REPAIR TO DRAINAGE SYSTEM, FENCING, BOUNDARY WALL, HARD STANDING AND GATES AT VARIOUS LOCATIONS UNDER AGE B/R-II AT AFS KANPUR

Amount

Demolition of brickwork or stone / boulder masonry, built in cement mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M & L for PCC (1:3:6) type C- 2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for brick work old size with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed.

Ditto all as per item No.5.00 here-in-before but except bricks.

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement mixed with liquid water proofing compound @ 200 ml per bag of cement and applying two coat of cement base paint after preparation of surfaces complete all as specified and directed. (Note :- WPC shall be measured & paid separately under relevant item of Sch 'A' ).

Supply only liquid water proofing compound of approved make complete all as specified and directed.

M & L for preparing of old decorated surface and applying one coat of cement base paint complete all as specified and as directed.

Demolition of reinforced cement concrete of any description complete all as specified and directed.

M & L for precast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in manhole cover / drain covers set in CM (1:6) etc including necessary form work complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drain, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for 100 mm thick PCC (1:4:8) Type D-2 using 20 mm graded stone aggregate as in sub base and mass concrete complete all as specified and directed.

M & L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drive ways or light traffic parking etc, of required strenth, thickness & size shape mady by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in flooring / paving / plinth protection including finishing even & smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling fencing wire mesh of any description complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) of any section, including taking out embedded section in concrete or brick portion and making good to disturbed surfaces complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick complete all as specified and directed.

M & L for PCC (1:2:4) Type B-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as fillets (for securing wire mesh, drilling holes notching for wire, flat iron,etc.) and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F in repair galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs @ 75 mm spacings c/c and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and directed (each line wire to be measured).

Restraining and re-scuring of galvanised 2 strand, steel barbed wire of any description including making good staples etc and refixing to any type of standard rails strain- ing bolts, securing or tying at crossings complete all as specified and directed.

M & L for two coats of synthetic enamel paint over a coat of red oxide on steel surface complete all as specified and directed.

Supply only chain link fencing MS galvanised fencing of any size or any type complete all as specified and directed.

Fixing only chain link fencing or welded wire mesh of any description complete all as specified and directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and / riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and directed.

M & L for preparation of old painted steel surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any decsription and applying one coat of aluminium paint complete all as specified and as directed.

M & L for 20 to 25 mm thick mirror polished machine cut kota stone slab flooring over and includindg 15 mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 20 to 25 mm thick mirror polished machine cut kota stone slab in riser of steps, skirting, dado and pillar laid over 10 mm thick plaster in CM (1:4) complete all as specified and directed.

Removing building materials or debris etc. to a distance exceeding 5 Km including loading, unloading and stacking at the destination as ordered complete all as specified and directed.

M & L for 150 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in wear resistance tremix flooring by use of vacuum dewatering method and finished with power floater including necessary form work complete all as specified and directed. Note- The floor shall be provided with non metallic floor hardner @ 5kg/Sqm & quoted unit rate deemed to be included supplying of non metallic floor hardner also.

Forming Construction joint of size 30 mm deep and 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Forming contraction (Dummy) joint of size 50 mm deep and 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed.

S & F in repair 200 mm bore reinforced concrete pipes, class NP-2 pipe laid and jointed complete with collars complete all as specified and directed.

M & L for framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed.

S & F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

S & F in repair steel rolling shutters, made out of 1 mm thick steel lathing without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type complete all as specified and directed.

S & F in repair steel rolling shutters made out of 1.25 mm thick steel lathing, gear operated type with bevel gear box and crank handle including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, completely gear operated type with bevelled gear box and crank handle complete all as specified and directed.

YS CONSTRUCTION

smc system & services

M/S ASM ENTERPRISES

M/S SDS Construction Co.

SAXENA BANDHU

DIAMOND ENTERPRISES

JEEWAN BUILDERS AND ENGINEERS