hard steel and S&F in repairs 12mm thick ply wood top of size 1950mm x 900mm (Single piece)BWR Grade ISI Mark with MS screws, complete all as specified and directed by Engr -in charge

(b) Removal of old U/s pre-laminated particle board head side from bed hard steel and S&F in repairs 18mm thick pre-laminated particle board head side with MS screws, complete all as specified and directed by Engr -in charge

(c) Removal of old U/s pre-laminated particle board foot side from bed hard steel and S&F in repairs 18mm thick pre-laminated particle board foot side with MS screws, complete all as specified and directed by Engr -in charge

(d) Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

REPAIR TO CHAIR CBA SPECIAL WITH HAND REST FD-120 (M):- (a) Removal of old U/S seat frame and S&F new seat frame of 1st class hard shisham wood duly planned and finished smooth duly polished with high class black polish incl weaving with 2 mm wide plastic cane half round with Godrej pattern & border with 3 mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified and directed.

(b) All as per Srl item No 100 above but back frame

(c) Removal of old u/s wooden planks hand rest of chair CBA special with hand rest and S&F new wooden plank hand rest made of 1st class hard shisham wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed.

(d) M&L for painting to chair CBA special with hand rest with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

SOFA SET 4/5 SEATER FD-281/373:- (a) S&F of cushion foam for sofa set size 525x525x100mm, 32 density (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

(b) M&L for polishing of sofa set 4 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

(c) M&L for polishing of sofa set 5 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

BED PLY WOOD TOP FD-246/247:- S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Head rest

(b) Foot Rest

(c) Long rails and shall be made of Ist class hard wood (Shisham)

(d)Short rails and shall be made of Ist class hard wood (Shisham)

(e) Stiffener and shall be made of Ist class hard wood (Shisham)

(f) MS bracket of flat iron 25x3mm,200mm long fixed with screw

(g) Ply wood top 12mm thick BWR plywood as per existing shape and size in One piece

(h) M&L for polishing of bed Plywood top with high class French polish to all exposed surfaces except top & bottom after preparation of surfaces complete all as specified and directed.

CHAIR DINING FD-16(M)/203/ 279 :- S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Rear Legs

(b) Front Legs

(c) Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(d) Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(e) Bottom stiffener

(f) Back stiffener

(g) M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WRITING FD-20(M)/202/280:- S&F in repair following part of chair writing with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Rear legs

(b) Front Legs

(c) Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(d) Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

(e) Bottom stiffener

(f) Back stiffener

(g) Arm rest

(h) M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY FD-17(M)/201/229:- S&F in repairs following parts of the chair easy with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. (a) Rear Legs

(b) Front Legs

(c) Side Rails

(d) Front/Back Rails

(e) Back Stiffener

(f) Bottom Stiffener

(g) Arms rest

(h) M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

REPAIR OF PEG TABLE FD-236/266 /277/384 :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed. (a) Legs

(b) Long rail

(c) Short rail

(d) Side stiffener

(e)Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed

(f) M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE DINING 06/08 PERSON FD-239/269 /273:- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed. (a) Taking down old U/S top of table dining 06/08 pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

(b) Legs

(c) Long rail

(d) Short rail

(e) Stiffener

(f) M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

REPAIR OF TRESTLE STORE ROOM WOODEN FD-141(M):- Repair of following parts of trestle store room wooden as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Taking out u/s legs of trestle store room wooden, supply and fixing of new leg of size 400mm x 100mm x 100mm of first class teak wood, as per drg

(b) Taking out u/s rails of trestle store room wooden, supply and fixing of new rail of size 2440mm x 100mm x 100mm of first class teak wood, as per drg

(c) Taking out u/s centre stiffener of trestle store room wooden, supply and fixing of new centre stiffener of size 1220mm x 65mm x 100mm of first class teak wood, as per drg

(d)Taking out u/s side stiffener of trestle store room wooden, supply and fixing of new side stiffener of size 1980mm x 65mm x 100mm of first class teak wood, as per drg

(e) M&L for Creosote oiling of trestle store room wooden with creosote oil on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

REPAIR OF TEAPOY FD-232/ 278/382 : S&F in repair of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly planned shown on drawing complete all as specified and directed:- (a) Legs

(b) Long rail

(c) Short rail

(d) Side stiffener

(e) Centre stiffener

(f) Top-Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed

(g) M&L for polishing of teapoy with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

TABLE WRITING FD-275: S&F in repair to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.:- (a) Legs

(b) Long rail of table frame

(c) Short rail of table frame

(d) Drawer including chromium plated knob of 40mm Dia

(e) Bottom centre stiffener

(f) Bottom side stiffener.

(g) Taking out old U/S top and S&F new top of pre-laminated particle board one side teak wood face incl 6mm thick teak wood beadging all round top duly high class French polished complete all as shown in drg and directed.

(h) M&L for polishing of table writing with high class French polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed.

REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER FD-231/284:- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as specified and directed :-(a) Legs

(b) Long Rail

(c) Short Rail

(d) Bottom Side stiffener

(e) Bottom Centre stiffener

(f) Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all ound complete all as shown in drg and directed

(g) M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR TO TABLE 900mm x 600mm WITH DRAWER FD-283:- S&F in repair of the following parts of table 900mm x 600mm with drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as specified and directed:- (a) Legs

(b) Long Rail

(c) Short Rail

(d) Bottom Side stiffener

(e) Bottom Centre stiffener

(f) Drawer

(g) Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all ound complete all as shown in drg and directed

(h) M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR OF TABLE DRESSING LADIES FD-32 (M)/ 251:- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

(b) Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

(c) Removal of old U/S sliding glass and fixing new glass of 3mm thick as per existing.

(d) Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

(e) Removal of old U/S leg of table and fixing new legs of ist class hard wood (teak)

(f) Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

REPAIR TO SIDE BOARD FD-241 : S&F in repair to the following parts of side board as per existing shape and size duly planned complete all as specified and directed. (a) Top

(b) Bottom

(c) Side

(d) Shelves

(e) Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated particle board front

(f) Shutter with 40mm size knob

(g) Back shall be made of 6mm thick commercial plywood.

(h) Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (teak)

(j) M&L for polishing of side board with high class French polish on all exposed surfaces except topand bottom incl after preparation of surfaces complete all as specified and directed

REPAIR OF TABLE BED SIDE FD-248 /276: S&F in repair of the following parts of Table Bed Side with 18mm th pre-laminated particle board as per existing shape and size duly planned and wrought finished as shown on drawing complete all as specified and directed: -(a) Top

(b) Side

(c) Shelf

(d) Bottom

(e) Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed

(f) Ist class hard wood (teak) 6mm thick beading at front on 18 th pre-laminated particle exposed portion of table bed side

(g) Ist class hard wood (teak) frame with 4 nos of legs duly french polish.

REPAIR TO TABLE CENTRE FD-235/274:-S&F in repair of the following parts of table centre with Ist class wood (teak)As per existing shape and size duly planned as shown on drawing completed all as specified and directed:-(a) Legs

(b) Long rail

(c) Short rail

(d) Side stiffener

(e) Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 4mm thick wood beading all round the top complete all as specified and directed

(f) M&L for polishing of Table Centre with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE 900mm x 900mm FD-88(M)/ 291:- S&F in repair following parts of the table 900x900mm with Ist class hard wood (teak) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed :- (a) Legs

(b) Long rail

(c) Short rail

(d) Table top of 18/19MM thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thick teak wood edging all round complete as shown in drg and directed.

(e) M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

REPAIR OF TABLE DRESSING GENTS FD-31 (M)/230:- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

(b) Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

(c) Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

(d) Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

CHAIR EASY WITH CUSHION FD-358: - S&F in repairs following parts of the chair easy with cushion with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed :- (a) Rear Legs

(b) Front Legs

(c) Side Rails

(d) Front/Back Rails

(e) Back Stiffener

(f) Bottom Stiffener

(g) Arms rest

(h) S&F of cushion foam for chair easy 28 density 75mm thick (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

(f) M&L for polishing of chair easy with cushion with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

RE-CANNING OF CHAIRS FD-228,229, 279,280,252,244 :- Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool,Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed.

REPAIR TO BENCH WORKSHOP WOODEN FD-301:- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed. (a) Taking down old U/S top of bench workshop wooden and S&F new top of 40mm thick 1st class hard wood complete all as specified and directed.

(b) Removing of old unserviceable drawer and S&F of new drawer made of 6 mm thich plywood complete all as specified and directed.

(c) Legs

(d) Long rails

(e) Short rails

(f) Stiffener

(g) M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

REPAIR OF RIFLE RACK HQ/134/F/22/89:- Repair of following parts of rifle rack as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- (a) Taking out u/s top for hanging the rifle of rifle rack and supply and fixing of new top of first class teak wood, as per drg.

(b) Taking out u/s Base of rifle rack and supply and fixing of new base of first class teak wood, as per drg

(c) M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

CHAIR DINING LONG BACK FD-357:- S&F in repair following part of chair dining long back of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed:- (a) Rear Legs

(b) Front Legs

(c) Side rail of seat frame

(d) Front/back rails of seat frame

(e) Foam cushioned of 50mm, 28 density with fabric on seat of 12mm thick ply

(f) Foam cushioned of 50mm, 28 density with fabric on back of 12mm thick ply

(g) Bottom stiffener

(h) Nylon buffers on the bottom of legs

(j) M&L for polishing of chair dining long back with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

REPAIR TO TABLE 600mm x 600mm FD-231/284:- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as specified and directed :- (a) Legs

(b) Long Rail

(c) Short Rail

(d) Bottom Side stiffener

(e) Bottom Centre stiffener

(f) Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all ound complete all as shown in drg and directed

(g) M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

Shri Maruti Trading Co.

M/s godara infratech and power industries

Lalit and Brothers

PRAFUL ENTERPRISES

SK INDUSTRIES